New materials being used to make a dollhouse miniature vintage kitchen scale.

This one’s an oldie but a goodie.  Refashion a knit shirt by inserting panels of fabric on the sides.  The practical reasons behind doing this refashion could be: 1. make a small shirt bigger 2. make a big shirt smaller 3. get rid of unsightly evidence of perspiration 4. use tapered fabric inserts to make... Read More »

Dear Dakota, How do you handle clients who refuse to give you a budget, despite explanations and an initial design presentation? This week’s Dear Dakota question comes from an interior designer who’s struggling to get a budget from clients—even after the initial design presentation. Talk about frustrating!!!!!!! If you’ve ever felt stuck in this situation, you’re not alone. Budget conversations can be tricky for a lot of the interior designers I talk to. Join The DTS Files for my advice and insights.

Every golfer knows that they need to practice in order to improve. Here we discuss how to build the perfect golf practice routine for maximum effectiveness.

The 27 best guitar chord progressions, complete with charts. These easy, common patterns are good for acoustic guitar, rock, or simple practice sessions.

Sewing alterations to a knit shirt so that you can lower the neckline to your taste. Altering clothing is not as hard as it seems.

Need polar graph paper? If you are a student, mathematician, or other technical engineer, this is expected. Can’t find it anywhere? This too is expected. We’ve all experienced at some point the anguish at having to get specialized stationery materials for homework or other projects, only to find that, predictably, your stationery stores don’t stock […]

This page was created by The Grappling Citadel with Hopp by Wix

Projects, Instructionals, Inspirations

How to use prefolds. Video and instructionals of how to use prefold cloth diapers.

Pinterest is rolling out a new set of guided tools and instructionals to help users who are dealing with mental health issues.

A BJJ techniques checklist to identify knowledge gaps, prioritise instructionals to watch, focus drilling... and make the most of limited time on mat!

I hope you guys are enjoying the videos of live training please give a thumb up if you like it.... [INSTRUCTIONALS]https://bjjfanatics.com/search?q=marcos%2...

Mittmaster is dedicated to helping Martial Arts instructors deliver world class lessons. Inside you will find detailed instructionals, syllabuses and lesson plans covering Boxing, Kickboxing, Muay Thai, MMA, Filipino Boxing & more

A simple, easy way to draw one of florida's most well know fish, the Spanish Mackerel. This is the second of my step by step instructionals on how to draw an...

Great recipe for Vickys Great White Shark Cake. My son wanted a Jaws cake for his birthday this year. He wanted the shark coming out of the water to bite something. I searched google for ideas but couldn't find any instructionals for this kind of cake so through trial and error I managed to make...

