Découvrez notre article scientifique Horloge Nixie Tube RGB de chez Déco Science - 179,99 €

DIY KIT FOR IN-14 ARDUINO SHIELD NCS314 NIXIE TUBES CLOCK [TUBES, SOCKETS, COLUMNS, ARDUINO, POWER SUPPLY] [TEMP. SENSOR, GPS RECEIVER, IR REMOTE] Project “Divergence Meter mini” DIY KIT for IN-14 Shield Nixie Tubes Clock Arduino Shield Nixie Tubes Clock with Columns Designed for 6 IN-14 xUSSR Nixie Tubes with Sockets IN-14 Tubes are the most popular mass-produced Nixie Tubes Nixie Clocks are one of the most beautiful and popular Vintage Clocks Clock features Startup Tune, RGB backlight, USB port for updates Shield options include Tubes, Columns, Sockets and Power Supply Accessories include Temp. sensor, GPS Receiver, IR Remote Shield Clock is designed for Arduino UNO and MEGA 2560 Boards It allows you to write your own unique programs for the Arduino platform All the latest Source codes are always available on our GitHub channel PCB, Design, Schematics, Case and Software made by GRA & AFCH LISTING INCLUDES: Tubes Shield NCS314-6 Board Bare PCB Set of Electronic Parts and Components for Shield NCS314-6 Tubes Board Set of Hex Spacers and Screws for Shield NCS314-6 and Arduino Boards Set of Socket Pins for 6 IN-14 Nixie Tubes (optional, choose in selector) NE2H Neon Bulbs for Dots – 3 pcs (2 Neons for Dots and one spare) IN-14 Nixie Tubes – 6 pcs Set (included with the Shield Board) Columns with Dots – 2 pcs (optional, choose in selector) Arduino Control Board – UNO or MEGA (optional, choose in selector) Temp. sensor, GPS Receiver, Remote – by one pieces (optional, choose in selector) Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector) Principal Electrical Scheme for Shield NCS314-6 Tubes Board BOM List for Shield NCS314-6 Tubes Board User Manual on vintage style paper Shield Board features Socket pins for Nixie Tubes Columns with separating Dots are optional for the KIT Power Supply is optional for the KIT Nixie Clock support usage of basic Accessory – Temperature sensor Arduino Shield Clock support usage of advanced Accessories: GPS Receiver and IR Remote (with Arduino MEGA) OUR BENEFITS: All our Nixie Tubes Clocks are using HV513WG chips, it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1 We offer flexible Tubes Boards platform, that support many Nixie Tubes (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes) It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks Fast uploading pf the Firmware via USB to the Control Board All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI), drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux It is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platform We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic) Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use, Firmware version can be seen at the end of the POST test Our Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures We provide competent technical support for all our products SOFTWARE FEATURES: Shield supports IN-14 Nixie tubes – 6 pcs. Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS]. Full static display mode. Slot Machine (Anti poisoning – tubes saving function. Increases the service life). Temperature measurement [Celsius or Fahrenheit]. Digital temperature sensor (DS18B20, optional not included). GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector). Operation via IR remote control (Remote control Sony RM-X151, optional not included). Automatic information refreshing on the tubes. The maximum possible brightness of the tubes. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You…). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure. HARDWARE FEATURES: Highly Accurate RTC (Real Time Clock) DS3231SN with backup battery. Integrated high voltage power supply: 150 – 220V. High voltage adjusting potentiometer. 3 control buttons on board. 8 pcs RGB SMD LEDs. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Internal buzzer. Test points for testing, adjusting and controlling low and high voltage circuits. Plug for optional external GPS receiver (only with Arduino Mega). IR receiver TSOP4836 for optional IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote control, we strongly recommend the using of Arduino MEGA – works fluently. 3 pin connector for optional Temperature sensor (DS18B20; 1-Wire protocol). SPI up to 4MHz. Places for 2 column with 2 neon dots (digits separator). Independent controls for upper and lower dots. Power consumption: 12V, 760mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive “+”). Reverse polarity protection. Nixie Tubes Shield NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) DOWNLOADS: Firmware for Shield Board NCS314 gra-afch.com/downloads/firmware/firmware-for-board-without-cases/shield-board-ncs314-v1-0-1-2-shield-for-nixie-clocks/ USB Drivers for PC gra-afch.com/category/downloads/drivers/ Schematics for Shield BoardNCS314 gra-afch.com/downloads/schemes/shields/shield-board-ncs314-shield-for-nixie-clocks-2/ User manual gra-afch.com/downloads/manuals/user-manuals-for-nixie-tubes-clocks/ Shield Board's 3D model in STEP format gra-afch.com/downloads/drawings/shield-board-ncs314-shield-for-nixie-clocks/ Software: github.com/afch/NixeTubesShieldNCS314 Video tutorial: youtu.be/DQZWPn0iAHw RELATED PRODUCTS: Acrylic Case for Nixie Tubes Clock on IN-14: https://www.etsy.com/listing/580470149/acrylic-case-for-nixie-tubes-clock-on-in Small Wooden Case for Nixie Tubes Clock on IN-14: https://www.etsy.com/listing/608412156/small-wooden-case-for-nixie-tubes-clock?ref=listings_manager_table Wooden Stand for Nixie Clock on IN-14 Tubes: https://www.etsy.com/listing/704415811/wooden-stand-for-nixie-clock-on-in-14 SHIPPING AND RETURN INFORMATION All Items are shipped from Ukraine Via International registered Airmail Shipments are made within 1 business day After the payments are received and verified It takes about 4-7 days via UPS Express delivery It takes about 10-18 days via Standard shipping It takes about 35-45 days via Economy shipping We combine multiple Items to save on shipping UPS Express Shipping time (recommended): Europe: 3-5 days Germany: 3-5 days USA, Canada: 4-7 days Asia, South America: 5-7 days Australia, New Zealand: 5-7 days Africa, Central America: 5-7 days Standard Shipping time: Europe: 10-12 days Germany: 25-30 days USA, Canada: 10-15 days Asia, South America: 10-18 days Australia, New Zealand: 12-18 days Africa, Central America: 12-18 days Economy Shipping time: Europe: 25-30 days Germany: 25-30 days USA, Canada: 30-35 days Asia, South America: 35-45 days Australia, New Zealand: 45-55 days Africa, Central America: 45-55 days Return Policy All Returns are accepted For Return you should contact Us within 14 Days after receiving the Item Refunds are made as Money back or Replacements (buyer’s choice) Return shipments are paid by the buyer No restocking fees are charged

