つくってあそべる画像メーカー「Picrew（ピクルー）」です。自分のイラストで、画像メーカーをつくれる！つくった画像メーカーで、みんなであそべる！
YSDメーカー｜Picrew Source: picrew.me/image_maker/1387003
Attached: 4 images 【コミティア】新刊「TIPS!」はその名の通りTIPS本です。SNS等に投稿してきたものと描き下ろしを60ページにまとめました。他のサンプルや委託など詳細は→ https://www.fanbox.cc/@yoshidaseiji/posts/2316318 #COMITIA
Theatre — Mimi Lien
Login Screen Ui designed by Suman Sil. Connect with them on Dribbble; the global community for designers and creative professionals.
Amidst the northern mountains, you can find a habitat of unique two-headed predators. A local barbarian tribe has a tradition: to become a man, you must hunt down this dragon or die with glory; the rest is unacceptable. It takes years of preparation, as only one mistake will lead to death by either poison or being crushed with its tail. By studio artist: Kirpichnikov Vitaly
Please read our article for all the details and credits: https://airbornstudios.artstation.com/blog/zXDEq/in-which-we-cherish-and-bid-adieu-to-project-dragon-part-3-3d-characters Project Dragon was a multiplayer sandbox action-adventure that was in the making at Phoenix Labs. Picture something like Minecraft meets Breath of the Wild sprinkled with some elements from games like Stardew Valley, set in a universe not based on any existing IP. We got to contribute a lot of concepts, 3D environment assets, props, and 3D characters work over the course of 3 years. Sadly, the game was canceled a short while ago. While it breaks our hearts that you will never get to see Dragon (a codename, obviously) in its fully realized form, we're grateful that we are allowed to show the work we contributed, providing a glimpse at this wonderful and whimsical world that we loved to work on alongside a terrific team at Phoenix Labs that we loved to work with. Concepts done by Nicholas Kole!
See the street style trends PS editors Jessica Andrews, Sarah Wasilak, and Kyley Warren wore at Fashion Week to attend runway shows and presentations.
｢ハグして！｣と言ってみた dnj ak ysd #チェ夢
Yoana Studio Design, YSD, Graphic Design, graphic design poster, poster design, photoshop, photoshop design, blurred world, blurred poster design, blurred poster, photoshop poster design, photoshop graphic design, graphic designer, vintage poster design, minimalist poster, minimalist poster design, red poster, red poster design
/* 4 digit 7 segment display: http://www.sparkfun.com/products/9483 Datasheet: http://www.sparkfun.com/datasheets/Components/LED/7-Segment/YSD-439AR6B-35.pdf 7 segments + 4 digits + 1 colon = 12 pins required for full control */ // modified connexion by niq_ro from http://nicuflorica.blogspot.com // for my Luckylight KW4-563ASA // dataseet: http://www.tme.eu/ro/Document/dfc2efde2e22005fd28615e298ea2655/KW4-563XSA.pdf int digit1 = 11; //PWM Display pin 12 (digit1 is common anonds A1 from right side) int digit2 = 10; //PWM Display pin 9 (digit2 is common A2) int digit3 = 9; //PWM Display pin 8 (digit3 is common anods A3) int digit4 = 6; //PWM Display pin 6 (digit4 is common anods, from left side) //Pin mapping from Arduino to the ATmega DIP28 if you need it //http://www.arduino.cc/en/Hacking/PinMapping int segA = 2; //Display pin 11 int segB = 3; //Display pin 7 int segC = 4; //Display pin 4 int segD = 5; //Display pin 2 int segE = 12; //Display pin 1 int segF = 7; //Display pin 10 int segG = 8; //Display pin 5 int segDP = 13; // Display pin 3 #include #include "RTClib.h" RTC_DS1307 