Brand Lovetone Model Ring Stinger Finish Pink Year 1990s
STRICH PARADISE Digital Reverb Guitar Pedal, Reverb Guitar Effect Pedal with 3 Modes for Electric Guitar, True Bypass, Blue : Amazon.ca: Musical Instruments, Stage & Studio
A Mini version of the original: https://www.etsy.com/listing/1756180493/poly-form-flux-harmonizerarpeggiator An ethereal, moody harmonizer and arpeggiator with emergent, rhythmic tones controlled by the "Flux" knob. Demo video of original pedal (has the same sound capabilities): https://www.youtube.com/shorts/TW0tcWbwffs See a complete overview of the original pedal here: https://youtu.be/V6jSHaLVb5M - 2 tone modes: "Free FLUX" and Arpeggiator (on the mini you switch to Arpeggiator mode by turning the pitch knob all the way up) - Control the amount of fluctuation/range in the harmonizing note with the "FLUX" knob - Adjust the speed of the fluctuation/arpeggiation with the RATE knob - 3 keys: Major, Perfect and Minor (based on triads) - Harmony PITCH range from 1 octave down to 2 octaves up - Mix the dry and wet signals with the MIX knob - GAIN knob for bringing up low output instruments and quieting high output ones - True Bypass - TRS Support (Uses T for the effect and passes R through) The difference between the Mini and the original Poly Form is the original has additional modes and controls. The original has the capability to loop a harmonization in 2 different ways and has a dedicated switch for changing to Arpeggiator mode. Other than that, they have the same audio capabilities and can produce the same sounds. This pedal has a really meditative vibe and I often find myself playing much differently than I normally would because of what the pedal brings out in my sound. Feel free to message me with any questions, and if you have any special requests I may be able to accommodate them, no promises ;)
Musiclily Pro Octave Fuzz Guitar Effects Pedal DC 9V Adapter Powered for Electric Guitar Bass True Bypass : Amazon.ca: Musical Instruments, Stage & Studio
Alabs ORBITAL Pitch Shifter Pedal for Electric Guitar,Octave Pedal with 9 Shift Types,Harmonic,Analog Dry Through,Momentary operation,True Bypass,True Stereo,Polyphonic,Multi-Expression Control : Amazon.ca: Musical Instruments, Stage & Studio
JOYO JF-330 Ocho Octave mini Guitar Effect Pedal : Amazon.ca: Musical Instruments, Stage & Studio
Fender Hammertone Fuzz Pedal : Amazon.ca: Musical Instruments, Stage & Studio
Satone S804 Hex Octave Fuzz Electric Guitar Effect Pedal - Classic Octave Fuzz Effect Preset Acoustic Metal Pedal with True Bypass : Amazon.ca: Musical Instruments, Stage & Studio
Alabs CETUS Reverb Pedals for Electric Guitar, Reverb Guitar Pedal with 9 Reverb Effects,Analog Dry Through,Freeze function, Adjustable Modulation,Multi-Expression Control, True Bypass,True Stereo : Amazon.ca: Musical Instruments, Stage & Studio
Source Audio Collider Delay & Reverb Pedal : Amazon.ca: Musical Instruments, Stage & Studio
Caline CP-53 Fuzzy Face Voodoo Octave Guitar Effect Pedal : Amazon.ca: Musical Instruments, Stage & Studio
The MXR M306 Poly Blue Octave effects pedal brings modern and classic pitch-shifting styles together with fuzz and modulation, creating the ultimate octave pedal for tone crafters and sonic seekers. The M306 Poly Blue Octave features four separate octave divisions—one octave down, two octaves down, one octave up and two octaves up—and get to control the level of each in the mix. Each is polyphonic by default, which means they sound just as amazing with chords as they do with single-note passages. dry signal gets its own level control as well, so can dial in the perfect blend of pitch-shifted tones. The M306 Poly Blue Octave also comes equipped with an unruly fuzz that’s inspired by the classic MXR Blue Box Fuzz. Applied to all five signals, the fuzz volume can be adjusted using the Dry knob after pressing and holding the Fuzz button. When used with the sub-octave signals, the fuzz sounds thick and subterranean. Over the higher pitched signals, the fuzz is searing and synth-like. Run them all at the same time for a choir of thunder and lightning. The MXR M306 Poly Blue Octave delivers high-performance pitch shifting, fuzz and modulation in a ruggedly reliable housing with true-bypass switching. Put this into signal chain and open up new sonic frontiers.
