The only helmet that stops up to .50 cal AE and .44 Magnum that is used by the U.S. Government. Fits all your existing gear with mil-spec features and standards. Atomic Defense's legendary lifetime warranty for all parts and defects. You're supporting American jobs and workers that make quality products by hand. The FAST Combat Helmet from Atomic Defense is an above-the-ear (ATE) high-cut ballistics helmet that offers best-in-class protection. The rounded helmet exterior deflects or absorbs bullets away from the head, while interior padding protects the wearer from the impact force. We go above and beyond the competitors by subjecting Atomic helmets to extensive testing. While others may test an ATE ballistic helmet with one or two rounds, a single Atomic Defense FAST Combat Helmet is tested to withstand 18+ rounds from various calibers of weapons, including two 44 Magnum shots. Lighter rounds like copper-tip 22-caliber and 9mm hollow-point bullets barely scratch the surface. Features: NIJ IIIA+ armored helmets are lighter-weight and safer than the old Kevlar tactical helmets. Can stop the same ammunition as a level 3A+ police or military vest. (.44 Magnum, 9mm, .45 cal, .40 cal, 38, 12 gauge slug, buckshot, and many more!) Built with the exact materials and craftsmanship we use for our police and military customers. Tested for the latest NIJ standards. Rapid adjusting headband. 4-point chin straps that are fully adjustable with a leather chin grip. Fully adjustable memory padding that can be moved around, taken out, and beaten, and still retain its shape for years to come. Feels tough at first? Leave it on for a minute. Tactical ARC rail system with 2-point bungee and vertical + horizontal rails. A 360-degree all-weather coating that extends inside the helmet. Specs: NIJ IIA, II, and IIIA latest 0106.01 and 0108.01 standards surpassed in testing Aramid Shell Weight: 20-23" Size (2.3 lbs / 1.04 kg), 22-27" Size (2.6 lbs / 1.18 kg) Total Weight w/ All Accessories: 20-23" Size (3.4 lbs / 1.5 kg), 22-27" Size (3.6 lbs/ 1.6 kg) Fits: See chart below (Head circumference measured starting above brow-line) Stops: 9mm FIOCCHI, 115gr. (FMJ) 9mm WINCHESTER RANGER, 127gr. (SXT) .357 SIG, 115gr. (JHP) .357 SIG, 125gr. (GDHP) .40 CAL, 95gr. (HP) .44 Mag, 240gr. (SJHP) 7.62mm x 25mm TOKAREV NORINCO, 85gr. FMJ (STEEL JACKET) 7.62mm x 25mm TOKAREV FOREIGN, 85gr. FMJ (STEEL JACKET) 7.62mm x 25mm TOKAREV S&B, 85gr. FMJ (STEEL JACKET) .50 CAL American Eagle, 350gr. (JHP) 5.7mm x 28MM, 27gr. (SS195) 5.7mm x 28MM, 40gr. (HORNADY BLUE TIP) Other Compliance Standards: VPAM: PM 1-5 with PM 6 resistance. TR DE: SK L-2 with SK 3 resistance. HOSDB: HG1/A-HG2 with RF1 resistance. GOST: Class 1-2A with Class 3 resistance. GOST 2017: BR 1-3 with BR 4 resistance. Size Head Circumference Hat Standard Inch cm US S/M/L 20 - 23 50 - 59 6 1/4 - 7 1/2 L/XL/XXL 22 - 27 57 - 69 7 1/8 - 8 1/2+ Assembled and In the Box: Upgraded IIIA+ Helmet in selected color and size Straps and harness system (Color matched) Exterior Velcro (Color Matched) ARC rail system (Color matched) Bolts holding the ARC rails in place (Black) Bungees with self-hold integrated into the ARC rails (Color matched) NVG Shroud (Sometimes called the NVG mount) (Color matched) Interior Tan padding set (safety) Interior padding sets (one thin set and one thicker set). Padding sets can be mixed and matched as long as the tan safety padding remains. ARC to Picatinny adapter Other: Complies with: US Standard - Mill STD 662 E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920 This package does not come with attachments like comtacs or a bulletproof visor. Images are to show what is possible with our helmets. FAQ: Q: How is this helmet different from the competition? A: This ATE helmet offers IIIA+, aka 3A+ protection. This means that it meets and exceeds the standards you will find on many other helmets. Our helmets are capable of taking multiple strikes, stabbings, shrapnel, etc. Some unique features include; highly adjustable interior padding, rigid exterior, smooth coat interior all-weather paint, NVG mount, 4-way rail system, extra padding that's Velcro adjustable, bungees, leather chin strap, and ratcheting head-capture system to fit almost any head size and shape. Q: What attachments will this helmet take AND where can I get the ones that are pictured? A: We didn't want to force customers into some proprietary or non-standard system. So we use the standard rail system and configurations for all our mounts/rails. Standard multi-NVG mount and standard rail system just to name two. This lets you fit all those combat helmet attachments you already have, plus all the after-market ones you might need in the field. Clear 3A Ballistic Face Shield for Helmets Q: What is the return policy? A: We are flexible. Please note that should the helmet show any signs of wear on a return, we cannot offer refunds for customer safety. Simply put, don't try to pull a fast one after you take those sweet Instagram pics on your sweaty head. (See our returns and/or warranty section at the bottom of this page for more details) About the FAST Ballistic Helmet Dangerous situations call for protective equipment that enables effective communication between operatives. The FAST Ballistic Helmet is the ideal above-the-ear helmet for combat situations. FAST high-cut tactical helmets offer level IIIA+ protection with Aramid for lightweight head protection. What sets the FAST helmet apart from others is its higher-cut ATE shell that frees the wearer's ears. This modern-style ballistic helmet lends itself to seamless integration with communications devices. A headset can fit under the FAST helmet or attach to the side with an adapter. Now, soldiers can access a high level of bulletproof protection while maintaining consistent communication with comrades. The FAST helmet is also compatible with various other accessories that can further improve performance. FAST Ballistic Helmet Applications The FAST Ballistic Helmet is a useful tool in various situations. The high-cut design makes this helmet perfect to wear while standing guard or patrolling a potentially dangerous area. The helmet is comfortable to wear for long hours, and its ear exposure allows for easy integration with communications devices. Soldiers on patrol will remain free of distractions from their equipment while staying ready to communicate messages to fellow soldiers or suppliers. This FAST Ballistic Helmet also boasts features that make it a dependable combat tool. Its lightweight materials protect the wearer while sitting comfortably on one's head. Soldiers can lock onto targets in high-pressure situations while feeling confident in their protective gear and avoiding distractions. Bolster Your FAST Ballistic Helmet With Practical Accessories One of the best features of the FAST-style bulletproof helmet available through Atomic Defense is that it is compatible with various accessories. The helmet includes a tactical ARC rail system with vertical and horizontal rails for premier versatility. Your helmet will be compatible with most of the accessories you already have, such as lights, cameras, mandible guards, counterweights, and more. Atomic Defense carries durable helmet visors compatible with our FAST-style helmets. These helmets are tactical tools that allow the wearer to prepare for whatever may lie ahead. Order FAST Helmets Online Today Order a high-cut tactical helmet online through Atomic Defense for level IIIA+ bulletproof protection and ultimate compatibility with all your standard accessories. Atomic Defense offers affordable rates, free shipping, and an excellent customer experience. Ordering ATE helmets for the entire squad? We offer various customization and wholesale options for bulk orders. Our experts are happy to help you decide on the right helmet or discuss our NIJ testing methods, so contact Atomic Defense today!