RTC; // Date and time functions using a DS1307 RTC connected via I2C and Wire lib // original sketck from http://learn.adafruit.com/ds1307-real-time-clock-breakout-board-kit/ // add part with SQW=1Hz from http://tronixstuff.wordpress.com/2010/10/20/tutorial-arduino-and-the-i2c-bus/ // add part with manual adjust http://www.bristolwatch.com/arduino/arduino_ds1307.htm byte SW0 = A0; byte SW1 = A1; byte SW2 = A2; // use for hexa in zecimal conversion int zh, uh, ore; int zm, um, miniti; void setup() { // Serial.begin(57600); Wire.begin(); RTC.begin(); // RTC.adjust(DateTime(__DATE__, __TIME__)); // if you need set clock... just remove // from line above this // part code for flashing LED Wire.beginTransmission(0x68); Wire.write(0x07); // move pointer to SQW address // Wire.write(0x00); // turns the SQW pin off Wire.write(0x10); // sends 0x10 (hex) 00010000 (binary) to control register - turns on square wave at 1Hz // Wire.write(0x13); // sends 0x13 (hex) 00010011 (binary) 32kHz Wire.endTransmission(); if (! RTC.isrunning()) { Serial.println("RTC is NOT running!"); // following line sets the RTC to the date & time this sketch was compiled RTC.adjust(DateTime(__DATE__, __TIME__)); } // dht.begin(); pinMode(segA, OUTPUT); pinMode(segB, OUTPUT); pinMode(segC, OUTPUT); pinMode(segD, OUTPUT); pinMode(segE, OUTPUT); pinMode(segF, OUTPUT); pinMode(segG, OUTPUT); pinMode(segDP, OUTPUT); pinMode(digit1, OUTPUT); pinMode(digit2, OUTPUT); pinMode(digit3, OUTPUT); pinMode(digit4, OUTPUT); // pinMode(13, OUTPUT); Serial.begin(9600); Serial.println("test for niq_ro"); pinMode(SW0, INPUT); // for this use a slide switch pinMode(SW1, INPUT); // N.O. push button switch pinMode(SW2, INPUT); // N.O. push button switch digitalWrite(SW0, HIGH); // pull-ups on digitalWrite(SW1, HIGH); digitalWrite(SW2, HIGH); } void loop() { digitalWrite(segDP, HIGH); DateTime now = RTC.now(); int timp = now.hour()*100+now.minute(); // int timp = (now.minute(), DEC); // displayNumber(12); // this is number to diplay // int timp = 1234; Serial.print(now.hour(), DEC); Serial.print(":"); Serial.print(now.minute(), DEC); Serial.print(" -> "); Serial.print(timp); Serial.println(" !"); // display parts for(int i = 250 ; i >0 ; i--) { if (timp >= 1000) displayNumber01(timp); else displayNumber02(timp); } for(int i = 250 ; i >0 ; i--) { if (timp >= 1000) displayNumber03(timp); else displayNumber04(timp); } if (!(digitalRead(SW0))) set_time(); // hold the switch to set time } void set_time() { byte minutes1 = 0; byte hours1 = 0; byte minutes = 0; byte hours = 0; while (!digitalRead(SW0)) // set time switch must be released to exit { minutes1=minutes; hours1=hours; while (!digitalRead(SW1)) // set minutes { minutes++; // converting hexa in zecimal: zh = hours / 16; uh = hours - 16 * zh ; ore = 10 * zh + uh; zm = minutes / 16; um = minutes - 16 * zm ; miniti = 10 * zm + um; for(int i = 20 ; i >0 ; i--) { displayNumber01(ore*100+miniti); } if ((minutes & 0x0f) > 9) minutes = minutes + 6; if (minutes > 0x59) minutes = 0; Serial.print("Minutes = "); if (minutes >= 9) Serial.print("0"); Serial.println(minutes, HEX); delay(150); } while (!digitalRead(SW2)) // set hours { hours++; // converting hexa in zecimal: zh = hours / 16; uh = hours - 16 * zh ; ore = 10 * zh + uh; zm = minutes / 16; um = minutes - 16 * zm ; miniti = 10 * zm + um; for(int i = 20 ; i >0 ; i--) { displayNumber01(ore*100+miniti); } if ((hours & 0x0f) > 9) hours = hours + 6; if (hours > 0x23) hours = 0; Serial.print("Hours = "); if (hours <= 9) Serial.print("0"); Serial.println(hours, HEX); delay(150); } Wire.beginTransmission(0x68); // activate DS1307 Wire.write(0); // where to begin Wire.write(0x00); //seconds Wire.write(minutes); //minutes Wire.write(0x80 | hours); //hours (24hr time) Wire.write(0x06); // Day 01-07 Wire.write(0x01); // Date 0-31 Wire.write(0x05); // month 0-12 Wire.write(0x09); // Year 00-99 Wire.write(0x10); // Control 0x10 produces a 1 HZ square wave on pin 7. Wire.endTransmission(); // converting hexa in zecimal: zh = hours / 16; uh = hours - 16 * zh ; ore = 10 * zh + uh; zm = minutes / 16; um = minutes - 16 * zm ; miniti = 10 * zm + um; for(int i = 20 ; i >0 ; i--) { displayNumber01(ore*100+miniti); } // delay(150); } } void displayNumber01(int toDisplay) { #define DISPLAY_BRIGHTNESS 500 #define DIGIT_ON HIGH #define DIGIT_OFF LOW for(int digit = 4 ; digit > 0 ; digit--) { //Turn on a digit for a short amount of time switch(digit) { case 1: digitalWrite(digit1, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 2: digitalWrite(digit2, DIGIT_ON); digitalWrite(segDP, LOW); break; case 3: digitalWrite(digit3, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 4: digitalWrite(digit4, DIGIT_ON); digitalWrite(segDP, HIGH); break; } lightNumber(toDisplay % 10); toDisplay /= 10; delayMicroseconds(DISPLAY_BRIGHTNESS); //Turn off all segments lightNumber(10); //Turn off all digits digitalWrite(digit1, DIGIT_OFF); digitalWrite(digit2, DIGIT_OFF); digitalWrite(digit3, DIGIT_OFF); digitalWrite(digit4, DIGIT_OFF); } } void displayNumber02(int toDisplay) { #define DISPLAY_BRIGHTNESS 500 #define DIGIT_ON HIGH #define DIGIT_OFF LOW for(int digit = 4 ; digit > 0 ; digit--) { //Turn on a digit for a short amount of time switch(digit) { case 1: lightNumber(10); digitalWrite(segDP, HIGH); break; case 2: digitalWrite(digit2, DIGIT_ON); digitalWrite(segDP, LOW); break; case 3: digitalWrite(digit3, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 4: digitalWrite(digit4, DIGIT_ON); digitalWrite(segDP, HIGH); break; } lightNumber(toDisplay % 10); toDisplay /= 10; delayMicroseconds(DISPLAY_BRIGHTNESS); //Turn off all segments lightNumber(10); //Turn off all digits digitalWrite(digit1, DIGIT_OFF); digitalWrite(digit2, DIGIT_OFF); digitalWrite(digit3, DIGIT_OFF); digitalWrite(digit4, DIGIT_OFF); } } void displayNumber03(int toDisplay) { #define DISPLAY_BRIGHTNESS 500 #define DIGIT_ON HIGH #define DIGIT_OFF LOW for(int digit = 4 ; digit > 0 ; digit--) { //Turn on a digit for a short amount of time switch(digit) { case 1: digitalWrite(digit1, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 2: digitalWrite(digit2, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 3: digitalWrite(digit3, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 4: digitalWrite(digit4, DIGIT_ON); digitalWrite(segDP, HIGH); break; } lightNumber(toDisplay % 10); toDisplay /= 10; delayMicroseconds(DISPLAY_BRIGHTNESS); //Turn off all segments lightNumber(10); //Turn off all digits digitalWrite(digit1, DIGIT_OFF); digitalWrite(digit2, DIGIT_OFF); digitalWrite(digit3, DIGIT_OFF); digitalWrite(digit4, DIGIT_OFF); } } void displayNumber04(int toDisplay) { #define DISPLAY_BRIGHTNESS 500 #define DIGIT_ON HIGH #define DIGIT_OFF LOW for(int digit = 4 ; digit > 0 ; digit--) { //Turn on a digit for a short amount of