The beautiful new Delightfully Detailed laser cut specialty paper debuting June 1st can use altered in so many ways but there are a few challenges to working with it. I’ll share some tips for using it, for altering it and some great ideas in this RemARKably created one take video. Remember that you can Request […]
I just received Stampin' Up's new Shimmer Detailed Laser-Cut Paper, and I couldn't wait to put it to use. I ended up with a "two-for-one;" two cards from one section of
Handmade birthday card created by UK Stampin Up demonstrator Sraah Phelan from Sarahs Stampin Retreat using the Forever Gold paper from Stampin Up
Make easy elegant cards with the Delightfully Detailed Laser-Cut Specialty Paper that has both Whisper White and Very Vanilla sides.
I have seen many posts using the floral pattern of the Delightfully Detailed Laser Cut Designer Series Paper. So I thought I would create simple note cards using one of the border cuts. The first note card is a A2 card base in Grapefruit Grove. I glued the border (Very Vanilla side up) to the card base and then added retired Perfect Plum enamel dots. Can you see the stamped small flower in the bottom… Continue reading
Welcome to the Pals July 2018 Blog Hop. We’re having a “Pattern Party”. This month our creations will feature our favorite Designer Series Papers and coordinating embellishments from the new annua
Another project from my brayering session. For this one, I masked a panel and brayered in Pacific Point, graduating it towards the top so it faded out. On top of this I sprinkled some water and allowed it to dry, which gives a lovely effect. To create a focal point, I trimed a section from the Delicately Detailed Laser-cut DSP and sponged in different colours. It’s not easy to stick down but I used some tiny dabs of Tombow which did the trick. Some Soft Sea Foam sequins finish it off - I'm in love with these!
You can make these Perennial Essence DSP and the Bird Ballad Laser- Cut Cards & Tin with the measurements & supply list here.
Stampin' Up Demonstrator Sara Sayers KISS Kreative - Showing you how to make some easy thank you cards using the NEW Dandy Laser cut papers
Hi Stampers! That was a long blog title post that didn't give you a lot of information did it? Awhile back, I purchased the "Shimmer Detailed Laser Cut Specialty Paper" to eventually give it a try. I then forgot about it until last week when I came across it while looking for something else. Does that ever happen to you? I love when it's a happy accident and steers me in a fun way of creativity! This paper is amazing. The shimmery side is a soft off-white and the detail is intricate and amazing. It's paper that has various designs cut into it with a laser. You get six sheets, three of two different styles, and the reverse side is a plain white which can be used as is or even sponged to any color of your choice. I decided to make some cards using the card sized pieces. There are 5 in all and with the pack of three pages, I got 15 cards when I was done. Want to see?!! This is where I started. I looked for Designer Series Paper to put behind the laser cut paper. It's a little tricky to find paper that doesn't "fight" with the laser cut design. Here are pictures of the finished cards: And now some details on each card: The paper behind the laser cut design in this card is from the "Finely Woven" DSP pack. I also used some Designer Series Paper In-Color paper for the gingham check background to the sentiment. The Happy Birthday Sentiment is from the "I Say Hello" stamp set, located in the Annual Catalog, pg 110. This card features the "Follow Your Art" DSP, the leaf and sprig punch and the "Accented Blooms" stamp set and coordinating Tailored Tag punch. This card uses paper from the Bird Ballad DSP pack and a sentiment from the "Path of Petals" stamp set which is part of the Pressed Petals Suite. This card also uses products from the Pressed Petals Suite including Pressed Petals DSP for my floral background and the "Path of Petals" stamp set. My small yellow flowers are made with using the Small bloom punch and stamp set from the Sale-A-Bration offering. Finally, my bird/branch laser cut paper is backed with a piece from the "Garden Lane" DSP pack. I used a retired stamp, ribbon and button for this card as well. Here's a picture of the Shimmer Detailed Laser-Cut paper. Remember, you get three sheets of each design in the pack! I have several more pieces of the laser cut paper to play with but this was a fun start. Because this paper is fairly delicate, I hand cut it out with my long blade Stampin'Up! scissors and then trimmed a little if needed with my paper trimmer. I did all three sheets at the same time as the paper is pretty thin. It's not as tedious as it may sound, you just have to take some care to not force anything and rip it accidentally. This was a fun way to make 15 cards in little time and the laser cut paper is so gorgeous. I've listed most of my supplies below and a click on any of them will take you to the store where you can get more information or order. This paper is in the Annual Catalog and should be available until May 31st or until supplies run out. I'm seeing a few more samples on Pinterest with this paper so don't wait until it goes viral and is gone! Have a creative and wonderful Wednesday! Sarah
Isn't this pretty? And it seriously was a 5-minute card, because the main background piece is already laser-cut and ready to use. I just cut the design I wanted from the 12x12-sized sheet, adhered it with Liquid Multipurpose Glue, and added my sentiment with some vellum and textural layers. I LOOOOOOVE monochromatic cards and especially blue of any shade with white. I can't wait to play some more. Did you know the sheets are white on one side and vanilla on the other? So cool! Ready to recreate this card at home? Here's what you'll need: Click any link to...
