Decorative stitches are tiny pieces of thread art. Sometimes when we look at them, we can't believe a single threaded needle made such an intricate design. But even though we all love them, we often forget to use them. When you get caught up in the precise seams of a project's construction, decorative stitches can get overlooked. We wanted a way to keep some of our favorite stitches top-of-mind, so we did a little decorative stitch sampler then framed it as sewing room artwork. Super fast, super simple, and the prefect colorful reminder. Not only is a sampler a great way to remember favorite stitch patterns, you can also use it to experiment with different colors and types of thread. We selected a variety of thread types in similar colorways for each of our five featured stitches. Stitching out your designs in regular polyester thread as well as variegated, rayon, metallic, neon, and more is a great way to see the possibilities for embellishment. Experimenting with different brands of thread is also interesting. Varying the combination of stitch and thread produces quite a variety of textural effects. The size of your sampler is totally up to you. Since we wanted to frame ours, we chose a grid that would fit within a standard 11" x 17" matte board opening. We started with a solid, mid-weight cotton and pressed it nice and flat. Using a fabric pencil, we drew a starting X-Y axis. Properly stabilize the fabric per the recommendations in your machine's instruction manual. We used an iron-on, tear-away stabilizer. Using your drawn line as a starting point, pick your first thread and your first design and start stitching. We simply used the edge of our Janome Satin Stitch presser foot as our guide as we added each line of stitching. Depending on your selection of designs, you may want your lines of stitching closer together or farther apart – that is totally up to you. You could also draw in each and every line with a fabric pen or pencil, making your measurements even more precise. Change the thread and the stitch and often as you'd like as you continue your rows. For both thread and stitches, keep a list of the stitch number, stitch width and thread type. We wrote the stitch category and number on the back of the sampler, then transcribed to a paper key with thread type and width noted for each. You could frame your finished sampler as we did or simply tack it to the wall or a bulletin board nearby your machine. With all their pretty colors, these little pieces of thread art are just fun to have on hand, and maybe, when the next project comes along, all those amazing decorative stitches your sewing machine includes won't be so easily forgotten.

Having problems lining up or evenly spacing your border designs or rows of decorative stitching? Stitch building just got a whole lot easier to do! The Janome Border Guide Foot helps you to easily …

The decorative machine stitches on your sewing machine are a quick and easy way to add embellishment and decorative design to all your sewing projects. However many sewers tend to overlook using these…

Use hefty threads, yarns, braids, and ribbons in the bobbin, and sew from the wrong side to create exciting stitched effects.

Double the precision in half the time. A twin needle is basically two needles attached to a single shank. One is slightly shorter than the other so your bobbin can catch the thread from both needles. So clever that bobbin!

Adapted from a hand embroidery technique, couching is a simple way to add color and texture to a project, stitching cording to the surface of the fabric.

Heute geht es um das Kinderhospiz Wilhelmshaven und eine kostenlose Stickdatei für XXL Öffnungen und Ösenlöcher.

Ösen, die perfekt zum Projekt passen und garantiert nicht mehr herausfallen. Dieses Ösen-Set ist die Lösung für individuelle Projekte.

This month in celebration of BERNINA's 125 Years Anniversary we are focusing on how to make the most of your sewing machine with decorative stitch tips.

Ah - decorative stitching… as long as you're going straight, all is well. Then the corner approaches. If making a turn with a decorative stitch has you puzzled, we're here to help with several ways to make a turn for the better.

A blog about fibre art, photography and art journalling.

Four years after my instructor at my machine mastery class told me to do it, I stitched out all the … More

