BULLSEYE 90 COE FUSIBLE sheet glass. "BLUE TRANSPARENTS" "Your choice of 4 colors:" 3mm thick. Used in kiln fired fused glass art, jewelry, and mosaic art. These are hand-cut in assorted sizes. Your choice of 10"×10", 5"×7", 5"x5" sheets. Price is for one sheet. Bullseye double rolled, 3mm. thick glass sheets that are great for glass fusing, fused glass jewelry, and mosaic projects. This glass is meant to be fused (melted) in a glass kiln. It is NOT colored window glass. **PLEASE NOTE- Unfired (raw) glass may not reveal (or strike to) its target color until fired. The color of the raw glass often varies greatly from the color when fused. It is also normal for the glass to have some surface imperfections from the production process. These imperfections will smooth out during the firing process. COLORS: 1408- LT. AQUAMARINE BLUE TRANSPARENT (BE001408.30) 1116- TURQUOISE BLUE TRANSPARENT (BE001116.30) 1176- PEACOCK BLUE TRANSPARENT (BE001176.30) 1108- AQUAMARINE BLUE TRANSPARENT (BE001108.30) Opacity: Transparent (able to be seen through) Sheet Size:10"×10" 5"x7" 5"×5" Thickness: 3mm (1/8") Pre-Fired Characteristics: Semi-Transparent with variegated color. Glass is textured and may have surface irregularities on one side. This is completely normal and part of the manufacturing process. Fusing Notes: Glass becomes glossy and smooth and develops to it’s true color only when fired in a kiln. PLEASE NOTE: The actual glass color may vary from the photo. A photo image of the glass is meant to reflect the general idea of its color and texture. Bullseye glass is formulated for fired color (used in the kiln). Un-fired glass color may vary and should be considered if using in Stained Glass or Mosaic applications. Some glass colors “strike” and become the true color after firing in the kiln. Some of these “striker” colors will look very different in color and opacity prior to full fusing. This is normal. Some pieces may have the Bullseye glass wavy factory edge on one side that can be up to an inch in width. Every effort is made to allow extra length to compensate for this edge. IMPORTANT: COE 90 Compatible and can/MUST be used with other 90 COE glass when firing in a kiln. COE measures how quickly a glass expands and contracts during the fusing (melting together at a high temperature) process. All glass that is fused together into a single piece must be compatible or the fused piece will have cracks. Glass sheets have very sharp edges and should be handled with great care. Glass can be cut into smaller pieces and shapes but take care to learn proper glass scoring and cutting techniques to avoid unwanted breakage during cutting. This is a good reference for basic cutting techniques. https://www.delphiglass.com/page/knowledgeBaseView?KBItemID=12 NOTE: Items can be combined for shipping. If you have any questions, please feel free to contact me prior to purchasing.
BULLSEYE 90 COE FUSIBLE sheet glass. "BLUE TRANSPARENTS" "Your choice of 4 colors:" 3mm thick. Used in kiln fired fused glass art, jewelry, and mosaic art. These are hand-cut in assorted sizes. Your choice of 10"×10", 5"×7", 5"x5" sheets. Price is for one sheet. Bullseye double rolled, 3mm. thick glass sheets that are great for glass fusing, fused glass jewelry, and mosaic projects. This glass is meant to be fused (melted) in a glass kiln. **PLEASE NOTE- Unfired (raw) glass may not reveal (or strike to) its target color until fired. The color of the raw glass often varies greatly from the color when fused. It is also normal for the glass to have some surface imperfections from the production process. These imperfections will smooth out during the firing process. COLORS: 1416-- LT. TURQUOISE BLUE TRANSPARENT (BE001416.30) 1414- LT. SKY BLUE TRANSPARENT (BE001414.30) 1164- CARIBBEAN BLUE TRANSPARENT (BE001164.30) 1246- COPPER BLUE TRANSPARENT (BE001246.30) Opacity: Transparent (able to be seen through) Sheet Size:10"×10" 5"x7" 5"×5" Thickness: 3mm (1/8") Pre-Fired Characteristics: Semi-Transparent with variegated color. Glass is textured and may have surface irregularities on one side. This is completely normal and part of the manufacturing process. Fusing Notes: Glass becomes glossy and smooth and develops to it’s true color only when fired in a kiln. PLEASE NOTE: The actual glass color may vary from the photo. A photo image of the glass is meant to reflect the general idea of its color and texture. Bullseye glass is formulated for fired color (used in the kiln). Un-fired glass color may vary and should be considered if using in Stained Glass or Mosaic applications. Some glass colors “strike” and