Ahhhh Frankenstein. Does anything represent monsters and Halloween better? Interesting fact. Did you know that the monster created by Victor Frankenstein in Shelley's novel was nameless? Over the years, the monster has been called Frankenstein. This Frankenstein inspired soap is easy to make using a cardboard raking/sculpting tool. It is perfect for Halloween lovers who are
This tutorial will help you make your own gentle soap at home and provides soap making resources for newbies to DIY cold process soap. CP soap making help with a basic recipe.
Wake your skin up with this invigorating Espresso Soap! Additives including coffee butter, caffeine extract and real coffee will surely liven up your morning routine. Coffee grounds provide gentle exfoliation and the Espresso Fragrance will remind you of your favorite rich, roasted coffee!
Lately I've been experimenting with making slightly translucent CP soap, and I decided to create a soap that would look like agate. Apricot Agates are banded agates that are mostly mined in Botswana, Africa, that's why they are usually called 'Botswana Agates'. They look like this: (source: pinterest) To make the soap, I did a faux funnel pour in 1 spot in the mold, using squeeze bottles. Here is what it looked like: After all the soap batter was poured, I spun the mold clockwise. You can learn more about the spinning swirl technique by watching this video. I forgot to take a picture right away (oops!) and took it only after covering the mold with plastic wrap: And here are my cold-process soap gemstones! I spritzed them with alcohol for a shiny finish. After that I prepared another batch of soap called Malachite. I poured the soap batter differently but also used the spinning swirl technique. Here is how the soap looked in the mold after being spun: After being cut: I hope you enjoyed looking at my new gemstone soaps. :)
This Rubber Ducky Soaps are made by placing rubber ducky toys on each bar. They are perfect for bath time fun!
Sweet Orange Chili Pepper by Natures Garden makes one fabulous hot soap. Gorgeously colored with red and orange flame swirls, this soap smells amazing too.
This soap recipe contains Himalayan pink sea salt to create a soft and creamy lather. It's scented with a blend of lemongrass and eucalyptus essential oils.
This soap was designed to be reminiscent of a pineapple and has vibrant green and yellow colors with a patterned top. The Pineapple Fragrance is a splash of tropical heaven that will take you straight to the islands!
It has taken me quite some time to figure out and be able to recreate a rimmed soap design - both in cold process and a combination of melt and pour and cold process. Now that I feel confident in being able to recreate this in a variety of designs with consistent results, I will share how I put this together. For cold process soap, it takes two days to complete. Day 1 to create the rim and allow it to set to be firm enough yet still flexible to manipulate. Day 2 to create the inner core soap. Depending on your formulation, you may be able to do this in a shorter amount of time, but I find the 2 day process works for me. Melt and pour/cold process can be done in 1 day as it takes only an hour or so for the melt and pour rim to set up. Please note that are at least two ways to create rimmed soaps. The way shown here and to make a thick slab of soap and then shear off a thin layer to use to formulate the rim. You need a custom wire soap cutter to shear the slab into the thin slices. This is a great method for high volume production but does not allow as much creativity in surface design (like the flowers.) This is an advanced technique so it is assumed that you have formulations that you are comfortable with based on the design you may want to use (slow moving for example.) It is also assumed that one knows how to calculate amount of soap needed for the end result and the size of your molds which will be unique to each individual. Since these are soaps that I do sell, I do not provide the formula I used. If you want to do a complex design, use a slow moving formula. Things to keep in mind - hints for my success: - I do not add fragrance to the outer rim - I keep it as simple as possible to avoid issues that fragrances can bring to the soap. You are working with a thin layer so control is important. - The rim soap needs to gel completely. If not, it will crack when you try to manipulate it. - I use a variety of formulations but they mostly are 45% hard oils/butters and 55% soft oils. - I have removed the slab and cut and rolled anywhere from 12 - 24 hours after pouring. The soap is not warm but room temperature. No heat is used to roll and place the rim into the PVC. - Rim thickness. I find that 4 - 5mm is a good thickness - not too thin that it will crack, not to thick that the outside will stretch too much as you roll it (and create small stretch cracks). This is personal choice, your results and issues may vary. - I use the same or almost the same formulation for the rim and the inner core soap. - I soap these at approximately 110 degrees F. - I use 3" PVC pipe cut to 6 1/2" to 7" lengths. This size works for me because I have short fingers and need to be able to reach into the pipe to manipulate the rim to align the seams for a tight fit. - Measurements are important if you do not want to waste soap (and who wants to waste good soap.) Decide on the height of your mold first, then determine the size slab you need to make and find or make a mold to accommodate your size so that you do not have to do too much trimming to fit the mold. I use a wooden breakaway slab mold that is just over 14" by 10" lined with freezer paper. For this size mold to get 4 to 5mm thick slab I use 15 ounces oils and allows me to fit 2 PVC molds. Slab mold lined with freezer paper So - lets go......... 1. Mix up your rimmed soap batter and separate out into your colors of choice. For this design I am using pink, dark pink (almost red) and green micas along with my ivory uncolored base. I am also going to accent with some gold mica mixed with oil for the final surface design. I am scenting the inner core soap with a combination of 2 of my absolute favorite fragrances that I know do not discolor or accelerate trace and hold well in cold process soap. Champagne and Crisp Apple Rose - both from Brambleberry. The colors were chosen to match the fragrance combination 2. Pour this soap into the mold in the manner you prefer to create your outer rim design. You may have to lift the mold and maneuver it by tipping it slightly in various directions so that the thin layer of soap spreads evenly to all areas of the mold. Just poured soap After manipulating the soap with a thin dowel rod to create the waves of color. The gold mica was added after the swirls were completed. 