Decorative stitches are tiny pieces of thread art. Sometimes when we look at them, we can't believe a single threaded needle made such an intricate design. But even though we all love them, we often forget to use them. When you get caught up in the precise seams of a project's construction, decorative stitches can get overlooked. We wanted a way to keep some of our favorite stitches top-of-mind, so we did a little decorative stitch sampler then framed it as sewing room artwork. Super fast, super simple, and the prefect colorful reminder. Not only is a sampler a great way to remember favorite stitch patterns, you can also use it to experiment with different colors and types of thread. We selected a variety of thread types in similar colorways for each of our five featured stitches. Stitching out your designs in regular polyester thread as well as variegated, rayon, metallic, neon, and more is a great way to see the possibilities for embellishment. Experimenting with different brands of thread is also interesting. Varying the combination of stitch and thread produces quite a variety of textural effects. The size of your sampler is totally up to you. Since we wanted to frame ours, we chose a grid that would fit within a standard 11" x 17" matte board opening. We started with a solid, mid-weight cotton and pressed it nice and flat. Using a fabric pencil, we drew a starting X-Y axis. Properly stabilize the fabric per the recommendations in your machine's instruction manual. We used an iron-on, tear-away stabilizer. Using your drawn line as a starting point, pick your first thread and your first design and start stitching. We simply used the edge of our Janome Satin Stitch presser foot as our guide as we added each line of stitching. Depending on your selection of designs, you may want your lines of stitching closer together or farther apart – that is totally up to you. You could also draw in each and every line with a fabric pen or pencil, making your measurements even more precise. Change the thread and the stitch and often as you'd like as you continue your rows. For both thread and stitches, keep a list of the stitch number, stitch width and thread type. We wrote the stitch category and number on the back of the sampler, then transcribed to a paper key with thread type and width noted for each. You could frame your finished sampler as we did or simply tack it to the wall or a bulletin board nearby your machine. With all their pretty colors, these little pieces of thread art are just fun to have on hand, and maybe, when the next project comes along, all those amazing decorative stitches your sewing machine includes won't be so easily forgotten.

This page compares the different thread types available, their uses and suggestions for a successful project.

Textile Artist Paula Scaffidi shares her technique for making Summer Glow Bracelets with fabric and glow-in-the-dark cording and thread.