become the true color after firing in the kiln. Some of these “striker” colors will look very different in color and opacity prior to full fusing. This is normal. Some pieces may have the Bullseye glass wavy factory edge on one side that can be up to an inch in width. Every effort is made to allow extra length to compensate for this edge. IMPORTANT: COE 90 Compatible and can/MUST be used with other 90 COE glass when firing in a kiln. COE measures how quickly a glass expands and contracts during the fusing (melting together at a high temperature) process. All glass that is fused together into a single piece must be compatible or the fused piece will have cracks. Glass sheets have very sharp edges and should be handled with great care. Glass can be cut into smaller pieces and shapes but take care to learn proper glass scoring and cutting techniques to avoid unwanted breakage during cutting. This is a good reference for basic cutting techniques. https://www.delphiglass.com/page/knowledgeBaseView?KBItemID=12 NOTE: Items can be combined for shipping. If you have any questions, please feel free to contact me prior to purchasing.
How to make fused glass jewelry using dichroic glass and a microwave kiln. Make fused glass pendants, necklaces, bracelets, earrings and rings.
Shop for Books About Jewelry Making. Learn beading, wirework, and other jewelry making techniques.
Precut Fused Glass Heron Shape COE 90 Bullseye Glass Introducing our adorable precut glass shape of a Hedgehog, a charming addition to your artistic projects! Crafted with precision using COE 90 glass, this hedgehog shape exhibits exceptional quality and versatility. Available in two sizes - 3" or 4" wide - it offers options for various creative applications. Choose from three captivating colors - clear, black, or white - to enhance your designs with a touch of whimsy. Whether you're a glass artist or a passionate hobbyist, this precut glass shape of a hedgehog will infuse your artwork with a delightful and playful charm. ♥ Heron can be cut in 2.5", 3", 4" or 5" Tall ♥ Cut out of Clear, Black, or White Opal COE 90 Oceanside Glass! Your Choice! ♥ For Glass Fusing, Glassblowing, Stained Glass and Mosaics. ♥ Waterjet cut in my home studio. Edges are ground, so no finger cuts! ♥ Add a bit of frit or paint with enamel to give it some color. ♥ Exact Cuts results in Gorgeous Finished Projects ♥ You won't get precuts like this anywhere else! ♥ Great for kids and you because you won't have to do any cutting. Our glass fusing supplies are the highest in quality and are cut individually just for you. These fusible precut stained glass shapes can be painted, sprinkled with frit and/or tack fused to your glass fusing pieces of art. We have over 200 different precut glass shapes and you are sure to find one you love for your fused glass, stained glass, blown glass or your mosaic design. Back - COE 96 Precut Animal Shapes Back - COE 90 Precut Animal Shapes Home - Fuse Muse Fused Glass
This post is a continuation of a tutorial on layering dichroic glass to make gorgeous fused glass jewelry. For the first part of the tutorial, check out this post... So, the layered dichroic tile came out of the kiln and looks wonderful. I usually let it sit for a few weeks so I can enjoy the full effect of all that sparkle :) After I've got an eyeful, it's time to think about cutting this baby down to size. I want a bunch of pendants, but the cabs you'll create by cutting the tile down work great for rings, purse hangers, mosaics,...you name it! I've begun to cut my dichro tile down a bit... I just use a regular glass cutter (my preferred cutter is my Toyo pistol grip, no oil necessary). For the first few cuts, you need to remember that: A) This tile is thick! All the layers fused together have made this tile about 1/4" thick. Thicker glass is tougher to break. B) When scoring glass, stress can build and fracture the glass at unforeseen points if you're trying to break off too little. The beginning tile was about 4" x 4." When I attempt to score and break my glass, I don't try to take off less than an inch, initially. Once your pieces start to get smaller, it's easier to cut them down into smaller and smaller pieces, to a point. When breaking the glass initially, a regular pair of running pliers doesn't really work. IF you can squeeze really hard, the tile MIGHT break. The tools I use to break the tile are: 1) A hammer - you can tap lightly on the underside (opposite side of your score) of the tile all the way along your score. Eventually, the piece should knock off where you asked it to. Sometimes, you will be surprised. This gets harder to do as the pieces get smaller. But, by that point, you can switch to your running pliers. 