Ready to Press *Transparent Background* These are Direct To Film transfers HEAT PRESS REQUIRED Design is measured by WIDTH. If you need an exact measurement, don't hesitate to send me a message. ** Pressing Instructions ** Preheat garment to remove excess moisture. Align your transfer - Press to instructions of your material - Let cool. COLD peel. Second press at instructions of your material. Do NOT wash or stretch for 24-48 hours to let transfer cure. ** Wash Instructions ** -Turn garment inside out -Machine wash cold -NO bleach -NO fabric softeners -DO NOT dry clean -DO NOT iron -Hang to dry or tumble dry low -- GENERAL INFORMATION -- Pressure: Med-Firm (60lb of pressure) Peel: COLD Poly: 275F/10seconds Tri: 275F/10seconds 50/50: 300F/12seconds Cotton: 325F/15seconds -- ADDITIONAL -- COTTONS & BLENDS 300-315/325F for 10-12s, Second press 5-10s Medium pressure is best. Hoodies may require 325 and up, medium press 10-12s POLYESTERS 265-275/285F for 8-10s Medium-light pressure (if they are thinner), otherwise it creates a box or scorches the transfer. Polyester settings may vary a lot, but best to use lower temp and pressure generally. -- FINISHING -- This is the second press and depends on the cover sheet you use. Matte finish: Kraft/parchment cover sheet, rougher texture. Shiny/gloss: teflon sheet ----- GARMENT TYPES ----- DTF works with almost all Fabrics and garment types. This list includes but not limited to: Combed Cotton Ring Spun Cotton Organic Cotton Polyesters Blended Fabrics Poly-Cottons Tri-blends Polyester-Spandex Leather Vinyl Denim Canvas PLUS MORE! Color will vary from monitor to monitor. Shop is not responsible for transfers that are pressed wrong. ** DISCLAIMER ** I do NOT claim to own any of these characters!