Delightful Detail Suite…. Stampin’ Up! have made a winner here!….At first I wasn’t sure what to think of this suite. I loved the beautiful detailed lace like laser cut papers – Delightfully Detailed Laser-Cut Specialty Paper 146907 Delicately detailed laser-cut sheets. Vanilla on one side, white on the other side. Can easily be cut apart […]
Hi Stampers! That was a long blog title post that didn't give you a lot of information did it? Awhile back, I purchased the "Shimmer Detailed Laser Cut Specialty Paper" to eventually give it a try. I then forgot about it until last week when I came across it while looking for something else. Does that ever happen to you? I love when it's a happy accident and steers me in a fun way of creativity! This paper is amazing. The shimmery side is a soft off-white and the detail is intricate and amazing. It's paper that has various designs cut into it with a laser. You get six sheets, three of two different styles, and the reverse side is a plain white which can be used as is or even sponged to any color of your choice. I decided to make some cards using the card sized pieces. There are 5 in all and with the pack of three pages, I got 15 cards when I was done. Want to see?!! This is where I started. I looked for Designer Series Paper to put behind the laser cut paper. It's a little tricky to find paper that doesn't "fight" with the laser cut design. Here are pictures of the finished cards: And now some details on each card: The paper behind the laser cut design in this card is from the "Finely Woven" DSP pack. I also used some Designer Series Paper In-Color paper for the gingham check background to the sentiment. The Happy Birthday Sentiment is from the "I Say Hello" stamp set, located in the Annual Catalog, pg 110. This card features the "Follow Your Art" DSP, the leaf and sprig punch and the "Accented Blooms" stamp set and coordinating Tailored Tag punch. This card uses paper from the Bird Ballad DSP pack and a sentiment from the "Path of Petals" stamp set which is part of the Pressed Petals Suite. This card also uses products from the Pressed Petals Suite including Pressed Petals DSP for my floral background and the "Path of Petals" stamp set. My small yellow flowers are made with using the Small bloom punch and stamp set from the Sale-A-Bration offering. Finally, my bird/branch laser cut paper is backed with a piece from the "Garden Lane" DSP pack. I used a retired stamp, ribbon and button for this card as well. Here's a picture of the Shimmer Detailed Laser-Cut paper. Remember, you get three sheets of each design in the pack! I have several more pieces of the laser cut paper to play with but this was a fun start. Because this paper is fairly delicate, I hand cut it out with my long blade Stampin'Up! scissors and then trimmed a little if needed with my paper trimmer. I did all three sheets at the same time as the paper is pretty thin. It's not as tedious as it may sound, you just have to take some care to not force anything and rip it accidentally. This was a fun way to make 15 cards in little time and the laser cut paper is so gorgeous. I've listed most of my supplies below and a click on any of them will take you to the store where you can get more information or order. This paper is in the Annual Catalog and should be available until May 31st or until supplies run out. I'm seeing a few more samples on Pinterest with this paper so don't wait until it goes viral and is gone! Have a creative and wonderful Wednesday! Sarah
I love heat embossing, there’s something quite magical about stamping an image, sprinkling it with powder and watching it morph into a shiny, raised design simply by the application of heat. But while the theory is simple, results can vary and I’ve found that it’s definitely worth taking a little time if you want to […]
Handmade birthday card created by UK Stampin Up demonstrator Sraah Phelan from Sarahs Stampin Retreat using the Forever Gold paper from Stampin Up
For the card I made today, I have used one of the Forever Gold Laser-cut Specialty Designer Series Paper 152493 panels and coloured it.
See a card making video tutorial with tips for using the Bird Ballad Laser-Cut cards from Stampin' Up! with the Mosaic Mood designer paper by Patty Bennett
This vivid just for you card uses the Delightfully Detailed Laser-Cut Specialty Paper and Stampin' Blends with an adapted black magic technique.
