Azienda leader nel settore per articoli tecnici, per la manutenzione della bicicletta, supporti, espositori da negozio. fornitore tecnico della nazionale italiana di ciclismo, team pro-tour, professional e continental

Upplandsmuseet

Västergötlands museum - Photographer Karlsson, Anders

mmmrrrr skrev: ------------------------------------------------------- > Kan hålla med Scotty10 om att det på många > sätt vore trevligare att bo i yurta i...

Velkommen! Jeg er glad for at præsentere mine malerier, som henter inspiration fra Bibelen. Mine malerier er en visuel udforskning af tro, håb og kærlighed. At arbejde med billedkunst er en konstant søgen efter temaer som optager mig. Jeg arbejder med motivets rytme og mange lag af maling. Jeg håber mine religiøse malerier kan fungere som en kilde til refleksion og inspiration. Fra det nordligste Danmark maler jeg naturen og lyset og fascineres af det blå farvespil. Himmelrummet har altid været min største kilde til undren, utallige tegninger og malerier er det blevet til igennem tiden hvor min lille interstellare astronaut flyver rundt blandt planeter og kloder. Mange hilsener fra Anne Marie.

В.Шавров История конструкций самолетов в СССР до 1938 г. РЭП (РЕП) - сокращенное название самолета Робера Эно-Пельтри - французского ученого, конструктора и летчика. Самолеты РЭП были весьма своеобразны, особенно первый тип - 1909 г., приобретенный в конце 1910 г. в одном экземпляре для Гатчинской школы.    РЭП 1909 г. Самолет представлял собой одноместный среднеплан с обратным поперечным V крыла с двигателем РЭП в 35 л.с. Шасси велосипедного типа, заднее колесо малых размеров находилось под хвостовым оперением, на концах крыла были небольшие колеса, поддерживавшие самолет на земле (с большим креном). Переднее колесо имело масляно-воздушную амортизацию в стойке. Самолет||РЕП 1909 г. Год выпуска||1909 Двигатель, марка||РЕП    Мощность||35 Длина самолета, м||8 Размах крыла, м||11 Площадь крыла, м2||20 Полетная масса, кг||450 Удельная нагрузка на крыло, кг/м2||22,5 Удельная нагрузка на мощность, кг/лс||12,9 Показать полностью J.Davilla, A.Soltan French Aircraft of the First World War (Flying Machines) Etablissements D'aviation Robert Esnault-Pelterie (R.E.P.)   Robert Esnault-Pelterie built his first powered plane in 1907. Designated the R.E.P.1, it had a 25-hp R.E.P. engine. It was followed by the similar R.E.P.2 and R.E.P.2bis with a 30-hp R.E.P. engine. In 1908 the Association des Industriels de la Locomotion Aerienne was founded. Subsequent designs included the R.E.P. Type D (60-hp R.E.P ); R.E.P. Type K (80-hp Gnome); and a two-seat floatplane. R.E.P.'s patent rights were purchased by Vickers in 1911. Показать полностью L.Opdyke French Aeroplanes Before the Great War (Schiffer) Deleted by request of (c)Schiffer Publishing REP    In 1904 Robert Esnault-Pelterie built a poor copy of the 1902 Wright glider from drawings and data published by Octave Chanute in an earlier issue of L'Aerophile; Chanute's figures and plan were in error, and Esnault-Pelterie compounded the errors. The pilot was slung underneath the rectangular wings on straps; a forward elevator and rear rudder were fitted; the wings may have warped on this first version. Control was to have been by weight-shifting in the sling.    The glider failed in May: the designer said the wing curvature was too great. In his lecture to the Aero-Club in Paris on 5 January 1905, later reprinted in L'Aerophile of June 1905, he stated that the glider had been an exact copy of the Wrights', and that therefore theirs had also failed and their reports were untrue. Esnault-Pelterie rebuilt the glider in October 1904; the span was reduced to 9.6 m. the wing curvature to 1:50, and the forward elevator removed: it is likely that this version incorporated wing-warping; but he quickly gave it up.    (Span: 10.2 m; wing curvature: 1:20 (Chanute gave this figure for the Wright glider, where it should have been 1:20 to 1:30)    He modified the glider again and flew it, still in October; this time 2 forward surfaces were set out ahead of the wings. They could move together as elevators and separately as ailerons. He outlined further tests, since attempts to fly this last version behind an automobile proved unsuccessful, but there were no further tests.    REP 1: In 1907 Esnault-Pelterie designed a new 30 hp 7-cylinder radial engine and his first powered aeroplane. Trapezoidal wings were set at an anhedral angle; the short fuselage had a triangular section and rounded top, with a long keel surface underneath; a triangular tailplane was mounted immediately aft of the trailing edges; a single wheel was fitted under the fuselage with large supporting wheels set on each side of the main wheel, and a small tailwheel; there was no vertical surface. The wings warped. It made several flights in November and December of 1907, the longest 600 m. A modification removed the 2 supporting wheels from under the fuselage and put them onto the wingtips.    (Span 9.6 m ; wing area: 18 sqm; 30 hp REP)       REP 2. In 1908 a long angular fin was added on top of the rear fuselage, and a long trailing rudder underneath; the tailplane was enlarged; hydraulic brakes were added, the first in history on an aeroplane. It was tested several times at Buc: on 8 June it managed a 1200-meter flight at a claimed speed of some 88 kmh, and a claimed altitude of some 30 m.    (Span 8.6 m; wing area: 17 sqm; weight: 350 kg; 30 hp REP)       REP 2bis: This 1909 design was similar to the REP 2, with reduced wing area (15.75 sqm). The tail fin was enlarged, the tailplane was removed, and the elevator placed further aft still. One was modified for the 1909 Reims race, with long trailing fin surface marked with the number 1. This in turn was altered again, with what became the typical REP triangular fin and rectangular rudder; a tiny semicircular rudder surface remained underneath. Показать полностью Журнал Flight Flight, January 9, 1909 THE FIRST PARIS AERONAUTICAL SALON. "R.E.P. (No. 2)."    Monoplane constructed throughout at the R.E.P. works (Billancourt, Seine). The wings extend laterally from the forward end of a longitudinal steel girder of semicircular section, and are so made and mounted that they can be warped for the purposes of steering. The girder has fixed keels above and below; the latter terminates in a rudder, and behind the rudder is the elevator. In front is the engine, driving a 4-bladed tractor screw.    A feature of the construction is the covering of the entire machine with fabric, so as to present an unbroken surface. Also the top and bottom keels give an unusually large vertical area. Under ordinary conditions, the machine is controlled by a single pivoted lever, which operates the elevator and warps the wings. The rudder is operated by a separate lever working in a notched quadrant, and a third lever is used for setting the elevator at different normal angles. Flight, February 20, 1909 M. Guffroy Flies on R.E.P. Machine. ON Tuesday, after going through a couple of days' training at M. R. Esnault Pelterie's aerodrome at Buc, M. Maurice Guffroy, despite the mist, succeeded in making several short flights on the R.E.P. 2-bis monoplane, which he has entered for the Gordon-Bennet Cup. The longest flight measured nearly 70 metres. On Wednesday he was continuing his experiments, and succeeded in making a flight of 800 metres, which was brought prematurely to an end through an extraordinary accident. He failed when turning to quite clear a bank about 12 ft. high, and as a result of the collision the machine completely turned turtle. Marvellous to relate, as the monoplane was travelling at a speed of 80 kiloms. an hour, M. Guffroy escaped unhurt, and the only damage to the machine was a broken propeller. Flight, March 27, 1909 FLYERS AT OLYMPIA. Rep (BESSLER-WAECHTER).    The Rep monoplane exhibited by Messrs. Bessler-Waechter, who are the British manufacturers for M. Esnault-Pelterie, is in the main a copy of that No. 2 bis, which was exhibited at Paris and with which M. Pelterie has himself made his most successful experiments. Except in slight details which would pass unnoticed by those not closely acquainted with the precise lines of the earlier model, the flyer on view at Olympia is quite unaltered, but close inspection shows that the tail end of the body of the machine has been slightly modified in its lines and now is more rounded in its section than formerly. The rudder, too, is a little smaller, but the system of control remains unchanged. Ascending and descending is accomplished mainly by the use of the stern elevator, steering is managed by means of the rear rudder, and lateral stability is obtained by warping the main wings. These operations are performed by levers, one of which besides warping the wings also flexes the elevator within certain limits; this particular lever is universally jointed to move either sideways or to and fro. There are two other levers which can be used to set the rudder and to set the elevator in any given position. When ascending it is the rear edge of the stern elevator which is tilted; in biplanes which have an elevator in front of the machine it is of course the front edge which is tilted for this purpose. When proceeding at any given speed, an increase of speed of the engine also causes ascent with any given setting of the elevator.    A feature of the general scheme of the R.E.P. flyer is the mounting of the machine on two wheels, with guide wheels on the tips of the main wings, so that the pilot can learn to partially control his machine without leaving the ground. Why M. Esnault-Pelterie adopted the monoplane principle he explained in a lecture before the members of the Aero Club some weeks ago. It was, as our readers will remember, mainly because he found that the wires necessary in the construction of a biplane offered tremendous resistance, far greater in fact than would be imagined from their small diameter. Показать полностью Описание:Description: В.Шавров История конструкций самолетов в СССР до 1938 г. J.Davilla, A.Soltan French Aircraft of the First World War (Flying Machines) L.Opdyke French Aeroplanes Before the Great War (Schiffer) Журнал Flight

Navyblå 16" cykel fra Stoy. Cykelen har et robust stålstel. – Gummihjuler.– Reflektorer for sigtbarhed.– Klokke på styret.– Begrænset rotation på styret forhindrer det i at dreje for hurtigt.– Polstret sæde, justerbart mellem 59,5- 62,5 cm i højden.– Håndbremse og fodbremse.– Træningshjul er nemme at fjerne, når de er klar.– Let at samle.

REP CHI brand apparel and things made from recycled things. Also art, non-touristy Chicago gifts, and other stuff you probably need.

Reparation af cykler.

Success is earned rep by rep #gymgirl #gymmotivation

Liste Taxonomique aka Taxonomic List Home Page Keywords, mots cléfs: timbre timbres stamp stamps philatélie philately taxonomie taxonomy plante plantes plant plants fleur fleurs flower flowers aildoux flore du Québec flora of Quebec

Rep Fitness Ares 2.0 preview. The Rep Ares 2.0 is a fully integrated functional trainer and lat pulldown/low row that attaches right onto your Rep racks.

Welcome to my J Bloom website!! I would love to share this amazing opportunity with you!!