ebony limed buffet, via 1stdibs The last few years I have been getting more requests to "do something" with old furniture pieces, adding ornament, refinishing wood,  repairing gilding, etc. I love working on furniture and the special challenges each piece presents. "before" orange varnished oak One of the hardest things to work with is bright orange oak --- a tough one because of the assertive grain among other issues. Oh yes, you can fill it and paint it,  but why not find a way to work with it? In this age of cheap laminate furniture, solid wood is something to be celebrated! One project I had recently I took my inspiration from a midcentury piece of cerused oak, also known as limed oak. Inspiration:  1943 Paul Frankl limed oak dresser, at 1stdibs. In the sixteenth century this finish was created to help deter insects and rot in oak beams and paneling, by filling the grain with lime or lead-white and wax,  but after a while it became a fashionable way to lighten up and enhance the the look of the wood.     Cerused oak finishes  were also fashionable in Art Deco and midcentury interiors for  furniture, floors, cabinetry, and paneling, and is now once again very much on trend. Note: I am not talking about the pickled "slimy pink" whitewash that was all the rage in the 1980s.   A good cerused finish shows the grain in contrast to the rest of the surface.   High contrast between the wood and the grain is a really effective look.  Please note this is not a technique useful for any kind of soft wood (pine, cedar, redwood, etc.) nor do I advise trying this on any kind of plywood or veneer. Inspiration: circa 1950 James Mont bench in ebony limed oak. I found many instructionals for liming wood on the internet but none with pictures.  I like pictures!  So I decided to share the process of transforming this orange varnish oak piece into something more fabulous and moderne looking. How to Make a Cerused Oak Finish:   Apply Citristrip liberally. 1.  Make samples! Don't do this directly on a piece you care about. Always test an area or get some scrap wood to try out your materials! 2.  Strip and clean: First, we need to strip off that varnish.  I like Citristrip for this kind of thing. Let it sit for at least  a half hour then scrub in the direction of the grain with a stiff stripping pad or brush. raising the grain with a brass brush Once you have removed all of the varnish,  rinse the wood thoroughly with water. 3. Raise the Grain While the wood is still damp, scrub lightly with a brass brush. Brass will not discolor the wood nor be too rough. If you are starting with raw wood, simply get it wet and scrub it a bit to raise the grain.   Rinse thoroughly, then let dry. 4.  Light Sanding After the wood is dry, lightly sand to smooth out the top, and get all the dust and bits off with steel wool and/or stiff bristle brush. You should then have a very clean oak surface with pronounced grain pattern. Clean oak with deep grain pattern 5.  Dye the Wood Black Make sure your wood is dry, and let's get some color on it! Do not use "stain."  Stain will absorb into the softer  parts of the wood more than the rest of it.   Instead you want to dye it.  Apply the dye with a brush, rag, or pad ebonized oak Aniline dye will soak into all the wood evenly without leaving any kind of residue. You may get it in powder form - like raw pigment but much finer ground - to dissolve in water or denatured alcohol. Aniline dyes tend to be opaque, leave no lap marks, and dry quickly. There are also pre-mixed "super penetrating" dyes that use acetone as a vehicle and are very effective. If you buy this kind of thing, please read the MSDS carefully, and wear the proper protection. In some cases you need 2 applications if you want to get a good solid color. *****Note:  In this demo I used a dye that I had on hand, but check out this tutorial on how to make your own inexpensive iron acetate  to ebonize wood. This natural option for ebonizing wood  uses a solution made from steel wool and vinegar, and is an extremely effective and affordable way to blacken the oak.****** 6.  Seal the surface: At this point what we have is an evenly dyed, fairly matte, and absorbent surface. It needs to be sealed mainly to make it a bit slicker, which will make the following steps easier.  tinting  some amber shellac to a clear black Shellac is perfect for this as it will not build up or fill the grain, and it dries quickly. And if the shellac is tinted with a drop of black (or the same color as the dye underneath), it will add to the depth of the finish.  In addition to keeping the color from migrating into the wax, the shellac makes it easier to lightly wipe the liming off the surface while leaving it in the grain. Remember too much tint will slow the drying time of the shellac and add volume, so use just few drops. Apply one or two thinned coats of shellac to your surface and allow to dry thoroughly.   "liming wax"  my home-made mix of wax paste and whiting 7.  Liming: Liming wax is available pre-mixed but I made my own by mixing clear microcrystalline wax and whiting (chalk).   You can also use white powdered pigment or lime powder mixed into wax paste.    Make sure the wax paste you use is a type that will dry fairly hard, and does not turn yellow.  filling the grain with liming wax Rubbing the wax into the grain and removing excess Cover the whole surface, use a liberal amount of liming wax and push it into the grain with steel wool or a soft cloth. Immediately wipe off the excess with a soft cloth.  Sealing the surface with clear wax Let dry thoroughly. You can repeat the liming if needed,  or go straight to sealing.  8.  Seal the finish To seal this finish you need only add another layer or two of clear wax, and buff. Microcrystalline wax is made with low odor mineral spirits and dries quickly and quite hard and impervious.  finished surface! Options:   I have achieved this look using paints and acrylic finishes,  but I have to say using more traditional materials makes this far easier and the finish has more depth. It  feels very smooth to the touch and is quite durable as a furniture finish, and very easy to maintain. You may also try this finish with different colors.   And obviously, the nicer the  grain of the wood, the more appealing the finish will look. Lynne Rutter Studio