This laser-cut (lace look) DSP is just gorgeous!! Check out this simple card! I think it turned out great! Where did this punch come from? It is the NEW Story Label Punch in the upcoming Annual Catalog! OR maybe you purchased this punch in March! It was one of the Sale-a-bration Additions that you could get in March only. This Beautifully Detailed Laser-Cut Specialty DSP is on the RETIRING list. Check it out- there are several different patterns of it. It is Petal Pink on one side & White on the other side. It in the Occasions Catalog on page 48. stamp set: 'Humming Along'- RETIRING card stock: Petal Pink- Whisper White- designer paper: Beautifully Detailed Laser-Cut Specialty DSP- RETIRING ink: Black Memenot other: Story Label Punch, Dimensionals, Faceted Dots- RETIRING ++++++++ Yesterday I enjoyed a busy day with the 3 little ones. We were outside some & Deke picked up meat at the locker, so we put it away too. We made Mother's Day gifts for Manda & Sarah....with paint, punches, card stock & dimensionals. And I'll share a photo of their craft creations in the next day or two. Grandma's Hair Hut was open too......Trey & Drake both got their hair cut. Deke went with Nathan, Sarah & their kids- racing at Columbus Junction. He got 4th in his heat, started 12th in the main & was doing great, but pulled in as his motor was over heating. I went to Drake & Brody's first baseball game with the Seeley family & aunt Kathy was there too. They did a great job! It was fun to watch them. I then came home & burnt the midnight oil stamping! This morning- Deke is off early to chore, I'm gonna work on things around the house & we will then go to town to watch all 4 boys play soccer. Tonight we have Mother's Day supper with Deke's family- so I'll have food to make this afternoon for that. I hope you have a SENSATIONAL Saturday!! Happy Stamping! Hugs- SUSIE
This pretty floral thank you card pulls together in minutes using one of the card front sized designs from the Stampin' Up! Delightfully Detailed Laser-Cut Specialty Designer Series Paper. I
Jo's Stamping Spot - ESAD 2018 Annual Catalogue Launch Blog Hop using 2018-2020 In Colours, Delightfully Detailed DSP by Stampin' Up! Joanne Stubbings, Blueberry Bushel, Lovely Lipstick, Grapefruit Grove, Call Me Clover, Pineapple Punch
My tutorial today is for a Forever Gold thanks card. This time I'm using separate leaves from the Forever Gold Laser-cut Specialty Paper.
Honouring my team achievers this month was easy with the Delightfully Detailed Notecards and Envelopes and matching laser-cut paper. Some copper elements and a die-cut sprig from Botanical Tags provide the finishing touches. Scroll down for more designs...
Forever Gold Birthday Card created by UK Stampin Up demonstrator Sarah Phelan from Sarahs Stampin Retreat using Forever Gold Laser-Cut paper from Stampin Up
Bruno has made some incredible cards with this suite of products and this one is no exception! he has done some amazing punching with the Tailored Tag Punch with the Dandy Garden Designer Series Paper and also some cardstock. He then overlay that with some of our amazing cardstock vellum and the Dandy Laser-Cut Paper on top of that. The addition of the Ladybug Trinkets is a winner! They look so adorable on that laser cut paper. In true Bruno style, each layer is on dimensionals of course!! Even the vellum layer. He hid some of the foam adhesive strips behind the laser cut paper... Amazing right? We have a MEGA bundle available to give you lots of ideas for this amazing suite of products. CHECK OUT THE MEGA BUNDLE OR PURCHASE IT HERE If you would like to purchase any of the products to make this project you can click below Dandy Garden Suite Collection (English) [155981] $253.00 Tailored Tag Punch [145667] $31.00 White Vellum A4 Card Stock [106584] $17.50 Foam Adhesive Strips [141825] $14.00 Add All to Cart Check out our AMAZING All Star Tutorial Bundles 12 amazing tutorials to inspire you each month $20 Click Below to see the Sneak Peeks or FREE with ANY ONLINE ORDER
Hello, Crafters. I hope you’ve had a great weekend, and have recharged your batteries ready to handle this coming week in your stride! I know it’s Monday today, and I shouldn’t be here, but I do miss not blogging every day! I’ve decided to add another day on so I’ll be blogging five days a ... Read More about Delightfully Detailed Laser Cut Designer Series Paper
For this week's Paper Players Design Team challenge, I used one of my favorite bundles from the annual catalog, the Beautiful Bouquet stamp set and Bouquet Bunch dies. Although, this was not an
Pairing up the Stitched Rectangle Frames with the Forever Gold Laser-cut card panels is such a great discovery!! When I saw Kylie demonstrate this idea I knew I had to try it!! While the black frame is super striking with the Just Jade and Mint Macaron, I also wanted to try other color combos. So I also used (clockwise) Night of Navy with Misty Moonlight and Balmy Blue, and Pretty Peacock, Coastal Cabana and Pool Party. I immediately loved the idea of this card with the Stitched Rectangle Frames when I saw a video by Kylie Bertucci.
