A rain barrel will provide a simple, inexpensive way to water the garden during a drought. The basic supply list: - Large plastic trash can - 6" plastic flower pot - 2 water valves - 4" solid corrugated pipe - 16" concrete slab - 3' 5/8" water hose A drill, saw, and water proof sealant will be beneficial too. Begin by removing the saucer from the 6" flower pot. Next, place the flower pot upside down on the trash can lid and trace the circumference with a sharpie. Draw a second circle a quarter to half inch inside the first. Drill a small hole on the inner circle line. Cut out the inner circle. Situate flower pot inside the hole. Sit trash can lid off to the side. Now, cut a hole slightly smaller than your water valve at the top and bottom of your trash can. An electric drill with a large bit makes this step much easier. Check for a snug fit before placing a bead of sealant along the back edge of each valve and insert into the trash can. If possible, attach valves to trash can with screws for a stronger fit. Dump gravel or river rocks in the flower pot and place lid on the trash can. Two thirds of the project is complete. Place the 16" concrete stone in the desired location of rain barrel placement to create a solid, level base. A raised platform will elevate the barrel enough to provide sufficient gravity fed pressure. Hint: old bricks work great! Place barrel on the platform, checking for correct height. Cut off the bottom two thirds of existing gutter. Attach collar and corrugated pipe. Attach 3' hose to top water valve. Leave this valve open at all times allowing overflow water to exit the barrel in a controlled manner. Pray for rain. The more barrels, the more free water. Happy rain dancing!