[ground shaking footfalls] [sudden silence] [sounds of heavy struggle] "Ehhhhh" "HOOOOOOO" "NYAH-HA-HAAA!" Yes, friends, Mr. Stay Puft has climbed the building. Orlando weather has been extra annoying lately, so John and I had to dash out on the only rain-free day out of the last 10 to do a trial run of our Ghostbusters setup. Even then it was still quite windy, so we had a stress-filled two hours of first puffing up Mr. Puft, and then watching him rock back and forth and knock around/over his support structures multiple times. Poor John got a work out scrambling up the ladder every 20 minutes to re-attach a line or drag him back into position. And yet, STAY PUFT SURVIVED! We're honestly shocked. These tissue-thin plastic tablecloths are earning their keep. With all the panic and running around I didn't get as many beauty shots as I'd like, but I did take as many phone photos and videos as I could to show you the transition from daytime to night. We still have a few more things we're going to add for the big night, but it's mostly all here. So c'mon, let me give you the tour! Here's the view from the sidewalk during the day. We used yard stakes and this caution tape to mark a clear path to the front door, since our driveway is too narrow to walk when the car's there. (Which it will be.) That embarrassing dead patch in the middle of our yard should be getting a few plastic bones stuck in soon. I realized while taking these photos that we might as well make it look like an intentional dug-up grave! This walkway will also keep folks clear of the extension cords and lights that they could trip on. Tim the Thestral (aka "Ghost Horse" to fit the GB theme) looks rather magnificent even in broad daylight: Every year I have to patch up his rib cage where the old putty cracked off or through, but his actual bones and head are holding up beautifully well. If I could do it again I'd cover his whole torso with Apoxy Sculpt instead; then he'd be indestructible. Our front door: I love the way our orange door looks with a coating of slime and caution tape! There's a planter under that giant vine bush where I usually set my pumpkin, but it's so overgrown it looks like Stay Puft-kin is just floating in a sea of foliage, ha. Oooh, maybe I should add some giant googly eyes in there! Instead of a wreath I bought this plastic "No Ghost" wall decoration, then taped a strand of LED lights inside it. The plastic is so thin that it glows really well. Here we are at dusk, when all our pretty colored lights are starting to show: This is John with our Slimer photo op the first time we set it up: You can see how we did the proton pack here: it's attached to an adjustable stand, and a steel bar is holding the wand in place. I wrapped the legs of the stand in caution tape, so hopefully folks won't trip getting into position. And here's how it is now, with Stay Puft looming overhead! This is another one of our neighborhood kids, since we again drew curious neighbors while we were setting up. I will say that the pack illusion is more convincing when you put your arm *over* the metal support bar, like this: We're thinking we'll probably end being outside the whole time to help coordinate the photos - and because I'm busy making a cute little throwing game kids can play for an extra prize. (Halloween better get here soon, because I'm just going to keep adding projects to this 'til it does!) Full dark here, when the Thestral Ghost Horse & Dog House really start to shine: We hooked up a fog machine to Zuul's dog house, which of course looks amazing with the colored spots. The fog comes from inside the doghouse, and almost completely obscures the head sometimes. Again, looks super cool. (And that's a flickering green light on it - the same green lights we used to make our Floo Portal at last year's Harry Potter party.) Here's some video of all the lights in action: That last snippet was taken while we were deflating Stay Puft. Gozer vanquished, for at least another night. Oh, and obviously I can't include music for copyright reasons, but we'll be blasting the Ghostbusters soundtracks all night, and I fully expect to perform the On Our Own rap multiple times in my Tully costume. I've been waiting my whole life for this. More majestic Tim photos: I'm so happy his eyes still work! You never know what will happen when you store things in a baking hot shed all year. Stay Puft has a white spotlight AND a flicking orange flame light on him. We kept the flame effect subtle since I still want Puft to look mostly white, but it does show up more than you can tell in photos & video. If I amp up the color you can sort of see how it looks IRL: Also the proton stream on Slimer looks SO GOOD here. We added a battery spot light under the eaves to light Slimer's face, plus there's a ground spot to light the whole scene when someone stands at the pack. We're in the process of deflating Stay Puft in that picture, so