Condition Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.learn more Brand ADAM Audio Model ADAM Audio A7V 7-Inch Active Studio Monitor Speaker (Pair)
Der ADAM T7V ist ein Nahfeld-Studio-Monitor und als vertikal ausgerichtetes 2-Wege-System angelegt.
Adam Audio A77H Powered Three-Way Midfield Studio Monitor Adam Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad in the horizontal axis but tightly focused in the vertical plane. The A Series introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology whether you position the speakers horizontally or vertically. The A Series HPS Waveguide is made from a new glass fiber polymer compound that helps create a clear sound, free of unwanted resonance. The Adam Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides precise transient responses and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed, consistent sound across the product line. Multi-Layer Mineral Woofer A Series woofers are constructed with a unique blend of mineral stone fibers that have been baked together to create a lightweight but highly stable material. The mineral composition, layering, and geometry of each cone are specific to the driver used in each model. By combining this material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean low-end. Midrange Driver Adapted from the groundbreaking ADAM Audio DCH midrange driver used by the S Series speakers, the A Series midrange driver delivers a clean sound in a critical part of the frequency range where humans are especially sensitive to the coloration of the sound. Using a dedicated driver for the midrange further helps clarify lows and highs by eliminating the need for woofers to reproduce midrange frequencies and thus reducing distortion. Hybrid Amplification The A Series combines the best of both digital and analog worlds. The woofers are driven by Class D amplifiers that help produce linear performance while reducing distortion. These amplifiers were chosen specifically for their power and efficiency, in terms of both energy consumption and sound reproduction. Low thermal dissipation allows for a smaller heat sink, which facilitated additional investment in the exceptional power and performance of the A Series. DSP-Based Electronics The A Series capitalizes on the transformative power of DSP-based electronics to provide greater tuning precision and better predictability than analog-only speakers. With firmware that can be updated through an Ethernet connection, over time you can expect to integrate the latest DSP-based capabilities from ADAM Audio—including new filter types and features, plus alternative voicings. FocusProAudio 25Feet XLR Male to Female Microphone Cable FocusProAudio 25-FeeT XLR Male to XLR Female Microphone Cable is professionally designed to prevent external interference and ensure signals travel rapidly and smoothly with minimum distortion, delay, or loss. These cables feature two 20-gauge CCAM conductors, which are twisted pairs with cotton yarn fillers, conductive PVC shield with 100 percent coverage, and CCAM spiral shielding with 90 percent coverage. Kirlin 3.5mm TRS to Dual 1/4-Inch TS Stereo Breakout Cable The Kirlin 3.5mm TRS to Dual 1/4-Inch TS Stereo Breakout Cable is a handy accessory to have along with your other Pro audio paraphernalia. This cable features a 24x2 gauge OFC (Oxygen-Free-Copper) conductor and two 42x1 OFC (Oxygen-Free-Copper) conductors with 80% OFC spiral shielding coverage. This RoHS compliant cable is covered by a 3-year limited manufacturer warranty.
The #1 Costly Mistake to AVOID When Shopping for Studio Monitors | PLUS, The 9 Best Studio Monitors of Today that You Absolutely MUST-KNOW.
Looking for the best studio monitors? Our expert reviews and buying guide will help you find the perfect pair for your music production needs.
Adam Audio T5V Nearfield Monitor – 2-Way 5" Woofer (Pair) The Adam Audio T5V is a powerful and precise nearfield monitor designed to deliver outstanding sound quality for both professional studios and home setups. Whether you’re mixing, mastering, or producing, the T5V provides accurate and uncolored audio, allowing you to hear every detail of your music. Key Features: 5-Inch Woofer: The 5” polypropylene woofer offers deep, controlled bass, ideal for small to medium-sized rooms, providing a clear low-end response down to 45 Hz. U-ART Ribbon Tweeter: Equipped with Adam Audio’s proprietary U-ART Accelerated Ribbon Tweeter, the T5V delivers high-end frequencies with crystal-clear precision and minimal distortion up to 25 kHz. Optimized Waveguide: The tweeter features an HPS waveguide based on Adam Audio’s flagship S-Series, ensuring a wide sweet spot and superior imaging, allowing you to sit comfortably while monitoring. Class-D Amplifiers: Dual Class-D amplifiers (50 W for the woofer and 20 W for the tweeter) provide ample headroom and clean, powerful output, reaching a maximum SPL of 106 dB. Compact Design: The T5V’s compact and sleek design makes it an excellent choice for smaller spaces, while the rear-ported cabinet design enhances the low-frequency extension. Versatile Connectivity: With both XLR and RCA inputs, the T5V is highly versatile and easily integrates into any studio setup. Room Adaptability: The monitor includes room tuning controls for both high and low frequencies, allowing you to fine-tune the sound to suit your space. At an affordable price, the Adam Audio T5V offers high-end performance that rivals more expensive monitors, making it a top choice for any serious musician, producer, or audio engineer. Grab yours now from Muso’s Stuff at 115 Mitchell St, Bendigo or online! Quick Highlights: 5” woofer for deep bass response U-ART ribbon tweeter for detailed highs Powerful dual Class-D amplifiers HPS waveguide for wide sweet spot Available at Muso’s Stuff - SKU: 11102210
Limited Edition 25th anniversary in White ADAM A7V Active Two-Way Speaker (Single). Audio professionals in need of a high-quality nearfield monitor will be impressed with the Adam Professional Audio A7V, a professional, 7" 2-way studio monitor speaker that delivers rich, spacious, and enveloping sound. A 110W RMS Class-D amplifier powers the 7" Multilayer Mineral (MLM) woofer, while a 20W Class A/B amplifier drives the X-ART tweeter with HPS waveguide to provide an ultrawide frequency range (41 Hz to 42 kHz). The rotatable High-Frequency Propagation System (HPS) waveguide technology and onboard DSP allow you position the monitor either horizontally or vertically, while fine-tuning the speaker to your precise requirements. Features: 7" Multilayer Mineral Woofer Rotatable X-ART Tweeter + HPS Waveguide 110W RMS Class-D Amp for Woofers 20W Class-AB Amp for X-ART Tweeter XLR and RCA Inputs Dual Bass Ports + 3 Voice Selections Room Adaptation: 4-Band Equalization Ethernet for A-Control DSP Software Integrated Sonarworks Room Correction
A self-developed one-piece hybrid dome/cone design, offering the sonic advantages of both driver types, with minimal partial resonances.