2) The Morton Glass Works Safety Break M-80 Tool - I was able to use this for the very first time on the thick tiles last Saturday. You have to squeeze fairly hard, but it breaks really well! The Morton website has some really great videos that make cutting glass look like a breeze. 3) Diamond Blade Saw - If you've got access to a wet tile saw with a diamond blade for cutting glass, you can make very accurate and exact cuts. If it's a ring saw, you can even cut custom shapes. This is a costly tool, but you can sometimes have the local stained glass / fusing shop cut the tile for you, or even show you how to cut it for yourself. If you're not crazy about the raw dichroic on the edges of the tile, you can nip them off with mosaic nippers. These pieces can be piled together when you put them back in the kiln and will form a puddly cabochon with lots of sparkle. Once you've finished cutting all of the pieces, it's time to put them back in the kiln. Each kiln is going to fire a bit differently. This is just a recommended firing schedule, and I'm using my "Little Miss" Caldera kiln with a 6" shelf. For a nice, clean edge that holds the shape of the cut, you'll fire to approximately 1420 degrees F and hold for 5 minutes. Since my studio is really cold right now (we're in the middle of a blizzard), I slowed the ramp up to 500 degrees per hour to 1000; then continued AFAP (as fast as possible, or 9999) to 1420 and held for 5 minutes. Follow this segment with your annealing schedule back down to room temperature. This schedule will soften the edges without globbing out of shape. For my scrap bits, I'll throw those in the kiln AFAP all the way to 1480 for 8-10 minutes. I want these pieces to be rounded and full fused. They're all really small pieces, too. So, they won't shock from the heat on the way up. Look for my last post in this series on attaching the bails with No Days BailBond...
Item specificsCondition
Fused Glass Ideas Every Glass Artists Starts With Fused glass is a beautiful and versatile medium that can be used to create a wide range of beautiful and unique pieces of art. If you are a beginner in the world of fused glass, it is best to have some projects in mind when purchasing your glass. Here are some great and
Fused Glass Jewelry Dichroic Glass Art Tutorial Pendant and Earrings. With a few simple materials and supplies you can make wearable glass art.
Fused Glass Ideas Every Glass Artists Starts With Fused glass is a beautiful and versatile medium that can be used to create a wide range of beautiful and unique pieces of art. If you are a beginner in the world of fused glass, it is best to have some projects in mind when purchasing your glass. Here are some great and
BULLSEYE 90 COE FUSIBLE sheet glass. Your choice: "PURPLE OPALS" - 3mm thick used in kiln fired fused glass art, jewelry, and mosaic art. These are hand-cut in assorted sizes. 10"x10" or 5"x7" or 5"x5". Price is for one sheet. Bullseye double rolled, 3mm. thick glass sheets that are great for glass fusing, jewelry, and mosaic projects. This glass is meant to be fused (melted) in a glass kiln. $$ Some of these glass colors have a higher price and are referred to as "gold-bearing striker glass" because of the gold mineral used to color the glass.$$ COLORS: 334- GOLD PURPLE OPAL (BE000334.30) $$ 142- NEO-LAVENDER OPAL (BE000142.30) $$ 118- PERIWINKLE OPAL (BE000118.30) 304- LAVENDER OPAL (BE000304.30) 303- DUSTY LILAC OPAL (BE000303.30) Opacity: Opaque (not able to be seen through) Sheet Size: 10"x10", 5"x7", 5"×5" Thickness: 3mm (1/8") Pre-Fired Characteristics: Semi-Transparent with variegated color. Glass is textured and may have surface irregularities on one side. This is completely normal and part of the manufacturing process. **PLEASE NOTE- Unfired (raw) glass may not reveal (or strike to) its target color until fired. The color of the raw glass often varies greatly from the color when fused. It is also normal for the glass to have some surface imperfections from the production process. These imperfections will smooth out during the firing process. Fusing Notes: Glass becomes glossy and smooth and develops to it’s true color only when fired in a kiln. Please note that the actual glass color may vary from the photo. A photo image of the glass is meant to reflect the general idea of its color and texture. Bullseye glass is formulated for fired color (used in the kiln). Un-fired glass color may vary and should be considered if using in Stained Glass or Mosaic applications. Some