3. Allow this soap to gel. To insure a full gel on this layer I use the oven set to 170 degrees F. If doing this, make sure your mold is oven safe. Set the oven to 170, then once you place the soap (I cover the mold too) into the oven, turn it off and let it sit for a day to gel and then cool slowly. If your soap is not gelling by turning off the oven, keep it on for 5 - 10 minutes or so. Do not cook the soap as it will wrinkle on the surface. The time and temp can vary and you will need to figure out what works best for you based on the size of your slab, the thickness and your oven. You can also try to use a heating pad under your mold to force gel. The fully gelled slab 4. Carefully remove the slab from the mold and peel away the freezer paper. This is where the breakaway slab is really handy as it makes it very easy to remove the soap from the mold as you take the mold apart by removing the sides - the slab just slides off the bottom base. This is the slab mold that I use: Collapsable Slab Mold 5. Trim the slab to fit your PVC pipe mold. These measurements will be based on the height, inner diameter of the mold and the thickness of your slab. I trim mine to 6.5" or 7" x 9 3/8". Too short and the seam will not meet, too large and it will overlap too much. The thicker the slab, the shorter the width you will need. You want the ends to overlap slightly so that when you press the soap into the molds to align the seam, it is a tight fit. My slab size allows me to form two rims that fit my PVC molds. 6. This is the PVC pipe I use with the flat bottom end cap. It creates a pretty good seal so that the soap does not leak out the bottom. Thin walled charlotte drain pipe purchased at Lowes Home Improvement in the United States. End caps too. This pipe comes in 10' sections that are cut to size. 7. Now that your slab is trimmed to fit your mold, place it design side face down and roll it so that you can then insert it into the PVC mold. I use a rolling pin but you can also use the curvature of your PVC pipe. This makes it easier to form without breaking it. 8. Carefully slide the rim into your mold with the seems overlapped. This is where you will then need to manipulate the rim for a tight fit and press the edges so that you end up with a tight fitting seem. This takes two hands so I cannot get a picture of the inside manipulation. If you cannot align the edges due to too large an overlap, you may have to remove it and trim a bit more off the edge - be careful as trimming too much will leave a gap in your rim. I do not line the molds as the rim as already formed and will not stick to the sides of the pipe. Adding a liner, will also create an indent in the soap that will look like another seam. Slab rolled and placed into the mold and pressed from the inside to the sides to align the edges and create a tight seam. 9. Cap the end of the PVC pipe molds and create your inner core soap. For two 6.5" to 7" tall molds and a 4 - 5mm thick rim, I use 34 ounces oils for the inner soap. You can color this soap and fragrance however you like. I find a solid core and a designed rim coordinate nicely and allow the rim design to pop. You could also do the reverse and create a solid color rim and an "In the Pot Swirl" for the inner soap. Lots of possibilities. 10. Pour at light to medium trace into your molds. 11. Cover with plastic wrap and wrap in towels to allow the soap to gel (I always gel my soap, not sure how these come out not gelled.) Be careful lifting your molds - if your end cap is at all loose, it can slip off and your soap will spill out. Lift from the bottom to transport. 12. Allow to set 24 - 48 hours. The longer you keep it in the mold the easier it is to get out. It can be tricky to unmold soap in a PVC pipe though. I tend to place it in the freezer for an hour or so as it helps remove the soap from the pipe. 13. Cut your soap to your preferred size. Using melt and pour for the rim. The process is the same but you do not need to wait for the soap to gel, just to set up. I used clear SFIC base. Once set, the thin layer is quite pliable and easy to form into the mold. Below are two soaps using melt and pour as the rim and cold process for the inner soap. Because cold process can and will shrink as the water evaporates out, I did a large water discount (1:1.5 lye to water ratio) to create the cold process to reduce shrinking. Not sure how these will hold up after a full 6 week or longer cure but we shall see. Dark blue has iridescent glitter to add some sparkle and scented with Sparkling Snowflake from Wholesale Supplies Plus. The teal blue has poppy seeds to add interest in the rim and is scented with Shave and a Haircut from Brambleberry. Even though these soaps have a glycerin melt and pour rim, I was still able to slice them with my wire soap cutter (typically you cannot slice melt and pour with a wire cutter) Collection of finished rimmed soaps. The melt and pour are on the bottom right. ~ Faith Alaiyna B. Bath and Body
This ends my summer tropical vacation series soap. If you have not seen the previous 2 soap creation inspired by tropical cocktail drinks...
