Arknights • Surtr

Arknights

Maid

Artist:Asa_034 Web:pixiv

Artist:Asa_034 Web:pixiv

Illustration from my book "Norse Gods" (Nordiska gudar)

Surtr's default skin

In the heart of the fiery realm of Muspelheim stands Surtr, a formidable and colossal being of unparalleled power. Towering at an immense height, his fiery

#anime #animeicon #Arknights #Surtr

This model is NOT an easy-to-print model. Please ensure you have enough sanity to craft it as it comes in 35 pieces that fit a printer with a platform size of 200mm x 200mm x 200mm. Some of the pieces come with hanging parts where support is needed. There is a picture with parts and pieces labeled to their file names in the preview section which you can refer to. I also include the uncut version in case you need it. There are tunnels with a diameter of 10mm punch on the model for alignment and bone installation purposes. You can use an iron or wooden rod with a similar diameter for these purposes. I also include the "peg" file, a cylinder with a diameter of 9.5mm just in case you need it. There are cut out on part 3 and Acc for the thrust. Please make sure the support is removed thoroughly so that the thrust can fit the cavity properly. You will need 4 copies of the thrust to complete the prop Learning from the feedback given on the previous Claymore build the blade is too thin and it is quite flimsy after they are combined. Therefore, I increase the number of tunnels and thickness in order to minimize these flaws. For scaling, please use the same scale factor for all the parts and pieces. Cheers and Happy Printing!