Ballistic Helmet with Face Shield | NIJ Level IIIA+ Ballistic Helmet with Face Shield is an advanced protective gear that offers superior protection for the head and face. It conforms to multiple stringent standards such as E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920, NIJ 0106.01, and more, ensuring top-tier protection. The helmet includes a Visor made of Polycarbonate, which is a strong, transparent material renowned for its impact resistance. The Visor is designed to be adjustable with three different positions for user convenience and safety optimization. The helmet and visor both provide NIJ Level IIIA protection, meaning they have been tested and proven to resist high-velocity handgun rounds. Ballistic Helmet with Face Shield Review Ballistic Helmet with Face Shield Features Superior Protection: Our Ballistic Helmet with Face Shield offers IIIA+ ballistic protection, higher than competing helmets. It can withstand shots from .50 cal and .44 Magnum rounds. Clear Visor: The ballistic visor is perfectly clear, devoid of bubbles or other manufacturing imperfections, offering optimal visibility. Adjustable Visor: The visor features three adjustment points, allowing it to be set straight ahead, halfway up, or directly overhead. Bullet-Blocking Design: The visor's multi-layered polycarbonate material absorbs impact effectively, halting bullets. Full-Face Coverage: The helmet provides comprehensive protection for both the head and face, ensuring your safety in high-risk situations. Comfort Optimized: Both the helmet and the visor are designed for comfort, with adjustable interior padding and a lightweight design that won't cause discomfort, even after prolonged wear. Convenient Installation: The helmet comes with pre-attached brackets and an ARC mounting system, making it easy to attach the IIIA visor. Fog-Free Visor: The helmet-mounted visor doesn't fog up and doesn't restrict breathing, ensuring clear vision at all times. Tested & Certified: All our helmets and visors undergo rigorous testing at our in-house facility and with independent NIJ lab tests, surpassing National Institute of Justice standards. Two Helmet Styles Available: Choose from the Modular Integrated Communications Helmet (MICH) for extended ear coverage, or the Future Assault Shell Technology (FAST) helmet for maximum attachment compatibility. Both options offer NIJ Level IIIA protection. What's in the box of the Ballistic Helmet with Face Shield? Upgraded IIIA+ Helmet in selected color and size (Pre-assembled with the following) Straps and harness system (Color matched) Exterior Velcro (Color Matched) ARC rail system (Color matched) Bolts holding the ARC rails in place (Black) Bungees with self-hold integrated into the ARC rails (Color matched) NVG Shroud (Sometimes called the NVG mount) (Color matched) Black and Tan Interior padding sets (one thin set and 2 thicker sets). Padding sets can be mixed, matched, or removed as long as the Tan safety padding remains. ARC to Picatinny adapter 3A visor (Pre-assembled with the following) Pre-attached brackets and mounting system Visor Fabric Cover (Not pictured) Ballistic Helmet with Face Shield Specifications Helmet Standard: E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920, NIJ 0106.01 Additional Certifications: VPAM: PM 1-5 with PM 6 resistance, TR DE: SK L-2 with SK 3 resistance, HOSDB: HG1/A-HG2 with RF1 resistance, GOST: Class 1-2A with Class 3 resistance, GOST 2017: BR 1-3 with BR 4 resistance Visor Material: Polycarbonate Visor Size: 5.9 in. by 15 in. / 150mm by 380mm Visor Weight: 3 pounds / 1.342 kg Visor Thickness: 0.86 in. / 22mm Visor Adjustment: Three adjustment points Helmet Assembly: Includes straps and harness system, ARC rail system, exterior Velcro, NVG Shroud, ARC to Picatinny adapter, and interior padding sets Protection Level: IIIA+ ballistic protection for both helmet and visor Bullet Resistance: Capable of resisting rounds from .357 Magnum JSP, 9 mm FMJ, .50 cal, and .44 Magnum Helmet Styles: Available in MICH (Modular Integrated Communications Helmet) and FAST (Future Assault Shell Technology) styles Visibility: Clear visor, designed to be free of bubbles or imperfections Comfort: Adjustable interior padding for prolonged wear Versatility: ARC rail system for easy visor installation, adjustment, and removal. Ballistic Helmet with Face Shield FAQs How heavy is the Ballistic Helmet with Ballistic Face Shield? With a visor weight of 3 pounds and the lightweight helmet design, our ballistic helmet with face shield is designed for comfort, even during extended wear. The exact weight can vary slightly depending on the size and model of the helmet. Can the Ballistic Helmet with Face Shield withstand multiple bullet impacts? Yes, our ballistic helmet with face shield is designed to withstand multiple bullet impacts. The helmet and visor are tested to endure at least four hits each from .357 Magnum JSP and 9 mm FMJ, exceeding NIJ standards. Is the Ballistic Helmet with Face Shield comfortable for extended wear? Yes, the ballistic helmet is designed with a state-of-art interior padding system that ensures comfort during prolonged use. The padding can be adjusted for a customized fit. Can the visor on the Ballistic Helmet be replaced? Yes, the ballistic visor can be easily installed, adjusted, and removed thanks to the ARC rail system integrated into our helmet design. This makes replacing the visor a straightforward process. Is the Ballistic Helmet with Ballistic Face Shield suitable for use in all weather? Yes, our ballistic helmet with face shield is finished with an all-weather paint, making it suitable for use in various weather conditions. However, it is advised to store it properly when not in use to maintain its condition and prolong its lifespan. How is the visibility with the face shield? The visor is made of a clear, bubble-free polycarbonate material, providing unobstructed vision. Additionally, the visor does not fog up and won't restrict your breathing, ensuring maximum comfort and performance.