You have done your soapy homework: the recipe is created and prepared, the design is fully thought out, and time has been scheduled in your busy day. Now, it’s time to prep your ingredients and set up the soaping work space. Having your supplies and space fully prepared before making cold process soap is extremely …
This turned out to be one of my favorite soaps! I love the color scheme and the contrast between the ball embeds and the light pink soap base. The gold mica gives the embeds a ring of gold. I scented this using Champagne fragrance oil from Bramble Berry.
This adorable snowman CP soap is the perfect addition to your holiday product line. Or, make these for family and friends as a special holiday treat. Pair this with a cute holiday soap dish and you have the perfect hostess gift, teacher gift, etc. The oils in this soap give it an extra creamy lather.
As promised (on Facebook; what, you’re not reading our Facebook fan page obsessively? Shame. Shame), my Hot Cocoa Soap recipe in all of its chocolaty goodness! I used an advanced technique called ‘In the Pot Swirl’. Basically, you split up your batch into two different colors and pour 1 color into the second pot in various places. The …
This ocean-inspired design is easier to create than you think.
This tutorial will help you make your own gentle soap at home and provides soap making resources for newbies to DIY cold process soap. CP soap making help with a basic recipe.
This really isn’t a hard soap to make. It just takes two days to do. I love embeds. I have a patience for them that not everyone does. I plan out my soaps in advance and then make the …
I’ll admit it: soaps don’t always turn out how I plan. It might be that the colors don’t look right together, or the scent is too weak or too strong (or just unpleasant). Embeddin…
Chocolate Almond Soap Recipe
I'm going to start a new category on my blog. It is going to be short tips and tricks. Nothing fancy...but very usefull. So for tip number one... I mention this in the lavender clouds post. This is a great tip for cutting soap with lines of mica, cocoa or oxides in them. Look
This simple recipe, mold and packaging combo makes for the perfect amenity soaps. Great to market to hotels, inns and B&Bs because there are two soaps in one package; one for the sink and one for the shower! Energy Fragrance Oil is an awakening and bright blend of ruby red grapefruit, orange zest and pineapple. Combined with gently exfoliating jojoba beads, this soap will be the perfect morning wakeup.
The warm caramel colors are beautifully swirled in this Cold Process soap. The coconut milk adds moisturizing benefits to help soften the skin.
This soap is like comfort food in soap form. The warm colors make you think of fall and pumpkin pie while the scent is comforting and will make you yearn for that once-a-year drink from you know where!11/2019: Pumpkin Mocha Latte Fragrance Oil 874 has been discontinued. This will need to be replaced with a fragrance previously tested to work in CP.
A delightful fall blend of crisp apple, cinnamon and clove that will leave your skin moisturized with its creamy lather.
Welcome to October's 2017 SMF Soap Challenge! Please read first ***Before signing up, please give me a moment to post examples of soaps in...
Creating swirly mica tops on your soaps looks a lot harder than it is, and the result is simply stunning! The surface of the soap is usually a just as important as the soap itself, and learning a t…
Have you ever wished that you could add a custom design to your cold process soaps, but don’t think you’re “artistic” enough? There’s a technique that makes it easy to…
This soap is made with and inspired by Lime LaCroix.
The best soap recipe ever is the holy grail of soapmaking, and if you are on the hunt for it, I've got the secret to formulating the perfect soap recipe.
Estas fotos pertenecen a los talleres realizados en Barcelona, 7 y 8 de Septiembre, en los que participaron: Roser Giménez, Virginia de Pedro, Mireia Salgado, Inma Salla, Nuri Escolá, Isabel de Arquer, Xavi Miranda, Ana Leo, Assumpta García, Montse Vivas, Dolors Eritja, Concep San Juan, Antonia Carrasco, Rosana Alvaro y Marta Velasco Muchas gracias a tod@s los participantes por vuestra asistencia ¡Hasta pronto!
Als ich vor Kurzem auf Lidiyas Blog eine sechseckige Seife entdeckt habe, war eine klar: So eine will ich auch!
This is what inspired me: I made Mulberry Frost Soap: A bit boring at the top?! Agree, inside is so much better! This...
Make your soap mixture as usual using all safety precautions when working with lye. (Don't know how? Visit our Cold Process Tutorial.) You want your mixture to be at a thick trace, around the thickness of warm pudding. Pour the
The wonderful aroma of raspberry adds to the beauty of this swirled soap. This simple in-the-pot swirl technique creates a beautiful and luxurious bar of soap!
This Exfoliating Green Tea Bars are made with real green tea and green tea extract.
Summer is the time when flowers and vegetables are growing and we need to pull the weeds that just keep growing and growing! Whether you have a huge garden or just a few herbs growing on your balcony, this mild exfoliating and fresh, minty soap will be your friend! Extra-fine pumice will remove the dirt from your hands or give you an overall scrub in the shower, leaving you smelling fresh and ready to kick off the day!
This soap was made using the Mantra swirl technique to create this beautiful design.
After all the business of the holidays, I wanted to take a simple approach to my soaps and yet still do a bit for Valentine’s Day. So I went with some embed soaps, using four Heart tube molds and o…