Pédale d'effets Earthquaker Devices Tentacle®Octave analogiqueLe Tentacle est un effet classique d'octave analogique. C'est le même octave que celui de notre pédale Hoof Reaper bien-aimée. Nous avons reçu tellement de demandes pour en faire une unité autonome que nous avons dû en faire une réalité. Vous pouvez maintenant ajouter une excellente octave à tout ce que votre cœur désire ! Associez-le à votre fuzz préférée, mettez un bandeau et libérez le Jammy Hendrix qui est en vous. Mettez-le en face d'un autre octave up et épatez vos amplis. Lancez-le dans la boucle d'effets d'un delay et émerveillez-vous de ce qui se passe (puis dites-le nous, nous aimerions le savoir aussi). Et le meilleur ? Il n'a aucun contrôle ! Il n'y a aucun souci à se faire, il suffit d'appuyer sur l'interrupteur et de se lancer. Le Tentacle est une octave analogique supérieure, l'effet sera beaucoup plus prononcé si vous utilisez votre micro manche et jouez au-dessus de la 12ème frette.Caractéristiques :Dimensions : 121 x 64 x 51 mm (4,75 x 2,50 x 2,00 in.) avec pédale de commandeConsommation de courant : 10 mAImpédance d'entrée : 100 kΩImpédance de sortie :
Dunlop MXR SF01 Slash Octave Fuzz, Black : Amazon.ca: Musical Instruments, Stage & Studio
Purchased new in 2016 and in excellent condition. From Sunshine Audio:It’s a fuzz pedal, octave/harmony pedal, filter, wah, synth – Well, the Harmonic Decoder may have a split personality and not really sure what it is, but one thing is certain, this pedal will perk up those creative juices!At it's heart the Harmonic Decoder from Sunsine Audio is a true single oscillator analog synth. It is built around a phase lock loop circuit that allows for a varitety of effects.One minute the Harmonic Decoder is a fuzz, the next it acts like a harmony or octave pedal that tracks naturally and easily. Tweak the Freq, Volume, Depth or Env/CV toggle and you get classic filter and wah effects, a complex waveshaper or even some 8 bit glitch and cut type effects.This is not your Dad’s guitar pedal, the Harmonic Decoder is meant for experimentation by those looking to do more than just recreate the tones of a by-gone era.Specs:Phase Lock Loop (PLL) DeviceAnalog VCOEnvelope FollowerExternal Control Voltage Input (1/8 inch)Accepts any 2.1mm 9 Volt Negative Pin DC Adapter (not included)High Quality ComponentsRugged Aluminium Knobs and EnclosureAll Analog Signal PathTrue Bypass
Multi-effectpedaal voor elektrische (bas)gitaar Flexibel en gebruiksvriendelijk TonePrint-pedalboard Elke board bestaat uit 5 vrij configureerbare TonePrint-pedalen 127 Aanpasbare memory presets (boards) 75 TonePrint FX memory presets per pedaal Aanpasbare FX-signaalketen Geïntegreerde MASH-technologie verandert alle 5 de voetschakelaars in expression controllers met aanpasbare toewijzingen, zelfs voor oudere TonePrint-pedalen Verstelbare FX loop insert voor externe pedalen Ingebouwd, chromatisch stemapparaat Omschakelbare speaker cab simulation Tap tempo voor tijdgebaseerde FX Bluetooth-verbinding met de gratis TonePrint-app - hiermee kunt u TonePrints importeren en maken en krijgt u toegang tot honderden effectparameters LED: effect aan Voetschakelaar: effect bypass Ingangen: 2x 6,3 mm Jack (L & R) Uitgangen: 2x 6,3 mm Jack (L & R) MIDI In & Out/Thru Aansluiting netvoeding: holle connector 5,5 x 2,1 mm, minpool binnen Stroomvoorziening via 9 V DC-netvoeding Incl. netvoeding Let op: kan niet op batterijen gebruikt worden Toneprint-pedalen die o.a. zijn inbegrepen: Hall Of Fame 2 Reverb Flashback 2 Delay Sub n Up Octaver Brainwaves Pitch Shifter Corona Chorus Hypergravity Compressor Mimiq Doubler Vortex flanger Pipeline tap tremolo Quintessence Harmony Sentry noise gate Shaker vibrato 30 30 dagen Money-back garantie 3 Drie jaar Thomann garantie Leverbaar sinds April 2020 artikelnummer 486712 verkoopseenheid 1 stuk Design Floorboard Amp Modeling No Drumcomputer No Incl. Tuner Yes Expression Pedal No USB-Port Yes Headphone Output No MIDI Interface Yes Line Out Yes Battery Powered No PSU included Yes Incl. power supply 1
MXR Octavio Fuzz Guitar Effects Pedal (M267) : Amazon.ca: Musical Instruments, Stage & Studio
Caline Harmonizer Pedal Digital Octave Electric Guitar Effect Pedal 7 Modes True Bypass Aluminum Alloy Housing Big Dipper Brown CP-36 : Amazon.ca: Musical Instruments, Stage & Studio
Behringer UO300 Ultra Octaver 3-Mode Octaver Effects Pedal : Amazon.ca: Musical Instruments, Stage & Studio