Looking for the best studio monitors? Our expert reviews and buying guide will help you find the perfect pair for your music production needs.
Pakketaanbieding bestaande uit 2x ADAM Audio T8V Actieve nabijveldmonitor 8" woofer 1,9" U-ART ribbon tweeter 2 Class-D versterkers: 70 watt RMS woofer, 20 watt RMS tweeter Frequentiebereik: 33 - 25.000 Hz Crossover-frequentie: 2600 Hz Maximaal geluidsniveau: 118 dB (1m / paar) Basreflexopening aan de achterzijde Instelbare +/- 2 dB high-shelf en low-shelf filters 1 Lijningang per XLR en RCA Geïntegreerde breedbandige netvoeding 100-240V Afmetingen (B x H x D): 250 x 400 x 335 mm Gewicht: 9,8 kg Leveringshoeveelheid: 1 stuk 2x Millenium Desktop Monitor Stand MS-8 Tafelstatief voor Studio Monitor Rubberen steunvlak om de monitor stevig te kunnen plaatsen Steunvlak: 391 x 288 mm Kantelbaar in 4 stappen: 5, 10, 13 en 15 graden Maximaal draagvermogen: 15,5 kg Gewicht: 1,55 kg 30 30 dagen Money-back garantie 3 Drie jaar Thomann garantie Leverbaar sinds Oktober 2023 artikelnummer 578872 verkoopseenheid 1 stuk Speaker size 1x 8" Amplifier power per unit (RMS) 90 W Magnetic Shielding No Analogue XLR Input Yes Analogue Input (Jack) No Analogue Input (Mini Jack) No Analogue Input (RCA) Yes Digital input No Manual frequency correction Yes Frequency range min. 33 Hz Frequency range max. 25000 Hz Dimensions in mm 250 x 400 x 335 Weight in kg 9,8 kg Speaker Hous8ing - Woofer System Bassreflex Toon meer
Adam Audio A77X 7" Left & Right Active Nearfield Monitor Speakers $1600 + Free Shipping https://t.co/2EVhPBCUB8 #Slickdeals
Vom 3. bis 5. Mai 2018 wurde Berlin erneut zum Mekka für alle Fans von analogen Synthesizern, denn Schneiders Laden lud nun zum dritten Mal zur Superbooth ein.
The excellent price-performance ratio of the AX Seires makes them suitable for professional studio applications as well as upscale home recording.
The T Series is ADAM Audio’s range of affordable, professional 2-way powered studio monitors, offering extremely high performance for an attractive price.
Adam A4V 4-Inch Active Studio Monitor Speaker w/ Rotatable X-ART Tweeter Designed for small studio spaces, short listening distances and immersive multi-speaker configurations, the A4V delivers accurate, full-bodied sound in a compact form factor. This two-way speaker incorporates a 4-inch long-throw woofer made from the same Multi-Layer Mineral (MLM) fibers as other A Series speakers plus the classic X-ART tweeter. Onboard DSP-based tuning capabilities let you easily dial in the perfect sound for your space. With a frequency range of 53 Hz to 42 kHz, the A4V can accommodate a broad spectrum of audio applications—from producing podcasts to mixing string quartets—and will fit well within immersive and 3D setups. Rotatable HPS Waveguide & X-ART Tweeter ADAM Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad in the horizontal axis but tightly focused in the vertical plane. The A Series introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology whether you position the speakers horizontally or vertically. The A Series HPS Waveguide is made from a new glass fiber polymer compound that helps create a clear sound, free of unwanted resonance. The ADAM Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides a precise transient response and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed, consistent sound across the product line. Multi-Layer Mineral Woofer A Series woofers are constructed with a unique blend of mineral stone fibers that have been baked together to create a lightweight but highly stable material. The mineral composition, layering and geometry of each cone is specific to the driver used in each model. By combining this material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean low-end. Hybrid Amplification The A Series combines the best of both digital and analogue worlds. The woofers are driven by Class D amplifiers that help produce linear performance while reducing distortion. These amplifiers were chosen specifically for their power and efficiency, in terms of both energy consumption and sound reproduction. Low thermal dissipation allows for a smaller heat sink, which facilitated additional investment in the exceptional power and performance of the A Series. Tweeters and midrange drivers are powered by Class AB amplifiers which offer a smooth, natural reproduction of high frequencies. Each amplifier is optimized for its working range, resulting in a fine-tuned, properly aligned speaker. To reach this point, ADAM Audio carried out extensive measurements and listening sessions, trialing countless amplifiers and amplifier components. DSP-Based Electronics The A Series capitalizes on the transformative power of DSP-based electronics to provide greater tuning precision and better predictability than analogue-only speakers. With firmware that can be updated through an Ethernet connection, over time you can expect to integrate the latest DSP-based capabilities from ADAM Audio—including new filter types and features, plus alternative voicings. Room Adaptation On the back panel of A Series speakers, you will find four bands of room adaptation equalization: Bass, Desk, Presence and Treble. Each band is adjustable in predefined steps, offering more than 100 tuning options to help compensate for the typical acoustic problems that arise from speaker placement. Voicings A “Voicing” is a pre-defined sound profile of the A Series monitors. On the back panel, you will find two different selections, “UNR” and “Pure”. Here you will also find the “Ext” option which is dedicated to the extended functionality that comes with A Control via the Ethernet connection. “UNR” or “Uniform Natural Response™” is a dynamic, natural-sounding response curve of ADAM Audio’s own design, which stems from a variety of iconic ADAM Audio legacy products, including the preceding AX Series. It lends itself to production, composition and song writing as its engaging and present sound can give you more room for creativity and flow. It is also a great option whenever you want to use your speakers simply