glass colors “strike” and become the true color after firing in the kiln. Some of these “striker” colors will look very different in color and opacity prior to full fusing. This is normal. Some pieces may have the Bullseye glass wavy factory edge on one side that can be up to an inch in width. Every effort is made to allow extra length to compensate for this edge. IMPORTANT: COE: 90 Compatible and can/MUST be used with other 90 COE glass when firing in a kiln. COE measures how quickly a glass expands and contracts during the fusing (melting together at a high temperature) process. All glass that is fused together into a single piece must be compatible or the fused piece will have cracks. Glass sheets have very sharp edges and should be handled with great care. Glass can be cut into smaller pieces and shapes but take care to learn proper glass scoring and cutting techniques to avoid unwanted breakage during cutting. This is a good reference for basic cutting techniques. https://www.delphiglass.com/page/knowledgeBaseView?KBItemID=12 NOTE: Items can be combined for shipping. If you have any questions, please feel free to contact me prior to purchasing.
Learn about using a microwave kiln. There is a lot to learn about fusing glass but you don't have to know it all to get started.
Want to add a little extra something something to your glass? Maybe some metal or perhaps bubbles? I was playing with bubbles today. Love bubbles. My favorite way to create bubbles in fused glass i…
Copper Wire and Fused Glass Butterfly: I have been taking welding and metal fabrication classes at the College of Marin. At the same time I've also been taking fused glass classes at Stained Glass of Marin. After learning a variety of techniques and working on numerous homogeneous projec…
Precut Fusible Glass Puppy Dog Shape COE 90 Bullseye Glass Introducing our adorable Precut Glass Puppy Shapes - the perfect addition to your next glass art project! Crafted with precision and care, these charming puppy silhouettes are available in your choice of brown, black, white, or clear glass, allowing you to unleash your creativity and add a touch of canine charm to your designs. Whether you're a seasoned glass artist or just starting out, our Precut Glass Puppy Shapes, standing at 2", 3", or 4" tall, offer endless possibilities for your fused glass art projects. Made from high-quality COE 90 glass, these pre-cut shapes are a versatile and delightful addition to your collection. Bring your glass art to life with these adorable puppies today! ♥ Multiple Sizes: 2" Tall, 3" Tall or 4" Tall ♥ Cut out of Clear, Black, White, or Brown Opal COE 90 Bullseye Glass! ♥ Waterjet cut in my home studio. Edges are ground, so no finger cuts! ♥ Exact Cuts results in Gorgeous Finished Projects ♥ For Glass Fusing, Glassblowing, Stained Glass, Mosaics, Enameling and making Jewelry. ♥ Great for kids and you because you won't have to do any cutting. Our glass fusing supplies are the highest in quality and are cut individually just for you. These fusible precut stained glass shapes can be painted, sprinkled with frit and/or tack fused to your glass fusing pieces of art. We have over 200 different precut glass shapes and you are sure to find one you love for your fused glass, stained glass, blown glass or your mosaic design. Back - COE 90 Precut Animal Shapes Home - Fuse Muse Fused Glass
This is some of the most interesting fused glass that I’ve seen around. I found this image (and many others) at the Objetos con Vidrio blog. Be sure to scroll down this post and dig deeper …
Necklace with fern pattern soldered with tin alloy. Colorful fused necklaces. Floral glass pendant. Forest witch necklace. Fern leaf necklace. Elven fairy necklace. Tin hand soldered item. Real tiffany technique jewelry. Material: fused glass, copper foil, tin, furniture. Size: Necklace length - 50cm Made by original idea and fully handmade. -------------------------------------------------------- *After payment, it will take approximately 1-3 business days to prepare and ship this item (excluding holidays). After the order dispatch, the estimated delivery time is 8 to 35 business days depending on your country or region. *The buyer is responsible for additional customs fees (differ from different countries) Care instructions: Pendants is made of glass, so keep it away from falling on solid floors\surfaces. don't expose to water for a long time as dry fern can be damaged. Before holidays and vacations please make a reservation in advance. Delivery is depending on work of the Post. When ordering, please take into account this fact.
