This large Moroccan tile inspired stencil is perfect for adding interest to both floors and wall tiles. It can be used for interior and exterior projects and is a great option for transforming patios Stencils are cheap, easy to use and are reusable. Available in a range of sizes, with custom sizes available on request at no extra cost. NB: Bespoke stencils are non returnable. Laser cut using premium quality 190 micron Mylar. I prefer to lightly coat the back of my stencils with a spray adhesive and apply the paint using a stencil brush. Should you prefer, the stencil can be held in position with tape and the paint applied with a small sponge foam roller. Remove as much paint as possible from the brush or roller before applying. This will help to prevent the paint from bleeding beneath the surface of the stencil and help to create clean, crisp lines. Remember that stencilling is a technique which is created by hand and therefore any small mistakes should be seen as part of the charm. For larger projects I recommend purchasing 2 stencils to help speed up the project and if needed one of the stencils can be cut to fit into difficult areas. The stencils can always be bent to fit into areas, but this can be frustrating. Try using with Nicolette Tabram Stencil paint for floors, walls and furniture projects. Water based, hardwearing and formulated for both interior and exterior DIY projects, a little pot goes a long way. For floor projects use directly onto wood or concrete, or on to painted floor surfaces. For additional protection, apply a top coat of clear matt varnish onto floors.