Description The present invention relates to building components, particularly, but not exclusively, for roofing, in the form of inflatable cushions. The cushions comprise two or more layers of a plastic foil material such as ETFE (ethylene tetra flouro ethylene) inflated with low pressure air. The ETFE foil cushion is restrained in a perimeter frame usually manufactured from extruded aluminium, which in turn is fixed to a support structure. As the ETFE foil cushion is inflated, the ETFE is put under tension and forms a tight drum like skin. ETFE foil cushions are sold under a number of trade names, for example Texlon. ETFE cushions of this kind are fixed to a support structure to form a cladding and are used to enclose atria or other enclosed spaces to provide a transparent or translucent roof or façade to the enclosure, as an alternative to and in a similar way to glass. A number of buildings have been built using this technology most notably the Eden project in Cornwall, England. Whenever a space is enclosed by a cladding system due consideration needs to be given to the effects of a fire should it break out in the building. In these circumstances, smoke and other products of combustion must be ventilated from the enclosure to prevent injury to the occupants and property. In some specialist buildings, other noxious fumes may also need to be ventilated from the enclosure to prevent injury to the occupants and property. In some specialist buildings, other noxious fumes may also need to be ventilated to atmosphere. Typically this is achieved in two main ways. Firstly, the smoke, and/or fumes can be extracted by a mechanical extraction system usually consisting of fire-rated duct work and extraction fans. Alternatively, the smoke and/or fumes can be extracted by opening part of the roof or building façade and allowing the smoke to ventilate to atmosphere through the action of convection and/or wind. ETFE foil cushions can be used to ventilate smoke and/or fumes to the atmosphere in much the same ways as other cladding systems in that they can be fixed to a frame which opens automatically through a mechanical device in the event of fire. In addition, ETFE is a thermo-plastic material and therefore has the innate property of failing if the temperature reaches approximately 200°C, as the material loses its tensile properties as its temperature increases. When the cushion fails, it allows smoke and/or fumes to ventilate naturally to the atmosphere. The above methods suffer from a number of draw backs. The mechanical extraction approach is expensive and requires fire-rated machinery, regular maintenance and testing. Natural extraction requires expensive opening frames, which are complex to render, weather and watertight. They do not look the same as the adjacent cladding as they require a secondary opening frame, and mechanical operating parts which themselves require regular maintenance and testing. The failure of the ETFE due to high temperature does not occur if the building fire is located some way away from the ETFE, as the ETFE is not sufficiently heated by smoke and/or fumes to fail. It is an object of the present invention to provide an economical, visually unobtrusive, method of causing ETFE foil cladding systems to fail on demand in order to allow natural smoke ventilation from a building enclosure. It is a further object of the invention to allow the system to fail on demand in order to shed high loads such as snow or water ponding. Thus, according to one aspect, the present invention provides a building component in the form of an inflatable cushion comprising two or more sheets of plastics foil and a relatively rigid frame surrounding and supporting the foil sheets, the building component further incorporating a release mechanism in or adjacent to the frame arranged to release the foil sheets from the frame. Preferably, the sheets are made from ethylene tetrafluoro ethylene (ETFE). Preferably, the sheets define a space between them which is inflated with air and the frame restrains the sheets about their perimeters, thereby forming the cushion. The release mechanism may extend the entire periphery of the cushion. Alternatively, it may extend only part of the way around, for example, in the case of a polygonal cushion, it may extend around all sides except one. In the case of a rectangular cushion, therefore, it might extend around three sides. Preferably, the cushion has a bead formed around its periphery, and the bead is located within the frame. The bead may be a rope encapsulated by the sheet material. The bead may be held by a keder edge within the frame. The frame may be manufactured from extruded aluminium which in turn may be fixed to a support structure. The frame incorporates a device which releases the ETFE foil cushion from the frame in the event of fire so allowing the smoke to ventilate to atmosphere. There are two principal ways of releasing the ETFE foil cushion from the frame: mechanically releasing the cushion or cutting it free. In the case of mechanical release, this may be achieved by either extracting the rope from the bead which restrains the ETFE foil cushion in the frame, or by hinging a part of the frame so that it releases the keder edge. Preferably, therefore the release mechanism comprises a device which removes the rope from the bead on demand, releasing the ETFE foil cushion from the frame. Suitable means for removing the rope include by a mechanical winch, or ram, block and tackle. This can be done via a turning wheel. Alternatively, the release mechanism may comprise a hinged member engaging the cushion, the hinged member being movable on demand to a position in which it does not engage the cushion, thereby releasing the cushion from the frame. In the case of cutting the cushion free, preferably, the frame incorporates a cutting device which either physically cuts or melts the ETFE foil along the edge of the cushion. Preferably therefore, the release mechanism comprises an electrical resistance cable which causes the edge of the cushion to melt on demand, releasing the ETFE foil cushion from the frame. Alternatively, the release mechanism may comprise a cutting blade adjacent to the perimeter frame, and a means for moving the cutting blade so that on demand, the blade moves, cutting the ETFE foil cushion, thereby releasing the ETFE foil cushion from the frame. The cutting blade can be situated either above or below the inflated