Item specificsCondition
DF 70-90 amp Maintenance Kit | Suzuki 17400-87812Suzuki DF 70-90 amp Maintenance Kit | Suzuki 17400-87812All-inclusive maintenance kit for Suzuki outboard models DF70A, DF80A & DF90AFor use on Suzuki outboard models DF70A, DF80A & DF90A (2009 & up)Includes oil filter, spark plugs, water pump repair kit, water pump case sleeve, impeller key, fuel filter, anodes & o-rings, propeller cotter pin, engine oil drain gasket & lower unit drain plug gasketsReplaces Suzuki 17400-87811
The SOLAS® Suzuki® Type-D 50-115hp Fixed Hub Propeller Hardware Kit sets you up to install a new boat propeller (not included). This kit is built for SOLAS dual prop and B3 installations, and front and rear propellers must both be manufactured by SOLAS. Also, they must be made of the same material: either aluminum or stainless steel but not both. Special tools may be required. Please consult OEM manual for proper installation and torque specs. Kit includes castle nut, thrust washer, spacer pins, and cotter pins. Engine fitments include: 4.25" gearcase 15-tooth spline; DF 60 4-stroke 1998-2009; DF 70 4-stroke 1998-2008; DT 75 1983-1997; DT 85 1979-2000; DT 90 1989-1997; DT 100 1989-200; DT 115 1981-2001; DT 140 1981-2001; DF 50AV 4-stroke 2015 and newer; DF 60AV 4-stroke 2015 and newer; DF 70A 4-stroke 2009 and newer; DF 80A 4-stroke 2009 and newer; DF 90 4-stroke 2001-2008; DF 90A 4-stroke 2009 and newer; DF 100 4-stroke 2009 and newer; DF 115 4-stroke 2001-2012; and DF 115A 4-stroke 2013 and newer. Kit sets you up to install a new boat propeller (not included) Built for SOLAS dual prop and B3 installations Includes a castle nut, thrust washer, 2 spacer pins, and 2 cotter pins
La VMC Double Flux TWIN’AIR DF 70 de chez AUTOGYRE viendra assainir l’air de votre maison.Idéal pour les logements de 2 à 7 pièces principales, composés d’une cuisine et jusqu’à 4 sanitaires. Offrant un confort thermique inégalable grâce à son by-pass manuel, la VMC TWIN’AIR DF 70 est composée d’un caisson monobloc autoréglable avec un caisson de répartition pour l’air insufflé. Grâce à sa filtration M5 (insufflation) elle assure la qualité de l’air intérieur. Le filtre G4 d’extraction quant à lui prévient l’encrassement de l’échangeur.Le boîtier, sans fil, de gestion des filtres vous permet de gérer le remplacement des filtres de la VMC. Un témoin lumineux vous indique quand les remplacer. Situé à l’intérieur du caisson de VMC, le by-pass permet de dévier la majorité de l’air extérieur afin qu’il soit directement insufflé dans la maison lorsqu'il est activé. Il permet alors de rafraîchir la maison les nuits d’été lorsque la température extérieure est inférieure à la température intérieure. En mi-saison ou en hiver, en position Off, il récupère la chaleur en insufflant l’air chaud dans le logement directement après avoir été filtré.
Application:Fits suzuki Outboard Motor:DF 60 - Years 1998 to 2006DF 70 - Years 1998 to 2006DT 90 - Years 1989 to 1997DT 100 - Years 1989 to 2000
Item specificsCondition
Heads may require filling with putty, spackle or caulk Material 304 Stainless Steel Length 2-1/2 Collation Type Angled Material Gauge 15 ga Nomenclature 0635153 NAIL FNSH 15GA 2-1/2IN Collation Angle 25 deg
The RBX Interchangeable Hub seats to the propeller hub cavity in order to eliminate hub chatter and vibration while preventing spinning within the propeller. It features a one-piece rubber construction with anodized aluminum splines - no plastics to deteriorate. Hubs offer 10° deflection to reduce banging when shifting gears or hitting a submerged object. All RBX hubs are reusable if the propeller is damaged. Designed for use with the following: Evinrude/Johnson/BRP 60 and 70 HP (4-Stroke) (1998 and Newer) 13 tooth spline with 4-1/4\" Gearcase, Suzuki DF 60 (4-Stroke) (1998-09), DF 70 (4-Stroke) 1998-08, DT 75-140 HP (1979-01) 13 tooth spline with 4-1/4\" Gearcase. FeaturesSeats to the propeller hub cavity to eliminate hub chatter and vibrationOffers 10 degree deflection to reduce banging when shifting gears or hitting a submerged objectOne-piece rubber construction with anodized aluminum splinesIncludes all necessary hardware and easy to use instructionsCompatibility:1998 Evinrude HP 4-Stroke with 13 Tooth Spline & 4.25 in. Gearcase1998-09 Suzuki DF 60 4-Stroke1979-01 DT 75-140 HP with 13 Tooth Spline with 4-1/4\" GearcaseSpecificationsHeight: 2.95 in.Width: 2.95 in.Length: 5.7 in.Weight: 1.58 lbs- SKU: ZX9NRTHR76208
Item specificsCondition
Each state across the country has a small town that's worth a visit. Can you guess exactly which ones?