to enjoy some good music. “Pure” is a highly accurate and neutral sounding option. This is the “flat” setting, ideal for mixing and mastering, where you really must be aware of all the details and rely on an honest representation from your speakers. The “Ext” option is dedicated to the extended functionality that comes with A Control via the Ethernet connection. Using A Control’s six-band EQ, a custom voicing and be created and pushed to the monitor. A Control (Real-Time Remote Control) The DSP-based functionality of all A Series monitors can be controlled remotely and in real time over Ethernet using the free to download A Control software. A Control is available to download for Windows and MacOS in the MyADAM area of for customers who have registered their A Series monitors. Once downloaded and installed, you can control multiple speakers at once, precisely adjusting equalization and delay settings from various listening positions in your studio space. While you work, you can remotely control monitor levels if you’re far from a fader or physical interface. Remote-control capabilities are particularly useful in multi-purpose rooms allowing you to make sure that voicing, EQ, and other settings are all exactly how you want them. Room Correction & Sonarworks Integration A Series speakers are designed to be adaptable to changing requirements, preferences, and environments. Using the A Control software, you can push advanced filters directly to an embedded platform onboard the monitors to help compensate for imperfect room acoustics. This embedded platform supports filters from industry leading third-party Sonarworks. Using Sonarworks software and a measurement mic, you can calibrate your speakers for a new room or shifting taste. Bass Reflex System, Cabinets and Mounting The new A Series cabinets build on the heritage of ADAM Audio and the AX Series in particular. In an evolutionary design, A Series cabinets have deeper beveling to further reduce diffraction. In addition, thicker baffle walls strengthen the cabinets and reduce internal vibrations, while a flared-port design optimizes airflow and reduces port noise. All A Series speakers include an underside mounting interface, giving you the flexibility to mount them wherever you need them. A Solution for Every Space With five models of varying dimensions and specifications to choose from, finding the right speaker is simply a matter of taste and understanding the acoustic requirements of your space. For added flexibility when it comes to speaker positioning, the rotatable HPS waveguide means each speaker can be used in a horizontal or vertical position with minimal compromise in sound quality. Room adaptation options directly on the backplate of the monitor help address common speaker placement issues such as bass overrepresentation caused by nearby walls and surfaces. Superior Audio Performance Every aspect of the A Series’ design, material, and components contributes toward exceptional sound quality and improved output when comparing similar models of the preceding AX Series. The combination of Class D amplifiers used in A Series woofers, and the Class AB amplifiers found in the tweeters deliver impressive SPL across the range and an ultra-low frequency response. The use of digital signal processing enables the more advanced features found in the A Series. All A Series speakers come equipped with an X-ART tweeter enclosed in a tailor made HPS waveguide. The high quality of the tweeter materials, folded by hand in Berlin, combined with the precise propagation control of the waveguide, results in superior dispersion of high frequencies over short and long listening distances. A Series woofers are constructed from multiple layers of mineral stone fibers baked together to create a lightweight but highly stable material that helps eliminate partial vibrations and other sonic impurities. By combining that material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean sound for low-end material. The elegant design of A Series cabinets also contributes toward superior audio performance. Specifically, the cabinets have deeper beveling to minimize diffraction, and thicker baffle walls that reduce vibrations within the enclosure. In addition, a flared-port design reduces port noise compared with AX Series speakers by optimizing airflow. Truthful Mixing The A Series features 2 selectable voicing options found directly on the back panel of the monitors. “Pure” is a highly accurate and neutral sounding option. This is a super flat setting, offering an honest representation from your speakers and making it ideal for mixing, mastering and critical listening applications. Characterful Sound The A Series also offers the characterful and present sound you would expect from ADAM Audio. “UNR” or “Uniform Natural Response™” is a dynamic, natural-sounding voicing that is selectable on the back panel of the monitors. Its design stems from a variety of iconic ADAM Audio legacy products, including the preceding AX Series. It lends itself to production, composition and song writing as its engaging sound can give you more room for creativity and flow. It is also a great option whenever you want to use your speakers simply to enjoy some good music. Save Space with Mounting Options The A Series cabinets were designed with mounting in mind. All models feature four M8 threaded screw holes (10 mm depth) in a rectangular pattern of 127 mm x 70 mm. Stay in the Zone with Remote
Unrivaled, ranging to 33Hz with a max SPL of 118 dB per pair, the T8V is the first 8\" ADAM monitor in the entry-level segment. It extends the product portfolio of the T Series, ADAM Audio’s range of affordable, professional 2-way powered studio monitors and a matched subwoofer, offering high performance for an extremely competitive price. The T8V is the perfect studio speaker for those who have always wanted to work with an 8\" monitor from ADAM Audio, but where budgets have been insufficient. The 5-year warranty gives users additional security and the certainty of having purchased a quality product.