cushion. Suitable means for moving the blade include a mechanical winch, ram or block and tackle. Whichever mechanism is used, on release from the frame, the ETFE moves away from the frame so allowing the products of combustion or other noxious fumes to ventilate to atmosphere. On operation of the release mechanism on one or more sides, the ETFE foil cushion may form a cylindrical or spherical shape due to retention of pressurised air in the cushion; flap or fall away from one or more sides of the frame; or flap or fall away from all sides of the frame. In any event the removal of the cushion from all or part of the frame will allow smoke or noxious fumes to ventilate from the building. It will also allow any excessive water or snow loads to be released. The invention may be carried into practice in a number of ways and four embodiments will now be described by way of example with reference to the accompanying drawings, in which: Figure 1 is a plan of an ETFE cushion in accordance with the present invention; Figure 2 is a cross section through the assembly of Figure 1; Figure 3 is a detailed cross section of the perimeter cushion frame showing one embodiment of release mechanism; Figure 4 is a detailed cross section of an alternative perimeter cushion frame showing a variant of the first embodiment of release mechanism; Figure 5 is a detailed cross section of the perimeter cushion frame showing a second embodiment of release mechanism; Figure 6 is a detailed cross section of the perimeter cushion frame showing a third embodiment of release mechanism; Figure 7 is a detailed cross section of a perimeter cushion frame showing a fourth embodiment of release mechanism; and Figure 8 is an elevation of Figure 7. Figure 1 shows an ETFE cushion in accordance with the invention. The cushion 11 comprises three rectangular ETFE foil sheets 12, 13, 14, a support frame 15 and a plenum 16. The frame 15 is located about the perimeter of the sheets 12, 13, 14 and incorporates a release mechanism 17 (not shown). The space between the sheets 12, 13, 14 is inflated with air via the plenum 16. Figure 3 shows a first embodiment of release mechanism. The overall arrangement comprises a cushion 21, a support frame 22 and a building structure 23. The cushion 21 has a bead 24 at its perimeter made from a rope 25 encapsulated by an extended portion of the sheets 26, 27, 28. Between the bead 24 and the inflated part of the cushion 21, there is an edge support 29. The bead 24 is captured within a keder edge 31, made from aluminium. The frame 22 comprises a housing 32 and a cap 33. The keder edge 31 is clipped into the housing 32 and the cap 33 is bolted into the housing 32 to form a weather-tight seal. The housing 32 is itself bolted to the structure 23. The edge support 29 includes an electrical resistance cable 34 extending around the perimeter of the cushion 21, or at least around three miles. When required, current is passed through the cable 34, raising its temperature to a level where the ETFE foil 26, 27, 28 or the support 29 fails and the cushion 21 is freed from the frame 22. The variant shown in Figure 4 is similar to that of Figure 3, but in this case, the bead 44 of the cushion 41 is located in a compressible gasket 42 made for example of EPDM which is itself swaged into a retaining channel 43 forming part of the frame 45. Again, there is a resistance cable 46 in contact with the foil of the cushion 41 which causes the foil to fail when current is passed. Figure 5 shows a second embodiment. Again, the cushion 51 is located within the frame 52 by means of a peripheral bead 53 including a rope 54, the bead being captured by a keder edge 55 which is clipped into the frame housing 56. However, in this embodiment, there is no resistance wire. Instead, the rope 54 is wound round a pulley 57 and connected to a winch (not shown). Thus, when required, the rope 54 is drawn by a winch, and the bead 53 collapses. As a result, the cushion 51 is released. Figure 6 shows a third embodiment. In this case, the cushion 61 is located within the frame 62 by means of a peripheral bead 63 captured by a keder edge 54 clipped into the frame housing 65. However, in this embodiment, a blade 66 is provided on a carriage 67 which is arranged to be rotatable and to travel along a track 68 around at least three sides of the periphery of the cushion 61, when required, cutting through the cushion foils to free the cushion 61. Although the blade 66 is shown located below the cushion it could equally well be above. The blade 66 is shown in its deployed position, cutting through the foils. It is to be understood that in its normal position, the blade 66 would not make contact with the foils. When required, the blade 66 would be swung into the deployed position and moved along the cushion 61. There may be a separate blade 66 for each side of the cushion 61. Figures 7 and 8 show a fourth embodiment. In this case the cushion 71 is located within the frame 72 by means of a peripheral bead 73 captured by a keder edge 74 clipped into the frame housing 75. However, in this embodiment, the foils, between the bead 73 and the inflated part of the cushion 71 are supported on and held along each edge by a hinged member 76 forming part of the housing 75. Each hinged member 76 is pivoted about an axle 77. Each hinged member 76 is held in its normal position, engaging the foils, by a series of levers 78 which are pivotally connected to the frame 72 by pins 79. The levers 78 are connected together by connecting rods 81 and one lever is connected to a pneumatic or hydraulic ram 82. When it is desired to release the cushion 71, the ram 82 associated with each side is operated. This draws the levers 78 towards the ram 82, rotating them clockwise about the pins 79 to the positions shown in broken lines. This in turn allows the hinged member 79 to pivot downwards about the axle 77 to the positions shown in broken lines, so releasing the cushion 71 from the housing 75. It will be appreciated that the arrangements shown in the third and fourth embodiments could be combined, to allow the cushion to be released downwards to the blade. It will also be appreciated that, as with the earlier embodiments, the release mechanism described can act on three sides or all four sides of the cushion. As will also be understood, when the cushion is released, smoke can be ventilated and/or any accumulated excess snow or water loads can be released.

