Once purchased please email your PNG to: sales [!at] smarterblanks.co.uk Printed inhouse in the United kingdom . We have a fast turn around time, don’t wait weeks for an overseas order. Our UV DTF transfers are great for wraps, The transfers will come ready to apply without use of a heat press or shrink wrap! Simply apply, smooth out, and peel film. Although these are not dishwasher safe, with a simple hand wash these permanent, waterproof, glossy finish transfers will be long lasting! You will only receive gang sheet/s. NO physical glass/cup is included. The best files to print are in a PNG format and at least 300 dpi. * Permanent and waterproof * High-quality print * Apply to most hard surfaces * Size - 16oz wrap - approx. 24.55 x 11.18 What is UV DTF? Ultraviolet (UV) DTF Printing refers to a new printing method that uses ultraviolet curing technology to create designs on films. These designs can then be transferred like a sticker onto hard and irregular-shaped objects by pressing down with fingers and then peeling off the film. The colour of the design is bright and clear, and after the transfer, it is durable and does not scratch or wear off quickly. It is also suitable for outdoor objects as they are durable and resistant to scratch and wear over time. UV DTF printing is versatile due to the type of surfaces the designs can go on, such as metal, leather, wood, paper, plastic, ceramic, glass, etc. It can even be transferred onto irregular and curved surfaces. It is also possible to transfer designs when the object is underwater. Instructions for applying UV DTF wraps: Use a squeegee or scraper and firmly scrape the front of the UV DTF print to make sure the print has adhered to the transfer film Clean your blank substrate (item to be applied onto) with isopropyl alcohol Check to ensure the wrap fits your substrate and please ensure you position it properly as the wrap cannot be moved/ removed once applied. Remove the white backing by curling it back against itself- go slow and do not rush. Place the transfer film on your substrate in the correct position. Rub over the entire transfer paper again and once you are confident that all the air bubbles have been removed, gently peel off the clear transfer film by curling it back against itself - go slow and do not rush. Rub over the substrate to check the image has been fully applied and stuck down. Care instructions: Hand wash only, do not soak or put in the dishwasher Let the UV DTF wrap cure for a minimum of 48 hours before using