We LOVE the look of Lacquered finishes... but they can be tricky Kenny enjoys using his spray gun with enamel paint, but me? Not so...

We LOVE the look of Lacquered finishes... but they can be tricky Kenny enjoys using his spray gun with enamel paint, but me? Not so...

The perfect preparation for your lacquer project! Furniture Lacquer Primer prepares your surface for High Performance Furniture Lacquer. It will help the vibrant color of the Furniture Lacquer adhere to your piece. ~section 2~ “Lacquer is a timeless and fun way to add a touch of whimsy to your home.” Nothing says modern chic like the vibrant color and depth of lacquer. For best results, use Amy Howard At Home Furniture Lacquer Primer, spray 2-3 thin coats of High Performance Furniture Lacquer as you lightly sand in between, and finish with Bright Idea Lacquer as your topcoat. Amy’s Tip: Lacquer is a delicate specialty finish, so keep your lacquered pieces indoors and protected from bumps and scrapes.

We LOVE the look of Lacquered finishes... but they can be tricky Kenny enjoys using his spray gun with enamel paint, but me? Not so much It's the "cleaning" part that gets me... I am not a strong "cleaner-upper" which is REALLY bad with a spray gun and oil based paint! I've tried using Rustoleum's lacquer spray with mediocre results I'd never attempt it with a large piece... the nozzle doesn't offer a large enough fan of spray and there always seems to be TONS of overspray Up until now, I've stuck with hand painting using high gloss enamel paint 24hrs between coats, and the last dresser I did took EIGHT coats of paint EIGHT!!!! Enter Amy Howard Home's High Performance Lacquer Spray... I started out small, doing shelves, mirrors, candle sconces, etc Feeling pretty confident, I tackled a larger mirror It turned out textbook perfect...so I felt REALLY brave and decided to tackle a dresser! Here's the thing...spray paint works great on smaller projects, or projects without many large, flat surfaces Tackling dresser tops, sides, drawer faces...that requires a certain degree of skill (skill I did NOT think I possessed, by the way!) Spray paint can be streaky, uneven, and of course, there is the dreaded over-spray that comes from moving too fast, too slow, being too close, being too far away spraying too heavy, spraying too lightly...you see what I mean? It's a delicate balance! I had every belief that I would be repainting this dresser when my spray painting went horribly awry... but it didn't go awry at all! OH, happy day! Thrilled with the results, I tackled a desk (ok, after I sprayed a gazillion smalls!) I feel like my technique has gotten better with every project, although I do still have some trepidation with that first pass! Kenny has given me some GREAT tips that have helped so much... so I'll share with you what I've learned BEFORE YOU BEGIN, SHAKE YOUR CAN NOW, SHAKE IT SOME MORE AND A BIT MORE... OK, NOW YOU'RE READY! 1. Choose your subject well- the piece needs to be in GREAT shape, or you need to repair any loose paint, chips, dings, dents, etc...lacquer magnifies every single flaw and unlike a distressed finish, the flaws don't add to the charm! 2. De-grease the surface- I prefer to use Simple Green. Make sure whatever you use does't leave any residue behind, and ensure that it is COMPLETELY dry before you begin spraying 3. ONLY spray in a well-ventilated area- Lacquer smells like, well, lacquer. Spraying a big piece or many pieces at once? Wear a respirator. 4. Protect the things around you- there will be some over-spray (much less than with other brands we've used). Cover up things you don't want to have to dust off later. 5. Read the instructions- hold the can 4-6" away from your project (yep, it's right there on the can!) 6. Start spraying OFF your project- begin spraying a bit off the project (into the air, basically), moving onto your piece. Finish spraying OFF your project (again, into the air). This prevents build-up at the start and end areas 7. Move your arm in a straight line...pretend you have a robotic arm. Don't arc (you're not making a rainbow!) and keep your arm steady 8. Overlap- don't leave unpainted gaps. If you see a gap between your rows, fill it in now, not later. Going back later can lead to a streaky finish 9. Maintain a steady, moderate speed- too fast and you'll have over-spray (sandy paint), too slow and you'll have drips...just go nice and even. Practice on cardboard first 10. TA-DA..stand back and admire your awesomeness! A few other things worth noting: Did I mention to shake your paint?? If you get a drip, LEAVE IT ALONE! Don't try to fix it while wet. You'll just make a mess. When it's dry, gently sand it out and re-spray that area. The WHOLE area, not just the little drip area. This seems like a no-brainer, but let each coat dry before applying the next. Think of it like nail polish...if you keep globbing on more polish, it never dries right, chips, and wastes a bunch of polish. Same thing with lacquer. Thinner is better. Not so thin it's streaky...but going too heavy will lead to drips, streaks, and problems with drying One last thing...if you have NEVER sprayed before, or have sprayed but haven't had much luck, don't try to tackle a dresser, or desk, or table right away...bang out a few smaller items first to hone your technique. You'll be glad to have the added experience, plus BONUS, you will have cool accessories lacquered to match! Have fun and happy (spray) painting, M~