Description The present invention relates to building components, particularly, but not exclusively, for roofing, in the form of inflatable cushions. The cushions comprise two or more layers of a plastic foil material such as ETFE (ethylene tetra flouro ethylene) inflated with low pressure air. The ETFE foil cushion is restrained in a perimeter frame usually manufactured from extruded aluminium, which in turn is fixed to a support structure. As the ETFE foil cushion is inflated, the ETFE is put under tension and forms a tight drum like skin. ETFE foil cushions are sold under a number of trade names, for example Texlon. ETFE cushions of this kind are fixed to a support structure to form a cladding and are used to enclose atria or other enclosed spaces to provide a transparent or translucent roof or façade to the enclosure, as an alternative to and in a similar way to glass. A number of buildings have been built using this technology most notably the Eden project in Cornwall, England. Whenever a space is enclosed by a cladding system due consideration needs to be given to the effects of a fire should it break out in the building. In these circumstances, smoke and other products of combustion must be ventilated from the enclosure to prevent injury to the occupants and property. In some specialist buildings, other noxious fumes may also need to be ventilated from the enclosure to prevent injury to the occupants and property. In some specialist buildings, other noxious fumes may also need to be ventilated to atmosphere. Typically this is achieved in two main ways. Firstly, the smoke, and/or fumes can be extracted by a mechanical extraction system usually consisting of fire-rated duct work and extraction fans. Alternatively, the smoke and/or fumes can be extracted by opening part of the roof or building façade and allowing the smoke to ventilate to atmosphere through the action of convection and/or wind. ETFE foil cushions can be used to ventilate smoke and/or fumes to the atmosphere in much the same ways as other cladding systems in that they can be fixed to a frame which opens automatically through a mechanical device in the event of fire. In addition, ETFE is a thermo-plastic material and therefore has the innate property of failing if the temperature reaches approximately 200°C, as the material loses its tensile properties as its temperature increases. When the cushion fails, it allows smoke and/or fumes to ventilate naturally to the atmosphere. The above methods suffer from a number of draw backs. The mechanical extraction approach is expensive and requires fire-rated machinery, regular maintenance and testing. Natural extraction requires expensive opening frames, which are complex to render, weather and watertight. They do not look the same as the adjacent cladding as they require a secondary opening frame, and mechanical operating parts which themselves require regular maintenance and testing. The failure of the ETFE due to high temperature does not occur if the building fire is located some way away from the ETFE, as the ETFE is not sufficiently heated by smoke and/or fumes to fail. US-A-4 878 322 describes a building component with all of the features of the preamble of claim 1, in that it discloses a skeletal frame supporting a continuous sealed, flattened plastic film tube for retaining gas under positive pressure, whereby the tube has opposed edges with a flexible film retainer line passing therethrough to form edge beads. It is an object of the present invention to provide an economical, visually unobtrusive, method of causing ETFE foil cladding systems to fail on demand in order to allow natural smoke ventilation from a building enclosure. It is a further object of the invention to allow the system to fail on demand in order to shed high loads such as snow or water ponding. Thus, according to one aspect, the present invention provides a building component in the form of an inflatable cushion comprising two or more sheets of plastics foil attached by connecting means to a relatively rigid frame surrounding and supporting the foil sheets, the building component further incorporating a release mechanism in or adjacent to the frame arranged to release the foil sheets from the frame. Preferably, the sheets are made from ethylene tetrafluoro ethylene (ETFE). Preferably, the sheets define a space between them which is inflated with air and the frame restrains the