The circuitbenders Harmonic Engine PCB is a clone of the E&MM Harmonic Generator. This was a project by Paul Williams, published in Electronics & Music Maker magazine way back in 1981.The circuit uses a 4046 Phased Locked Loop (PLL) to track an input signal and generate a squarewave output at harmonic intervals to the frequency of the input. The squarewave can be set to +/- three octaves, and can also produce 3rd or 5th harmonies. Thats the theory anyway. In practice the note tracking only works really reliably if you use very basic waveforms at the input. If you use anything else, then everything very quickly descends into a beautiful kind of chaos, with all kinds of bizarre gurgling digital squeaks and squeals vomiting forth. Its especially effective with percussion sounds, converting each hit into some kind of warped electronic splatter. This is just the bare unpopulated PCB. We do not supply kits for the full build, Theres nothing rare or very difficult to get hold of in this build, although the 4526 4-bit binary counter IC appears to be one of those little used 4000 series CMOS chips that aren't stocked by many component suppliers. Theres no setup or calibration involved, and theres nothing complex to go wrong, so as long as you are careful with your soldering theres no reason why this shouldn't be a beginners project. The PCB has board mounted pots at the front and a eurorack power connector at the back, so it could easily be used as a modular synth module and we do sell a eurorack panel but theres no reason that you couldn't use it as a stand alone effect in a desktop case, or wire the pots to the board so you could use it as a guitar pedal. PLEASE NOTE: The standard PCB is ideally designed to operate at line and mic levels, so if you're building it as a eurorack module using the optional panel, you may need a way of attenuating the signal on the way in, and possibly boosting it on the way out. This is precisely what our Redshift Dual Level Shifter is designed to do. You can find this in our other listings. You can download the build guide and parts list from: http://www.mediafire.com/download/6tq7aflvr68tbrb/circuitbenders+Harmonic+Engine+build+guide.pdf You can find a couple of demo videos of this board in action on YouTube at: https://www.youtube.com/watch?v=qc577U3gsTI and https://www.youtube.com/watch?v=Jzniz8twFMo The board will run on a 9v battery or a 12v power supply, but check out the build guide for power options.
The circuitbenders Harmonic Engine PCB is a clone of the E&MM Harmonic Generator. This was a project by Paul Williams, published in Electronics & Music Maker magazine way back in 1981.The circuit uses a 4046 Phased Locked Loop (PLL) to track an input signal and generate a squarewave output at harmonic intervals to the frequency of the input. The squarewave can be set to +/- three octaves, and can also produce 3rd or 5th harmonies. Thats the theory anyway. In practice the note tracking only works really reliably if you use very basic waveforms at the input. If you use anything else, then everything very quickly descends into a beautiful kind of chaos, with all kinds of bizarre gurgling digital squeaks and squeals vomiting forth. Its especially effective with percussion sounds, converting each hit into some kind of warped electronic splatter. This is just the bare unpopulated PCB. We do not supply kits for the full build, Theres nothing rare or very difficult to get hold of in this build, although the 4526 4-bit binary counter IC appears to be one of those little used 4000 series CMOS chips that aren't stocked by many component suppliers. Theres no setup or calibration involved, and theres nothing complex to go wrong, so as long as you are careful with your soldering theres no reason why this shouldn't be a beginners project. The PCB has board mounted pots at the front and a eurorack power connector at the back, so it could easily be used as a modular synth module and we do sell a eurorack panel but theres no reason that you couldn't use it as a stand alone effect in a desktop case, or wire the pots to the board so you could use it as a guitar pedal. PLEASE NOTE: The standard PCB is ideally designed to operate at line and mic levels, so if you're building it as a eurorack module using the optional panel, you may need a way of attenuating the signal on the way in, and possibly boosting it on the way out. This is precisely what our Redshift Dual Level Shifter is designed to do. You can find this in our other listings. You can download the build guide and parts list from: http://www.mediafire.com/download/6tq7aflvr68tbrb/circuitbenders+Harmonic+Engine+build+guide.pdf You can find a couple of demo videos of this board in action on YouTube at: https://www.youtube.com/watch?v=qc577U3gsTI and https://www.youtube.com/watch?v=Jzniz8twFMo The board will run on a 9v battery or a 12v power supply, but check out the build guide for power options.