THE FINAL WORD: I have been neglecting to update this review, and a final word is now in order. About five months ago the machine conked out. I turned it off and when I turned it on an hour later, nothing. I took it to a very reputable technician, and his report was fatal. The motherboard on the machine was dead and Janome was not shipping replacements with no indication whether, if at all, a replacement board would become available. The best the technician could do was replace the power supply so that the machine turns on and off, and runs in a straight stitch, and only a straight stitch, with the needle plate in the zig-zag position. So I can't even get a straight stitch with the needle plate in a straight stitch position. I am still using the machine, as it runs fine in its extremely limited present mode, but the verdict is grim: the machine turned out a dud and I will not buy another Janome at this level. The machine lasted less than four years total. I now think more than ever that a mechanical machine is the only way to go, new or used. I haven't made any changes yet, but when I do, a servo-motor Juki straight stitch is definitely in the mix, along with a Singer U series zig zag, or a used Bernina or Pfaff from the 60s or similar. Or maybe a used Janome 1600P if one turns up. On the bright side, the first machine I bought, my Janome DC2012, runs as good as ever, and I also have a Janome 643D serger that I bought used and it is sailing right along after five years of regular use. So I am not totally soured on Janome machines, but I am completely turned off by the high end computerized machines and really think they are a trap. Just my current thoughts after some serious ups and downs with this machine, loving what it accomplished and mourning its collapse. ******** After six months now with the machine, I have added some updates to my review. Details are at the end of this posting, but in a word my current assessment of the machine: more of a mixed bag than I expected. Three years ago I bought my first new sewing machine – a Janome DC 2012. It seemed like a big commitment at the time, and a lot of sewing machine, more perhaps than I could use, but it is now four queen-size and two full-size and four baby quilts later and I have recently upgraded to a newer new machine. For a while I had been thinking about going bigger. (Like from the moment I walked out of the store with the first machine!) But this past spring I started seriously to research the options, and the one machine that kept coming up again and again as I surfed online was the Horizon 7700. I didn’t find a lot of reviews, but the ones I found were quite helpful, and I am adding my own early impressions, after four weeks together, in hopes it will be useful to similarly crafty folks. A bit of background: At the start of June I was trying to quilt with a 100 weight invisafil thread, and the thread kept breaking and nothing I could do was working, and I realized that it would take me months and months to finish the top at the rate I was going. Then there was the endless wrangling to get the quilt through the throat of the machine. Productive as my relationship with the DC 2012 had been, I seemed to be pushing its limits. The big quilt show was in Chicago the third weekend of June, so I decided to go and try out different machines. Not that I would buy anything, but just do some research, so that I could make a measured decision, nothing impulsive. And you all know how that ended! So about the machine itself, to start with the best: Straight line and wavy line quilting with the built in acufeed foot is superb. It had taken me almost two weeks to finish about a fifth of the quilting I had started on my older machine. Yet I finished the entire rest of the quilt in six days on the new machine. The whole time I kept thinking, this is incredible! And quiet! (I listen to the radio while I work, and working with the 7700 I can actually hear the radio while I am working.) Where the thread was breaking once or twice and more every line of quilting on the DC2012, I think I had about three breaks total on the entire remainder of the quilt with the 7700. Where I had a lot of little problems with puckering on the back of the quilt, even with the walking foot, on the 2012, and had to pull a lot of stitches and sew again, I had no puckering on the 7700, apart from one small spot, and that was my own mistake. I am waiting on some helping hands so I can take a good picture of the whole quilt in sunlight, but in the meantime here is a detail to give an idea of the quilted wavy line stitches. The extra wide throat space also is incredible. It makes a huge difference, being able to move so much of the bulk of a quilt without having to tug and push. Everything else about the machine: honestly everything else about the machine is less wow-inducing, and it has quirks, unsurprisingly, but nothing to detract from the satisfaction of that great quilting stitch. The placement of the bobbin winder for example on the top of the machine is really awkward to use. Likewise the built in horizontal spool. A thread stand with this machine is a foregone conclusion I think. And then the whole design of the top of the machine gets awkward, because it is always under the path of the thread. Minor stuff, but really it isn’t as well designed as it looks. The automatic thread cutter: This is a mixed bag. It works great if you are starting and stopping at an edge you will later trim or in a seam allowance and don’t mind a little tail of thread and some occasional nesting. But if you are starting and stopping anywhere that counts, especially if the back surface counts, the results are uneven. Little tails on the back after the thread cuts. Some bunching at the start that seems impossible to avoid. As a result I find I am not using the thread cutter any place where I care a lot about the look of the finished sewn surface, i.e. where I think the actual starting and stopping points on the back of the quilt will show. The user interface with the jog dial and select button works fine, but is also a bit fussy. In particular it is easy to almost select a stitch, and not get there. Several times I thought I had selected a new stitch and only realized as I was sewing and the stitch didn’t look like I was expecting, that the reason was because it wasn’t the