After a recent acquisition of a flexible shaft small grinder head, decided to make it available for the lathe toolpost. Found some thick-walled Al tube and b...
In this episode I make a toolpost grinder attachment for the Holzmann 400 lathe. However it's no walk in the park as I discovered: I have a lack knowledge ab...
This project started because I wanted to make some dividing plates for the headstock indexing attachment . The ideal arrangement for this would be some sort of toolpost drill. I had read a number of...
Multifix Toolpost
I made this to allow me to machine small complex parts, like the hollow gear cover shown, for my model Myford ML7 lathe. The mill mounts on the Super7 lathe toolpost, with power supplied from a Minicraft transformer. The large knob gives fine control over 3/4" of vertical movement.
When working on the lathe, one quickly learns that mounting the various cutting tools can be time consuming. A quick change tool post (QCTP) expedites the process tremendously, however, it is then...
Plans to my projects https://madebythemetalist.etsy.comNew Video Sheet roller: https://youtu.be/DDvR79yczP8My Welding Table: https://youtu.be/un59Kn9r2VMMy S...
build a belt grinder from your own!https://www.etsy.com/it/shop/GPgraphicplans?ref=simple-shop-header-name&listing_id=1126735758
In this project, we made a small belt grinder (belt sander). For that, we used an old 1.5 hp electric motor (we recommend a 2 HP motor or higher), a 70x5 cm ...
I'm looking into building a custom 42" grinder. Has anyone here done this or know of someone who has? I need to make something better and more precise...
My diy apple grinder.It`s apple cider season and i`m crushing apples withthis diy apple grinder.Crusher is made from stainless steel plate soldered together....
Greetings all! A while ago, a grinder kit came on the market. Things happened, and it was no longer available. Then, Chris (aka blindhogg here) redrew a...
Bergstrom Quick-set toolpostSwedish-manufactured quick-set tool postSwedish lathe toolpost
Parat Quick-set Toolpost
Looking to build a belt grinder (unless I find a used one first). I have a motor (5hp 220v 3450rpm motor) & plenty of steel to do this, only thing I'm...
DIY Lathe Gouge Grinder: NOTE: This is waiting for me to take some additional/corrected photos, but it is fine for the confident DIYer. Here I'm going to show you how I converted a cheap bench grinder into one that can be used with lathe tool sharpening accessories intended…
