This listing is for the digital plans for the "Jobsite Table Saw Workbench" as featured on the Shop Nation YouTube channel which is a highly requested build on the channel. This project is very approachable for just about any skill level and will give your small shop a lot of organization. This little workbench features internal routing of dust collection and electrical components as well as a built in router lift! The design is modular in nature so customizing to fit your exact needs is fairly easy. The workbench measures 72" long by 39" wide by 36.5" tall. This design was specifically made for the DeWalt DWE 745 or DWE 7485 jobsite table saw. This will NOT fit the larger DWE 7491RS Model (There will be a larger version made for that saw). The approximate cost for building the workbench as designed (including the router lift) is ~$1000 (this will of course vary for everyone) Wood only - $375 Electrical & Dust Collection System - $120 Hardware - $150 Everything Else - $500 (router lift, T-Track, etc) Tag me on social if you're building this project (@dreamshopnation on Instagram) with the hashtag #shopgreatness. When you purchase these plans you can request the latest revision at any time - for no additional charge! Happy building!!! With purchase of the plans you are entitled to latest version if you ask me! Revision History: Version 1.2 [7/9/2022] Corrected the "end panel" dimensions from 28" wide to 30" wide. Went through and corrected references and updated cut sheets. Also made small formatting changes. Version 2.0 [8/17/2022] Updated QR Codes, minor formatting updates Version 2.1 [11/11/2022] Corrected lower organizer insert materials type from 3/4" plywood to 1/2" plywood. This caused the cut sheets to be incorrect and the resulting organizer insert would not fit into the lower opening. Updated cut sheets and references throughout.
