I'm sure you've noticed that I've been going to town with my coverstitch machine, which is a Brother 2340 CV. I initially purchased it because of my frustration with the twin needle for hemming knits. I also picked up a binder attachment, but I wasn't sure I'd use it a ton. Holy moly, was I wrong!! I LOVE this thing, and I want a couple more in every size! After only using it for a week or so, I am in no way an expert, but I thought I'd show you all a few things I've discovered. Of course, the most important thing I've found is Debbie and Belinda's amazing tutorials! If you want to bind with your coverstitch machine, that is the place to start. (ETA: Belinda's blog is unfortunately closed, but Debbie's is still and excellent resource.) So, this is how it looks all set up. This is a generic binder and so it doesn't line up with the attachment point on the face of the machine at all. It is held in place with Sticky Tack, which works great. it doesn't have to interact with your machine, so as long as you have space in front of your presser foot, this binder should work for you. Here is a view from the top. I don't have the shorter presser foot on, so the binder is pretty far forward. It is easier to position if you do not have a long toe on your presser foot. Getting the binding strip in place was tricky the first couple of times. Here is the process, once you have the strip fed through the binder. (Debbie's blog has some great tips for getting that fabric strip in there.) Once the fabric is feed, the binder will fold it. Mine is an A type binder, so it folds under the right side and wraps the raw edge around the wrong side. The next step is a wee bit tricky. You have to fold the binding strip into the two little toes at the front. You'll have to fold it in half and insert it, so that it looks like this. Stitch a little along the empty binding to position it just the way you want it. Just move the binder to the left or right to position it in relation to the needles. Next you'll feed in your fabric. just slide it in between the toes of the binder and let the movement of the binding strip pull it in. I found that if I didn't put any tension on the fabric to be bound, I ended up with some gathering, just like if you sewed over stretched elastic. See how gathered that little sleeve is? Cute, but totally unintentional. I'm glad I made a girlie item first! With a little experimentation, I discovered how much I needed to pull on the fabric as I fed it to keep it from gathering, so my boy shirt lies nice and flat. I'm honestly not sure if there was a better way to do this. I'm hoping you'll all share your coverstitch tips and tricks, too!