Ballistic Helmet with Face Shield | NIJ Level IIIA+ Ballistic Helmet with Face Shield is an advanced protective gear that offers superior protection for the head and face. It conforms to multiple stringent standards such as E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920, NIJ 0106.01, and more, ensuring top-tier protection. The helmet includes a Visor made of Polycarbonate, which is a strong, transparent material renowned for its impact resistance. The Visor is designed to be adjustable with three different positions for user convenience and safety optimization. The helmet and visor both provide NIJ Level IIIA protection, meaning they have been tested and proven to resist high-velocity handgun rounds. Ballistic Helmet with Face Shield Review Ballistic Helmet with Face Shield Features Superior Protection: Our Ballistic Helmet with Face Shield offers IIIA+ ballistic protection, higher than competing helmets. It can withstand shots from .50 cal and .44 Magnum rounds. Clear Visor: The ballistic visor is perfectly clear, devoid of bubbles or other manufacturing imperfections, offering optimal visibility. Adjustable Visor: The visor features three adjustment points, allowing it to be set straight ahead, halfway up, or directly overhead. Bullet-Blocking Design: The visor's multi-layered polycarbonate material absorbs impact effectively, halting bullets. Full-Face Coverage: The helmet provides comprehensive protection for both the head and face, ensuring your safety in high-risk situations. Comfort Optimized: Both the helmet and the visor are designed for comfort, with adjustable interior padding and a lightweight design that won't cause discomfort, even after prolonged wear. Convenient Installation: The helmet comes with pre-attached brackets and an ARC mounting system, making it easy to attach the IIIA visor. Fog-Free Visor: The helmet-mounted visor doesn't fog up and doesn't restrict breathing, ensuring clear vision at all times. Tested & Certified: All our helmets and visors undergo rigorous testing at our in-house facility and with independent NIJ lab tests, surpassing National Institute of Justice standards. Two Helmet Styles Available: Choose from the Modular Integrated Communications Helmet (MICH) for extended ear coverage, or the Future Assault Shell Technology (FAST) helmet for maximum attachment compatibility. Both options offer NIJ Level IIIA protection. What's in the box of the Ballistic Helmet with Face Shield? Upgraded IIIA+ Helmet in selected color and size (Pre-assembled with the following) Straps and harness system (Color matched) Exterior Velcro (Color Matched) ARC rail system (Color matched) Bolts holding the ARC rails in place (Black) Bungees with self-hold integrated into the ARC rails (Color matched) NVG Shroud (Sometimes called the NVG mount) (Color matched) Black and Tan Interior padding sets (one thin set and 2 thicker sets). Padding sets can be mixed, matched, or removed as long as the Tan safety padding remains. ARC to Picatinny adapter 3A visor (Pre-assembled with the following) Pre-attached brackets and mounting system Visor Fabric Cover (Not pictured) Ballistic Helmet with Face Shield Specifications Helmet Standard: E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920, NIJ 0106.01 Additional Certifications: VPAM: PM 1-5 with PM 6 resistance, TR DE: SK L-2 with SK 3 resistance, HOSDB: HG1/A-HG2 with RF1 resistance, GOST: Class 1-2A with Class 3 resistance, GOST 2017: BR 1-3 with BR 4 resistance Visor Material: Polycarbonate Visor Size: 5.9 in. by 15 in. / 150mm by 380mm Visor Weight: 3 pounds / 1.342 kg Visor Thickness: 0.86 in. / 22mm Visor Adjustment: Three adjustment points Helmet Assembly: Includes straps and harness system, ARC rail system, exterior Velcro, NVG Shroud, ARC to Picatinny adapter, and interior padding sets Protection Level: IIIA+ ballistic protection for both helmet and visor Bullet Resistance: Capable of resisting rounds from .357 Magnum JSP, 9 mm FMJ, .50 cal, and .44 Magnum Helmet Styles: Available in MICH (Modular Integrated Communications Helmet) and FAST (Future Assault Shell Technology) styles Visibility: Clear visor, designed to be free of bubbles or imperfections Comfort: Adjustable interior padding for prolonged wear Versatility: ARC rail system for easy visor installation, adjustment, and removal. Ballistic Helmet with Face Shield FAQs How heavy is the Ballistic Helmet with Ballistic Face Shield? With a visor weight of 3 pounds and the lightweight helmet design, our ballistic helmet with face shield is designed for comfort, even during extended wear. The exact weight can vary slightly depending on the size and model of the helmet. Can the Ballistic Helmet with Face Shield withstand multiple bullet impacts? Yes, our ballistic helmet with face shield is designed to withstand multiple bullet impacts. The helmet and visor are tested to endure at least four hits each from .357 Magnum JSP and 9 mm FMJ, exceeding NIJ standards. Is the Ballistic Helmet with Face Shield comfortable for extended wear? Yes, the ballistic helmet is designed with a state-of-art interior padding system that ensures comfort during prolonged use. The padding can be adjusted for a customized fit. Can the visor on the Ballistic Helmet be replaced? Yes, the ballistic visor can be easily installed, adjusted, and removed thanks to the ARC rail system integrated into our helmet design. This makes replacing the visor a straightforward process. Is the Ballistic Helmet with Ballistic Face Shield suitable for use in all weather? Yes, our ballistic helmet with face shield is finished with an all-weather paint, making it suitable for use in various weather conditions. However, it is advised to store it properly when not in use to maintain its condition and prolong its lifespan. How is the visibility with the face shield? The visor is made of a clear, bubble-free polycarbonate material, providing unobstructed vision. Additionally, the visor does not fog up and won't restrict your breathing, ensuring maximum comfort and performance.