sheets about their perimeters, thereby forming the cushion. The release mechanism may extend the entire periphery of the cushion. Alternatively, it may extend only part of the way around, for example, in the case of a polygonal cushion, it may extend around all sides except one. In the case of a rectangular cushion, therefore, it might extend around three sides. Preferably, the cushion has a bead formed around its periphery, and the bead is located within the frame. The bead may be a rope encapsulated by the sheet material. The bead may be held by a keder edge within the frame. The frame may be manufactured from extruded aluminium which in turn may be fixed to a support structure. The frame incorporates a device which releases the ETFE foil cushion from the frame in the event of fire so allowing the smoke to ventilate to atmosphere. There are two principal ways of releasing the ETFE foil cushion from the frame: mechanically releasing the cushion or cutting it free. In the case of mechanical release, this may be achieved by either extracting the rope from the bead which restrains the ETFE foil cushion in the frame, or by hinging a part of the frame so that it releases the keder edge. Preferably, therefore the release mechanism comprises a device which removes the rope from the bead on demand, releasing the ETFE foil cushion from the frame. Suitable means for removing the rope include by a mechanical winch, or ram, block and tackle. This can be done via a turning wheel. Alternatively, the release mechanism may comprise a hinged member engaging the cushion, the hinged member being movable on demand to a position in which it does not engage the cushion, thereby releasing the cushion from the frame. In the case of cutting the cushion free, preferably, the frame incorporates a cutting device which either physically cuts or melts the ETFE foil along the edge of the cushion. Preferably therefore, the release mechanism comprises an electrical resistance cable which causes the edge of the cushion to melt on demand, releasing the ETFE foil cushion from the frame. Alternatively, the release mechanism may comprise a cutting blade adjacent to the perimeter frame, and a means for moving the cutting blade so that on demand, the blade moves, cutting the ETFE foil cushion, thereby releasing the ETFE foil cushion from the frame. The cutting blade can be situated either above or below the inflated cushion. Suitable means for moving the blade include a mechanical winch, ram or block and tackle. Whichever mechanism is used, on release from the frame, the ETFE moves away from the frame so allowing the products of combustion or other noxious fumes to ventilate to atmosphere. On operation of the release mechanism on one or more sides, the ETFE foil cushion may form a cylindrical or spherical shape due to retention of pressurised air in the cushion; flap or fall away from one or more sides of the frame; or flap or fall away from all sides of the frame. In any event the removal of the cushion from all or part of the frame will allow smoke or noxious fumes to ventilate from the building. It will also allow any excessive water or snow loads to be released. The invention may be carried into practice in a number of ways and four embodiments will now be described by way of example with reference to the accompanying drawings, in which: Figure 1 is a plan of an ETFE cushion in accordance with the present invention; Figure 2 is a cross section through the assembly of Figure 1; Figure 3 is a detailed cross section of the perimeter cushion frame showing one embodiment of release mechanism; Figure 4 is a detailed cross section of an alternative perimeter cushion frame showing a variant of the first embodiment of release mechanism; Figure 5 is a detailed cross section of the perimeter cushion frame showing a second embodiment of release mechanism; Figure 6 is a detailed cross section of the perimeter cushion frame showing a third embodiment of release mechanism; Figure 7 is a detailed cross section of a perimeter cushion frame showing a fourth embodiment of release mechanism; and Figure 8 is an elevation of Figure 7. Figure 1 shows an ETFE cushion in accordance with the invention. The cushion 11 comprises three rectangular ETFE foil sheets 12, 13, 14, a support frame 15 and a plenum 16. The frame 15 is located about the perimeter of the sheets 12, 13, 14 and incorporates a release mechanism 17 (not shown). The