Bastle Dir Dein eigenes kleines U-Boot und geh mit ihm auf Tauchgang! Du benötigst nicht viel Material und schon bist Du der König der Meere!

Here are some images of Revell's 1/72 scale TYP VII C U Boot. I decided to build my U Boat with a nice rusty appearance. I think it gives it a meaner look. I believe this kit to be a more recent release in the past couple of years or so (correct me if I'm wrong). So why then with todays technology did they design a kit with raised panel lines. Dear Revell, Stop it already!! Other then that this is a big nicely detailed kit and went together without any problems. Although the Amati 1/72 scale TYP VII U boat is most likely the better kit and 3 times the price, that's even if you can find one. At $100 Cdn the Revell kit makes a great economical alternative. From Wikipedia" Type VII U-boats were the most common type of German World War II U-boat. The Type VII was based on earlier German submarine designs going back to the World War I Type UB III, designed through the Dutch dummy company Ingenieurskantoor voor Scheepsbouw den Haag (I.v.S) (set up by Germany after World War I in order to maintain and develop German submarine technology and to circumvent the limitations set by the Treaty of Versailles) and built by shipyards around the world. The Finnish Vetehinen class and Spanish Type E-1 also provided some of the basis for the Type VII design. These designs led to the Type VII along with Type I, the latter being built in AG Weser shipyard in Bremen, Germany. The production of Type I was cut down only after two boats; the reasons for this are not certain and range from political decisions to faults of the type. The design of the Type I was further used in the development of the Type VII and Type IX. Type VII submarines were the most widely used U-boats of the war and were the most produced submarine class in history, with 709 built. The type had several modifications. The Type VIIC was the workhorse of the German U-boat force, with 568 commissioned from 1940 to 1945. Boats of this type were built throughout the war. The first VIIC boat commissioned was the U-69 in 1940. The Type VIIC was an effective fighting machine and was seen almost everywhere U-boats operated, although their range was not as great as that of the larger Type IX. The VIIC came into service as the first "Happy Time" near the beginning of World War II was almost over, and it was this boat that saw the final defeat by the Allied anti-submarine campaign in late 1943 and 1944. Type VIIC was a slightly modified version of the successful VIIB. They had very similar engines and power, and were larger and heavier which made them slightly slower than the VIIB. Many of these boats were fitted with snorkels in 1944 and 1945. On the surface the boats were propelled by two supercharged Germaniawerft, 6 cylinder, 4-stroke M6V 40/46 diesels totaling 2,800 to 3,200 hp (2,100 to 2,400 kW) at 470 to 490 rpm. For submerged propulsion, several different electric motors were used. Early models used the VIIB configuration of two AEG GU 460/8-276 electric motors, totaling 750 hp (560 kW) with a max rpm of 296, while newer boats used two BBC (Brown Boveri & Co) GG UB 720/8, two GL (Garbe Lahmeyer) RP 137/c electric motors or two SSW (Siemens-Schuckert-Werke) GU 343/38-8 electric motors with the same power output as the AEG motors.

... Fairey Gannet A.S.4 im Luftwaffenmuseum Berlin-Gatow, Deutschland, Germany. Other view: www.flickr.com/photos/67855182@N00/575813572/

Zeichnung des Molch mit Übungstorpedo

Explore M.Cara's 671 photos on Flickr!

Den U-Boot-Ausschnitt vom Schnittmuster Shirt Liv kann man verschieden nähen, z.B. als amerikanischen Ausschnitt