The only bulletproof helmets in service with multiple U.S. government agencies that can stop up to .50 cal AE and 7.62mm TKR. Mil-spec setup and Velcro™ parts with the capability to add ComTacs by 3M™. Over-engineered to be safer and last longer. Lifetime warranty for all parts and defects. You're supporting American jobs and workers that make quality products by hand. The MICH/ACH Ballistic Helmet is among the most protective headgear available. These comfortable, lightweight Aramid helmets stop the strongest handgun bullets with minimal impact on the wearer. Each MICH helmet features superior craftsmanship that armed forces and police units trust. Order a MICH/ACH Level IIIA+ ballistic helmet from Atomic Defense today! Industry-leading features: The ability to stop multiple bullet impacts - far above the current NIJ and industry standard. Accomplished with a lighter weight than the competition. Four-point leather chinstrap, tactical ARC rail system, waterproof coating, fireproof ballistic material, bullet-resistant. Ballistic resistance: NIJ Level IIIA+. Can stop 44 Magnum, 9mm, 45 cal, 40 cal, 38, 12 gauge slug, buckshot, and more. Testing: Our MICH helmet is tested above and beyond NIJ standards by testing 18 rounds of various calibers (including .22, .380, 9mm, .40 S&W, .38 Special, .45 ACP, .50 Cal AE, and .44 Magnum) on different areas of the helmet (NIJ requires 4 rounds per test). Certification: Each helmet comes with a QR-coded sticker to its certification sheet. It will show tested ammunition, angles, back-face deformation, distances, and more. MICH/ACH Ballistic Helmet Features Lightweight and higher performing than old Kevlar helmets, capable of NIJ IIIA+ Can stop 44 Magnum, 9mm, 45 cal, 40 cal, 38, 12 gauge slug, buckshot, and many more! In addition to these rounds, this helmet also protects against stab/spike attacks and shrapnel/fragmentation. Materials and craftsmanship are the same for civilians as it is for police and military. Tested above and beyond the latest NIJ standards. Rapid adjusting headband for quick and easy adjustments in the field. Fully adjustable 4-point chin straps with a cloth chin grip to ensure the perfect fit and maximum comfort. Memory padding that’s fully adjustable with Velcro. It can be removed, exchanged, and beaten up and still keep its shape for years to come. Feels hard at first? Leave it in for a minute. Tactical rail system with 2-point bungee and vertical + horizontal ARC rails for more efficient accessory mounting options. Low visibility paints and fabrics. This makes the helmet harder to see in the dark since it absorbs as much light as possible instead of reflecting it. Fire, water, and dust-resistant materials are used. All of our helmets come with a 100%, transferrable lifetime warranty on parts and labor. Size Head Circumference Hat Standard Inch cm US S/M/L 20 - 23 50 - 59 6 1/4 - 7 1/2 L/XL/XXL 22 - 27 57 - 69 7 1/8 - 8 1/2+ MICH/ACH Ballistic Helmet Specs Standard: NIJ IIA, II, and IIIA latest 0106.01 and 0108.01 standards surpassed in testing Aramid Shell Weight: 20-23" Size (2.5 lbs / 1.1 kg), 22-27" Size (2.9 lbs / 1.3 kg) Total Weight w/ All Accessories: 20-23" Size (3.42 lbs / 1.55 kg), 22-27" Size (3.6 lbs / 1.63 kg) Fits: See chart above (Head circumference measured starting above brow-line) Material: Aramid shell with foam interior padding Color: Black, Green, or Tan Sizes: S/M/L (Head Circumference = 20 - 23 in., Hat Size = 6 1/4 - 7 1/2) or L/XL/XXL (Head Circumference = 22 - 27 in., Hat Size = 7 1/8 - 8 1/2+) Complies with: US Standard - Mil STD 662 E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920 Stops: 9mm FIOCCHI, 115gr. (FMJ) 9mm WINCHESTER RANGER, 127gr. (SXT) .357 SIG, 115gr. (JHP) .357 SIG, 125gr. (GDHP) .40 CAL, 95gr. (HP) .44 Mag, 240gr. (SJHP) 7.62mm x 25mm TOKAREV NORINCO, 85gr. FMJ (STEEL JACKET) 7.62mm x 25mm TOKAREV FOREIGN, 85gr. FMJ (STEEL JACKET) 7.62mm x 25mm TOKAREV S&B, 85gr. FMJ (STEEL JACKET) .30-Cal Carbine, 110gr. (FMJ) .50 CAL American Eagle, 350gr. (JHP) 5.7mm x 28MM, 27gr. (SS195) 5.7mm x 28MM, 40gr. (HORNADY BLUE TIP) Other Compliance Standards: VPAM: PM 1-5 with PM 6 resistance. TR DE: SK L-2 with SK 3 resistance. HOSDB: HG1/A-HG2 with RF1 resistance. GOST: Class 1-2A with Class 3 resistance. GOST 2017: BR 1-3 with BR 4 resistance. What's in the box of the MICH/ACH Ballistic Helmet? Upgraded IIIA+ Helmet in selected color and size Straps and harness system (Color matched) Exterior Velcro (Color Matched) ARC rail system (Color matched) Bolts holding the ARC rails in place (Black) Bungees with self-hold integrated into the ARC rails (Color matched) NVG Shroud (Sometimes called the NVG mount) (Color matched) Interior Tan padding set (safety) Interior padding sets (one thin set and one thicker set). Padding sets can be mixed and matched as long as the tan safety padding remains. ARC to Picatinny adapter MICH/ACH Ballistic Helmet FAQ What is a MICH/ACH helmet? The MICH or Modular Integrated Communication Helmet was created in response to the weight of the previously used PASGT Helmet. The PASGT helmet was heavier and didn't have attachment rails or NVG mounts. So in order to mount anything to it, soldiers would have to carefully drill holes into their helmets, which could compromise the integrity of the Aramid in the helmets. The PASGT helmet was also very heavy, so many soldiers opted for the fully plastic Bump helmet so they could have their attachments without the weight of the PASGT helmet. The MICH helmet is lightweight and has NVG attachment capabilities and 4-way attachment rails already built in. How is this helmet different from the competition? This MICH/ACH ballistic helmet offers IIIA+ (aka 3A+) protection. This means that it rises to, then goes above and beyond in performance compared to most other helmets on the market. Our helmets are capable of taking multiple strikes, stabbings, shrapnel, etc. Some unique features include; highly adjustable interior padding, rigid