CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 2 v6.0 Final Exam Answers 2017 – Routing & Switching Essentials Read Chapter wise CCNA 2 Exam Answers (v5.1 + v6.0) 1. Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed, after a packet leaves H1, how many times is the L2 header rewritten in the […]
Solution of CCNA 1 Routing and Switching: Introduction to Networks 1. Refer to the exhibit. The network administrator enters these commands into the R1 router: R1# copy running-config tftp Address or name of remote host [ ]? When the router prompts for an address or remote host name, what IP address should the administrator enter at the prompt? 192.168.9.254 192.168.10.1 192.168.10.2 192.168.11.254 192.168.11.252 2. Which three statements characterize the transport layer protocols? (Choose three.) TCP uses port numbers to provide reliable transportation of IP packets. TCP and UDP port numbers are used by application layer protocols. TCP uses windowing and sequencing to provide reliable transfer of data. TCP is a connection-oriented protocol. UDP is a connectionless protocol. UDP uses windowing and acknowledgments for reliable transfer of data. 3. What is the purpose of ICMP messages? to inform routers about network topology changes to ensure the delivery of an IP packet to monitor the process of a domain name to IP address resolution to provide feedback of IP packet transmissions 4. A technician uses the ping 127.0.0.1 command. What is the technician testing? connectivity between a PC and the default gateway connectivity between two adjacent Cisco devices physical connectivity of a particular PC and the network the TCP/IP stack on a network host connectivity between two PCs on the same network 5. What will a Layer 2 switch do when the destination MAC address of a received frame is not in the MAC table? It notifies the sending host that the frame cannot be delivered. It initiates an ARP request. It forwards the frame out of all ports except for the port at which the frame was received. It broadcasts the frame out of all ports on the switch. 6. What is a characteristic of the LLC sublayer? It places information in the frame that allows multiple Layer 3 protocols to use the same network interface and media. It provides delimitation of data according to the physical signaling requirements of the medium. It defines software processes that provide services to the physical layer. It provides the logical addressing required that identifies the device. 7. On which switch interface would an administrator configure an IP address so that the switch can be managed remotely? VLAN 1 console 0 vty 0 FastEthernet0/1 8. A network engineer is measuring the transfer of bits across the company backbone for a mission critical database application. The engineer notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput? (Choose three.) the reliability of the gigabit Ethernet infrastructure of the backbone the amount of traffic that is currently crossing the network the type of traffic that is crossing the network the sophistication of the encapsulation method applied to the data the bandwidth of the WAN connection to the Internet the latency that is created by the number of network devices that the data is crossing 9. When applied to a router, which command would help mitigate brute-force password attacks against the router? service password-encryption login block-for 60 attempts 5 within 60 banner motd $Max failed logins = 5$ exec-timeout 30 10. Which two statements correctly describe a router memory type and its contents? (Choose two.) ROM is nonvolatile and contains basic diagnostic software. FLASH is nonvolatile and contains a limited portion of the IOS. ROM is nonvolatile and stores the running IOS. RAM is volatile and stores the IP routing table. NVRAM is nonvolatile and stores other system files. 11. Which two components are necessary for a wireless client to be installed on a WLAN? (Choose two.) custom adapter wireless bridge media wireless NIC crossover cable wireless client software 12. Launch PT - Hide and Save PT Open the PT activity. Perform the tasks in the activity instructions and then fill in the blank. The Server0 message is . ” winner ” 13. A host is accessing a Web server on a remote network. Which three functions are performed by intermediary network devices during this conversation? (Choose three.) applying security settings to control the flow of data notifying other devices when errors occur regenerating data signals acting as a client or a server serving as the source or destination of the messages providing a channel over which messages travel 14. 15. 