Heads may require filling with putty, spackle or caulk Material 304 Stainless Steel Length 2 Collation Type Angled Material Gauge 15 ga Nomenclature 0635133 NAIL FINISH 15GA 2IN Collation Angle 25 deg
Suzuki DF 70/80/90/100/115/140ATX VST Fuel Pump & O-rings Replace 15200-88L00\nNew aftermarket Suzuki Marine outboard electric fuel pump. Replaces Suzuki part number 15200-88L00\n\n\nCondition:Â 100% BRAND NEW Design: Intank EFI Fuel Pump Pressure: +/- 43psi OE spec Warranty:Â LIFETIME\n
Heads may require filling with putty, spackle or caulk Collation Angle 25 deg Nomenclature 0635093 NAIL FNSH 15GA 1-1/2IN Material Gauge 15 ga Collation Type Angled Length 1-1/2 Material 304 Stainless Steel
Fuel Pump Fit for Suzuki Outboard DF 70 80 90 100 200 225 300 15200-90J00 15200-93J01 FEATURES: -Brand new fuel pump,not a remanufactured or refurbished one with wear and tear. -High quality and high cost performance,good working condition. -Made up of first-class material in order to strengthen the durability and extend the usage life. -Engineered to perform just like the original fuel pump in your vehicle or power equipment. -New Armatures are precision-manufactured and tested for long service life. -Perfect for replacing your broken one. -Safe and reliable riding experience. -Professional installation will be highly recommanded,instruction NOT included. SPECIFICATIONS: Condition: Aftermarket 100% Brand New Material: Metal & Plastic Type: Fuel Pump Overall Length: 4 3/8 in Length of Pump Body Metal Case: 2 1/2 in Pump Body Diameter: 1 1/2 in Inlet Diameter: 3/8 in Outlet Diameter: 3/8 in REPLACEMENT PART NUMBER(S): 15200-90J00 15200-90J10 15200-93J01 15200-98J00 FITMENT: Fit for Suzuki 15200-90J00 Fit for Suzuki 15200-90J10 Fit for Suzuki DF90 TL/X 2001-2008 Fit for Suzuki DF100 TL/X 2009-2012 Fit for Suzuki DF115 TL/X 2001-2002 Fit for Suzuki DF115 TL/X; WTL/X 2003-2007 Fit for Suzuki DF115 (Z)TL/X; W(Z)TL/X 2008-2012 Fit for Suzuki DF140 (Z)TL/X 2002 Fit for Suzuki DF140 (Z)TL/X; W(Z)TL/X 2003-2012 Fit for Suzuki DF70A T(H)L/X; WT(H)L/X 2010-2011 Fit for Suzuki DF70A T(H)L/X 2009 2012 2013 Fit for Suzuki DF80A T(H)L/X; WT(H)L/X 2010-2011 Fit for Suzuki DF80A T(H)L/X 2009 2012 2013 Fit for Suzuki DF90A T(H)L/X; WT(H)L/X 2010-2011 Fit for Suzuki DF90A T(H)L/X 2009 2012 2013 Fit for Suzuki 15200-93J01 Fit for Suzuki DF200 2004-2017 Fit for Suzuki DF225 2004-2017 Fit for Suzuki DF250 2004-2017 Fit for Suzuki 15200-98J00 Fit for Suzuki DF200 (Z)TL/X/XX 2017 Fit for Suzuki DF225 (Z/T)X/XX 2017 Fit for Suzuki DF250 (Z/T)X/XX 2017 Fit for Suzuki DF250 STL/X 2017 Fit for Suzuki DF300 Z/TX/XX 2007-2011 Fit for Suzuki DF250A PX/XX 2013-2017 Fit for Suzuki DF300A PX/XX 2012-2017 (Compatibility Chart is for Reference ONLY!!!) (Please Compare with Your faulty unit and the image we provided to Decide Fitment) PACKAGE INCLUDES: 1x Fuel Pump Assembly NOTE: Compatibility only for reference,please check out the size & part numbers fits your bike or not. This is an aftermarket part,not an original part.