exterior, smooth coat interior, all-weather and low-visibility paint, NVG mount, 4-way attachment ARC rail system, extra padding that's Velcro adjustable, bungees, cloth chin strap, materials that are fire, water, and dust-proof, and ratcheting head-capture system to fit almost any head size and shape. What attachments will this helmet take AND where can I get the ones that are pictured? We didn't want to force customers into some proprietary or non-standard system. So we use the ARC standard rail system and military configurations for all our mounts/rails. Standard multi-NVG mounts, shrouds, and standard ARC rail system just to name three. This lets you fit all those attachments you already have, plus all the after-market ones you might need in the field. Clear 3A Ballistic Face Shield for Helmets Are the rails, bolts, padding, bungee cords, velcro, and NVG included? Yes they are attached out of the box. Everything in the pictures that remains constantly in the pictures is included with every helmet. The only things not included at this price are the add-ons like the clear bulletproof visor or Comtac headphones. What is the lifespan of a bulletproof helmet? Bulletproof helmets made of Aramid, like this one, have a shelf life of 5 years when properly cared for. Because our helmet has an all-weather shield, it will last 5-7 years, depending on the care and use. What is the return policy? See our full exchange and return policy here. Understanding MICH and ACH Helmets The U.S. began using the Modular Integrated Communications Helmet (MICH) design at the start of the war in Afghanistan. After adopting the MICH model, slight improvements were made under the name Advanced Combat Helmet (ACH). MICH and ACH helmets are ideal for use with communications equipment because of their low-profile side brim. Four-point retention systems improve comfort while ensuring stability for the greatest impact reduction. Our Tactical rail systems (ARC) and higher front brows give these helmets compatibility with various attachments, including night-vision goggles and ballistic visors. Level IIIA+ Ballistic Protection Our MICH ballistic helmet offers Level IIIA bullet resistance and is tested beyond NIJ standards for Level IIIA. The National Institute of Justice (NIJ) requires helmets to withstand four shots, each to a different location on the helmet. The helmet's NIJ Level describes the types of bullets it can prevent from penetrating its surface and the speeds at which it resists penetration. The NIJ standard represents the only nationally accepted classification for body armor products. Level IIIA is the highest for bulletproof helmets. We first test our helmets to meet the NIJ's requirements of stopping .357 SIG FMJ rounds traveling at 1469.82 fps and .44 magnum rounds at 1430.45 fps. When we are sure that the helmet meets these standards, we fire additional rounds from other weaponry. You can count on this helmet to stop any of the following rounds and more: .44 Magnum .357 SIG 9mm 10mm .45 ACP .40 S&W .380 12-gauge slug and buckshot (safely from certain distances) The Latest Military-Grade Ballistic Helmets Available to the Public MICH and ACH are the latest available on the private market, as the U.S. recently began phasing in the new Enhanced Combat Helmet (ECH). The MICH design improves its predecessor, the Personnel Armor System for Ground Troops (PASGT). MICH and ACH helmets are lighter than prior models while fitting closer to the head for greater comfort and performance. The addition of attachment rails gives MICH helmets greater versatility than PASGT models. What ultimately sets our MICH/ACH Helmets above the rest is Level IIIA protection. These helmets withstand shrapnel, knives, and multiple gunshots from pistols or shotguns, making them the ideal choice in close-quarters combat. Order MICH/ACH Ballistic Helmets Online You can find a MICH or A
The only bulletproof helmets in service with multiple U.S. government agencies that can stop up to .50 cal AE and 7.62mm TKR. Mil-spec setup and Velcro™ parts with the capability to add ComTacs by 3M™. Over-engineered to be safer and last longer. Lifetime warranty for all parts and defects. You're supporting American jobs and workers that make quality products by hand. The MICH/ACH Ballistic Helmet is among the most protective headgear available. These comfortable, lightweight Aramid helmets stop the strongest handgun bullets with minimal impact on the wearer. Each MICH helmet features superior craftsmanship that armed forces and police units trust. Order a MICH/ACH Level IIIA+ ballistic helmet from Atomic Defense today! Industry-leading features: The ability to stop multiple bullet impacts - far above the current NIJ and industry standard. Accomplished with a lighter weight than the competition. Four-point leather chinstrap, tactical ARC rail system, waterproof coating, fireproof ballistic material, bullet-resistant. Ballistic resistance: NIJ Level IIIA+. Can stop 44 Magnum, 9mm, 45 cal, 40 cal, 38, 12 gauge slug, buckshot, and more. Testing: Our MICH helmet is tested above and beyond NIJ standards by testing 18 rounds of various calibers (including .22, .380, 9mm, .40 S&W, .38 Special, .45 ACP, .50 Cal AE, and .44 Magnum) on different areas of the helmet (NIJ requires 4 rounds per test). Certification: Each helmet comes with a QR-coded sticker to its certification sheet. It will show tested ammunition, angles, back-face deformation, distances, and more. MICH/ACH Ballistic Helmet Features Lightweight and higher performing than old Kevlar helmets, capable of NIJ IIIA+ Can stop 44 Magnum, 9mm, 45 cal, 40 cal, 38, 12 gauge slug, buckshot, and many more! In addition to these rounds, this helmet also protects against stab/spike attacks and shrapnel/fragmentation. Materials and craftsmanship are the same for civilians as it is for police and military. Tested above and beyond the latest NIJ standards. Rapid adjusting headband for quick and easy