Here you'll find direct links to the different colour guides for painting WWII miniatures I wrote over the past couple of years. -Simply ...
Here you'll find direct links to the different colour guides for painting WWII miniatures I wrote over the past couple of years. -Simply ...
Here you'll find direct links to the different colour guides for painting WWII miniatures I wrote over the past couple of years. -Simply ...
A few people have asked me to do a quick tutorial about my approach to WWII splinter pattern or officially "Buntfarbenmuster 31".
The attacks, which took place September 1940 and May 1941, killed more than 43,000 people and left more than one million homeless, and inflicted unparalleled devastation across the capital.
Part of 'Sitzkriegheroes Hollfeld' since 2012
A few people have asked me to do a quick tutorial about my approach to WWII splinter pattern or officially "Buntfarbenmuster 31".
A few people have asked me to do a quick tutorial about my approach to WWII splinter pattern or officially "Buntfarbenmuster 31". Please remember I'm not doing a 1:1 replica of the original pattern but a version suited to be viewed at gaming distance. When referred to Vallejo colours go for the Vallejo Model Colour line of products. The figure used is a German Fallschirmjäger from Warlord Games. So here we are: Step 1: Priming and basing the model So far nothing new here. For basecoating "Acrylic-Polyurethane Black Surface Primer" by Vallejo is used. It gives a nice flat finish when applied by airbrush and can be brushed on to touch up areas not covered with the airbrush. Of course you can still use any kind of base coat you're used to. Step 2: Base colour and black lining Now the schmocks base color is painted on using Foundry "Moss 29A" . Any light yellowish green or even Vallejo "Iraqui Sand" mixed with a little green will do. I also used Vallejo "Buff" already and it looked nice but I prefer a more greenish tone even when the original pattern tends to be more greyish in tone. As a big fan of black-/ dark lining I pay attention to let the black base coat be visible at the seams and around items of equipment. To me it makes the figure pop in the end but it's definitely not essential to get a nice camo done. Step 3: Middle tone Now the middle tone is brushed on using Foundry "Moss 29B" leaving the base colour visible in the deeper folds of the cloth. As before you can use any light yellowish green. Step 4: Highlight Now the highlights are set by carefully brushing on thin lines of Foundry "Moss 29C" on the most raised areas of the schmock. And here we are... the most boring part is done. Step 5: The brown patches Using Vallejo "Hull Red" the brown patches are painted on. In my opinion it's easiest to start at the corners and/ or seams and paint on simple triangles. Be careful to paint sharp tips for the triangles as it's the most important part to make the camo look right. You'll see it will not look half as decent when you paint on simple brown blobs. For the patches not placed at the corners or seams it's best to stay with randomly set triangles and join two or more (being close of each other of course) by a simple thick line (like above the gas mask canister or below the haversack). Step 6: Highlighting the brown patches In this step the brown patches are highlighted. Therefore I used a roughly 70:30 mix of Vallejo "Flat Brown" and Vallejo "Iraqui Sand" giving you a nice terracottaish brown. The mix is painted on leaving only the edges and maybe the deepest recesses (for example at the crook of the arm) of the Vallejo "Hull Red" visible. Step 7: The green patches For the green patches I used Vallejo "Olive Green" using a roughly 3:1 ratio i.e. 3 brown patches to 1 green patch. Again it looks best when you pay attention to sharp tips. Be careful to attach most (but not all) of the green patches to the brown ones. Step 8: Highlighting the green patches For highlighting the green patches the same approach is used as for the brown ones. The colour used is a roughly 60:40 mix of Vallejo "Luftwaffe Camo Green" and Vallejo "Golden Olive". For simple gaming needs you could end here and still have a very presentable version of the Buntfarbenmuster. Alternatively you also can do it without all the highlighting of the patches and apply a coat of your preferred wash or dip. But remember to go for lighter colours then as the wash will tone down the colours quite a bit. Step 9: The "Raindrops" Some would argue that the so called "Raindrops" wouldn't even be visible at this scale, especially at gaming distance... and you're perfectly right. But for me the raindrops are the cherry on the cake of painting this very camouflage. It's almost like painting eyes... for some people it's absolutely needless - for the others (like me) it's the last bit of effort which brings the figure (or in this case the camo) alive. But I disgress... For the raindrops a very thin brush (I already tried it using a needle with some success) is used and simple pairs of fine lines of Vallejo "German Camo Dark Green" are painted on vertically. I only paint on pairs because it's only ment to represent the raindrops. Trying stay historically accurate and paint on more would cover the whole schmock with these lines and ruin the effect. I hope this little tutorial might be of any use to at least some of you. I'd also like to hear about your approach to the splinter camo. So, I hope you enjoyed and thanks for reading!
Luftwaffe camouflage schemes: an illustrated guide to the mimetic patterns applied on German aircraft during the Second World War.
See below for images of WWII German Uniforms, including a breakdown of the clothing and equipment pictured and Vallejo paint references.
In the 63 years and 219 days the Queen has reigned, she hasn’t put a foot wrong when it comes to her wardrobe, which is impressive, considering she changes outfits up to five times a day.
See below for images of WWII German Uniforms, including a breakdown of the clothing and equipment pictured and Vallejo paint references.
SIZE GUIDE: S - 34/36” M - 38/40” L - 42/44” XL - 46/48” 2XL - 50/52” T-SHIRTS: Classic fit Durable garment, Double Needle Stitching 100% Cotton Garment HOODIES: Classic fit, double material hood, matching drawstring. Pre shrunk Durable garment, cuffed sleeves & Double Needle Stitching 100% Cotton Garment, air jet yarn SWEATSHIRTS: Classic fit, pre-shrunk, drop shoulder style Durable garment, cuffed sleeves & Double Needle Stitching Garment 50% Cotton 50% Dry blend POLOS: Contoured welt collar 3 woodtone buttons Twin needle bottom hem Moisture wicking fabric 50% Cotton, 50% Polyester Made to order by us, in the UK Printed design on front of garment – no back print Select garment style, colour and size from drop down menu Available Sizes S – XXL Free UK shipping Returns accepted CARE: Machine Wash inside out at 30 Degrees, Tumble Dry Low and Iron low inside out.
A list of some of the most captivating historical photographs that have been colorized and shared on the History in Color Instagram account!