here's one last look at his smirk as he shrinks back into his other dimension: I hope you enjoyed the tour! The only other thing I'm adding is a giant "No Ghost" symbol throwing game, where kids can chuck a marshmallow through the ghost's mouth to win a prize. I'll set that up to the right of the proton pack on the driveway. This is just a sheet of blue insulation foam: we projected the logo for me to trace and paint in. We'll add an easel back and probably tape it to the driveway, since it's so light. It took me 15 tries to throw a marshmallow in his mouth, sooooo yeah. We're gonna make the mouth hole bigger. The prizes will be these tiny little slime putties: ... which I'm hoping to put "Ghost Goo" stickers on. (These are not edible, so I'll be stressing that while handing them to the parents, not the kids.) I got 48 of these little jars for only $15 on Amazon! In addition to all that, there will be at least three of us around in costume. John will be his own Ghostbuster in a faux khaki jumpsuit, I'll be a gender-swapped "Louise Tully", and our friend Karen will be Dana. We've invited all our local friends to come by, too, so if we're extra lucky we may have more fun characters goofing around with us. We'll see. We've been anxiously watching the forecast here, since it looks like this rain is going to continue all week, arg. Cross your finger for us: as of today the forecast says Thursday will be clear, and I REALLY hope it stays that way. Not gonna lie, I'll be pretty devastated if we get rained out. Stay tuned for the full report! ***** UPDATE: Dang, y'all. DANG. Here's the full report, I promise you don't want to miss this! :D
When ghosts, poltergeists, and other spirits come a haunting, who ya gonna call? Ghostbusters! Coveralls are essential work attire when the possibility of being covered in slime or marshmallow puff is a real job hazard.
Ghostbuster Costumes Made with Cricut! Who you gonna call? Ghostbusters! Make the perfect Ghostbusters jumpsuit costumes for cosplay, ...
[ground shaking footfalls] [sudden silence] [sounds of heavy struggle] "Ehhhhh" "HOOOOOOO" "NYAH-HA-HAAA!" Yes, friends, Mr. Stay Puft has climbed the building. Orlando weather has been extra annoying lately, so John and I had to dash out on the only rain-free day out of the last 10 to do a trial run of our Ghostbusters setup. Even then it was still quite windy, so we had a stress-filled two hours of first puffing up Mr. Puft, and then watching him rock back and forth and knock around/over his support structures multiple times. Poor John got a work out scrambling up the ladder every 20 minutes to re-attach a line or drag him back into position. And yet, STAY PUFT SURVIVED! We're honestly shocked. These tissue-thin plastic tablecloths are earning their keep. With all the panic and running around I didn't get as many beauty shots as I'd like, but I did take as many phone photos and videos as I could to show you the transition from daytime to night. We still have a few more things we're going to add for the big night, but it's mostly all here. So c'mon, let me give you the tour! Here's the view from the sidewalk during the day. We used yard stakes and this caution tape to mark a clear path to the front door, since our driveway is too narrow to walk when the car's there. (Which it will be.) That embarrassing dead patch in the middle of our yard should be getting a few plastic bones stuck in soon. I realized while taking these photos that we might as well make it look like an intentional dug-up grave! This walkway will also keep folks clear of the extension cords and lights that they could trip on. Tim the Thestral (aka "Ghost Horse" to fit the GB theme) looks rather magnificent even in broad daylight: Every year I have to patch up his rib cage where the old putty cracked off or through, but his actual bones and head are holding up beautifully well. If I could do it again I'd cover his whole torso with Apoxy Sculpt instead; then he'd be indestructible. Our front door: I love the way our orange door looks with a coating of slime and caution tape! There's a planter under that giant vine bush where I usually set my pumpkin, but it's so overgrown it looks like Stay Puft-kin is just floating in a sea of foliage, ha. Oooh, maybe I should add some giant googly eyes in there! Instead of a wreath I bought this plastic "No Ghost" wall decoration, then taped a strand of LED lights inside it. The plastic is so thin that it glows really well. Here we are at dusk, when all our pretty colored lights are starting to show: This is John with our Slimer photo op the first time we set it up: You can see how we did the proton pack here: it's attached to an adjustable stand, and a steel bar is holding the wand in place. I wrapped the legs of the stand in caution tape, so hopefully folks won't trip getting into position. And here's how it is now, with Stay Puft looming overhead! This is another one of our