adjustments in the field. Fully adjustable 4-point chin straps with a cloth chin grip to ensure the perfect fit and maximum comfort. Memory padding that’s fully adjustable with Velcro. It can be removed, exchanged, and beaten up and still keep its shape for years to come. Feels hard at first? Leave it in for a minute. Tactical rail system with 2-point bungee and vertical + horizontal ARC rails for more efficient accessory mounting options. Low visibility paints and fabrics. This makes the helmet harder to see in the dark since it absorbs as much light as possible instead of reflecting it. Fire, water, and dust-resistant materials are used. All of our helmets come with a 100%, transferrable lifetime warranty on parts and labor. Size Head Circumference Hat Standard Inch cm US S/M/L 20 - 23 50 - 59 6 1/4 - 7 1/2 L/XL/XXL 22 - 27 57 - 69 7 1/8 - 8 1/2+ MICH/ACH Ballistic Helmet Specs Standard: NIJ IIA, II, and IIIA latest 0106.01 and 0108.01 standards surpassed in testing Aramid Shell Weight: 20-23" Size (2.5 lbs / 1.1 kg), 22-27" Size (2.9 lbs / 1.3 kg) Total Weight w/ All Accessories: 20-23" Size (3.42 lbs / 1.55 kg), 22-27" Size (3.6 lbs / 1.63 kg) Fits: See chart above (Head circumference measured starting above brow-line) Material: Aramid shell with foam interior padding Color: Black, Green, or Tan Sizes: S/M/L (Head Circumference = 20 - 23 in., Hat Size = 6 1/4 - 7 1/2) or L/XL/XXL (Head Circumference = 22 - 27 in., Hat Size = 7 1/8 - 8 1/2+) Complies with: US Standard - Mil STD 662 E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920 Stops: 9mm FIOCCHI, 115gr. (FMJ) 9mm WINCHESTER RANGER, 127gr. (SXT) .357 SIG, 115gr. (JHP) .357 SIG, 125gr. (GDHP) .40 CAL, 95gr. (HP) .44 Mag, 240gr. (SJHP) 7.62mm x 25mm TOKAREV NORINCO, 85gr. FMJ (STEEL JACKET) 7.62mm x 25mm TOKAREV FOREIGN, 85gr. FMJ (STEEL JACKET) 7.62mm x 25mm TOKAREV S&B, 85gr. FMJ (STEEL JACKET) .30-Cal Carbine, 110gr. (FMJ) .50 CAL American Eagle, 350gr. (JHP) 5.7mm x 28MM, 27gr. (SS195) 5.7mm x 28MM, 40gr. (HORNADY BLUE TIP) Other Compliance Standards: VPAM: PM 1-5 with PM 6 resistance. TR DE: SK L-2 with SK 3 resistance. HOSDB: HG1/A-HG2 with RF1 resistance. GOST: Class 1-2A with Class 3 resistance. GOST 2017: BR 1-3 with BR 4 resistance. What's in the box of the MICH/ACH Ballistic Helmet? Upgraded IIIA+ Helmet in selected color and size Straps and harness system (Color matched) Exterior Velcro (Color Matched) ARC rail system (Color matched) Bolts holding the ARC rails in place (Black) Bungees with self-hold integrated into the ARC rails (Color matched) NVG Shroud (Sometimes called the NVG mount) (Color matched) Interior Tan padding set (safety) Interior padding sets (one thin set and one thicker set). Padding sets can be mixed and matched as long as the tan safety padding remains. ARC to Picatinny adapter MICH/ACH Ballistic Helmet FAQ What is a MICH/ACH helmet? The MICH or Modular Integrated Communication Helmet was created in response to the weight of the previously used PASGT Helmet. The PASGT helmet was heavier and didn't have attachment rails or NVG mounts. So in order to mount anything to it, soldiers would have to carefully drill holes into their helmets, which could compromise the integrity of the Aramid in the helmets. The PASGT helmet was also very heavy, so many soldiers opted for the fully plastic Bump helmet so they could have their attachments without the weight of the PASGT helmet. The MICH helmet is lightweight and has NVG attachment capabilities and 4-way attachment rails already built in. How is this helmet different from the competition? This MICH/ACH ballistic helmet offers IIIA+ (aka 3A+) protection. This means that it rises to, then goes above and beyond in performance compared to most other helmets on the market. Our helmets are capable of taking multiple strikes, stabbings, shrapnel, etc. Some unique features include; highly adjustable interior padding, rigid exterior, smooth coat interior, all-weather and low-visibility paint, NVG mount, 4-way attachment ARC rail system, extra padding that's Velcro adjustable, bungees, cloth chin strap, materials that are fire, water, and dust-proof, and ratcheting head-capture system to fit almost any head size and shape. What attachments will this helmet take AND where can I get the ones that are pictured? We didn't want to force customers into some proprietary or non-standard system. So we use the ARC standard rail system and military configurations for all our mounts/rails. Standard multi-NVG mounts, shrouds, and standard ARC rail system just to name three. This lets you fit all those attachments you already have, plus all the after-market ones you might need in the field. Clear 3A Ballistic Face Shield for Helmets Are the rails, bolts, padding, bungee cords, velcro, and NVG included? Yes they are attached out of the box. Everything in the pictures that remains constantly in the pictures is included with every helmet. The only things not included at this price are the add-ons like the clear bulletproof visor or Comtac headphones. What is the lifespan of a bulletproof helmet? Bulletproof helmets made of Aramid, like this one, have a shelf life of 5 years when properly cared for. Because our helmet has an all-weather shield, it will last 5-7 years, depending on the care and use. What is the return policy? See our full exchange and return policy here. Understanding MICH and ACH Helmets The U.S. began using the Modular Integrated Communications Helmet (MICH) design at the start of the war in Afghanistan. After adopting the MICH model, slight improvements were made under the name Advanced Combat Helmet (ACH). MICH and ACH helmets are ideal for use with communications equipment because of their low-profile side brim. Four-point retention systems improve comfort while ensuring stability for the greatest impact reduction. Our Tactical rail systems (ARC) and higher front brows give these helmets compatibility with various attachments, including night-vision