16. Which address on a PC does not change, even if the PC is moved to a different network? IP address logical address MAC address default gateway address 17. What will happen if the default gateway address is incorrectly configured on a host? A ping from the host to 127.0.0.1 would not be successful. The host will have to use ARP to determine the correct address of the default gateway. The host cannot communicate with other hosts in the local network. The host cannot communicate with hosts in other networks. The switch will not forward packets initiated by the host. 18. A host PC has just booted and is attempting to lease an address through DHCP. Which two messages will the client typically broadcast on the network? (Choose two.) DHCPREQUEST DHCPOFFER DHCPDISCOVER DHCPNACK DHCPACK 19 Refer to the exhibit. An administrator wants to change the name of a brand new switch, using the hostname command as shown. What prompt will display after the command is issued? Switch# My(config)# My Switch(config)# Switch(config)# MySwitch(config)# 20. After making configuration changes, a network administrator issues a copy running-config startup-config command in a Cisco switch. What is the result of issuing this command? The configuration changes will be removed and the original configuration will be restored. The new configuration will be stored in flash memory. The current IOS file will be replaced with the newly configured file. The new configuration will be loaded if the switch is restarted. 21. Refer to the exhibit.A TCP segment from a server has been captured by Wireshark, which is running on a host. What acknowledgement number will the host return for the TCP segment that has been received? 2921 250 2 306 21 22. Which technology provides a solution to IPv4 address depletion by allowing multiple devices to share one public IP address? ARP DNS SMB DHCP HTTP NAT 23. What is the purpose of the routing process? to encapsulate data that is used to communicate across a network to select the paths that are used to direct traffic to destination networks to convert a URL name into an IP address to provide secure Internet file transfer to forward traffic on the basis of MAC addresses 24. Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices. If QoS is implemented on this network, what will be the priorities from highest to lowest of the different data types? audio conference, financial transactions, web page financial transactions, audio conference, web page audio conference, web page, financial transactions financial transactions, web page, audio conference 25. A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used? cell modem dial-up cable modem satellite DSL 26. Which connection provides a secure CLI session with encryption to a Cisco switch? a Telnet connection an SSH connection a console connection an AUX connection 27. What is the purpose of the network security accounting function? to provide challenge and response questions to require users to prove who they are to determine which resources a user can access to keep track of the actions of a user 28 Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator uses Telnet to connect to the switch, which password is needed to access user EXEC mode? lineconin linevtyin letmein secretin 29. Which publicly available resources describe protocols, processes, and technologies for the Internet but do not give implementation details? IEEE standards Request for Comments IRTF research papers protocol models 30. A PC is configured to obtain an IP address automatically from network 192.168.1.0/24. The network administrator issues the arp –a command and notices an entry of 192.168.1.255 ff-ff-ff-ff-ff-ff. Which statement describes this entry? This entry refers to the PC itself. This entry maps to the default gateway. This is a static map entry. This is a dynamic map entry. 31. Which subnet would include the address 192.168.1.96 as a usable host address? 192.168.1.64/26 192.168.1.32/28 192.168.1.32/27 192.168.1.64/29 32. A particular website does not appear to be responding on a Windows 7 computer. What command could the technician use to show any cached DNS entries for this web page? ipconfig /all ipconfig /displaydns arp -a nslookup 33. Which type of wireless security generates dynamic encryption keys each time a client associates with an AP? WPA PSK WEP EAP 34. A frame is transmitted from one networking device to another. Why does the receiving device check the FCS field in the frame? to compare the interface media type between the sending and receiving ends to determine the physical address of the sending device to verify that the frame destination matches the MAC address of the receiving device to check the frame for possible transmission errors to verify the network layer protocol information 35 Refer to the exhibit. Which IP addressing scheme should be changed? Site 1 Site 3 Site 4 Site 2 36. What is the effect of configuring the ipv6 unicast-routing command on a router? to assign the router to the all-nodes multicast group to permit only unicast packets on the router to enable the router as an IPv6 router to prevent the router from joining the all-routers multicast group 37. Which three IP addresses are private ? (Choose three.) 