Discover the pinnacle of sonic excellence with the A7V Vertical 7" 130W Powered Active 2-Way Studio Monitor, a testament to ADAM Audio's relentless pursuit of perfection in audio reproduction. This state-of-the-art monitor is the successor to the critically acclaimed A7X, and it continues to set new benchmarks in the industry for both home enthusiasts and professional audio engineers. At the heart of the A7V lies a robust 7" Multi-Layer Mineral (MLM) woofer, meticulously engineered to deliver deep, precise bass with exceptional clarity. Complementing the woofer is the handcrafted X-ART tweeter, a signature of ADAM Audio, which is renowned for its airy and transparent high-frequency response. This tweeter is rotatable, allowing for flexible positioning and optimal sound dispersion, ensuring an immersive listening experience regardless of your studio layout. The A7V is not just about exceptional sound quality; it's also about intelligent control. With the innovative A Control software, freely available for download, users gain access to DSP-based voicing, equalization, and room correction options. This software enables real-time adjustments over ethernet, providing an unprecedented level of customization to achieve the perfect sound in any environment. ADAM Audio's pioneering spirit shines through with the inclusion of a high-frequency propagation system (HPS) waveguide, crafted from a new glass fiber polymer compound. This waveguide works in harmony with the X-ART tweeter to deliver sound with remarkable consistency and spatial accuracy. The monitor's cabinet design builds upon the legacy of the AX Series, incorporating a bass reflex system that enhances the monitor's low-end response while minimizing port noise. The cabinet's robust construction also aids in reducing unwanted resonances, providing a clean and focused sound. In collaboration with Sonarworks, ADAM Audio introduces an automated room correction solution that integrates seamlessly with the monitor's DSP. This feature ensures optimal performance by compensating for room acoustics, delivering a tailored listening experience that brings out the best in your mixes. Hybrid amplification technology in the A7V combines the advantages of digital and analog audio, offering the warmth of analog with the precision of digital amplification. This results in a powerful and dynamic sound that captures every nuance of your audio material. The A7V offers a selection of "Voicings," pre-defined sound profiles that can be easily switched between to suit different mixing scenarios. The "UNR" and "Pure" settings on the back panel provide quick access to these profiles, allowing for instant sonic adjustments. Additionally, the monitor features four bands of room adaptation equalization - Bass, Desk, Presence, and Treble - on the back panel, enabling users to fine-tune the monitor's response to their specific room characteristics. Harnessing the transformative power of digital signal processing (DSP), the A7V delivers precision tuning that surpasses the capabilities of traditional analog-only speakers. This advanced technology ensures that the A7V will remain at the forefront of monitor technology, with updatable firmware that allows for the implementation of new filters and tunings throughout the lifespan of the monitor. Embrace the future of sound with the A7V Vertical 7" 130W Powered Active 2-Way Studio Monitor, where cutting-edge technology meets unparalleled audio fidelity.
De Adam T5V Duo Pack is een set 5 inch studio monitors voor beginnende producers. Een versterker heb je niet nodig, want de speakers zijn actief. Verbind de speakers rechtstreeks met jouw geluidskaart of computer en ga aan de slag. Dankzij de XLR connector zorg je voor een gebalanceerde verbinding en voorkom je dat de kabels ruis opvangen. Zo hoor je geen ruis en maak je weloverwogen beslissingen over geluiden met hoge frequenties. Je hoort veel detail in de midden en hoge frequenties dankzij de ribbon tweeter. Door de gedetailleerde weergave hoor je precies waar je frequenties moet verwijderen en waar nog ruimte in de mix is.
ADAM Audio T5V Studio Monitor Single : Amazon.ca: Musical Instruments, Stage & Studio
A self-developed one-piece hybrid dome/cone design, offering the sonic advantages of both driver types, with minimal partial resonances.
SOLD | View similar gear
Der A7X ist einer der ausgewogensten und vielfältigsten Lautsprecher, die zur Zeit auf dem Markt sind - bestätigt durch unzählige Tests und Auszeichnungen.
With a 19-inch width, the horizontally oriented A44H can sit on a standard rack shelf or be mounted above or below a display. The completely new design also enables the A44H to serve as a center speaker in immersive and 3D speaker configurations. Dual 4-inch long-throw woofers and the X-ART tweeter deliver a wide frequency range, while onboard DSP-based tuning capabilities enable you to tweak the sound easily. German Handmade Precision X-ART Tweeter with rotatable HPS waveguid 2 x 4'' Woofer (Multi-Layer Mineral) Cumulated Amp. Power Peak: 130 W Frequency Response @ -6 dB: 46 Hz – 45 kHz Max. peak SPL per speaker at 1 m: 103 dB SPL
Bring unparalleled audio fidelity to your professional studio with the A8H Horizontal 8" 340W Powered Active 3-Way Studio Monitor. As the zenith of the A Series, this right-side studio monitor is engineered to deliver the exceptionally accurate and analytical sound that critical listening environments demand. Crafted for supreme monitoring, the A8H features a resonant 8-inch Multi-Layer Mineral (MLM) fiber woofer, a cutting-edge midrange driver, and a handcrafted precision X-ART tweeter. These components work in harmony to produce an ultra-wide frequency response, ensuring that every nuance of your audio is captured with utmost clarity. The A8H stands out with its innovative design, offering tremendous flexibility for sound customization. The rotatable High-frequency Propagation System (HPS) waveguide technology, paired with onboard DSP, allows for precise sound shaping, making it an ideal choice for a diverse range of audio applications in mid to full-sized spaces. Dive into the future of sound with ADAM Audio's pioneering technology. The A8H is equipped with a glass fiber polymer compound HPS waveguide, enhancing the X-ART tweeter's ability to disperse sound consistently across your listening space. The bass reflex system and robust cabinet design build upon the legacy of ADAM Audio's AX Series, ensuring durability and reliable performance. Experience the convenience of remote control with A Control software, which enables real-time adjustments over ethernet to all DSP-based functionalities of the A Series monitors. The hybrid amplification system merges the best aspects of digital and analog technologies, offering a powerful and dynamic audio experience. The A8H's Multi-Layer Mineral Woofer (MLM) represents the latest advancements in material science and acoustic design, delivering deep, impactful bass. The midrange driver is meticulously engineered to produce a clean sound in the critical frequency range, where human ears are most sensitive to sound coloration. Customize your listening experience with pre-defined "Voicings" on the back panel, including "UNR" and "Pure" selections, to match the unique characteristics of your audio projects. Additionally, four bands of room adaptation equalization Bass, Desk, Presence, and Treble allow for fine-tuning to the acoustics of your space. Harness the transformative power of digital signal processing with the A Series, offering precision tuning capabilities that surpass those of traditional analog-only speakers. With its powerful 340W amplification and professional-grade connectors, including RCA and XLR inputs, the A8H Horizontal Studio Monitor is a reliable, powerful, and aesthetically pleasing choice for audio professionals seeking the highest quality sound reproduction in their studio environments.