Hello stampers! What a whirlwind these last few weeks have been. One child has moved away to university, another one is preparing for a 10 month long world trip and I am in the middle of building a new house and ending a 30 year marriage. It really is no wonder that I have not blogged in a little while. It was great to get back into my stamp room and to practice my #loveitchop it mentality that was so aptly named by Kylie Bertucci. The Delightfully Detailed Laser-Cut paper really is beautiful. It is delightful. You also need to
Birthday Card created by UK Stampin' Up! demonstrator Sarah Phelan for Sarah's Stampin Retreat using the Forever Gold Laser-cut paper from Stampin Up
Welcome to the Pals July 2018 Blog Hop. We’re having a “Pattern Party”. This month our creations will feature our favorite Designer Series Papers and coordinating embellishments from the new annua
If there's anything I like better than laser-cut lace paper, it's laser-cut lace CARDS! I literally squee'd when I saw this beautiful tin and cards in the new catalog. I LOVE that the bases are pre-cut and folded, that the envelopes are scalloped to match, that you can add color to the back of the lace using any color of cardstock you want--I love it all! The tin itself is pretty, too--a peachy Petal Pink, with leafy branches in a coppery finish, and the perfect size for A-2 cards. You're meant to get the set, decorate the cards, tie up...
%
Hello and welcome to today’s card, which is a beautiful card to send, just because! This card was created with new products from the upcoming 2020-2021 Annual Catalog, the Lovely You Bundle a…
Thank you for joining us for our All Star Tutorial Bundle and the start of another six months together! We have a few changes in the team which is always exciting. We know you are going to love the inspiration that you get from our PDF tutorials each month. We wanted to put this blog hop together so you can see that we all have very different styles and ideas and that you are going to get great value and ideas from the bundle that we put together. PURCHASE APRIL BUNDLE Here is a sneak peek of our bundle for April As you might be able to notice from the small thumbnail, I used the AMAZING Beautifully Detailed Laser Cut Paper on my project. So, todays project for you uses the same paper - two ways! Firstly, I cut a piece of the GORGEOUS paper the same size as our Quick and Easy Note Cards (these are SUPER-DUPER Amazing). I lined up with the front of the note card and used sponge daubers in Gorgeous Grape and Bermuda Bay. I really like how the card turned out using the detailed paper as a mask. I white embossed the sentiment onto a piece of Gorgeous Grape and then cut this out with the Story Label punch and adhered with Dimensionals. How simple, easy and effective is this? Check out my QUICK video that I made - When I pulled off the "mask" I was shocked!! Both sides looked amazing - BOOM. I had just made two note cards in one go. OH YES! Got to love that. So I used a dauber sponge and applied some Tombow to the rear of the sheet used as a mask and fixed it to another notecard. Again, I white embossed the sentiment onto a piece of Gorgeous Grape and then cut this out with the Story Label punch and adhered with Dimensionals. And, within about ten minutes, I made two beautiful cards. And you can too! There are so many possibilities with these stunning Beautifully Detailed Laser-Cut Specialty Paper. Do you need any of these products? Here are some shopping links for you. Note: Australian Residents Only Beautifully Detailed Laser-Cut Specialty Paper $24.25 Whisper White Note Cards & Envelopes $11.25 Story Label Punch $31.00 Climbing Roses Cling Stamp Set $37.00 Sponge Daubers $9.00 Thank you so much for coming by today! Don't miss any of these amazing blogs to be inspired to create! BLOG HOP LIST April 2019 Tutorial Bundle is HERE! 12 amazing tutorials to inspire you $20 CLICK HERE TO PURCHASE THIS TODAY or FREE with ANY ONLINE ORDER
Click photos for my 2021 step-by-step tutorials.