neighborhood kids, since we again drew curious neighbors while we were setting up. I will say that the pack illusion is more convincing when you put your arm *over* the metal support bar, like this: We're thinking we'll probably end being outside the whole time to help coordinate the photos - and because I'm busy making a cute little throwing game kids can play for an extra prize. (Halloween better get here soon, because I'm just going to keep adding projects to this 'til it does!) Full dark here, when the Thestral Ghost Horse & Dog House really start to shine: We hooked up a fog machine to Zuul's dog house, which of course looks amazing with the colored spots. The fog comes from inside the doghouse, and almost completely obscures the head sometimes. Again, looks super cool. (And that's a flickering green light on it - the same green lights we used to make our Floo Portal at last year's Harry Potter party.) Here's some video of all the lights in action: That last snippet was taken while we were deflating Stay Puft. Gozer vanquished, for at least another night. Oh, and obviously I can't include music for copyright reasons, but we'll be blasting the Ghostbusters soundtracks all night, and I fully expect to perform the On Our Own rap multiple times in my Tully costume. I've been waiting my whole life for this. More majestic Tim photos: I'm so happy his eyes still work! You never know what will happen when you store things in a baking hot shed all year. Stay Puft has a white spotlight AND a flicking orange flame light on him. We kept the flame effect subtle since I still want Puft to look mostly white, but it does show up more than you can tell in photos & video. If I amp up the color you can sort of see how it looks IRL: Also the proton stream on Slimer looks SO GOOD here. We added a battery spot light under the eaves to light Slimer's face, plus there's a ground spot to light the whole scene when someone stands at the pack. We're in the process of deflating Stay Puft in that picture, so here's one last look at his smirk as he shrinks back into his other dimension: I hope you enjoyed the tour! The only other thing I'm adding is a giant "No Ghost" symbol throwing game, where kids can chuck a marshmallow through the ghost's mouth to win a prize. I'll set that up to the right of the proton pack on the driveway. This is just a sheet of blue insulation foam: we projected the logo for me to trace and paint in. We'll add an easel back and probably tape it to the driveway, since it's so light. It took me 15 tries to throw a marshmallow in his mouth, sooooo yeah. We're gonna make the mouth hole bigger. The prizes will be these tiny little slime putties: ... which I'm hoping to put "Ghost Goo" stickers on. (These are not edible, so I'll be stressing that while handing them to the parents, not the kids.) I got 48 of these little jars for only $15 on Amazon! In addition to all that, there will be at least three of us around in costume. John will be his own Ghostbuster in a faux khaki jumpsuit, I'll be a gender-swapped "Louise Tully", and our friend Karen will be Dana. We've invited all our local friends to come by, too, so if we're extra lucky we may have more fun characters goofing around with us. We'll see. We've been anxiously watching the forecast here, since it looks like this rain is going to continue all week, arg. Cross your finger for us: as of today the forecast says Thursday will be clear, and I REALLY hope it stays that way. Not gonna lie, I'll be pretty devastated if we get rained out. Stay tuned for the full report! ***** UPDATE: Dang, y'all. DANG. Here's the full report, I promise you don't want to miss this! :D
Get LOTS of Ghostbusters party ideas from this amazing Ghostbusters party, perfect for a Ghostbusters birthday party or for Halloween!
Check out this fun Ghostbusters-themed house in Round Rock, Texas on display for the Halloween holiday. It's a fun treat for fans of the 80's hit movie.
What's a ghostbuster without a proton pack? This post shows you step by step how to make your own proton pack with household items!
Who you gonna call?! Illuminate your room with this paranormal Ghostbusters inspired LED light box! Whether you're a fan or just want a cool halloween decoration, this is for you! This also makes a great gift!
Create spook-tacular fun in your classroom with DIY Halloween door decorations! Get crafty with colorful paper, markers, and spooky stickers. From friendly ghosts to grinning pumpkins, let your imagination run wild.
DIY Gold Acrylic Abstract Painting: Hey Everyone! How to make by yourself an abstract painting with gold leaf? First, it’s something that beginners can do for sure. "Every artist was first an amateur." - Ralph Waldo Emerson We'll use a cling film as a basic tool, and this is the m…
Ghostbusters costume tutorial with jumpsuit and proton pack. Try this Ghostbusters costume tutorial for Halloween or your next costume party.