Algemeen Al jaren zijn de Adam T5V en Adam T7V populaire studiomonitoren. En dat is ook niet zo vreemd: Adam-kwaliteit voor een zeer scherpe prijs, en met een losse T10S subwoofer kon je er nog wat bottom-end aan toevoegen ook. Maar tegelijk zat iedereen ook een beetje te wachten op het magische getal 'acht', en daar is 'ie dan! De Adam T8V actieve studiomonitor is opnieuw een studiomonitor die de concurrenten pijn zal doen en waar wij weer een nieuwe lege hoek voor moeten zoeken in 't magazijn. Want ook deze T8V zal verkocht worden met de snelheid van warme broodjes, wat ook betekent dat wij er stapels van zullen hebben. Eigenschappen van de Adam T8V Cijfers! En ze liegen er niet om! Deze Adam gaat met 33 Hz de diepte in, en daarmee is 't een uitstekende monitor voor het zwaardere werk, zoals orkestmuziek en EDM. Die 33 Hz kun je zien als de ondergrens van de contrabassen en de lage E van een basgitaar. Als je puur naar de frequenties kijkt zou je dus eigenlijk geen sub meer nodig hebben, tenzij je echt wilde plannen hebt. Ook qua volume is 't dik in orde, met een maximale SPL (per set van twee) van 118 dB. Dat is meer dan wat je in een typische studio ooit nodig hebt. Over studio's gesproken, dit product mag heel aanlokkelijk zijn - en dat is 't ook - maar je hebt er een flinke studio voor nodig. Qua mixage zul je verheugd zijn dat deze Adam best een ruime sweetspot heeft, dat komt door een HPS-waveguide bij de ribbon-tweeter. Kortom, een topklasse monitor van Adam voor een onmogelijk lage prijs, bedoeld voor grote projecten in een grote studioruimte.
The A4V is a two-way speaker incorporating a 4-inch long-throw woofer made from the same Multi-Layer Mineral (MLM) fibers as other A Series speakers plus the classic X-ART tweeter. Onboard DSP-based tuning capabilities let you easily dial in the perfect sound for your space. With a frequency range of 52 Hz to 45 kHz, the A4V can accommodate a broad spectrum of audio applications—from producing podcasts to mixing string quartets—and will fit well within immersive and 3D setups. The DSP-based functionality of all A Series monitors can be controlled remotely and in real time over ethernet using A Control. The application can be downloaded free of charge for Windows and MacOS in the MyADAM user area upon registration of an A Series monitor. The backplate of A Series monitors offers a variety of equalisation and tuning options, but quite often the backplate is not accessible from the listening sweet spot. Using A Control you can make changes to these settings from the comfort of your sweet spot and be confident in your decisions. Made from a new glass fiber polymer compound, the A Series HPS waveguide enables the X-ART tweeter to disperse sound in space with controlled consistency. A Waveguide is a tapered recess that frames a tweeter to disperse sound in space in a more controlled manner. The A Series HPS (high-frequency propagation system) waveguide is constructed from resin and glass fibers, which are baked together under high temperatures to form a single piece that is specifically designed for X-ART dispersion characteristics. The waveguide is not easily excited by unwanted vibrations or resonances, contributing toward internal damping. A Series monitors feature a flared-port design that optimises airflow and reduces port noise. With every cubic centimetre accounted for, the industrial inspired design can provide lower extension and higher efficiency in a smaller box. The cabinets have deeper bevelling to further reduce diffraction and thicker baffle walls to reduce unwanted cabinet vibrations. A Series speakers are designed to be adaptable to changing requirements, preferences, and environments. For many people, the environments in which they create music are multipurpose, doubling as a bedroom or living room where acoustic treatment is often not an option. Using A Control, you can push advanced filters directly to an embedded platform onboard the monitors to help compensate for imperfect room acoustics, and this platform supports filters from industry leaders Sonarworks. Using Sonarworks SoundID Reference software and a measurement mic, you can create calibration curves specifically for your room and run them directly on your A Series monitors. Features Includes an extended 60-day SoundID Reference trial for existing and new A Series customers German Handmade Precision X-ART Tweeter with rotatable HPS waveguide 4" Woofer (Multi-Layer Mineral) Cumulated Amp. Power Peak: 130 W Frequency Response @ -6 dB: 52 Hz - 45 kHz Maximum SPL per speaker at 1 m: 100 dB SPL Display: Front panel multi-colour LED Cabinet Design: Dual front ported Cabinet Material: Vinyl wrapped MDF and painted MDF front panel Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8) Power consumption (max, idle, sleep): 220 W, 10 W, 3.5 W AC Input Voltage: 100 – 240 V, 50/60 Hz Power Rating: 300 W max. Operating Conditions: -10° C to +45° C (+14° F to +113° F); <75 % RH, non-condensing Weight: 5.8 kg (12 lbs 13 oz) Dimensions (Height x Width x Depth): 268 mm x 158 mm x 220 mm (10 1/2? x 6 1/4? x 8 5/8“) Warranty: 5 years (2 years warranty plus 3 years optional with product registration) Delivery Contents: A4V loudspeaker, power cable, Quick Start Guide Analog: XLR, RCA Input Impedance: 9 kOhm / 3.3 kOhm Max. Input Level: +19 dBu For more information, please visit the manufacturer's website.