Here are some images of Revell's (ICM molds) 1/144 scale U Boat Type IIB submarine U-23. From Wikipedia" The Type II U-boat was designed by Germany as a coastal U-boat, modeled after the CV-707 submarine, which was designed by the Dutch dummy company NV Ingenieurskantoor voor Scheepsbouw den Haag (I.v.S) (set up by Germany after World War I in order to maintain and develop German submarine technology and to circumvent the limitations set by the Treaty of Versailles) and built in 1933 by the Finnish Crichton-Vulcan shipyard in Turku, Finland. It was too small to undertake sustained operations far away from the home support facilities. Its primary role was found to be in the training schools, preparing new German naval officers for command. It appeared in four sub-types. Germany was stripped of her U-boats by the Treaty of Versailles at the end of World War I, but in the late 1920s and early 1930s began to rebuild her armed forces. The pace of rearmament accelerated under Adolf Hitler, and the first Type II U-boat was laid down on 11 February 1935. Knowing that the world would see this step towards rearmament, Hitler reached an agreement with Britain to build a navy up to 35% of the size of the Royal Navy in surface vessels, but equal to the British in number of submarines. This agreement was signed on 18 June 1935, and U-1 was commissioned 11 days later. The defining characteristic of the Type II was its tiny size. Known as the Einbaum ("dugout canoe"), it had the advantages over larger boats of the ability to work in shallow water, diving more quickly, and being more difficult to spot due to the low conning tower. However, it had a shallower maximum depth, short range, and cramped living conditions, and could carry few torpedoes. The boat had a single hull, with no watertight compartments. There were three torpedo tubes forward (none aft), with space for another two torpedoes inside the pressure hull for reloads. A single 20 mm anti-aircraft gun was provided, but no deck gun was mounted. Space inside was limited. The two spare torpedoes extended from just behind the torpedo tubes to just in front of the control room, and most of the 24-man crew lived in this forward area around the torpedoes, sharing 12 bunks. Four bunks were also provided aft of the engines for the engine room crew. Cooking and sanitary facilities were basic, and in this environment long patrols were very arduous. Most Type IIs only saw operational service during the early years of the war, thereafter remaining in training bases. Six were stripped down to just a hull, transported by river and truck to Linz (on the Danube), and reassembled for use in the Black Sea against the Soviet Union. In contrast to other German submarine types, few Type IIs were lost. This, of course, reflects their use as training boats, although accidents accounted for several vessels. These boats were a first step towards re-armament, intended to provide Germany with experience in submarine construction and operation and lay the foundation for larger boats to build upon. Only one of these submarines survives to this day; the prototype CV-707, renamed Vesikko by the Finnish Navy which later bought it. On February 3, 2008, The Telegraph reported that U-20 had been discovered by Selçuk Kolay, a Turkish marine engineer in 80 feet (24 m) of water off the coast of the Turkish city of Zonguldak.  The paper also reported that Kolay knows where U-23 and U-19 are, scuttled in deeper water near U-20.  Deutsche Werke AG, of Kiel, built four Type IIBs in 1935 and 1936, Germaniawerft AG, of Kiel, built fourteen in 1935 and 1936, and Flender Werke AG, of Lübeck, built two between 1938 and 1940, for a total of twenty built.  German submarine U-23 was a Type IIB U-boat of the Nazi German Kriegsmarine, built in Germaniawerft, Kiel. She was laid down on 11 April 1936 and commissioned on 24 September. At 4:45 am on 4 October 1939, U-23 scored one of the Kriegsmarine's early successes of the war when she torpedoed and sank with gunfire, the merchant ship Glen Farg about 60 mi (97 km) south-southwest of Sumburgh Head (southern Shetland). One person died, while 16 survivors were picked up by HMS Firedrake and landed at Kirkwall the next day. In 16 patrols U-23 sank seven ships for a total of 11,179 gross register tons (GRT) including two warships, as well as damaging a warship and an auxiliary warship. Over the course of her service with the Kriegsmarine, U-23 had ten commanding officers, the most famous of whom was Kapitänleutnant Otto Kretschmer, who went on to become the top scoring U-boat ace. After service in the Atlantic with the 1st U-boat Flotilla, U-23 served as a training boat with the 21st U-boat Flotilla from July 1940 until September 1942. U-23 was then refitted and transported overland to the Black Sea port of Konstanza, Romania, with the 30th U-boat Flotilla until September 1944. U-23 was scuttled by her crew on 10 September 1944, off the coast of Turkey in the Black Sea at position 41°11′N 30°00′ECoordinates: to prevent her capture by the advancing Soviets. On 3 February 2008, The Daily Telegraph newspaper reported that U-23 had been discovered by Selçuk Kolay, a Turkish marine engineer, in 160 ft (49 m) of water, three miles from the town of Agva

