This weekend I figured out how to do something that will change my life forever! And I am not exaggerating! I successfully hemmed two pairs of jeans without having to lose the original hem, resulting in jeans that DON'T look like they have been altered! At 5’2” there are very few times that I put on a pair of jeans and they fit perfectly. They are almost always way too long. Over the years I have tried to fix pants by cutting length off and making a new hem, only to have it look so obvious. Sure, a tailor is an option, but adding that extra cost is less than desirable, and I always felt like this was something I should learn to do myself. I recently found a pair of jeans that I loved and couldn’t pass up, but were definitely going to need to be hemmed. Days later I happened upon a tutorial on how to keep the original hem, so I felt like it was as good a time as any to try this out. It worked beautifully and I am not sure there are words that express how exciting this is!! For all of you other short friends of mine, here is the lowdown: Put on the pair of jeans and roll up the cuff to the desired length. Pin it in place. Take the jeans off and measure the length, but do not include the hem in the measurement. Divide that measurement in half and this is the number you will use to pin the final sewing length. For example, I rolled mine up about 4.5 inches (I told you I was short!) and the original hem was about ½ inch. So I was really only working off of 4 inches. I divided that number in half and was left with 2 inches. I moved the amount rolled up, down to 2 inches and pinned it there. Using a thread that matches your jean color, you then stitch right underneath the hem. Try them on before you cut off the excess fabric to double check that the length is correct. Once you cut the extra folded fabric off, iron the hem down. It will barely be visible that there is a seam above the hem, and who looks that closely anyway?! Top shows the original amount that I rolled up (the 4.5 inches), and the bottom shows the amount divided in half and pinned (2 inches) Measuring and pinning around the whole hemline Stitch right below the original hem Finished stitching Cut the excess fabric off Finished! You can't even tell they have been altered!