How to Build Eclipson Model T - 3D Printed LW-PLA Rc AirplaneIn this video we will show you how to make a Eclipson Model T Rc Airplane Using Esun Lw-Pla. Use...

Fokker Dr.IWWI fighter modelsDownload and then "fly to sky".Make by Blender 2.79bRender : CycleVisit my IG: https://www.instagram.com/panzer

Landing Gear with suspension!!!These can be used for Tricycle Style or a Tail Dragger. For Dampeners, you can use elastic bands and adjust them to you

Template F22-70cm - Google Drive

3D printed RC planes

The 3D printable Foka 4 with a wingspan of 2000 mm is an original replica of the Polish glider SZD-24 Foka from 1962. 3d print your one rc airplane! Planeprint develops 3d printable rc planes and makes them available for you. Download the stl files and print your own rc plane. Planeprint – Aircraft for pilots

Note the strengthening, incidence holes and servo plug mount

3d print your one rc airplane! Planeprint develops 3d printable rc planes and makes them available for you. Download the stl files and print your own rc plane. Planeprint – Aircraft for pilots

3D Print Objects of Aircraft, Humanoid and other Miniatures

HEre's a test piece of the fuselage of the EL-39 electric jet. It's a big plane, so it needs a big printer to print. I use a 305x305 area JGAurora A5 to print mine. Here's the full plane: https://cults3d.com/en/3d-model/various/el-39-semi-scale-rc-jet-for-120-mm-edf

The Planeprint Aermacchi mb-339 is a 3D printable EDF jet for a 70 mm EDF. 3d print your one rc airplane! Planeprint develops 3d printable rc planes and makes them available for you. Download the stl files and print your own rc plane. Planeprint – Aircraft for pilots

I was adding ailerons to my GWS Slow Stick and needed a control horn. There are some here on thingiverse but they are all one-piece and have weakness

Discover how Jonatan Domènech Arboleda designed and 3D printed the Barcelona UAV, a 100% 3D printed model airplane. Download the files and print your own!

3D printed RC planes

54 mm diameter tire and only 8 grams when fully assembled. This is designed primarily for RC planes but can be used with anything. The tire is TPU

Li-ion battery 3S2P, cell 21700. Dimensions: 52x74x92 mm For control, BMS HW-288 is used. To connect the central posts, screws 2.5x16mm (4 pcs) are used. Bottom screwed through the bottom cover. From above through the upper battery clip. The top cover is fixed with 2.5x8mm screws (4pcs). The connector for your choice, I used the XT-60. It is better to use heat-resistant plastic for printing. I used SBS. The battery temperature can exceed 50-60 degrees.

Hello everybody !I would like present you the GASB Two"The first fan jet fully printed ! The most printed jet in the world !"Hundreds of peo

An easy to fly canard glider in dogecoin livery takes you to the moon in comfort and style! A spaceship themed glider that flies as good as it looks

This is a remix of a model by DigitalTargeter with some improvements:Wheel and tire are separate partsRemoved "webbed feet" from fuselage ha