Vocal Processor 12 Verschillende voice effects zoals pitch-correctie, unisono, octave up, octave down, talkbox of vocoder Harmony-sectie voor tot twee backing vocals in selecteerbare toonsoort 10 Studio-effecten zoals reverb, echo, chorus of telefoonstem Formant-expressiepedaal verandert de stemkarakteristieken zonder de toonhoogte te veranderen Geïntegreerde looper met opnametijd van 3:30 minuten Geïntegreerde compressor, EQ en de-esser 40 Preset patches en geheugenplaatsen voor 100 user patches Kan tot 3,5 uur op batterijen worden gebruikt (4 x AA Mignon) USB 2,0 audio-interface met 16/24/32 bit en 44,1 kHz Aansluitingen: XLR-microfooningang (+ 48V-fantoomvoeding omschakelbaar), pedaalingang (6,3 mm Jack), micro-USB-B-poort, hoofdtelefoonuitgang (3,5 mm stereo Jack), XLR Line output, ingang netvoeding Afmetingen (B x D x H): 181 x 320 x 77 mm Gewicht: 1,56 kg Incl. netvoeding AD-16 en snelstartgids 30 30 dagen Money-back garantie 3 Drie jaar Thomann garantie Leverbaar sinds Juni 2022 artikelnummer 546135 verkoopseenheid 1 stuk
Meet the new BOSS harmonist, with four intelligent pitch-shift effects and three-voice harmony in one convenient unit. Among the effect modes are Harmony, Pitch Shifter, and Detune, plus the all-new Super Bend for authentic pedal-bending effects and wild three- and four-octave pitch sweeps. You can even control pitch with an optional expression pedal. The harmony function is fast and simple to use, and supports a variety of interval patterns. It’s easy to create rich, three-voice harmony: choose a major or minor key, and set SHIFT to 3-VOICE—that’s it! The PS-6 Harmonist is an unbeatable combination of superior sound quality, ease of use, and powerful pitch effects, all under one hood. Four effect modes in one stompbox: Harmony, Pitch Shifter, Detune, and S-BEND (Super Bend) Easily create two- or three-voice harmonies with selectable key and voicing High-quality pitch shifting Three-voice Detune capability Super Bend provides up to four octaves of extreme pitch bending Control pitch via expression pedal (optional BOSS FV-500L/H or Roland EV-5) BOSS five-year warranty
Easy operation allows you to create up to three-part harmony. Equipped with a high-quality pitch shifter function. Super Bend mode allows you to shift the pitch by more than two octaves. Pitch control is possible with an expression pedal.
Brand DigiTech Model Whammy 5 Pitch Shift Pedal Finish Red Year 2010s Made In United States Categories Filter and Wah Pedals Octave and Pitch-Shifting Pedals
The Mooer Pitch Box brings you clean, precise, polyphonic pitch shifting, in a small package. The Pitch Box features 3 modes (Harmony, Pitch Shift and Detune). Harmony mode shifts the pitch and blends it with the original signal, to create the desired harmony. Pitch Shift mode gives you a precisely pitch shifted note, based on the set interval. Detune mode slightly shifts the pitch and mixes it back with the original note; this creates an, almost, chorus-like effect. The Mooer Pitch Box features a 2 Octave up/down pitch range. Product Details: Mode Switch harmony, pitch shift, detune Pitch adjust the range of the pitch shifting sound Power Supply Center Negative 9V Supply (Not Included) Dimensions (HxWxD) 93.5 x 42 x 52mm Weight 170g Switching True Bypass Model Mooer Pitch Box Note: Power supply not included. Please use the 9V power adapter whose polarity is negative center otherwise, the product may not work properly. Package List: 1 * Effect Pedal 1 * User Manual(English & Chinese) 1 * Year warranty through our store No Duty to Canada and USA FAST 'N FREE USA Shipping (typically about 4 days) Ships from Canada *Just to be clear on DUTY, (regardless of what Etsy warns buyers of ) Canada and the USA have a trade agreement in place that allows US citizens to purchase/import up to $800 dollars per purchase in to the United States from Canada with NO Duty at all, State taxes are another story, some states charge a TAX some do not, BUT NO duty.