goggles and ballistic visors. Level IIIA+ Ballistic Protection Our MICH ballistic helmet offers Level IIIA bullet resistance and is tested beyond NIJ standards for Level IIIA. The National Institute of Justice (NIJ) requires helmets to withstand four shots, each to a different location on the helmet. The helmet's NIJ Level describes the types of bullets it can prevent from penetrating its surface and the speeds at which it resists penetration. The NIJ standard represents the only nationally accepted classification for body armor products. Level IIIA is the highest for bulletproof helmets. We first test our helmets to meet the NIJ's requirements of stopping .357 SIG FMJ rounds traveling at 1469.82 fps and .44 magnum rounds at 1430.45 fps. When we are sure that the helmet meets these standards, we fire additional rounds from other weaponry. You can count on this helmet to stop any of the following rounds and more: .44 Magnum .357 SIG 9mm 10mm .45 ACP .40 S&W .380 12-gauge slug and buckshot (safely from certain distances) The Latest Military-Grade Ballistic Helmets Available to the Public MICH and ACH are the latest available on the private market, as the U.S. recently began phasing in the new Enhanced Combat Helmet (ECH). The MICH design improves its predecessor, the Personnel Armor System for Ground Troops (PASGT). MICH and ACH helmets are lighter than prior models while fitting closer to the head for greater comfort and performance. The addition of attachment rails gives MICH helmets greater versatility than PASGT models. What ultimately sets our MICH/ACH Helmets above the rest is Level IIIA protection. These helmets withstand shrapnel, knives, and multiple gunshots from pistols or shotguns, making them the ideal choice in close-quarters combat. Order MICH/ACH Ballistic Helmets Online You can find a MICH or A
The helmet is not included unless purchased as a helmet and visor set here. Texas IIIA+ Ballistic Face Shield | Fits All Helmets with ARC The Atomic Defense Ballistic Face Shield is a Level IIIA/3A rated, bulletproof face shield designed for superior protection against a range of common rounds including 9mm, .44 Magnum, 45 cal, 40 cal, 38, 22 LR, and 12 gauge. It readily mounts to any helmets with the standard ARC rail system, including PASGT, ACH, MICH, and FAST models. Equipped with a 4-way adjustable mounting system, it allows the user to bring the shield closer or farther from the face and adjust it up or down for optimal comfort. The shield features a self-locking mechanism, enabling it to stay in place at three different locking-points: straight ahead, halfway up, or straight up and centered over the head. Texas NIJ IIIA+ Ballistic Face Shield Review Texas NIJ IIIA+ Ballistic Face Shield Features Level IIIA/3A rated and tested, capable of stopping multiple rounds from 9mm, .44 Magnum, 45 cal, 40 cal, 38, 22 LR, 12 gauge, and others. Mounts to any helmets equipped with the standard ARC rail system. 4-way adjustable mounting system that enables the shield to be brought closer to the face, moved away, or adjusted up and down. Self-locking mechanism that keeps the visor in place at three different locking-points - straight ahead, halfway up, or straight up and centered over the head. Adjustment levers on the sides for easy visor movement. Resistant to fire, water, and dust, ensuring maximum durability. Comes with a 100%, transferrable lifetime warranty on parts and labor. The visor is made from multilayered polycarbonate for maximum protection. Complies with various standards including the US Standard - Mil STD 662 E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920. What's in the box of the Texas NIJ IIIA+ Ballistic Face Shield? 3A visor Pre-attached brackets and ARC mounting system Fabric cover *Blemished NIJ IIIA+ Face Shields have minor cosmetic imperfections but perform perfectly well. Texas NIJ IIIA+ Ballistic Face Shield Specifications Model Number: NIJ IIIA (3A) Face Shield aka 3A Visor for Ballistic Helmets Material: Multilayered Polycarbonate Standard: NIJ IIIA (3A) Size: 5.9 in. by 15 in. / 150mm by 380mm Weight: 3 pounds / 1.342 kg Thickness: 0.86 in. / 22mm Compliance: US Standard - Mil STD 662 E, UK Standard - UK/SC/5449, NATO Standard - STANAG 2920 Adjustable: 4-way adjustable mounting Features: Fire, water, and dust resistance Warranty: 100%, transferrable lifetime warranty on parts and labor Compatibility: Mounts to any helmets with the standard ARC rail system. Compatible with PASGT, ACH, MICH, and FAST models. Atomic Defense NIJ IIIA+ Ballistic Face Shield FAQs How does the Ballistic Helmet Face Shield protect me? The Ballistic Face Shield is designed to stop multiple bullet types such as 9mm, .44 Magnum, 45 cal, 40 cal, 38, 22 LR, 12 gauge, and many more. Made from multilayered polycarbonate, it provides a robust barrier against close-range pistol and shotgun rounds, exceeding NIJ Level IIIA requirements. Does the Bullet Proof Face Shield affect visibility? No, the shield is designed to be as clear as glass. During production, we ensure each ballistic visor is free of bubbles and other imperfections that could compromise visibility. Is this face shield for ballistic helmet versatile in terms of attachment? Yes, our Ballistic Face Shield mounts to any helmets with the standard ARC rail system. It is compatible with a wide range of ballistic helmets, including PASGT, ACH, MICH, and FAST models. Can I adjust the position of the ballistic face shield? Yes, the shield features a 4-way adjustable mounting to bring it closer to the face, farther away, and up and down. The self-locking mechanism allows the visor to stay in place at three different locking-points — straight ahead, halfway up, or straight up and centered over the head. What is the warranty on the Ballistic Face Shield Level IIIA? All our visors come with a 100%, transferrable lifetime warranty on parts and labor. This ensures that you can rely on the quality and durability of our products.
