When Power, Performance and Passion combine and welding is involved, the PowerTIG 200 DX (DV) stands ready to deliver. It features the highest duty cycle in its class (60%) along with a solid 200-amp of AC/DC TIG welding power that can weld any metal up to 1/4 in. in a single pass. It also delivers solid stick welding performance with 160-amp of power, enough to handle most 1/8 in. electrodes. The Dual Voltage capability allows you to use the unit with 120-Volt in areas that don't provide 240-volt electricity. Although the output is somewhat decreased to 125-amp in TIG mode, it still provides enough to provide the welder the capability to weld up to 1/8 in. thick aluminum, and 3/16 in. steel in a single pass. 120-volt stick operation provides 90-amp of welding power, which allows it to be used with all 3/32 in. and some 1/8 in. welding electrodes. It comes with everything you need to TIG weld, except argon shielding gas (cylinder not included), tungsten, and personal protective equipment. Foot pedal, Air cooled TIG torch, stick electrode holder with cable, work clamp with cable, regulator, and starter consumable kit are included as part of the standard package."}},"base-catalog-204629247":{"__typename":"BaseProduct All-in-1 portability offers new solution for small garages, farms, and portable welding activities Compact design allows the unit to go anywhere straight forward controls, with 3 pulse settings and adjustable pulse frequency Quick change out of torches for easy change from TIG to plasma back to TIG Improved reliability due to completely new digital inverter design High duty cycle of 60% at max rated amperage for TIG, 35% for stick and plasma at max rated amperage Front air pressure gauge for easy verification of air pressure Over current/duty cycle protection circuit warns and interrupts welding/cutting to ensure safe, and long life operation Clean and smooth plasma cuts on virtually any metal Welds steel, stainless steel and titanium (the PowerUltra is DC output only, and is not suitable for welding aluminum, although it can cut aluminum) Advanced TIG functions for DC TIG welding 3 pre-programmed pulse functions with adjustable pulse frequency (.1-150 Hz) in each program Dual voltage design allows unit to be operated on 120-Volt or 240-Volt (output is reduced in 120-Volt operation to approximately 125 Amp TIG/ 95 Amp stick/25 Amp plasma)