10-YEAR GUARANTEE ON ALL OUR STOOLS These stools DO NOT BREAK. If yours does, then we’d be very shocked. Let us know and we’ll replace it, no fuss Our simple design industrial bar stool, 'Bertie', is made from 20mm x 20mm 2.5mm steel square section. We weld them by hand, which means we can ensure welds penetrate the steel, making it unbreakable. We clean them up with a high-speed wire brush taking care to retain the natural blacking it arrives here with from the foundry. Then, by hand, we apply beeswax to clean and protect the steel from rusting. We supply (free of charge) a small pot of wax paste you can use to ‘rewax’ should that become necessary. We then fit hard wearing plastic feet to the base of the stool’s legs to protect your floor from scratching. Extremely robust and hard wearing - these stools do not break. Bertie Fouroak’s seat is made from 30mm thick English oak which we hand finish then protect with two coats of oil followed by a buff up with natural beeswax. Take a look at our Instagram gallery- https://www.instagram.com/paul_frampton_design/ to see photos of many of our stools stools in a more natural settings of our customers’ homes. The stool height of 750mm is standard. You can have them made at any height you like, just get in touch and let us know the dimensions you need. We suggest that you allow a MINIMUM gap of 200mm between the top of the stool and the underside of your bar/counter. At stage three of ‘Checkout’ there is a comments area where you can write the height you need We can ship to all destinations so please contact us for a quote for destinations outside mainland UK UK packaging and shipping £10 Dimensions Height 750mm Frame width at base 310mm x 310mm Frame width at top 200mm x 200mm Seat dimension 250mm x 250mm