Halloween is The perfect time to let your creativity shine And make A splash with An unforgettable costume. And what better way to do that than with your best pals in A trio costume? Forget
Ok, so I was basically meant to be a Ghostbuster at some point in time for Halloween. This year turned out to be the year. I didn't have any problem picking up the outfit at a second hand store, but the proton pack that I found to go with it was a blow up super cheesy kind that I had no interest in. So I decided to make my own. Here's how you can make one too. Step 1: Find yourself a backpack. Any kind with black straps will do. I got this Disney Cruise Line pack at Good Will for $1.99 Step 2: Get a stitch ripper and take off the entire front of the back. All you need is the flat black base and the straps. Everything else can go. Step 3: Find a bunch of crap around your house that you don't mind destroying. It really can be anything you want. You're going to end up painting it so make sure it isn't anything you'll want to use again in the future. I used a breakfast sausage box, an old handle from my daughter's plastic sand shovel, a large plastic Lego, a Tupperware lid, the plug bottom of a burned out night light, a cable splitter, a metal hook and a handful of random vacuum attachments. Honestly, a pile of trash. Step 4: Take your trash, spray paint it all black and hot glue gun everything to the back pack. Make sure you lay it all out first and have all the pieces where you want them to go. Here's what the original looks like in case you need a point of reference: As you can see from above, you need wires. You'll need to grab some sort of used electronic for step 5. Again, I hit up the Good Will and found an old speaker box from a computer and the guy sold it to me for a dollar. Take apart the box, be careful not to cut yourself, and pull out all the old wires that look proton-packish. Go for the ones with lots of colors. Grab your hot glue gun and glue your wires wherever they fit. Sorry to be so vague, but your pile of trash is going to be different than mine, so just use your best judgement here. I used sticky label paper from OfficeMax to print out some stickers from the internet. For my ghost trapper, I used an old Kleenex box. Step 1: paint it black. Step 2: Put your stickers on. ( I found a black fan inside the previously pulled apart speaker box and glued that on for good measure.) My cord is just an old coaxial cable. Feel free to add a handle or whatever else to it. I wasn't going to make another trip to the Good Will so I just called it a day on this one. Happy Ghost Busting! Want to hear more from me? Follow me on Instagram! @thebrighterwriter
Ghost from the Ghostbusters movie
Categories Accessories / Mobile Phone Accessories / Phone Cases / iPhone Cases SKU P781276-FLC_E-IP1_04-AFc45T53 Style Flexi Cases Model Iphone 15 You're looking at the eye-catching product Ghost Classic Logo - Ghostbusters - Phone Case For belong theme iPhone Cases at Printerval The Flexi Case is designed with modern form and function in mind. The Flexi Case has an extraordinary Clear TPU shell delivering frosty transparent impact resistance while allowing the allure of the smartphone to shine through. 3D Wrap Full ink density wrap and image transfer Durability Made of impact-resistant TPU material with good shock absorption, protecting against drop and tear. Flexibility Smooth frosted finish and flexible with impact-absorbing design Vibrant colors The latest printing techniques provide bright and crisp colors matching your craziest designs Care instructions Clean with damp cotton or microfiber cloth. Add a drop of dish soap to the cloth if needed and wipe the soap down with a clean, damp cloth. Shop for attractive Ghost Classic Logo - Ghostbusters - Phone Case or see more iPhone Cases products on Printerval.com right now!
kids Ghostbusters Costume halloween Clothing halloween costume Ghostbusters cosplay halloween Ghostbusters jumpsuit XL 9M height of the girls in the photo - 169 cm Please refer to photos for details of condition. Condition: good vintage Measurements: Length: 132 cm/ 52" Inseam 64 cm/25.2" Rise: 63 cm/24.8" Sleeve from the neck: 63 cm/ 24.8" Bust: 98 cm/ 38.6 " Waist 98 cm/ 38.6" Hips: 103 cm/40.6" Size 152-157 cm note The color on the pictures may vary due to monitor settings and light reflections. Ready to ship Please do not hesitate to contact with me for any questions. Thank you for shopping today!