The Adam Audio T8V 8 inch powered studio monitor is an affordable, professional 2-way powered studio monitor with an 8-inch woofer and Adam Audio's latest addition to the T series. Designed around the same technology, features, and build quality as its smaller siblings, the T8V provides best-in-class characteristics and sound performance. The T8V is the perfect studio speaker for those who have always wanted to work with an 8-inch monitor from Adam Audio, but where budgets have been insufficient. The U-ART's 4:1 velocity transfer ratio, in combination with the new Class D amplifier's high dynamic range, yields respective max peak SPL of 118 dB per pair. The tweeter, which extends up to 25 kHz, works as a team with the HPS waveguide. This allows optimal radiation of the high frequencies, which means the advantage of a more controlled, larger usable sweet spot during monitoring. With a bass extension down to 33 Hz, the T8V is especially suitable for users who produce bass-heavy music. The new U-ART 1.9-inch accelerated ribbon tweeter, as used in the T Series, is made of a high-tech polyimide film and provides pristine and extended high-frequency response up to 25 kHz, virtually unheard of in monitors in this price range, and a breakthrough solution for use in high-resolution recording and mixing on a budget. Unlike a conventional dome or cone tweeter that uses a piston action to move air and reproduce sound, the U-ART tweeter uses a pleated ribbon that alternately draws air into its folds and squeezes it out as the folds respectively expand apart and press together in response to the inputted audio signal. This design produces four times as much air movement as does a piston-based design, creating higher sound pressure levels (SPLs) with lower distortion. The HPS (High-frequency Propagation System) waveguide was initially designed at Adam Audio for the S-ART tweeter of the S series range with the aid of the latest computer modeling techniques. It hones the dispersion of the speakers to an even, uniform consistency, broad on the horizontal axis but tightly focused in the vertical. These cables feature two 20-gauge CCAM conductors, which are twisted-pair with cotton yarn fillers, conductive PVC shields with 100% coverage, and CCAM spiral shielding with 90% coverage. Knox Gear Studio monitor isolation pads are designed for use speakers up to 8 inches. These laser-precision acoustic pads ensure the best listening experience possible. Knox Gear Studio monitor isolation pads may be configured in multiple ways flat, tilt-up, and tilt-down positions. These varying positions allow for a better acoustic environment by enabling the speakers to be pointed directly at the listener you get a cleaner sound. Made of high-quality premium acoustic foam, the pads reduce unwanted vibrations and low-end distortion.
Transformative feedback for recording, producing, or mixing – Whether you are creating music, editing your next podcast, tracking guitar, or composing for film, the revealing nature of ADAM Audio’s signature tweeters and woofers will enhance your sound. High resolution audio designed in Berlin – The HPS waveguide and U-ART tweeter combine to deliver detailed sound across the high frequency spectrum. Adjustable to fit your room – A beveled cabinet with a rear-firing bass reflex port allows placement anywhere, even with limited space. High- and low-shelf DSP-based filters allow for optimal adaptation in acoustically difficult listening environments. Plug and play it loud - Multiple analog connections give you the flexibility to integrate various soundcards and home audio devices. Extend your low end with ADAM Audio’s T10S subwoofer, which is perfectly matched to work best with the T5V and T7V studio monitors. Accurately monitor the low frequencies with precision to guarantee you make the best choices in your mix.
Algemeen Deze Adam Mounting Bracket is een bevestigingsbeugel voor ADAM S2V studio monitors. Met deze beugel en de bijhorende Adam Adapter Plate bevestig je je S-serie studio monitoren aan de wand- of plafond-beugel uit dezelfde reeks.Het systeem biedt je de mogelijkheid je monitors te kantelen in de gewenste stand. en duurzaam staal en een stevige zwarte coating garanderen de kwaliteit en betrouwbaarheid ervan. Gepaste kwaliteit natuurlijk, voor de kwaliteit-speakers die je er mee bevestigd. Tips of opmerkingen over dit product De wand- of plafond-beugel en adapterplaat die samen met dit product de bevestiging vormt voor de S-serie studio monitor wordt niet meegeleverd in deze order. Om deze producten samen te bestellen - bekijk bij onze bundels de voordelige mogelijkheden.
The T5V is a highly affordable two-way nearfield monitor and optimized for small control rooms. With its 5” woofer the bass-frequency response of the T5V extends to 45 Hz. The new U-ART tweeter, a breakthrough solution for use in high-resolution recording and mixing on a budget, goes up to 25 kHz and is mated to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working. A beveled cabinet with a rear-firing bass reflex port and a small footprint allows placement anywhere in your room, no matter how small, and contains built-in DSP-controlled driver crossovers and equalization as well as multi-way analog connections. Powered with a 50 W Class D amplifier for the woofer and a 20 W Class D amplifier for the U-ART tweeter, the T5V produces SPLs of up to 106 dB per pair. Excellent acoustic characteristics, small dimensions and an outstanding cost/performance ratio make this studio monitor perfectly suited for use in small control rooms in music, video and broadcast production. If you need to hear more bottom end, the T5V is compatible with the ADAM Sub7 and Sub8 subwoofers. TECHNICAL DATA WOOFER Number 1 Basket Ø 5" (127 mm) Cone Material Polypropylene TWEETER Number 1 Type U-ART Diaphragm Area 4 inch² (2420 mm²) Equiv. Diaphragm Ø 1.9" (48 mm) Velocity Transform Ratio 4:1 Diaphragm Weight 0.17 g Waveguide HPS BUILT-IN AMPLIFIERS Number 2 Woofer 1 Type PWM Amp. Power RMS 50 W Tweeter 1 Type PWM Amp. Power RMS 20 W CONTROL OPTIONS Input Sensitivity Switchable +4 dBu / -10 dBV Gain Yes High-Shelf - 2 dB, 0 dB, +2 dB Low-Shelf - 2 dB, 0 dB, +2 dB INPUT CONNECTORS Analog XLR, RCA Input Impedance 10 kOhm / 20 kOhm GENERAL DATA Panel Rear Frequency Response 45 Hz - 25 kHz THD > 80 Hz 0.5 % Max. SPL per pair at 1 m ≥106 dB Crossover Frequency 3 kHz Max. Power Consumption 132 W Weight 12.6 lbs (5.7 kg) Height x Width x Depth 11.7" x 7" x 11.7" (298 mm x 179 mm x 297mm) Warranty 5 years (2 years warranty plus 3 years optional with product registration) Delivery Contents Power cord, Quick Start Guide
