*DIGITAL FILE ONLY* This is my own version of a Proxxon Thermocut Guider that I made in Autodesk Fusion 360. It works pretty well, as it should. Aligns very well and is snug in the fittings. Just cut out and assemble with superglue or the glue of your choice. Cut on my Xtool D1 10W laser. In the bottom rail there is a 2mm gap since I used 3mm MDF and the rail should be 8mm thick. I solved this by just cutting out a small strip of XPS and slid it in the gap to make it even more stable. The strip could be thicker or thinner depending on how hard you want the guider to sit on the cutter. I want my guider to not get completely stuck so I just cut a 2mm thick strip. Works like a charm. Comes as a DXF PLEASE NOTE: You must have a cutting machine with software that is compatible with DXF files. Please make sure your machine and software are compatible with DXF files before purchasing. No refunds will be given on digital files.