Hi Everyone! Thanks for dropping by. I recently jumped on the bandwagon (yes, I did) and made the Jelly Roll Rug designed by Roma Lambson of RJ Designs original pattern © 2017. I've been secretly wanting to make it for a while, and when I saw one made by Andrea, from our local quilt group, I knew it would be on my list to make in the near future. I asked some of my friends if they wanted to make it along with me, and they were happy to comply, because what is more fun than sewing with your quilty friends!? A big thank you goes out to Katrin, Ines and Andrea for all of your help! I was given this beautiful collection of Indah Pops (batik) from Hoffman Fabrics. It totally is my style with bright solids, colorful prints and black! I thought It was about time to break it out and use for this project. If you are reading this post in hopes of not purchasing the pattern and just "winging" it through the information listed here, you will be sadly disappointed. The purpose of this post is to help you make the best possible Jelly Roll (or 2 1/2" strip) Rug with the original pattern. I want to give you some additional tips for you to succeed, because you probably won't be making this a second time. My first PRE-TIP is for people with allergies. Be really careful with the batting you use. I have allergic asthma and have problems breathing when I work with bamboo batting. I reacted with this batting and my breathing was unfortunately, affected. It may just be a coincidence. We bought the BLEND batting which does not state what the blend is even though it is "organic." I wrote to the company trying to find out what is mixed in, but they haven't answered my email yet. These tips are in no particular order. TIP 1. Fan-fold your never-ending fabric strip!! I overlooked this in the pattern and honestly, didn't know what it meant! Just fold the strips on top of each other like an accordion or ribbon flowing in the wind. If you think it is better to roll them up, you are terrible wrong. But I wouldn't know that, because I just don't do stupid stuff like that! Ha, ha! There was actually so much cuddle-muddle, I blew off steam several times when untangling the ribbon like a Bavarian at a Maibaumtanz. You can also use a meat cleaver or a vertical paper towel holder to hold the batting if you have one. TIP 2. Encase your strips and batting using a scant 1/8" of an inch seam allowance. I used a guided 1/4" presser foot which worked like a dream in this application. I would highly recommend this but find it even better if you use a 1/8" instead if possible. Ines used a 0,5 cm which is still smaller than 1/4". If you use a 1/4" top stitch, this stitch will be visible when butting the strips together and connecting with a zigzag stitch. Even though I increased the width of the zigzag stitch, it was still visible. Since the fabric is expensive, I would personally prefer to see more fabric instead of thread. TIP 3 - Use bold and beautiful prints! Use very pretty and even busy fabric that makes your heart skip a beat. Use the largest prints you can find that you've been avoiding to use for forever. Pull out the Kaffe Fasset fabric hidden deep in your fabric stash. It will work great on this project. Save those solids. If you do use solids, make sure you have a thread that matches the fabric or even invisible (monofil) thread. I wanted to use a variegated thread, but didn't find anything that matched all of the beautiful colors in this strip pack. I decided to be daring and used black. It was very daring! You see everything, especially where I ran out of bobbin thread and backstitched to secure new thread. TIP 4 - When encasing your batting, work in 5" segments with clips. Fold towards the center using the batting as a guide and not the fabric strip. After encasing the first 5" section, go back and clip off in the middle of that section (about every 2 1/2"). Clip off as much of the strip that you can until all of your clips are in use. It makes it more fun to sew when you have large sections clipped and ready to sew. Since the batting will usually be wider (from stretching) than the fabric, use the batting as your guide when quartering and encasing. TIP 5 - Load up at least 8 bobbins of thread. If you can do this, then you certainly should. This project using much more thread than you can imagine. I was a little stunned myself, because I already had about four pre-wound bobbins that disappeared quickly. TIP 6 - Clean out the bobbin area EVERY time you run out of thread. Otherwise you will have tension problems, because there is so much batting and thread from this project collecting there. Take off the presser plate and clean under there and oil the bobbin case as well. TIP 7 - Adjust your thread tension. Make a scrap mini quilt sandwich using scrap pieces of fabric with batting encased, Set your sewing machine to applique zigzag stitch and adjust the tension (less top thread pull) before you start sewing the coil into a rug. You may even need to adjust the bobbin thread tension to get it right. This is crucial. When the tension is set correctly, you shouldn't have to constantly iron this monster. I didn't starch the rug at all. I did iron once in the beginning to get around the first two curves. The iron was turned off after that.Yes, you read that right. I DID NOT IRON. TIP 8 - Use a new 80/12 or 90/14 Top stitch Quilting Needle. Start with this when you start sewing the strips into a ring. Considering how much you sew on this project and how much wear and tear that needle is getting, you will probably be throwing it away afterwards. TIP 9 - Use a quilting table/platform and books to keep the rug level as much as possible. This starts to get bigger quickly and you want to concentrated on sewing together the coil. You do not want to worry about the rug flopping everywhere and you sew off of your seam. When you get a big section of rug in your lap, fold it over slightly onto the quilting table. TIP 10 - Maneuver the rug with your hand and elbow when rotating in the machine. Sorry, there is not photo of this; I was heavily concentrated. : ) Do not pull but rather push and guide under the needle while rotating simultaneously. This whole process reminds me of quilting a quilt. You will get an exercise workout and your shoulders will feel a little tight afterwards. BONUS TIP: After the rug is made, you will have additional strips left over if you use a pre-cut Katahdin On-a-Roll. You can actually make your rug bigger by adding about eight more 2 1/2" strips to the length. Do this before you start to make your coil. I asked my girlfriends what their tips were. Here's their advice: ______ Katrin's Tip: Use an even-feed (Obertransport) foot when sewing. Do not pull or shift the fabric. Ines' Tip: She has an upcoming blog post in German. You can read it here. ____ Rug Statistics: Time making the entire rug: 18+ hours Size: 28" x 46 1/2" Fabrics: One Indah Pops (40) different 2 1/2" strip of Me + You by Hoffman Fabrics Batting: Bosal Katahdin On-a-Roll, 100% Organic Cotton Blend Thread: min. 8 bobbins polyester thread used. Cotton top thread was not counted. Cost: ~90 € without sewing time (in Germany) I am very content with the way the rug turned out. The colors make me smile especially, because they are not in color order! It is a light and colorful rug. It makes a great accent in my sewing room too. If you would like to make a jelly roll rug, I hope these tips will help you to make that perfect rug with your favorite fabrics. If you have any questions or would like to add your own tips below, we all would be very happy to read them. Thank you. Enjoy your weekend. -Quilty hugs, Karen