stitch I was expecting. Because I had forgotten to press the center select button after jogging the dial to the stitch I wanted. (The prior two sentences make perfect sense, if you have used the machine at all.) Though the acufeed works great, its placement by the presser lift gets in the way whenever you change feet or remove the shank. The included knee lift works as advertised. The stitch selection on the machine is big, and I made a stitchionary to see what they all look like. Everything works well, though realistically I don’t see much use for most of these stitches, at least not in a quilting way. The monogram alphabets are cute and seem like they will be good for making quilt labels, though no substitute for proper embroidery. (Not that I have any idea what I would do with it, but moving quickly up my wish list is an embroidery machine…) The 02 quarter inch foot. This foot so far is a bit of a disappointment. It works, but also flexes slightly, and as it flexes the flange clanks on the right set of feed dogs and makes a grating noise. I realize many users of this machine really like this foot, and don’t like the original quarter foot, but for whatever reason my experience so far is the opposite. I have found that the regular quarter foot is more stable and doesn’t clang, though it is not as “scant” as the 02 foot. In a fit of optimism when I bought the machine I also bought the acufeed quarter foot, but it is more like a half inch foot, it is so wide, which means a big adjustment of the needle drop to get it down to reasonable size, which means it isn’t possible to use it with the straight needle plate, which seems a lapse in design. The clear quarter inch foot is looking more and more like a good option, but also I am a bit irked at having to spend any more money for a small piece of plastic that I think should have been included from the start. The automatic plate converter. This works great. The only hitch is that if you are using a D1/2/3 straight stitch a lot, make sure to program the machine to its resumption setting. Otherwise every time you turn on the machine, it will reset the plate, and this is really irritating. The included extension table. It is fine for working with medium and small pieces of fabric, but not as sturdy as it looks and no comparison with a proper flush table. I was able to finish comfortably a full size quilt, but I will definitely be investing in a table big enough to hold the bed level with a larger surface before I start working on the next one. The needle plate is quite awkward to remove for cleaning. Something about the placement of the screws and also the bulk of the shank and acufeed. The built in led lights are fine, but not nearly enough on their own to see clearly the sewing area. Not even close. All of this is small potatoes in the end, compared with how wonderfully the machine does the thing I care about most, and with a difficult thread no less. As for free motion quilting, I have only played around with a quilt sandwich, and it seems to work quite well, much better than the DC 2012. With the old machine (does three years count as old?) I didn’t think seriously about getting into free motion quilting. With this machine, I am seriously starting to think about it. If you’ve read this far, last but not least you are probably wondering, what did this cost? I paid $1699. Not small change, but significantly less than the retail on the major websites, and perhaps discounted because it is was older stock… The comparable Bernina machine (750) that I played with at the quilt show was $4159. It was really beautiful and I had to walk away slowly after using it and take a deep breath, and remind myself that I have lived my whole life without such an expensive sewing machine and until that moment never minded, and that I can continue to do so. I had never used a Bernina before, and the stitch regulator is kind of amazing, though the cost is kind of amazing too. So yeah, I am very settled with the Horizon 7700 and we are getting along great and I think we will have a very long and productive relationship, but just between us, do I fantasize sometimes about what it would be like to come home to that Bernina every day? It’s okay to fantasize, no? Six months update: Like all relationships, the early infatuation is over and I can now report some more sobering facts about this machine. A minor nuisance: the needle threader broke about six weeks after I got the machine. Costs about eight dollars to replace and not a big deal, but a nuisance. More disconcerting, the automatic plate converter busted. Twice. The little slip of metal on the top of the plate that slides back and forth to convert from straight stitch to zigzag is very delicate, as is the spring mechanism on the underside of the needle plate. A minor mishap with a pin or even nesting thread can pop off the spring, twist the black metal underside, and snap loose the sliding bit. Remove the whole thing carefully and hope that none of the small pieces are lodged in the bobbin case. The underside of the free arm removes with two screws and any sharp bits drop out with a blast of air. With a pliers it is possible to snip out the twisted remnants of black metal from the underside of the plate and then reinstall it and use it. The first time it broke I ordered a new needle plate. Forty dollars. I thought maybe I was just unlucky. This time I am thinking, better in theory than in practice, the whole plate conversion design. I wish instead the machine had two plates that were easy enough to pop in and out. Oh wait, is that how the Bernina works? Also I am finding, as I think some others have reported, that piecing and other sewing on the machine is not as hundred percent reliable as I wished In fact the DC 2012 is better for piecing and attaching zippers and similar tasks. Something perhaps about the spacing of the feed dogs? Not really sure, but I spent a week back with the old machine, the first time the needle plate broke, and it was a bit of a revelation, how great the smaller machine worked. For quilting the 7700 so far continues to perform as wonderfully as it did the day I got it home. But I do think that a machine at this price point should ideally perform more consistently across all its functions. And especially that the needle plate is a good idea that turns out to be a bad idea.