Ballistic Half Face Mask Ballistic Half Face Mask is a protective gear designed to shield your face against various types of ballistic threats, offering a Level IIIA+ rating. Composed of Aramid fabric, known for its high compression and comfortable shaping, providing complete facial protection. It is equipped with high-quality EverLast-elastic straps, ensuring no loose feeling even after thousands of uses. Not only does it protect against ballistic threats, but this mask is also stab-proof, making it ideal for close quarter situations. The Ballistic Half Face Mask is designed to be resistant to fire, water, drop, and dust. Comes with an anti-reflective coating, enhancing stealth capabilities in low-light environments. It is compatible with all helmet types, ensuring a comprehensive defense when used in conjunction with a helmet. The mask has been rigorously tested and meets and exceeds NIJ 0101.06 standard, a testament to its reliability. It is lightweight, weighing only 2 pounds / 0.9kg, and available in a universal size. This mask is ideal for use in close-quarter situations where visibility is a top priority, and when additional head protection is worn. Ballistic Half Face Mask Review Ballistic Half Face Mask Features Ballistic resistance: Tested for NIJ Level IIIA+ ballistics resistance. Capable of stopping .44 magnum, 9mm, .38 special, 45 Auto, 40 S&W, and .357 SIG rounds. Compatibility: It can be used with all helmet types (requires adjustable helmet padding). Material: Made from high compression Aramid fabric for optimal shaping and comfort. Straps: Upgraded and lengthened EverLast-elastic straps ensuring secure fit even after thousands of uses. Padding: Fully padded across the forehead, temples, cheekbones, and cheeks for maximum protection. Versatile: Designed for use by special forces around the world, this mask ensures top-notch safety. Safety: Unlike other retailers' masks, this mask is rated and tested, minimizing the risk of bullet splatter and shrapnel. Stabproof: The mask is also designed to resist stabbings, making it ideal for close quarters situations. Resilience: Fabric is resistant to fire, water, drops, and dust. Stealth: Features an anti-reflective coating for stealth in low-light environments. What's in the box of the Ballistic Half Face Mask? NIJ level IIIA+ ballistic half-face mask Attached straps for secure fit Padding for comfort and protection Ballistic Half Face Mask Specifications Standard: NIJ IIIA+ ballistic mask, meeting and exceeding NIJ 0101.06 standards. Weight: Lightweight at 2 pounds / 0.9kg. Compatibility: Fits all helmets (adjustments to padding may be necessary). Color: Available in black for a sleek, professional look. Size: One-size-fits-all for convenience and flexibility. Compliance: Adheres to NIJ Level IIIA under both standards 0101.06 and 0106.01. Included in Box: Comes with straps and padding already attached. Resistance: Fire, water, drop, and dust-resistant fabric materials. Additional Features: Anti-reflective coating for stealth in low-light environments, stab-proof, and an upgraded and lengthened EverLast-elastic strap. Ballistic Half Face Mask FAQs Can the Ballistic Half Face Mask accommodate glasses or goggles? Yes, the design of our Ballistic Half Face Mask leaves enough space to comfortably wear glasses or goggles. However, it's recommended to try it on with your eyewear to ensure a comfortable fit. What is the lifespan of the Ballistic Half Face Mask? With proper care and maintenance, the mask can last for many years. However, it is advised to replace the mask if it has been struck by a bullet or shows signs of wear and tear. Is the Ballistic Half Face Mask adjustable? Yes, the mask comes with five-point elastic straps that allow for a secure and comfortable fit for all sizes. Is there a specific way to clean the Ballistic Half Face Mask? Yes, it's best to clean the mask with a damp cloth and mild soap, and let it air dry. Avoid exposing it to high temperatures or harsh chemicals. Is the Ballistic Half Face Mask resistant to harsh weather conditions? Absolutely, the mask is designed with fire, water, drop, and dust-resistant fabrics that can withstand harsh weather conditions. However, it's still recommended to store it in a dry, cool place when not in use. What Does Level IIIA+ Mean? Level IIIA+ indicates that a product has been tested beyond NIJ level IIIA under standard 0101.06. New NIJ Level IIIA armor can withstand .357 SIG bullets at speeds between 1,430 fps and 1,500 fps. It can also tolerate .44 Magnum bullets between 1,400 fps and 1,460 fps. We go above and beyond at our in-house testing center by firing numerous rounds. You can view performance certificates and watch testing videos online — get in touch to learn more.
For an easy weeknight dinner, look no further than this garlic sesame tofu! It's so easy to make, requires only 10 minutes of prep time and is completely vegan and gluten free.
This recipe for the Perfect Oven Pot Roast, in fact, is the perfect meal. The meat is slow cooked in the oven with carrots and onions until the meat is fall-apart-tender and the carrots are tender crisp.
This is my favorite peanut sauce recipe. It is made with just 6 key ingredients, and it is a great dipping sauce or dressing for salads.
This Creamy Mac and Cheese takes just minutes to prepare on the stovetop, contains two types of cheese, and is creamy, hearty, and delicious!
Hier findest du 25 Rezepte für die Heißluftfritteuse. Schnapp dir deinen Air Fryer und probier dich durch!
Our Beef Chuck Roast is braised slowly to create a wonderfully tender and flavorful meal!
This eel sauce is perfect for dipping in sushi or using as a marinade for fish or chicken.
Leckerer Nudelauflauf mit Schinken und Käse sowie einer einfachen Sahnesoße. Das Nudel-Schinken-Gratin ist schnell zubereitet und gelingt ohne Vorkochen.
Wer ein Low Carb Abendessen schnell zubereiten will, sollte diese Rezepte zum Abnehmen in den Speiseplan einbauen. Egal ob vegetarisch, mit Fleisch, mit Fisch, kalt oder warm: Wir zeigen dir die besten Low Carb Rezepte für ein Abendessen ohne Kohlenhydrate.