\nDesigned for small studio spaces, short listening distances and immersive multi-speaker configurations, the ADAM Audio A4V delivers accurate, full-bodied sound in a compact form factor. This two- way speaker incorporates a 4\" long-throw woofer made from the same Multi-Layer Mineral (MLM) fibers as other A series speakers plus the classic X-ART tweeter. Onboard DSP-based tuning capabilities let you easily dial in the perfect sound for your space. With a frequency range of 53Hz to 42kHz, the A4V can accommodate a broad spectrum of audio applications—from producing podcasts to mixing string quartets—and will fit well within immersive and 3D setups. \n \nWith five models of varying dimensions and specifications to choose from, finding the right speaker is simply a matter of taste and understanding the acoustic requirements of your space. For added flexibility when it comes to speaker positioning, the rotatable HPS waveguide means each speaker can be used in a horizontal or vertical position with minimal compromise in sound quality. Room adaptation options directly on the backplate of the monitor help address common speaker placement issues, such as bass overrepresentation caused by nearby walls and surfaces.\n\n\nSuperior audio performance\n\n\nEvery aspect of the A series’ design, material and components contributes toward exceptional sound quality and improved output when comparing similar models of the preceding AX series. \n \nThe combination of Class-D amplifiers used in A series woofers, and the Class-AB amplifiers found in the tweeters deliver impressive SPL across the range and an ultralow frequency response. The use of digital signal processing enables the more advanced features found in the A series. \n \nAll A series speakers come equipped with an X-ART tweeter enclosed in a tailor-made HPS waveguide. The high quality of the tweeter materials, folded by hand in Berlin, combined with the precise propagation control of the waveguide, results in superior dispersion of high frequencies over short and long listening distances. \n \nA series woofers are constructed from multiple layers of mineral stone fibers baked together to create a lightweight but highly stable material that helps eliminate partial vibrations and other sonic impurities. By combining that material with a new magnet system, A series woofers produce high output with low distortion, delivering a clean sound for low-end material. \n \nThe elegant design of A series cabinets also contributes toward superior audio performance. Specifically, the cabinets have deeper beveling to minimize diffraction, and thicker baffle walls that reduce vibrations within the enclosure. In addition, a flared-port design reduces port noise compared with AX series speakers by optimizing airflow.\n\n\nTruthful mixing\n\n\nThe A series features two selectable voicing options found directly on the back panel of the monitors. \"Pure\" is a highly accurate and neutral sounding option. This is a super flat setting, offering an honest representation from your speakers and making it ideal for mixing, mastering and critical listening applications.\n\n\nSound with character\n\n\nThe A series also offers the characterful and present sound you would expect from ADAM Audio. “UNR” or \"Uniform Natural Response\" is a dynamic, natural-sounding voicing that is selectable on the back panel of the monitors. Its design stems from a variety of iconic ADAM Audio legacy products, including the preceding AX series. It lends itself to production, composition and song writing as its engaging sound can give you more room for creativity and flow. It is also a great option whenever you want to use your speakers simply to enjoy some good music.\n\n\nCompensate for less-than-perfect acoustic space\n\n\nFor many people, acoustic treatment is not an option due to the cost and complexity involved or because they use their speakers in a living room or
QUALITY COMPACTED The A4V is a two-way speaker incorporating a 4-inch long-throw woofer made from the same Multi-Layer Mineral (MLM) fibers as other A Series speakers plus the classic X-ART tweeter. Onboard DSP-based tuning capabilities let you easily dial in the perfect sound for your space. With a frequency range of 52 Hz to 45 kHz, the A4V can accommodate a broad spectrum of audio applications—from producing podcasts to mixing string quartets—and will fit well within immersive and 3D setups. German Handmade Precision X-ART Tweeter with rotatable HPS waveguide 4'' Woofer (Multi-Layer Mineral) Total Peak Amp. Power: 130 W Frequency Response @ -6 dB: 52 Hz - 45 kHz Maximum SPL per speaker at 1 m: 100 dB SPL
Brand ADAM Audio Model T7V 7" Active Studio Monitor (Single) Finish Black Year 2010s Categories Studio Monitors
The A77H is a true three-way midfield monitor that capitalizes on the latest ADAM Audio technologies to deliver a rich, spacious, and enveloping sound. Incorporating two 7-inch woofers, a midrange driver, and ADAM Audio’s X-ART tweeter, the A77H delivers an ultra-wide frequency range. The addition of the midrange driver helps produce clear sound in the most sensitive range of human hearing. Rotatable HPS waveguide technology and onboard DSP allow you to tune the sound for your precise requirements. German Handmade Precision X-ART Tweeter with rotatable HPS waveguide 3.5" DCH Midrange Driver 2 x 7'' Woofer (Multi-Layer Mineral) Cumulated Amp. Power Peak: 340 W Frequency Response @ -6 dB: 34 Hz – 45 kHz Max. peak SPL per speaker at 1 m: 106 dB SPL