time switch(digit) { case 1: lightNumber(10); digitalWrite(segDP, HIGH); break; case 2: digitalWrite(digit2, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 3: digitalWrite(digit3, DIGIT_ON); digitalWrite(segDP, HIGH); break; case 4: digitalWrite(digit4, DIGIT_ON); digitalWrite(segDP, HIGH); break; } lightNumber(toDisplay % 10); toDisplay /= 10; delayMicroseconds(DISPLAY_BRIGHTNESS); //Turn off all segments lightNumber(10); //Turn off all digits digitalWrite(digit1, DIGIT_OFF); digitalWrite(digit2, DIGIT_OFF); digitalWrite(digit3, DIGIT_OFF); digitalWrite(digit4, DIGIT_OFF); } } //Given a number, turns on those segments //If number == 10, then turn off number void lightNumber(int numberToDisplay) { #define SEGMENT_ON LOW #define SEGMENT_OFF HIGH switch (numberToDisplay){ case 0: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_ON); digitalWrite(segE, SEGMENT_ON); digitalWrite(segF, SEGMENT_ON); digitalWrite(segG, SEGMENT_OFF); break; case 1: digitalWrite(segA, SEGMENT_OFF); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_OFF); digitalWrite(segE, SEGMENT_OFF); digitalWrite(segF, SEGMENT_OFF); digitalWrite(segG, SEGMENT_OFF); break; case 2: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_OFF); digitalWrite(segD, SEGMENT_ON); digitalWrite(segE, SEGMENT_ON); digitalWrite(segF, SEGMENT_OFF); digitalWrite(segG, SEGMENT_ON); break; case 3: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_ON); digitalWrite(segE, SEGMENT_OFF); digitalWrite(segF, SEGMENT_OFF); digitalWrite(segG, SEGMENT_ON); break; case 4: digitalWrite(segA, SEGMENT_OFF); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_OFF); digitalWrite(segE, SEGMENT_OFF); digitalWrite(segF, SEGMENT_ON); digitalWrite(segG, SEGMENT_ON); break; case 5: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_OFF); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_ON); digitalWrite(segE, SEGMENT_OFF); digitalWrite(segF, SEGMENT_ON); digitalWrite(segG, SEGMENT_ON); break; case 6: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_OFF); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_ON); digitalWrite(segE, SEGMENT_ON); digitalWrite(segF, SEGMENT_ON); digitalWrite(segG, SEGMENT_ON); break; case 7: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_OFF); digitalWrite(segE, SEGMENT_OFF); digitalWrite(segF, SEGMENT_OFF); digitalWrite(segG, SEGMENT_OFF); break; case 8: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_ON); digitalWrite(segE, SEGMENT_ON); digitalWrite(segF, SEGMENT_ON); digitalWrite(segG, SEGMENT_ON); break; case 9: digitalWrite(segA, SEGMENT_ON); digitalWrite(segB, SEGMENT_ON); digitalWrite(segC, SEGMENT_ON); digitalWrite(segD, SEGMENT_ON); digitalWrite(segE, SEGMENT_OFF); digitalWrite(segF, SEGMENT_ON); digitalWrite(segG, SEGMENT_ON); break; // all segment are ON case 10: digitalWrite(segA, SEGMENT_OFF); digitalWrite(segB, SEGMENT_OFF); digitalWrite(segC, SEGMENT_OFF); digitalWrite(segD, SEGMENT_OFF); digitalWrite(segE, SEGMENT_OFF); digitalWrite(segF, SEGMENT_OFF); digitalWrite(segG, SEGMENT_OFF); break; } } I made a litle movie named manual adjust for RTC clock with Arduino and 7-segment LED display Note: Original article in roumanian language is Afisaje LED cu 7 segmente si.. Arduino (IV)!!! 11.10.2016 I correct sketch for display 10:00 case.. 07.02.2017 Now, I pun on my Github channel sketch for cathode comon display, see github.com/tehniq3/multiplexedclock