space between the sheets 12, 13, 14 is inflated with air via the plenum 16. Figure 3 shows a first embodiment of release mechanism. The overall arrangement comprises a cushion 21, a support frame 22 and a building structure 23. The cushion 21 has a bead 24 at its perimeter made from a rope 25 encapsulated by an extended portion of the sheets 26, 27, 28. Between the bead 24 and the inflated part of the cushion 21, there is an edge support 29. The bead 24 is captured within a keder edge 31, made from aluminium. The frame 22 comprises a housing 32 and a cap 33. The keder edge 31 is clipped into the housing 32 and the cap 33 is bolted into the housing 32 to form a weather-tight seal. The housing 32 is itself bolted to the structure 23. The edge support 29 includes an electrical resistance cable 34 extending around the perimeter of the cushion 21, or at least around three miles. When required, current is passed through the cable 34, raising its temperature to a level where the ETFE foil 26, 27, 28 or the support 29 fails and the cushion 21 is freed from the frame 22. The variant shown in Figure 4 is similar to that of Figure 3, but in this case, the bead 44 of the cushion 41 is located in a compressible gasket 42 made for example of EPDM which is itself swaged into a retaining channel 43 forming part of the frame 45. Again, there is a resistance cable 46 in contact with the foil of the cushion 41 which causes the foil to fail when current is passed. Figure 5 shows a second embodiment. Again, the cushion 51 is located within the frame 52 by means of a peripheral bead 53 including a rope 54, the bead being captured by a keder edge 55 which is clipped into the frame housing 56. However, in this embodiment, there is no resistance wire. Instead, the rope 54 is wound round a pulley 57 and connected to a winch (not shown). Thus, when required, the rope 54 is drawn by a winch, and the bead 53 collapses. As a result, the cushion 51 is released. Figure 6 shows a third embodiment. In this case, the cushion 61 is located within the frame 62 by means of a peripheral bead 63 captured by a keder edge 54 clipped into the frame housing 65. However, in this embodiment, a blade 66 is provided on a carriage 67 which is arranged to be rotatable and to travel along a track 68 around at least three sides of the periphery of the cushion 61, when required, cutting through the cushion foils to free the cushion 61. Although the blade 66 is shown located below the cushion it could equally well be above. The blade 66 is shown in its deployed position, cutting through the foils. It is to be understood that in its normal position, the blade 66 would not make contact with the foils. When required, the blade 66 would be swung into the deployed position and moved along the cushion 61. There may be a separate blade 66 for each side of the cushion 61. Figures 7 and 8 show a fourth embodiment. In this case the cushion 71 is located within the frame 72 by means of a peripheral bead 73 captured by a keder edge 74 clipped into the frame housing 75. However, in this embodiment, the foils, between the bead 73 and the inflated part of the cushion 71 are supported on and held along each edge by a hinged member 76 forming part of the housing 75. Each hinged member 76 is pivoted about an axle 77. Each hinged member 76 is held in its normal position, engaging the foils, by a series of levers 78 which are pivotally connected to the frame 72 by pins 79. The levers 78 are connected together by connecting rods 81 and one lever is connected to a pneumatic or hydraulic ram 82. When it is desired to release the cushion 71, the ram 82 associated with each side is operated. This draws the levers 78 towards the ram 82, rotating them clockwise about the pins 79 to the positions shown in broken lines. This in turn allows the hinged member 79 to pivot downwards about the axle 77 to the positions shown in broken lines, so releasing the cushion 71 from the housing 75. It will be appreciated that the arrangements shown in the third and fourth embodiments could be combined, to allow the cushion to be released downwards to the blade. It will also be appreciated that, as with the earlier embodiments, the release mechanism described can act on three sides or all four sides of the cushion. As will also be understood, when the cushion is released, smoke can be ventilated and/or any accumulated excess snow or water loads can be released.