BULLSEYE 90 COE FUSIBLE sheet glass. Your choice: "PINK OPALS - 3mm thick used in kiln fired fused glass art, jewelry, and mosaic art. These are hand-cut in assorted sizes. 10"x10", 5"x7", 5"x5". Price is for one sheet. Bullseye double rolled, 3mm. thick glass sheets that are great for glass fusing, jewelry, and mosaic projects. This glass is meant to be fused (melted) in a glass kiln. It is NOT colored window glass. $$$-Some of these glass colors have a higher price and are referred to as "gold-bearing striker glass" because of the gold mineral used to color the glass.$$$ COLORS: 421- PETAL PINK OPAL (BE0000421.30) 34- LIGHT PEACH CREAM OPAL (BE00034.30) 80321- PALE PINK OPAL (BE000421.30) *SPECIAL PRODUCTION* 305- SALMON PINK OPAL (BE000305.30) *STRIKER COLOR* Opacity: Opaque (not able to be seen through) Sheet Size: 10"x10", 5"x7", 5"×5" Thickness: 3mm (1/8") Pre-Fired Characteristics: Semi-Transparent with variegated color. Glass is textured and may have surface irregularities on one side. This is completely normal and part of the manufacturing process. Fusing Notes: Glass becomes glossy and smooth and develops to it’s true color only when fired in a kiln. **PLEASE NOTE- Unfired (raw) glass may not reveal (or strike to) its target color until fired. The color of the raw glass often varies greatly from the color when fused. It is also normal for the glass to have some surface imperfections from the production process. These imperfections will smooth out during the firing process. Please note that the actual glass color may vary from the photo. A photo image of the glass is meant to reflect the general idea of its color and texture. Bullseye glass is formulated for fired color (used in the kiln). Un-fired glass color may vary and should be considered if using in Stained Glass or Mosaic applications. Some glass colors “strike” and become the true color after firing in the kiln. Some of these “striker” colors will look very different in color and opacity prior to full fusing. This is normal. Some pieces may have the Bullseye glass wavy factory edge on one side that can be up to an inch in width. Every effort is made to allow extra length to compensate for this edge. IMPORTANT: COE: 90 Compatible and can/MUST be used with other 90 COE glass when firing in a kiln. COE measures how quickly a glass expands and contracts during the fusing (melting together at a high temperature) process. All glass that is fused together into a single piece must be compatible or the fused piece will have cracks. Glass sheets have very sharp edges and should be handled with great care. Glass can be cut into smaller pieces and shapes but take care to learn proper glass scoring and cutting techniques to avoid unwanted breakage during cutting. This is a good reference for basic cutting techniques. https://www.delphiglass.com/page/knowledgeBaseView?KBItemID=12 NOTE: Items can be combined for shipping. If you have any questions, please feel free to contact me prior to purchasing.
This necklace is made up of bead "chips", named so because they're flat instead of round. These chips are alternated with quartz crystal beads strung so that the colors gradually blend into one another, creating a flow with green beads on either end. Secured with a sterling silver hook clasp.
This design has been inspired by marsh flowers, so I've included Iris, Milkwort, lily pads, cow parsley and marsh bells. Each flower has been made from carefully chosen glass to reflect texture and shades, and the grasses are a mix of ring mottle and various shades of green. These truly are, ev...More This design has been inspired by marsh flowers, so I've included Iris, Milkwort, lily pads, cow parsley and marsh bells. Each flower has been made from car...More
Wissmach 96 fusing glass is compatible with all other COE 96 glass making a great addition for your inventory. We pre-cut these to size to make it easy for small projects like jewelry or creating mosaic bowls, art pieces and any other project where you want to apply several colors. Color: Steel Blue Transparent Sheets are precut and come in the following Sizes: (sizes do vary based on what we receive and can be approximately +/- 1/8inch) 1) 4x4 Inches 2) 4x8 Inches If you would like us to cut smaller pieces (eg 1x2, 2x2, 2x4) please contact us and provide the size you need, we can only cut down from the 4x4 and 4x8 sizes as we have cut full sheets already to these sizes. We appreciate you coming to our shop and hope you enjoy our products. If you have any questions, please feel free to contact us. *** While we try to accurately represent all of our products, all Photos are representative but not exact to what you will receive. This is due to photography equipment, lighting and differences in devices used to view the products. *** Visit our other Etsy shops to see more products we offer: Knot & Thread / Clothing & Bowls, Vases, Cutting Boards, Candles / Home Décor https://www.etsy.com/shop/KnotnThread DesignsbyL4YB / STL Files / Digital designs for 3D printing https://www.etsy.com/shop/DesignsbyL4YB
Cutting glass can be tricky, but knowing what exactly to do with your pliers will making breaking stained glass easier.
