Two arched taguaringe in red with shifted hole and a cordole, 25 mm tall. Two taguaringe rings with a hole pushed upwards (off-center), 25 mm tall and 5 mm thick. The front of the ring is slightly arched and the back smooth. At the top of the narrower edge of the ring sits a cord hole about 2.4mm in diameter. These taguaringe are great for earrings. The inner hole has a diameter of about 10 mm and a height/thickness of 5 mm. The ring is about 2 mm thick at the extreme edge and then gets thicker and thicker up to the middle until it reaches a thickness of 5 mm. The edge at the top, where the cordon is located, is about 7 mm wide. The edge to the right and left of the ring is about 8 mm wide. The edge below is about 10 mm wide. Please note: The tagua or stone nut is a natural product that is cut into slices, lentils, pearls, rings etc. after drying before it is inked. The individual parts may have cracks, grain, brown shell residues, etc. These are not errors. These characteristics are so wanted and make up the very special design of the Tagua products. Each piece is cut, drilled and dyed by hand. No part is the same. The products from the Tagua, like pearls, are relatively heavy and cool (this is the stone character). Because of its beautiful white fruit, the Tagua is also known as the plant ivory. Thanks to its cool-smooth grip and beautiful shapes, the Tagua products can be processed into exceptional and luxurious jewellery. Size/Dimensions/Weight Dimensions: About 25 mm x 5 mm Weight: About 5 grams Quantity: 2 units Colour: Red Shape: Vaulted ring with upwards moved hole Number of cords: 1 Phole size: 2.4 mm Material Tagua (Stone Nut)