About Civil Engineering • Interview Questions • oneliner • current affairs • basic of Civil Engineering

The Planter Brick may be the sexiest hardscape building component we've ever seen. Designed by Real San Fratello Architects, the Planter Brick can be insta

A foundational overview of how to build color-adaptive, responsive, and accessible mini and mega modals with the `` element.

A foundational overview of how to build a responsive, adaptive, and accessible, multiselect component for sort and filter user experiences.

Flexible connections for Aluminium Extrusions & Aluminium Profiles. Machine Building Systems. Aluminium Extrusion Systems & Aluminium Profile Systems. The economy aluminium extrusion profile system.

By Thu Nghiem If you want to make your website look attractive, you need to know CSS. CSS, or Cascading Style Sheets, is a style sheet language that is used to style your web content. In this tutorial, we are going to learn about CSS basics by build...

HTML and CSS are the most important technologies when it comes to creating websites. And building projects is one of the best ways to learn them. We just published a course on the freeCodeCamp.org YouTube channel that will help you learn HTML and CSS...

This Amrapali Network Diagram shows how a computer or communications network is organized. It demonstrates the routers, devices, hubs, firewalls, and other network building blocks as well as how they interact in a network. Visit EdrawMax for more network diagram templates!

In this example, we will be creating a customizable Modal component with React.

With the same concept when we use it with an inductive load to protect flyback voltage spikes, we call it a flyback diode. In this article, we will discuss

Crossing Escalator arrangements provide the most efficient and continuous movement of people by separating each direction of travel into an individual uninterrupted path. Crisscrossing escalators should be considered when space planning and productivity are critical design objectives. Continuous Escalators (Crossing) have a combined height of 29.5’ (9 m), length of 41’ (12.5 m), and common width between 8’-10’8” (2.44-3.28 m). Dimensions will vary based on the desired length and height.

A use case diagram is used to represent the dynamic behavior of a system. It encapsulates the system's functionality by incorporating use cases, actors, and ...

About a year ago at Gusto we were talking about building a component library; the holy grail signifying a design team maturing from a startup to a team that puts value on process. A component library…

A perfect transparent and natural award winning hifi sound through acoustic research since 2007, combined with the retro beauty of mid century modern furniture of bend plywood and wireless technology.

Fig. 1. UML Diagram - "A Survey on Generation of Test Cases using UML Diagrams"

IRIS is a consortium of universities dedicated to the operation of science facilities for the acquisition, management, and distribution of seismological data.