Teaching students how to use a sewing machine is one of the pleasure of my job. Showing them what each part of the machine can do and how to...

47 p. 24 cm

This is a guide to getting better result with twin needle, also known as double needle. I happened to read a blog post about using twin ...

Wir zeigen Ihnen hier, wie dieses Zubehörteil benutzt wird und wie Sie mit dem Zirkellineal ganz einfach Blüten nähen können.

This stitch is called by everyone Jacobean Couching, but everyone also seems to have another name for it, like Laid Filling or Trellis Stitc...

BERNINA Stitch Recipes—Then & Now … More

BERNINA Stitch Recipes—Then & Now … More

Everyone has decorative stitches on their sewing machines but what do you do with them? We will show you 5 easy ideas how to put those stitches to good use!

Want to give your quilting some added texture and depth? Try machine quilting with 12 wt. thread! It's not difficult, but there are 5 secrets you must know.

THE FINAL WORD: I have been neglecting to update this review, and a final word is now in order. About five months ago the machine conked out. I turned it off and when I turned it on an hour later, nothing. I took it to a very reputable technician, and his report was fatal. The motherboard on the machine was dead and Janome was not shipping replacements with no indication whether, if at all, a replacement board would become available. The best the technician could do was replace the power supply so that the machine turns on and off, and runs in a straight stitch, and only a straight stitch, with the needle plate in the zig-zag position. So I can't even get a straight stitch with the needle plate in a straight stitch position. I am still using the machine, as it runs fine in its extremely limited present mode, but the verdict is grim: the machine turned out a dud and I will not buy another Janome at this level. The machine lasted less than four years total. I now think more than ever that a mechanical machine is the only way to go, new or used. I haven't made any changes yet, but when I do, a servo-motor Juki straight stitch is definitely in the mix, along with a Singer U series zig zag, or a used Bernina or Pfaff from the 60s or similar. Or maybe a used Janome 1600P if one turns up. On the bright side, the first machine I bought, my Janome DC2012, runs as good as ever, and I also have a Janome 643D serger that I bought used and it is sailing right along after five years of regular use. So I am not totally soured on Janome machines, but I am completely turned off by the high end computerized machines and really think they are a trap. Just my current thoughts after some serious ups and downs with this machine, loving what it accomplished and mourning its collapse. ******** After six months now with the machine, I have added some updates to my review. Details are at the end of this posting, but in a word my current assessment of the machine: more of a mixed bag than I expected. Three years ago I bought my first new sewing machine – a Janome DC 2012. It seemed like a big commitment at the time, and a lot of sewing machine, more perhaps than I could use, but it is now four queen-size and two full-size and four baby quilts later and I have recently upgraded to a newer new machine. For a while I had been thinking about going bigger. (Like from the moment I walked out of the store with the first machine!) But this past spring I started seriously to research the options, and the one machine that kept coming up again and again as I surfed online was the Horizon 7700. I didn’t find a lot of reviews, but the ones I found were quite helpful, and I am adding my own early impressions, after four weeks together, in hopes it will be useful to similarly crafty folks. A bit of background: At the start of June I was trying to quilt with a 100 weight invisafil thread, and the thread kept breaking and nothing I could do was working, and I realized that it would take me months and months to finish the top at the rate I was going. Then there was the endless wrangling to get the quilt through the throat of the machine. Productive as my relationship with the DC 2012 had been, I seemed to be pushing its limits. The big quilt show was in Chicago the third weekend of June, so I decided to go and try out different machines. Not that I would buy anything, but just do some research, so that I could make a measured decision, nothing impulsive. And you all know how that ended! So about the machine itself, to start with the best: Straight line and wavy line quilting with the built in acufeed foot is superb. It had taken me almost two weeks to finish about a fifth of the quilting I had started on my older machine. Yet I finished the entire rest of the quilt in six days on the new machine. The whole time I kept thinking, this is incredible! And quiet! (I listen to the radio while I work, and working with the 7700 I can actually hear the radio while I am working.) Where the thread was breaking once or twice and more every line of quilting on the DC2012, I think I had about three breaks total on the entire remainder of the quilt with the 7700. Where I had a lot of little problems with puckering on the back of the quilt, even with the walking foot, on the 2012, and had to pull a lot of stitches and sew again, I had no puckering on the 7700, apart from one small spot, and that was my own mistake. I am waiting on some helping hands so I can take a good picture of the whole quilt in sunlight, but in the meantime here is a detail to give an idea of the quilted wavy line stitches. The extra wide throat space also is incredible. It makes a huge difference, being able to move so much of the bulk of a quilt without having to tug and push. Everything else about the machine: honestly everything else about the machine is less wow-inducing, and it has quirks, unsurprisingly, but nothing to detract from the satisfaction of that great quilting stitch. The placement of the bobbin winder for example on the top of the machine is really awkward to use. Likewise the built in horizontal spool. A thread stand with this machine is a foregone conclusion I think. And then the whole design of the top of the machine gets awkward, because it is always under the path of the thread. Minor stuff, but really it isn’t as well designed as it looks. The automatic thread cutter: This is a mixed bag. It works great if you are starting and stopping at an edge you will later trim or in a seam allowance and don’t mind a little tail of thread and some occasional nesting. But if you are starting and stopping anywhere that counts, especially if the back surface counts, the results are uneven. Little tails on the back after the thread cuts. Some bunching at the start that seems impossible to avoid. As a result I find I am not using the thread cutter any place where I care a lot about the look of the finished sewn surface, i.e. where I think the actual starting and stopping points on the back of the quilt will show. The user interface with the jog dial and select