DCC Decoder Fitting Service Our highly trained technicians will DCC decoder fit your chosen locomotive/s so that it's ready to roll straight out of the box. Your model is in safe hands with Rails. Our team are model railway enthusiasts and have many years experience. We will choose the most suitable decoder for your locomotive. Typically we use a Rails Connect decoder. These are premium decoders with a whole range of features. Should a Rails Connect decoder not be suitable we will use another more suitable brand decoder. Price Our DCC fitting service for N, OO and OO9 locomotives costs £34.95. This includes the decoder. Lead Times Our aim is to fit your decoder as promptly as possible. Usually this will take no more than 7 days. However at busy times please allow up to 14 days for fitting. Please note: Certain products are excluded from our fitting service. The fitting service selection will not be available on these products. This service is for DCC Fitting only, sound fitting is not included with this service.

T4XA 4-Function DCC Decoder - Control Only

DCC CONCEPTS ZEN BLACK DECODER SUPER THIN NANO 8 PIN WITH HARNESS 2 FUNCTION INCLUDES 1 X ABC MODULEZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.This pack includes 1x ABC board to use with automatic braking functionality.DCD-ZN8H.2 replaces the previous version – DCD-ZN8HDecoder features:– 1.1 Amps peak power– 750mA continuous power– 2 functions at 100mA each– 16mm x 9mm– 8-pin harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Brown-Out Protection on-board– Plug connection for 3-wire stay alive– Stay-Alive connection

One of my earlier entries: SMA10 – Build a 17-Function DCC Decoder for about $5 ( https://forum.mrhmag.com/post/sma10-%E2%80%93-build-a-17function-dcc-decoder-for-about-5-12197796 ) generated a considerable amount of interest regarding the possible enhancement for controlling Servomotors (Servos). This is my next version of a 17 Channel Multifunction DCC Decoder based on a low cost $2.56 Arduino Pro Mini. This version supports configuring each of the 17 function pins for On/Off (LED/TTL) Control, or Configurable Blinking Control, or Configurable Servo Control, or Configurable Pairs Blinking Control. Yes, that does mean it can support 17 servos, each with rate, start point, and end point setting via DCC CV’s, per pin , as well as new LED configurable functions. Read On. Additional doc found here: http://model-railroad-hobbyist.com/node/19775 There is another decoder version added herein. Look for "New Decoder Version to Control Lighting Groups" in Page 12 of the Comments: http://model-railroad-hobbyist.com/node/19446?page=11 The most recent Update can be found here: SMA20 New Low Cost 17 Channel DCC Decoders with PC Boards & Dual Motor, LED, & Servo Control https://forum.mrhmag.com/post/sma20-low-cost-17-channel-dcc-decoders-ver-6-01-with-soundtriggered-soundstepperdual-motorled-and-12201920 📷

6 Pin Micro DCC Loco-Decoder (with Brake Button function)36-571BachmannEZ CommandCommand and ControlScale Misc

Product information Product Title Ruby Series 2fn Standard DCC Decoder 8 Pin Manufacture Gaugemaster Sub Category Gaugemaster DCC Manufacturer Code DCC90 Our Code DCC90 For more information on this items specifications and availability, please click below. If this button does not work with your email please just email [email protected] your request.

Part of the innovative HM7000 range, the Next18-pin Bluetooth® and DCC sound decoder is ready to plug into locomotives featuring a Next18 (NEM662*) socket. The Next18 socket is found in modern Hornby locos, many other locomotives in 00, H0 and some smaller scale locomotives.The decoder is designed to supply 500mA continuous load to the main motor and a peak demand of 1,000mA, making it highly suitable for most 00 and H0 scale locos.The decoder also has sound capabilities and comes with a high quality 'sugar-cube' miniature speaker. This is quickly and easily plugged into a socket on the decoder. Download the free HM|DCC app for access to the range of free to download sound profiles.Also included are assorted speaker enclosures. When installing the speaker inside the locomotive, picking the largest enclosure which will fit inside the loco body will give the best sound reproduction from the speaker.*please note, this decoder does not meet NEM662 space requirements. Please check the locomotive has sufficient space prior to purchasing.

Kato N Scale Amtrak #301 ALC-42 w/(5) Phase VI Superliners (Lighted) - DCC Ready Loco is currently running in DC Mode - ready for drop-in decoder Video showing speed @ 58 smph If You would like the Baggage Car to complete the set - send a message and I will create a listing for you - I only have two Shipped inside Kato 10-1789 Storage Case

Accessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective Case ADS-4sx is an easy-to-use 4-way DCC accessory decoder for solenoid turnout motors with power-off memory. ADS-4sx has a CDU built-in to each output and is the most reliable and most powerful solenoid decoder available, yet it stores all its power on-board so does not drain your DCC track power!Each channel also has a digitally addressable relay which has multiple uses including frog power control. Packed with features including a CDU discharge button, Panel LED or Signal Control, Push-Button Option and Frog Power Switching. Size Width 115mm Depth 64mm Height 22mm To make sure there is a version for every need, ADS Decoders are also available in 2 and 8 way variants

DCC CONCEPTS Zen Black 21 Pin w/ 8 Pin Adaptor 6 FunctionZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.All of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.DCD-ZN218.6 replaces the previous version – DCD-Z218.Decoder features:– 1.1 Amps peak power– 750mA continuous power– 6 functions at 100mA each– 22mm x 16.5mm– 21-pin direct, 8-pin & harness– One-Step Loco Setup– Shuttle mode (requires ABC boards for this to function)– Stay-Alive connection

The Bluetooth Legacy Dongle was created to enable the HM | DCC app to control non-Bluetooth DCC decoders and work seamlessly with the Hornby Select (R8213) & Elite (R8214) controllers. The Legacy Dongle is plugged into a XpressNet socket* located on the back of Elite/Select controllers. All non-Bluetooth decoders and HM7000 decoders set to 'DCC Mode' can then be controlled via the HM | DCC app. Adapting your older DCC controllers for today has never been easier!*Other DCC controllers that feature a Xpressnet socket (RJ11/RJ12) and run Xpressnet Protocol may allow for function of the HM7040: Legacy Dongle, but are untested by Hornby and cannot be recommended.

Kato N Scale Amtrak #302 ALC-42 w/(5) Phase VI Superliners (Lighted) - DCC Ready Loco is currently running in DC Mode - ready for drop-in decoder Video showing speed @ 60 smph If You would like the Baggage Car to complete the set - send a message and I will create a listing for you - I only have two Shipped inside Kato 10-1789 Storage Case

Pre-Owned Item, in as new condition. Imperium is Dapol’s own brand of decoder. They have been designed to offer a full range of functions at a reasonable price, complementing the additional features found on Dapol’s models (such as independent lighting) as well as operating with other manufacturers models equipped with regular directional lighting or without lighting. Imperium are compatible with all models featuring a standard NEM decoder socket and operate with most motor types.Imperium decoders are compatible with NMRA and MOROP DCC standards. RailCom is not supported.SPECIFICATIONS FUNCTION RATING 100 Ma MOTOR RATING 1.0 Amp continuous, 2.0 Amp peak