10.1.1.1 172.16.4.4 224.6.6.6 192.168.5.5 172.32.5.2 192.167.10.10 38 Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of the default gateway address? It is the IP address of the Router1 interface that connects the company to the Internet. It is the IP address of the ISP network device located in the cloud. It is the IP address of Switch1 that connects PC1 to other devices on the same LAN. It is the IP address of the Router1 interface that connects the PC1 LAN to Router1. 39. During normal operation, from which location do most Cisco switches and routers run the IOS? flash RAM NVRAM disk drive 40. What is an important function of the physical layer of the OSI model? It encodes frames into electrical, optical, or radio wave signals. It accepts frames from the physical media. It encapsulates upper layer data into frames. It defines the media access method performed by the hardware interface. 41. Which procedure is used to reduce the effect of crosstalk in copper cables? wrapping the bundle of wires with metallic shielding avoiding sharp bends during installation requiring proper grounding connections designing a cable infrastructure to avoid crosstalk interference twisting opposing circuit wire pairs together 42. What are the three primary functions provided by Layer 2 data encapsulation? (Choose three.) placement and removal of frames from the media detection of errors through CRC calculations conversion of bits into data signals delimiting groups of bits into frames data link layer addressing error correction through a collision detection method session control using port numbers 43. What method is used to manage contention-based access on a wireless network? token passing CSMA/CD CSMA/CA priority ordering 44. What happens when part of an Internet radio transmission is not delivered to the destination? A delivery failure message is sent to the source host. The part of the radio transmission that was lost is re-sent. The transmission continues without the missing portion. The entire transmission is re-sent. 45. What is the auto-MDIX feature on a switch? the automatic configuration of full-duplex operation over a single Ethernet copper or optical cable the automatic configuration of an interface for a straight-through or a crossover Ethernet cable connection the ability to turn a switch interface on or off accordingly if an active connection is detected the automatic configuration of an interface for 10/100/1000 Mb/s operation 46. Which function is provided by TCP? detection of missing packets communication session control path determination for data packets data encapsulation 47. How does a Layer 3 switch differ from a Layer 2 switch? A Layer 3 switch learns the MAC addresses that are associated with each of its ports. However, a Layer 2 switch does not. A Layer 3 switch maintains an IP address table instead of a MAC address table. A Layer 3 switch supports VLANs, but a Layer 2 switch does not. An IP address can be assigned to a physical port of a Layer 3 switch. However, this is not supported in Layer 2 switches. 48. Which two notations are useable nibble boundaries when subnetting in IPv6? (Choose two.) /68 /62 /66 /64 /70 49. What is the purpose of having a converged network? to reduce the cost of deploying and maintaining the communication infrastructure to provide high speed connectivity to all end devices to make sure that all types of data packets will be treated equally to achieve fault tolerance and high availability of data network infrastructure devices 50. Refer to the exhibit. A ping to PC3 is issued from PC0, PC1, and PC2 in this exact order. Which MAC addresses will be contained in the S1 MAC address table that is associated with the Fa0/1 port? just the PC0 MAC address PC0, PC1, and PC2 MAC addresses just the PC2 MAC address just PC0 and PC1 MAC addresses just the PC1 MAC address 51. Which field in an IPv4 packet header will typically stay the same during its transmission? Packet Length Destination Address Flag Time-to-Live 52. What two preconfigured settings that affect security are found on most new wireless routers? (Choose two.) MAC filtering enabled default administrator password WEP encryption enabled PSK authentication required broadcast SSID 53. Which parameter does the router use to choose the path to the destination when there are multiple routes available? the higher metric value that is associated with the destination network the lower metric value that is associated with the destination network the higher gateway IP address to get to the destination network the lower gateway IP address to get to the destination network 54. Refer to the exhibit. What is the significance of the asterisk (*) in the exhibited output? An asterisk designates that the file system has at least one file that uses that file system. The asterisk designates which file system is the default file system. An asterisk indicates that the file system is bootable. The asterisk shows which file system was used to boot the system. 55. 56. Fill in the blank. During data communications, a host may need to send a single message to a specific group of destination hosts simultaneously. This message is in the form of a ” multicast ” message. 