This beautiful fused glass donut pendant necklace was made with a mixture of lime green and white glass. The pendant hangs from a 1.5 mm black waxed faux leather necklace cord. The necklace is 16 inches long with a silver lobster claw closure and a 2-inch extension chain. The donut pendant is 34 mm wide x 8 mm thick. The cord is adjustable from 16 to 18 inches long. The necklace comes with a free gift card! Colors may vary according to monitor or device. The ornament shown in the pictures is the one available and ready to ship. I have been creating one-of-a-kind stained glass and fused glass art for over 20 years. I love stained glass and hope you enjoy my creations as much as I enjoyed making them. Check out our large assortment of ornaments and home décor at: https://coonstainedglass.etsy.com Follow me to see shop updates and my latest creations at: https://instagram/coon_stained_glass https://facebook.com/coonstainedglass
Check out these awesome glass fusing design and project ideas which you can make at home or in your own studio: jewelry, plates, swizzle sticks, garden stakes and much more!
DIY Fused Glass Earrings in Microwave Oven: Fusing glass in a kiln is a fascinating technique that enables artists to create unique and gorgeous projects. In this instructables, you will learn to make fused glass earrings at home. If you like my instructables, please vote for it in the …
Building glass cutting skills help a lot to ease the stress surrounding your hobby. But knowing some tips and tricks to get the job done also help!
Visit the post for more.
Precut Fusible Glass Shape - Whale's Tail Shaped COE 96 Oceanside Glass Dive into artistic possibilities with our precut glass whale tail shapes, a captivating addition to your glass art projects. Crafted from high-quality COE 96 glass, these meticulously designed whale tails are available in three elegant colors—black, white, and clear—allowing you to tailor your creation to match your unique vision. Whether you prefer a sleek 3" width or a bolder 4" dimension, our precut shapes streamline the creative process, enabling you to focus on bringing your imaginative marine-themed designs to life. Elevate your glass artistry with these professionally cut whale tails, making a splash in any project with their precision and style. ♥ Whale Tail can be cut in 3" or 4" Wide ♥ Cut out of White Opal COE 96 Oceanside/Wissmach Glass! Your Choice! ♥ For Glass Fusing, Glassblowing, Stained Glass and Mosaics. ♥ Waterjet cut in my home studio. Edges are ground, so no finger cuts! ♥ Add a bit of frit or paint with enamel to give it some color. ♥ Exact Cuts results in Gorgeous Finished Projects ♥ You won't get precuts like this anywhere else! ♥ Great for kids and you because you won't have to do any cutting. Our glass fusing supplies are the highest in quality and are cut individually just for you. These fusible precut stained glass shapes can be painted, sprinkled with frit and/or tack fused to your glass fusing pieces of art. We have over 200 different precut glass shapes and you are sure to find one you love for your fused glass, stained glass, blown glass or your mosaic design. Back - COE 96 Precut Animal Shapes Home - Fuse Muse Fused Glass
Handmade Stained Glass Earrings Choose your desired color of glass in variation section for each half of the hearts or keep them the same color Each pair is unique due to glass variations and handmade characteristics
This mosaic assemblage is created from fused glass in emerald, mint, and jade tones, colored mirror, and travertine. Iridescent elements add to the shimmering quality of this wall sculpture. Each piece measures 36"H, 4"W, 1.5"D. The elements are laminated to an MDF base edged in walnut. Comes ready to hang vertically or horizontally. Each piece is unique and the curves will vary.