Today I wanted to share with you a tutorial for an easier way to make a drunkard's path block. I love the drunkard's path pattern but always hate all the techniques to get to the final product. This tutorial allows you to make a machine stitched block much easier and faster then before. No more stabbing yourself with pins or dealing with curves and open bias edges. This super quick super fun process with have you making tons of drunkards in no time! This process is completed using Dale Fleming's 6 Minute Circle. You can view a video tutorial of Dale's technique here, but in case you missed anything I'll show you step by step how its done! *****Edit - 3/29/16***** It has come to my attention that this technique has a name! It is called Piec-lique and was developed by Sharon Schamber. Here is a link to her daughters rendition of the tutorial.When I originally made this post way back in February of 2013, I did a ton of searching and couldn't find anything on the topic. Thank you to Lani for commenting about the technique and bringing it to my attention. And as promised credit where credit is due! :) ******** This tutorial will make four 3.5" finished blocks. You will need: a background fabric a contrasting fabric fabric safe glue stick (I don't think mine is, but its all I had :) freezer paper scissors/rotary cutter/ruler Ok, here we go! Please ignore my poorly manicured hands! Step 1: Cut a piece of freezer paper into an 8.5" square. Then find the center and using a compass ,either bought or homemade, draw a 5" diameter circle. Then cut it out like this! Step 2: Cut your background fabric into an 8.5" square. Match up your background fabric and freezer paper template, wrong side of fabric to the waxy side of template. With a dry iron, iron your template to the fabric. Using your rotary cutter, cut out the inside of the circle leaving approximately a half inch allowance around template. Step 3: Carefully snip the fabric inside the circle so it looks like this. Be sure not to snip all the way to the edge of the circle. Leave about an 1/8 of an inch gap between snip and template. Step 4: Run a light bead of glue on the edge of the paper template and with your fingers and iron gently press snipped edge around the template being careful not to burn yourself. You may have to reapply a little glue as you go. Make sure you pull tightly enough to form the circle shape, but not so tight as to warp fabric. Press thoroughly. Step 5: Cut a piece of contrasting fabric large enough to cover the hole and have about a inch extra all the way around. Step 6: Next, run another bead of glue around the folded edge of the fabric. I like to start from the center out and do dabs rather then in a circular motion so the edges don't catch. Step 7: Position background fabric over the contrasting fabric and press in place. You'll want to press both sides to make sure you have a good hold. Then carefully remove freezer paper template and set aside to use again. Step 8: With zipper foot attached and needle as far left as possible begin stitching in the ditch all the way around circle. When you've finished, cut away excess fabric leaving a rough quarter of an inch seam. Step 9: Cut block in half both vertically and horizontally. Then square up blocks to 3.5". Voila!!! *Note: You can square up your block to 7" first then cut in half vertically and horizontally. Works both ways :) Step 10: Enjoy! P.S. This was my first time writing a tutorial so please feel free to comment or email if you have any questions!