Last summer I bought a pretty amber-colored jar at a flea market. It made start wondering how to paint glass amber colored to use in displays. I thought there would BE an amber color in the glass paint selections at craft stores but there is not. My thought was that for a Fall look amber bottles would look nice mixed with the green bottles that I have displayed on a baker's rack that I have in my carport. You have to walk through the carport to get to the back door at my house. Most folks that come to my house to visit seem to come in through the back door so I like to have a seasonal display there. I didn't get the display finished before the sun went down so I had to aim the car lights onto the display to have any light on it...not the best photos...sorry! To make the green and amber bottles have a Fall-ish look, I used a dot of hot glue to secure a faux Fall fruit on each bottle to make like a bottle topper. I think the faux fruit will just pop right off when it is no longer needed. I ended up with too many bottles for the baker's rack so I make another little display in the kitchen too. OK above is the finished bottles for those who only want to see a finished vignette. If you want to keep reading, you can see the different products and techniques that were used to try to get the amber bottle look. Here are the bottles that I started the experiment with: I ended up with more bottles since I had a hard time getting the amber look that I wanted and more bottles got called into action for the attempts. Some are $1 bottles from Michael's, empty food containers and thrift store finds. Back when I was making a faux stained glass window, I used some Martha Stewart's "fill paint" on it. In researching how to use it for the window, I also saw a video on how to use the fill paint to color bottles. I bought the fill paint in orange and brown because the orange was TOO orange to look like amber to me. I followed the directions and put painter's tape on the bottom of the bottles. That was a time consuming step that I did not do with other paint techniques that I tried. The tutorial tells you to let the paint drip down the bottle. You are supposed to drizzle more paint at the points where the paint did not drip you have the whole bottle covered. My thought was to put a layer of orange fill paint on the bottle and then follow with the brown. I wasn't sure if I was going layer the colors while the paint was wet or let one layer dry and then add another color on top. Last bottle on right is painted with a homemade concoction of glue/food color/water mix. In the end, it didn't matter because the fill paint, while it was great on the faux stained glass window (where it was used on a horizontal surface and allowed to pool and dry), was too transparent for the look I was after. Orange fill paint bottle on left, brown fill paint on the right. If you would like a hint of color on a bottle, it would be fine. Not one to waste all the paint that dripped off of the bottle, per the instructions, I brushed the excess paint on other bottles to see what that would look like. There are other Martha Stewart paints I wanted to try also but until I could get to the craft store, I tried another method to paint bottles that I had seen on the internet... using glue (use glue that will eventually dry clear), food coloring and some water to make the glue mix brushable. I tried the orange food coloring...it was too orange for amber. With no brown food coloring on hand, I added a few drops of purple to the orange and glue mix. It turned green. I brushed it on a bottle anyway. When it dried, it wasn't too bad of a color! This concoction had a matte finish. I wanted it to be a more shiny finish...some instructions for this method say you can make it shiny by adding varnish but I didn't have any of that either. When I did get to the craft store, I got some more of Martha's paints to try. The "gloss paint" was glossy but it made the bottles opaque...also not the look I wanted. The MS transparent paint is very transparent when it dries... it really didn't have enough color for this Fall look. If you want a hint of color on your bottles for a lighter look it works well. While I was at the craft store, I also treated myself to some real Mod Podge in case the Martha paints did not work. I got the glossy version since I wanted shine on the bottles. Click on this link at the Gingerbread Snowflakes blog to see a tutorial on using the matte Mod Podge and food coloring to paint bottles. Another thing that did not work (most of this post is about what did not get the look I wanted to save you the time and money of trying all this stuff yourself if you want amber bottles) is the tube of decorating gel. It did not have enough color to change the Mod Podge. I had to go back and get the more concentrated brown food coloring in a little pot. It is also says " gel". Maybe the "decorating gel" goes directly on the food product without mixing? The brown gel in the pot is thicker than the food coloring in the little bottles but either of those worked fine in tinting the Mod Podge for painting bottles. Go heavy on the orange food coloring and light on the brown to get the amber color. A "fan" brush is best for applying the mix to the bottles...it gives the least brush strokes. As the original Mod Podge tutorial noted, this method is not the best for glass that is going to be outside because the products used are water soluble. To try to make the amber finish that I finally was kinda happy with (or did my standards drop with each failed attempt?) more permanent, I did try baking the bottles in the oven on low heat. I wasn't sure how the Mod Podge bottles would react. The Martha Stewart site says to put the bottles in the oven before you start to heat it so that the bottles warm gradually. If you put tape on the bottom of the bottles, pull it off before baking...life lesson. I just put the oven on 250 degrees. The bottles only cooked about 10 minutes before they gave off a fume so I just took them out then. It did seem to make the bottles less tacky. Another solution to keep the finish that you have worked hard to achieve, I found in researching on the internet, is to spray the bottles with clear sealer. That also solves the problem of the bottles having a slightly "tacky" feel even after the Mod Podge dries. For the amber look I was after, I think that the Mod Podge and food coloring method worked best even though it did have brush strokes in/on it. I have tried other glass paints in coloring jars and bottles blue (see those blog posts here and here) and they also ended up with brush strokes too. Earlier on, I had purchased some orange bottles on sale from Hobby Lobby even though I did not think they were amber enough to use in the display. I had thought that I would figure out a way to make clear bottles amber and then make them more that color too. In the end, I decided they were just fine in the grouping "as is". Orange square bottles with acorns in them are from Hobby Lobby. Oh, and the original amber bottle I bought last summer that started the display idea...can't find it anywhere. I'm sharing this post at Inspire Me Tuesday @ A Stroll Thru Life