Merry and Bright Sublimation Transfers REQUIRE: A Heat Press Products that are at least 60% Polyester or are made for Sublimation HEAT TRANSFER PRECUTS Our Custom Printed PreCut HTV (Heat Transfer Vinyl) is printed on printed on Siser ColorPrint™ PU Matte which give our Pre Cut designs a vibrant full color matte finish and is soft to the touch. These design are not sublimation therefore they can be applied to Cotton, Lycra, Polyester, Tri-Blends and much more. T The Custom Pre-Cut design will require using Siser TTD Easy Mask for application.Application Weed Excess material Mask with Siser TTD Easy Mask Preheat garment for 2-3 seconds Apply design at 315 °F Apply medium pressure for 12-15 seconds Peel Carrier hot Care Instructions: Do not dry clean; Machine wash cold / mild detergent; Dry at normal setting; No chlorine bleach; Wait 24 hours before first wash Certification: CPSIA Certified Specifications: PU composition; Polyester Backing; Matte finish; 70 Microns / 2.8 Mils; 45°/60° blade Applies To: Cotton, Lycra, Polyester, Tri-Blends and much more DTF Digital Prints Custom printed heat transfer for light and dark garments, bags, caps, face masks, and more! No minimum quantity and no limitations on color. You can apply our digital transfers to any color garment (cotton, cotton/poly blends, 100% polyester, nylon, silk, leather, and denim). <<>> NOT a Cricut Easy Press Please note that these transfers need to be applied using a HEAT PRESS OR HAT HEAT PRESS. The heat transfers will NOT ADHERE PROPERLY WITH A REGULAR IRON OR CRICUT EASY PRESS. Finishing sheet(s) and detailed instructions with helpful tips for a successful transfer will be provided. As long as your heat press has good pressure and maintains a consistent temperature across the platen, you should be good to go! Please note this is COLD PEEL!!!!! Washing Instructions!! Digital prints are durable but will fade if not laundered properly. So it’s especially important to launder with care. Turn inside-out before washing and drying. Machine-wash in cold water only. NO FABRIC SOFTENER Lay flat to dry & avoid machine drying. Tumble dry low heat if machine drying is required. Do not iron the imprint.