TC Electronic NETHER OCTAVER Classic All-Analog Octave Pedal with 1 or 2 Octaves Below Original for Adding Warm Deep Bottom End : Amazon.ca: Musical Instruments, Stage & Studio
The swarm is an analog fuzz harmonizer that sounds like a thousand killer bees coming to get you! It basically turns your input signal into a square wave, than multiplies and divides the frequency of that wave, giving you nine possible harmonies in two different octaves. modulation is applied to the harmonies making them go from a nearly perfect tracking harmony, to a wild and uncontrollable swarm of mad bees. The worker sets the level of your input signal, now fuzzy and buzzy. the species allows you to select between 9 different intervals for your harmonies. the queen and drone set the levels for each of the harmonies that stay one octave apart. The flight and sting control the modulation applied to the harmonies. they are highly interactive controls and you will find many different sounds by just messing with these. sting sets how fast or slow the harmonies will follow your playing. turn it ccw for it to feel like the harmonies sting you at every note you play. turn it cw and the harmonies will sound like a drunk bee hovering up and down around the root. flight will set the response of the modulation. ccw the harmonies will keep it oscillating up and down, while cw it will glide and hold from one note to the next. The master control will set your output volume. true bypass hand made in california.
LLP harmonizer with modulation Input signal is converted to square wave fuzz 8 types of upper octave and harmony programs 8 types of subharmonics and harmony programs Use the mixer section on the top of the main unit to create fuzz and 2 harmonies You can freely control the mixture of
Brand DigiTech Model Bass Whammy Pitch Shift Pedal Finish Blue Year 2010s Made In United States Categories Bass Effect Pedals Octave and Pitch-Shifting Pedals
La nouvelle pédale BOSS Harmonist propose des effets Pitch Shift intelligents et une fonction d’harmonie à 3 voix. Vous avez le choix entre quatre modes d’effet: Harmony, Pitch Shifter, Detune et Super Bend (variations de hauteur entre –3 et +4 octaves!). La fonction d’harmonie est très simple à utiliser et permet de choisir différentes répartitions des intervalles. Créez une riche harmonie à 3 voix en trois coups de cuillère à pot: choisissez la tonalité, choisissez majeur ou mineur et réglez SHIFT sur «3-voice». Vous pouvez même piloter la hauteur avec une pédale d’expression (Roland EV-5 etc.). * 4 modes d’effet en un: Harmony, Pitch Shifter, Detune, S-BEND * Harmonies à 3 voix avec tonalité et répartition des voix au choix * Pitch Shifter d’une qualité sonore exceptionnelle * Fonction «Detune» à 3 voix * Enormes variations de hauteur avec «Super Bend»: de –4 à +3 octaves * Contrôle de la hauteur avec une pédale d’expression (en option, Roland EV-5 etc.) * Niveau d’entrée nominal –20dBu * Impédance d’entrée 1MΩ * Niveau de sortie nominal –20dBu * Impédance de sortie 2,2kΩ * Impédance de charge recommandée 10kΩ ou plus * Commandes Commutateur au pied, Commande BALANCE, Commande SHIFT, Commande FALL TIME, Commande MODE. * Témoin CHECK (sert aussi de témoin de tension pour la pile) * Prises Prise INPUT, Prise OUTPUT, Prise pour adaptateur * Alimentation DC 9V: Pile de type 6F22 (9V) (carbone), Pile sèche alcaline 6LR61 (9V), Adaptateur secteur (série PSA: en option) * Consommation 40mA (DC 9V) * Durée de vie estimée des piles en utilisation continue Carbone: 2,7 heures, Alcalines: 9 heures * Dimensions 73 (H) x 129 (L) x 59 (P) mm * Poids 440g (pile comprise) * Accessoires Mode d’emploi, Feuillets («Consignes de sécurité», «Remarques importantes» et «Information»), Pile sèche 006P/9V (6LR61) * Options Adaptateur secteur (série PSA)* La pile fournie avec ce produit sert avant tout à tester ce produit et sa durée de vie est donc limitée.* Nous vous conseillons de la remplacer par une pile alcaline.* 0dBu= 0,775Vrms* Les données techniques sont susceptibles d’être modifiées sans préavis.