Here are some more images of Revell's 1/144 scale type 212 A U Boat. What can I say but this model was fun to build. Not much to it but a nice result in the end. From Wikipedia" The German Type 212 class, also Italian Todaro class, is a highly advanced design of non-nuclear submarine (U-boat) developed by Howaldtswerke-Deutsche Werft AG (HDW) and Fincantieri S.p.a. for the German and Italian Navy. It features diesel propulsion and an additional air-independent propulsion (AIP) system using Siemens proton exchange membrane (PEM) hydrogen fuel cells. The submarine can operate at high speed on diesel power or switch to the AIP system for silent slow cruising, staying submerged for up to three weeks without surfacing and with no exhaust heat. The system is also said to be vibration-free, extremely quiet and virtually undetectable. Type 212 is the first of the only two fuel cell propulsion system equipped submarines ready for series production by 2007, the other being the Project 677 Lada class submarine designed by Russian Rubin Design Bureau. At the beginning of the 1990s the German Navy was seeking a replacement for the Type 206 submarines. Initial study started on a Type 209 improved design, with AIP capability, called Type 212. The final programme started in 1994 as the two navies of Germany and Italy began working together to design a new conventional submarine, respectively to operate in the shallow and confined waters of the Baltic sea and in the deeper waters of the Mediterranean sea. The two different requirements were mixed into a common one and, because of significant updates to the design, the designation was changed to Type 212A since then. In 1996 a Memorandum of Understanding (MOU) gave the start to the cooperation. Its main aim was the construction of identical boats and the start of a collaboration in logistic and life-cycle support for the two navies. The German government placed an initial order of four Type 212A submarines in 1998. The German Submarine Consortium built them at the shipyards of HDW and Thyssen Nordseewerke GmbH (TNSW) of Emden. Different sections of the submarines were constructed at both sites at the same time and then half of them were shipped to the respective other yard so that both HDW and Thyssen Nordseewerke assembled two complete submarines each. In the same year the Italian government placed an order of two U212A submarines built by Fincantieri for the Marina Militare (Italian Navy) at Muggiano shipyard, designated as the Todaro class. The German Navy ordered two additional, improved submarines in 2006, to be delivered from 2012 on. They will be 1.2 meters longer to give additional space for a new reconnaissance mast. On 21 April 2008 the Italian Navy ordered a second batch of submarine in the same configuration of the original ones. Some upgrading should involve materials and components of commercial derivation, as well as the software package of the CMS. The intention is to keep the same configuration of the first series and reduce maintenance costs. The export-oriented Type 214 submarine succeeds the Type 209 submarine and shares certain features with the Type 212A, such as the AIP fuel cell propulsion. Partly owing to the "X" arrangement of the stern planes, the Type 212 is capable of operating in as little as 17 metres of water, allowing it to come much closer to shore than most contemporary submarines. This gives it an advantage in covert operations, as SCUBA-equipped commandos operating from the boat can surface close to the beach and execute their mission more quickly and with less effort. A notable design feature is the prismatic hull cross-section and smoothly faired transitions from the hull to the sail, improving the boat's stealth characteristics. The ship and internal fixtures are constructed of nonmagnetic materials, significantly reducing the chances of it being detected by magnetometers or setting off magnetic naval mines. The low emission profile allowed the submarines in exercises to intrude even into well protected opposing forces such as carrier formations with their screen. Although hydrogen–oxygen propulsion had been considered for submarines as early as World War I, the concept was not very successful until recently due to fire and explosion concerns. In the Type 212 this has been countered by storing the fuel and oxidizer in tanks outside the crew space, between the pressure hull and outer light hull. The gases are piped through the pressure hull to the fuel cells as needed to generate electricity, but at any given time there is only a very small amount of gas present in the crew space. Currently, the Type 212A is capable of launching the fiber optic-guided DM2A4 Seehecht ("Seahake") heavyweight torpedoes, the WASS A184 Mod.3 torpedoes, the WASS BlackShark torpedoes and short-range missiles from its six torpedo tubes, which use a water ram expulsion system. Future capability may include tube-launched cruise missiles. The short-range missile IDAS (based on the IRIS-T missile), primarily intended for use against air threats as well as small or medium-sized sea- or near land targets, is currently being developed by Diehl BGT Defence to be fired from Type 212's torpedo tubes. IDAS is fiber-optic guided and has a range of approx. 20 km. Four missiles fit in one torpedo tube, stored in a magazine. First deliveries of IDAS for the German Navy are scheduled from 2014 on. A 30 mm auto-cannon called Muräne (moray) to support diver operations or to give warning shots is being considered too. The cannon, probably a version of the RMK30 built by Rheinmetall, will be stored in a retractable mast and can be fired without the boat emerging. The mast will also be designed to contain three Aladin UAVs for reconnaissance missions. This mast is likely to be mounted on the 2nd batch of Type 212 submarines for the German Navy.

heine U-Boot-Pullover bequem online shoppen ➽ Jetzt günstig bestellen bei heine.

Es könnte DAS neue Spielzeug für Milliardäre werden – die M5-165, eine Superjacht, die sich auch unter Wasser fortbewegen kann. Video-Einblick in das Lux...

Le site de référence de la bande dessinée - Logiciel de gestion de collection BD, Forum, Chroniques, Preview, News, Dossiers, Jeux, Concours, Festivals.

U-Boot-Bunker in Hamburg

U-Boot U9 (Schreiber-Bogen) из бумаги/картона скачать бесплатно. Сборная бумажная масштабная модель для склеивания своими руками. Фото, шаблоны (развертки, выкройки) и схемы (инструкции) для сборки картонного макета U-Boot U9 (Schreiber-Bogen). Papercraft, scale paper model free download template.

Type IIB U-18 Rough seas, not unusual in the Black Sea. Well bundled up, the bridge watch and captain Oblt.z.5. Fleige scan the horizon. Note the empty...