ADAM AUDIO A44H ENCEINTE DE MONITORINGL’A44H est une alternative plus compacte à l’A7V de la Série A, mais elle offre les mêmes performances et caractéristiques. Avec seulement 48 cm (19 pouces) de largeur, l’A44H est orientée à l’horizontale et peut être installée sur une étagère de rack standard ou fixée au-dessus ou en dessous d’un écran. Ce tout nouveau design permet également d’utiliser l’A44H comme une enceinte centrale au sein de configurations immersives ou multicanales. Deux woofers à longue excursion de 4 pouces et le tweeter X-ART reproduisent une large plage de fréquences, tandis que le DSP intégré vous permet de modifier facilement le son. Guide d’ondes HPS pivotant & tweeter X-ARTLa technologie de guide d’ondes HPS (High-Frequency Propagation System, ou Système de propagation des hautes fréquences) d’ADAM Audio permet de projeter le son de façon plus homogène, large à l’horizontale mais plus resserrée à la verticale. La Série A inaugure un guide d’onde HPS pivotant. Vous pouvez faire pivoter les tweeters de la Série A à 90 degrés, tout en continuant de profiter de la technologie de guide d’ondes HPS, que vous installiez vos enceintes verticalement ou horizontalement. Le guide d’ondes HPS de la Série A est fabriqué à partir d’un nouveau composé polymère en fibres de verre, qui contribue à créer un son net, sans aucune résonance indésirable. Le tweeter X-ART d’ADAM Audio se trouve au centre du guide d’ondes HPS pivotant. Fabriqué à la main en Allemagne, le tweeter X-ART offre une réponse transitoire précise et reproduit les plus infimes détails sonores. Ce tweeter X-ART est utilisé dans chacune des enceintes de la Série A afin d’offrir un son précis sur tous les modèles de la gamme.Woofer en fibres minérales multicouchesLes woofers de la série A sont fabriqués à partir d’un mélange spécifique de fibres de roche minérale cuites ensemble afin de créer un matériau léger, mais extrêmement stable. La composition minérale, l’empilage et la géométrie de chaque cône est spécifique au haut-parleur utilisé dans chaque modèle. En combinant ce matériau au nouveau système d’aimant, les woofers de la Série A produisent un niveau de sortie élevé, avec très peu de distorsion, afin d’obtenir des graves nets. Amplification hybrideLa Série A combine le meilleur des mondes numérique et analogique. Les woofers sont alimentés par des amplificateurs de classe D, lesquels contribuent à produire des performances linéaires tout en réduisant la distorsion. Ces amplificateurs ont été choisis spécifiquement pour leur puissance et leur rendement, tant en termes de consommation électrique que de reproduction sonore. Une dissipation thermique moindre permet d’utiliser un radiateur plus petit, ce qui facilite l’investissement supplémentaire dans la puissance et les performances exceptionnelles des modèles de la Série A. Les tweeters et les haut-parleurs médiums sont alimentés par des amplificateurs de classe AB, lesquels reproduisent les hautes fréquences de façon douce et naturelle. Chaque amplificateur est optimisé pour sa plage d’opération. Il en résulte une enceinte réglée finement et correctement alignée. Pour y parvenir, ADAM Audio a procédé à de nombreuses mesures et séances d’écoute, testant un nombre incalculable d’amplificateurs et de composants d’amplification. Électronique à DSP et Adaptation à la pièceLa Série A profite de la capacité d’évolution d’une électronique à DSP afin de proposer des enceintes réglables avec davantage de précision et plus stables que leurs homologues purement analogiques. Grâce au firmware qui peut être mis à jour au moyen d’une connexion Ethernet, vous pouvez vous attendre à intégrer les futures avancées d’ADAM Audio en matière de DSP, notamment de nouvelles fonctionnalités et types de filtre, ainsi que des voicings supplémentaires. À l’arrière des enceintes de la Série A, vous trouverez quatre bandes d’égalisation dédiées à l’adaptation à l’espace d’écoute : Bass, Desk, Presence et Treble. Chaque bande est réglable par paliers ; vous bénéficiez ainsi d’une centaine d’options pour vous aider à compenser les problèmes acoustiques typiques survenant lors du placement des enceintes.VoicingsUn Voicing est un profil sonore prédéfini des enceintes de la Série A. Vous trouverez à l’arrière trois options distinctes, UNR, Pure et Ext, sélectionnables à l’aide d’un commutateur. UNR ou Uniform Natural Response (Réponse naturelle uniforme) est une courbe de réponse naturelle et dynamique conçue par ADAM Audio et qui s’inspire de différents produits historiques et mythiques d’ADAM Audio, y compris la précédente série AX. Il est adapté à la production et à la composition, car la présence et le charme de son timbre laisse davantage de place à la créativité et à l’inspiration. C’est aussi une très bonne option quand vous voulez simplement utiliser vos enceintes pour écouter de la musique par plaisir. Pure est une option qui permet d’obtenir un son très précis et neutre. C’est le réglage plat, idéal pour le mixage et le mastering, quand vous avez vraiment besoin d’entendre tous les détails et de vous appuyer sur une représentation fidèle. Le voicing Ext est dédié aux fonctionnalités avancées offertes par le logiciel A Control via la connexion Ethernet. Logiciel A Control (Contrôle distant en temps réel)Les fonctionnalités du DSP de toutes les enceintes de monitoring de la Série A peuvent être contrôlées à distance et en temps réel via Ethernet à l’aide du logiciel A Control. Les personnes qui ont enregistré leurs enceintes de la Série A peuvent télécharger gratuitement le logiciel A Control pour Windows et MacOS depuis leur espace MyADAM sur www.adam-audio.com. Une fois le logiciel téléchargé et installé, vous pourrez contrôler plusieurs enceintes à la fois, en réglant précisément l’égalisation depuis différentes positions d’écoute dans votre studio. Vous pourrez contrôler les niveaux des enceintes à distance pendant que vous travaillez, si vous êtes loin d’un fader ou d’une interface physique. Les capacités de contrôle distant sont particulièrement pratiques dans les pièces multiusages. Elles garantissent que le voicing, l’égalisation et d’autres paramètres sont réglés exactement comme vous le souhaitez.Correction de pièce & intégration de SonarworksLes enceintes de la Série A sont conçues pour s’adapter aux changements de configurations, préférences et environnements. À l’aide du logiciel A Control, vous pouvez gérer des filtres avancés directement au sein d’une plateforme intégrée aux enceintes de monitoring, et ainsi compenser une acoustique imparfaite. Cette plateforme intégrée prend en charge les filtres de l’entreprise leader Sonarworks. En utilisant le logiciel de Sonarworks et un micro de mesure, vous pouvez calibrer vos enceintes pour les adapter à une nouvelle pièce, ou à de nouvelles préférences.Caractéristiques :- Woofer : 2 woofers MLM de 4"- Ø de la bobine mobile du woofer : 25 mm / 1”- Conversion AN : 24-bit- Fréquence d'échantillonage interne : 96 kHz- Puissance d'amplification RMS : 110 W (Woofer) + 20 W (Tweeter)- Fréquence de crossover : 2,4 kHz- Puissance nominale : 300 W max- Entrées analogiques (symétriques) : 1x XLR- Entrées analogiques (asymétriques) : 1x RCA- Inclus : Câble d'alimentation et guide d'utilisation rapide- Garantie : 5 ans si enregistrement du produit en ligne- Dimensions : 432 x 350 x 135 mm- Poids : 9,7 kg- Prix pour une enceinte
