This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4wd; providing 4 of lift height. Features: New nodular iron knuckles, not ball joint spacers Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing Full-width differential/control arm crossmembers provide lateral rigidity Rear lift achieved via blocks Front / rear Superide shocks included Heavy-duty replacement front driveshaft available The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.NOTE: FX4 models require optional Rear U-bolt Kit part #10914. This is a complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4WD Provides 4 of lift Includes rear blocks, front and rear Superlift shock absorbers All brackets, shocks, steering knuckles, crossmembers, rear block and u-bolt kit, and all hardware required specific to the 1998-1999 or 2000-2010 4WD Ford Ranger. Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation Product Fits These Vehicles 2000-2011 Ford Ranger Vehicle Fitments: Year Make Model Submodel 2008 - 2011 Ford Ranger Base 2001 - 2005 Ford Ranger Edge 2000 - 2002 Ford Ranger EV 2005 - 2009 Ford Ranger FX4 2006 - 2010 Ford Ranger Limited 2002 Ford Ranger Postal 2002 - 2011 Ford Ranger Sport 2005 - 2007 Ford Ranger STX 2004 Ford Ranger Tremor 2000 - 2011 Ford Ranger XL, XLT
This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4wd; providing 4 of lift height. Features: New nodular iron knuckles, not ball joint spacers Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing Full-width differential/control arm crossmembers provide lateral rigidity Rear lift achieved via blocks Front / rear Superide shocks included Heavy-duty replacement front driveshaft available The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.NOTE: FX4 models require optional Rear U-bolt Kit part #10914. This is a complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4WD Provides 4 of lift Includes rear blocks, front and rear Superlift shock absorbers All brackets, shocks, steering knuckles, crossmembers, rear block and u-bolt kit, and all hardware required specific to the 1998-1999 or 2000-2010 4WD Ford Ranger. Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation Product Fits These Vehicles 2000-2011 Ford Ranger Vehicle Fitments: Year Make Model Submodel 2008 - 2011 Ford Ranger Base 2001 - 2005 Ford Ranger Edge 2000 - 2002 Ford Ranger EV 2005 - 2009 Ford Ranger FX4 2006 - 2010 Ford Ranger Limited 2002 Ford Ranger Postal 2002 - 2011 Ford Ranger Sport 2005 - 2007 Ford Ranger STX 2004 Ford Ranger Tremor 2000 - 2011 Ford Ranger XL, XLT
Description Note: Fx4 Models Require Optional Rear U-bolt Kit Part #10914. Features: New Nodular Iron Knuckles, Not Ball Joint Spacers Load Bearing Bracketry Made Of .25" Thick Plate Steel Or Heavy-wall Tubing Full-width Differential/control Arm Crossmembers Provide Lateral Rigidity Rear Lift Achieved Via Blocks Front
This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4wd; providing 4 of lift height. Features: New nodular iron knuckles, not ball joint spacers Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing Full-width differential/control arm crossmembers provide lateral rigidity Rear lift achieved via blocks Front / rear Superide shocks included Heavy-duty replacement front driveshaft available The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.NOTE: FX4 models require optional Rear U-bolt Kit part #10914. This is a complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4WD Provides 4 of lift Includes rear blocks, front and rear Superlift shock absorbers All brackets, shocks, steering knuckles, crossmembers, rear block and u-bolt kit, and all hardware required specific to the 1998-1999 or 2000-2010 4WD Ford Ranger. Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation Product Fits These Vehicles 2000-2011 Ford Ranger Vehicle Fitments: Year Make Model Submodel 2008 - 2011 Ford Ranger Base 2001 - 2005 Ford Ranger Edge 2000 - 2002 Ford Ranger EV 2005 - 2009 Ford Ranger FX4 2006 - 2010 Ford Ranger Limited 2002 Ford Ranger Postal 2002 - 2011 Ford Ranger Sport 2005 - 2007 Ford Ranger STX 2004 Ford Ranger Tremor 2000 - 2011 Ford Ranger XL, XLT
Description Note: Fx4 Models Require Optional Rear U-bolt Kit Part #10914. Features: New Nodular Iron Knuckles, Not Ball Joint Spacers Load Bearing Bracketry Made Of .25" Thick Plate Steel Or Heavy-wall Tubing Full-width Differential/control Arm Crossmembers Provide Lateral Rigidity Rear Lift Achieved Via Blocks Front