Welcome to my first Block Buster Sunday, where I explore a new (to me) block. I was so excited to put that #1 in the title. It feels good to be starting something new at the beginning of a new year. I'm kicking off with something I've had on my bucket list for ages - curved piecing. I've gone all out with this one, written a tutorial for the technique of curved piecing and played around with the block to give a lot of options, and I've had a load of fun doing it! Don't expect this much every Sunday - this was probably a mix of over excitement at a new blog feature and the fact that I fell in love with the block. There will be a good mix over the weeks of what I consider to be easy, moderate and challenging blocks, so if this one looks too difficult for you, or you've been there, done that with this one, don't worry, by the law of averages I must eventually come up with something to interest you, right? I'm using 5" charm squares to make four blocks, which will be 4" finished (4 1/2" unfinished) You will need: Two 5" square printed fabrics Two 5" solid background fabrics Freezer paper First you need to make a template for the curve. You can of course purchase ready made ones, but this is how I did it. As my squares were 5", I randomly decided that the quarter circle curve I'm creating would be 4" (you can make it any size you want. I created an 8" diameter circle (8" diameter will give me four 4" quarter circles) I drew mine on the computer using Word as it's what I'm most familiar with. You don't have to use the computer, you could draw round an 8" diameter plate or use to a good old fashioned pair of compasses (remember those?) To use Word, click on New Blank Document, click Insert, click Shape, choose the Oval. Drag your cursor until the shape is a reasonable size. Right click and choose Format Shape, choose Size and type in 8.00, then to save ink, choose Fill, then Colour and opt for No Fill. Save your document. (Note: I use a Mac, but I'm sure it's very similar on a PC) Cut an A4 sheet of freezer paper (or whatever size goes through your printer) Place the freezer paper sheet in you printer so that it will print on the dull side. Note: freezer paper goes through my Epsom printer perfectly well as long as I just help it in a little at the start. If you are worried it might chew it up, tape it at one end to a plain sheet of printer paper using sticky back tape or a tiny amount of Blu Tack or other poster adhesive. Print the circle onto the freezer paper. Cut out the circle, and fold first in half and then into quarter segments. Open out and cut along the fold lines to create four 4" quarter circle templates. Lay the template in one corner of one of the 5" charm squares, ensuring the straight edges are lined up, and press in place with a dry iron. Repeat for the remaining three 5" squares. Use scissors or a rotary cutter to around the curved edge of the template on each square. (I used scissors) Carefully peel the freezer paper away from the fabric. I found it easier to pull on the fabric, rather than the paper. You can keep the templates and re-use them. This is what you should have. You now need to make the concave pieces smaller, and the reason is this: A 1/4" seam allowance inwards on the convex piece (the bit that looks like a pie segment) is a shorter line than the cut line. A 1/4" seam allowance inwards on the concave piece (the bit that looks like an L shape) is a longer line than the cut line. Very roughly, there is 1" between the two (yes, I'm truly a geek, I did the maths!!) So we need to slice 1/2" off either end of the concave piece. Do this for all four concave pieces and you should have this: Piecing Take one concave piece and one convex piece. Find the centre by folding each piece in half. Firmly finger press the crease and then open out. Place the two centres together, right sides together and pin in place. It is helpful to use small pins and only pick up a small amount of fabric. Next pin the edges. Make sure the straight edges of the two pieces are parallel with one another and pin the straight edges too. They have a tendency to twist out and I think that side pin is paramount to success ! Hold the section between the edge and the centre between your fingers and gently manipulate until the two meet evenly. Don't stretch it excessively, just work the two edges between your finger and thumb.This is one time when the bias edge is your friend, not your enemy. Pin again. Do the same for the other side. Turn the block so that the section with most undulations is upper most. This is so you can check you are not catching any extra fabric in the seam as you sew. Take the block to your sewing machine and line up with a 1/4" seam allowance. Sew slowly, using the needle down button, if you have one, so that you can stop and adjust the fabric whenever necessary. Use a pin or tweezers or seam ripper to hold the two edges together between pins. Ta Daahh!! The fabric seemed happy to be pressed to either side, so I chose to press towards the print. Repeat for the other blocks you have cut. Now comes the really fun part - seeing all the different arrangements that can be made! 1. 2. 3. 4. I was enjoying this, so I made a few more blocks. 5. 6. 7. 8. 9. 10 And a few more! 11 12 13 14 15 16 17 I'm sorry this has been such a long post. If you're still reading, then I'm amazed, and thank you! I think I got a bit carried away with my enjoyment at making this block. Despite all I said in my last post, I think I will be making a whole quilt or quilts! with some of these arrangements. Curved piecing is not to be feared. I find it much easier than many multi-piece half square triangles. My favourites out of the above arrangements are the simpler, bolder ones. I think numbers 1, 5 and 10 are the ones I like best. I can see myself making a quilt all in solids, maybe with a grey background? Mmmn, the imagination is working overtime. Which is your favourite? Edited to add a link to a YouTube video showing you how to sew curved seams without pins, kindly suggested to me by Lucy who blogs at Charm About You