button works fine, but is also a bit fussy. In particular it is easy to almost select a stitch, and not get there. Several times I thought I had selected a new stitch and only realized as I was sewing and the stitch didn’t look like I was expecting, that the reason was because it wasn’t the stitch I was expecting. Because I had forgotten to press the center select button after jogging the dial to the stitch I wanted. (The prior two sentences make perfect sense, if you have used the machine at all.) Though the acufeed works great, its placement by the presser lift gets in the way whenever you change feet or remove the shank. The included knee lift works as advertised. The stitch selection on the machine is big, and I made a stitchionary to see what they all look like. Everything works well, though realistically I don’t see much use for most of these stitches, at least not in a quilting way. The monogram alphabets are cute and seem like they will be good for making quilt labels, though no substitute for proper embroidery. (Not that I have any idea what I would do with it, but moving quickly up my wish list is an embroidery machine…) The 02 quarter inch foot. This foot so far is a bit of a disappointment. It works, but also flexes slightly, and as it flexes the flange clanks on the right set of feed dogs and makes a grating noise. I realize many users of this machine really like this foot, and don’t like the original quarter foot, but for whatever reason my experience so far is the opposite. I have found that the regular quarter foot is more stable and doesn’t clang, though it is not as “scant” as the 02 foot. In a fit of optimism when I bought the machine I also bought the acufeed quarter foot, but it is more like a half inch foot, it is so wide, which means a big adjustment of the needle drop to get it down to reasonable size, which means it isn’t possible to use it with the straight needle plate, which seems a lapse in design. The clear quarter inch foot is looking more and more like a good option, but also I am a bit irked at having to spend any more money for a small piece of plastic that I think should have been included from the start. The automatic plate converter. This works great. The only hitch is that if you are using a D1/2/3 straight stitch a lot, make sure to program the machine to its resumption setting. Otherwise every time you turn on the machine, it will reset the plate, and this is really irritating. The included extension table. It is fine for working with medium and small pieces of fabric, but not as sturdy as it looks and no comparison with a proper flush table. I was able to finish comfortably a full size quilt, but I will definitely be investing in a table big enough to hold the bed level with a larger surface before I start working on the next one. The needle plate is quite awkward to remove for cleaning. Something about the placement of the screws and also the bulk of the shank and acufeed. The built in led lights are fine, but not nearly enough on their own to see clearly the sewing area. Not even close. All of this is small potatoes in the end, compared with how wonderfully the machine does the thing I care about most, and with a difficult thread no less. As for free motion quilting, I have only played around with a quilt sandwich, and it seems to work quite well, much better than the DC 2012. With the old machine (does three years count as old?) I didn’t think seriously about getting into free motion quilting. With this machine, I am seriously starting to think about it. If you’ve read this far, last but not least you are probably wondering, what did this cost? I paid $1699. Not small change, but significantly less than the retail on the major websites, and perhaps discounted because it is was older stock… The comparable Bernina machine (750) that I played with at the quilt show was $4159. It was really beautiful and I had to walk away slowly after using it and take a deep breath, and remind myself that I have lived my whole life without such an expensive sewing machine and until that moment never minded, and that I can continue to do so. I had never used a Bernina before, and the stitch regulator is kind of amazing, though the cost is kind of amazing too. So yeah, I am very settled with the Horizon 7700 and we are getting along great and I think we will have a very long and productive relationship, but just between us, do I fantasize sometimes about what it would be like to come home to that Bernina every day? It’s okay to fantasize, no? Six months update: Like all relationships, the early infatuation is over and I can now report some more sobering facts about this machine. A minor nuisance: the needle threader broke about six weeks after I got the machine. Costs about eight dollars to replace and not a big deal, but a nuisance. More disconcerting, the automatic plate converter busted. Twice. The little slip of metal on the top of the plate that slides back and forth to convert from straight stitch to zigzag is very delicate, as is the spring mechanism on the underside of the needle plate. A minor mishap with a pin or even nesting thread can pop off the spring, twist the black metal underside, and snap loose the sliding bit. Remove the whole thing carefully and hope that none of the small pieces are lodged in the bobbin case. The underside of the free arm removes with two screws and any sharp bits drop out with a blast of air. With a pliers it is possible to snip out the twisted remnants of black metal from the underside of the plate and then reinstall it and use it. The first time it broke I ordered a new needle plate. Forty dollars. I thought maybe I was just unlucky. This time I am thinking, better in theory than in practice, the whole plate conversion design. I wish instead the machine had two plates that were easy enough to pop in and out. Oh wait, is that how the Bernina works? Also I am finding, as I think some others have reported, that piecing and other sewing on the machine is not as hundred percent reliable as I wished In fact the DC 2012 is better for piecing and attaching zippers and similar tasks. Something perhaps about the spacing of the feed dogs? Not really sure, but I spent a week back with the old machine, the first time the needle plate broke, and it was a bit of a revelation, how great the smaller machine worked. For quilting the 7700 so far continues to perform as wonderfully as it did the day I got it home. But I do think that a machine at this price point should ideally perform more consistently across all its functions. And especially that the needle plate is a good idea that turns out to be a bad idea.

Four years after my instructor at my machine mastery class told me to do it, I stitched out all the … More

If you are new to sewing, you might be wondering what the basic sewing machine stitches are. Click here for the top 6 stitches you will need.

Ösen, die perfekt zum Projekt passen und garantiert nicht mehr herausfallen. Dieses Ösen-Set ist die Lösung für individuelle Projekte.