57. An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the ping command. What is the purpose of using these keystrokes? to interrupt the ping process to restart the ping process to allow the user to complete the command to exit to a different configuration mode 58. Refer to the exhibit. Which area would most likely be an extranet for the company network that is shown? area A area D area C area B 59. 60. 61. In which default order will a router search for startup configuration information? setup mode, NVRAM, TFTP NVRAM, TFTP, setup mode NVRAM, RAM, TFTP TFTP, ROM, NVRAM flash, ROM, setup mode 62. Launch PT - Hide and Save PT Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. Which IPv6 address is assigned to the Serial0/0/0 interface on RT2? 2001:db8:abc:1::1 2001:db8:abc:5::1 2001:db8:abc:5::2 2001:db8:abc:10::15 63. What is contained in the trailer of a data-link frame? physical address data error detection* logical address 64. DOWNLOAD FULL ANSWER as PNG file: CLICK HERE TO DOWNLOAD
CCNA 2 v7 Final Exam, Switching, Routing, and Wireless Essentials (Version 7.00) - SRWE Final Exam Answers Full 100% scored passed new questions download pdf
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2017 (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service delivered to existing users a network that supports a mechanism for managing congestion and ensuring reliable delivery of content to all users a network that recovers quickly when a failure occurs and depends on redundancy to limit the impact of a failure* 2. Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices. If QoS is implemented on this network, what will be the priorities from highest to lowest of the different data types? financial transactions, audio conference, web page audio conference, financial transactions, web page* audio conference, web page, financial transactions financial transactions, web page, audio conference http://www.configrouter.com/ccna-1-final-exam-answers-9293/ http://bit.ly/2NQzM1f https://ccna-security.tumblr.com/post/175939257313/ccna-1-final-exam-answers-2017-v51-v60 http://bit.ly/2LejZun https://trello.com/c/jHn3tWIw/1-ccna-1-final-exam-answers http://bit.ly/2JrUwsC https://plus.google.com/u/0/+ObulReddyCBSE/posts/RGP4ojAe2aU http://bit.ly/2zK9XNi https://drive.google.com/drive/u/0/folders/1cDLLjEC6I_CC6-pXalOPsSrpIlWhyauo http://bit.ly/2KXd0GV https://docs.google.com/presentation/d/e/2PACX-1vQ6iYlFu3n4LUIqTFkKz63oJjIjUbXvyZpdhBlmcgH2FnS17QRPdNGdt6EknVAARiq1O6QvGMsqfySq/pub?start=false&loop=false&delayms=3000 http://bit.ly/2NRN0dO https://docs.google.com/document/d/e/2PACX-1vTzBnXisvtOQmAISDxdlDP955gR1K0NA5ay51mP4GB91tBDVTZ3LFh9EXMSGNLXgwfIXugZ2dfHvVuV/pub http://bit.ly/2LiZZqR https://sites.google.com/site/aplustopperguide/ccna-1-final-exam-answers-2017-v5-1-v6-0 http://bit.ly/2NjWbCY http://aplustoppernotes.blogspot.com/2018/07/ccna-1-final-exam-answers-2017-v51-v60.html http://bit.ly/2Nkk7WR https://aplustoppernotes.wordpress.com/2018/07/16/ccna-1-final-exam-answers-2017-v5-1-v6-0/ http://bit.ly/2mmz5QE https://wp.me/p9YiSz-6J
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 2 v6.0 Final Exam Answers 2017 – Routing & Switching Essentials Read Chapter wise CCNA 2 Exam Answers (v5.1 + v6.0) 1. Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed, after a packet leaves H1, how many times is the L2 header rewritten in the […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 4 Final Exam Answers 2019 (v5.0.3+v6.0) Read Chapter wise CCNA 4 Exam Answers (v5.1 + v6.0) CCNA 4 Final Exam Answers 2020 1. Which statement best describes a WAN? A WAN interconnects LANs over long distances.* A WAN is a public utility that enables access to the Internet. WAN is another name for the Internet. A […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 3 Final (v5.0.3+v6.0) Exam Answers 2020 Read Chapter wise CCNA 3 Exam Answers (v5.1 + v6.0) CCNA 3 Final Exam Answers 2020 1. Which routing protocol is able to scale for large networks and utilizes non-backbone areas for expansion? EIGRP BGP OSPF* RIPv2 2. In the Cisco hierarchical design model, which layer is more likely to […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Introduction to Networks (Version 7.00) - Modules 1 - 3 Basic Network Connectivity and Communications Exam Answers Full Scored 100% 2020-2021 (ITN) v7.0
CCNA 1 Introduction to Networks (Version 7.00) - Modules 1 - 3 Basic Network Connectivity and Communications Exam Answers Full Scored 100% 2020-2021 (ITN) v7.0
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
CCNA 1 Final Exam Answers 2020 (v5.1 + v6.0) Read Chapter wise CCNA 1 Exam Answers (v5.1 + v6.0) 1. What is a characteristic of a fault tolerant network? a network that protects confidential information from unauthorized access a network that can expand quickly to support new users and applications without impacting the performance of the service […]