We LOVE the look of Lacquered finishes... but they can be tricky Kenny enjoys using his spray gun with enamel paint, but me? Not so much It's the "cleaning" part that gets me... I am not a strong "cleaner-upper" which is REALLY bad with a spray gun and oil based paint! I've tried using Rustoleum's lacquer spray with mediocre results I'd never attempt it with a large piece... the nozzle doesn't offer a large enough fan of spray and there always seems to be TONS of overspray Up until now, I've stuck with hand painting using high gloss enamel paint 24hrs between coats, and the last dresser I did took EIGHT coats of paint EIGHT!!!! Enter Amy Howard Home's High Performance Lacquer Spray... I started out small, doing shelves, mirrors, candle sconces, etc Feeling pretty confident, I tackled a larger mirror It turned out textbook perfect...so I felt REALLY brave and decided to tackle a dresser! Here's the thing...spray paint works great on smaller projects, or projects without many large, flat surfaces Tackling dresser tops, sides, drawer faces...that requires a certain degree of skill (skill I did NOT think I possessed, by the way!) Spray paint can be streaky, uneven, and of course, there is the dreaded over-spray that comes from moving too fast, too slow, being too close, being too far away spraying too heavy, spraying too lightly...you see what I mean? It's a delicate balance! I had every belief that I would be repainting this dresser when my spray painting went horribly awry... but it didn't go awry at all! OH, happy day! Thrilled with the results, I tackled a desk (ok, after I sprayed a gazillion smalls!) I feel like my technique has gotten better with every project, although I do still have some trepidation with that first pass! Kenny has given me some GREAT tips that have helped so much... so I'll share with you what I've learned BEFORE YOU BEGIN, SHAKE YOUR CAN NOW, SHAKE IT SOME MORE AND A BIT MORE... OK, NOW YOU'RE READY! 1. Choose your subject well- the piece needs to be in GREAT shape, or you need to repair any loose paint, chips, dings, dents, etc...lacquer magnifies every single flaw and unlike a distressed finish, the flaws don't add to the charm! 2. De-grease the surface- I prefer to use Simple Green. Make sure whatever you use does't leave any residue behind, and ensure that it is COMPLETELY dry before you begin spraying 3. ONLY spray in a well-ventilated area- Lacquer smells like, well, lacquer. Spraying a big piece or many pieces at once? Wear a respirator. 4. Protect the things around you- there will be some over-spray (much less than with other brands we've used). Cover up things you don't want to have to dust off later. 5. Read the instructions- hold the can 4-6" away from your project (yep, it's right there on the can!) 6. Start spraying OFF your project- begin spraying a bit off the project (into the air, basically), moving onto your piece. Finish spraying OFF your project (again, into the air). This prevents build-up at the start and end areas 7. Move your arm in a straight line...pretend you have a robotic arm. Don't arc (you're not making a rainbow!) and keep your arm steady 8. Overlap- don't leave unpainted gaps. If you see a gap between your rows, fill it in now, not later. Going back later can lead to a streaky finish 9. Maintain a steady, moderate speed- too fast and you'll have over-spray (sandy paint), too slow and you'll have drips...just go nice and even. Practice on cardboard first 10. TA-DA..stand back and admire your awesomeness! A few other things worth noting: Did I mention to shake your paint?? If you get a drip, LEAVE IT ALONE! Don't try to fix it while wet. You'll just make a mess. When it's dry, gently sand it out and re-spray that area. The WHOLE area, not just the little drip area. This seems like a no-brainer, but let each coat dry before applying the next. Think of it like nail polish...if you keep globbing on more polish, it never dries right, chips, and wastes a bunch of polish. Same thing with lacquer. Thinner is better. Not so thin it's streaky...but going too heavy will lead to drips, streaks, and problems with drying One last thing...if you have NEVER sprayed before, or have sprayed but haven't had much luck, don't try to tackle a dresser, or desk, or table right away...bang out a few smaller items first to hone your technique. You'll be glad to have the added experience, plus BONUS, you will have cool accessories lacquered to match! Have fun and happy (spray) painting, M~