CARACTERISTIQUE DE L'HORLOGE À TUBE NIXIE: Conception sophistiquée : traité antirouille et anti UV  Mécanisme renforcé, silencieux et perdurable Style d'horloge : Numérique.  Les horloges sont garanties durant 2 ans à partir de l'achat LIVRAISON CLASSIQUE OFFERTE Le temps est une denrée précieuse, et pouvoir le mesurer est une opportunité qu'il ne faut pas négliger. Lorsque vous effectuerez votre choix, n'oubliez pas, qu'une horloge murale peut complètement changer l'ambiance d'une pièce. ÉLÉGANCE INTEMPORELLE : L'HORLOGE À TUBE NIXIE - L'ART DE MESURER LE TEMPS Découvrez l'élégance intemporelle de notre Horloge à Tube Nixie, une pièce de technologie vintage réinventée pour les amoureux du rétro-futurisme. Cette horloge fusionne parfaitement le charme classique des tubes Nixie avec une précision numérique de pointe, créant ainsi une pièce maîtresse unique pour votre intérieur. Les tubes Nixie, autrefois utilisés dans les premiers calculateurs, affichent l'heure avec une esthétique rétro, évoquant une époque où l'horlogerie était un art. Notre horloge avec tube Nixie incarne cette nostalgie tout en offrant une technologie de pointe pour une précision inégalée. L'histoire derrière chaque tube Nixie est fascinante : ces composants ont été sauvés de l'oubli par des passionnés de l'électronique, préservant ainsi un héritage unique. Chaque Horloge à Tube Nixie que nous proposons est le fruit d'un travail artisanal méticuleux. Avec son mélange harmonieux de tradition et de modernité, notre Horloge numérique est bien plus qu'un simple accessoire. C'est un héritage du passé qui trouve sa place dans le monde numérique d'aujourd'hui. Ajoutez cette pièce exceptionnelle à votre décor, et chaque fois que vous vérifierez l'heure, vous ressentirez la magie intemporelle de l'horlogerie. Laissez cette Horloge avec Tube Nixie être le témoin silencieux de votre temps.

This innovative clock is the perfect addition to any desktop setup, boasting a dazzling RGB full-color display that is sure to impress. Whether you're a tech enthusiast or simply appreciate a well-crafted timepiece, our RGB Neon Tube Clock is a must-have accessory! SPECIFICATION: Power: 5V/1A; 0.8W Material: Acrylic + Aluminum Functions: Wifi Time Synchronization, Voice Broadcast Power Supply: Micro TypeC FEATURES: 7 Display Modes RGB Full Color Display 16 Million Colors 5 Levels Of Brightness BLACK TECHNOLOGY ATMOSPHERE LIGHT 16 MILLION COLORS LONGER LIFESPAN Featuring a vintage aluminum body. GRADIENT MODE The color of the time digits shifts gradually from left to right. DEDICATED GRAPHICS CARD AND SYNCHRONIZED THROUGH WIFI This clock provides unparalleled accuracy down to the millisecond. DETAILS Instruction Manual 1: The network configuration operation needs to be performed within two minutes after the clock is powered on. If the network configuration operation is not performed within two minutes, the clock will automatically enter the off-network mode. If you want to configure the network later, you need to power on the clock again. (running in offline mode, without WIFI time service function, the clock integrates a high-precision real-time clock chip, and the annual error is less than 5 minutes), in offline mode, you can use two mobile phones to check the time: one mobile phone to open a hotspot, use Another mobile phone configures the network for the clock. After the configuration is successful, the clock will automatically calibrate the time, and then turn off the hotspot of the first mobile phone. 2: The method of changing the network of the clock: After the clock is configured with the network, turn off the WIFI connected to the clock, and power on the clock again. If the clock cannot find the previously connected WiFi, it will automatically send out a hotspot and wait for the network to be reconfigured.  3: After the mobile phone is connected to the network, press and hold the red button (let go for about a second) to switch the display mode. There are 7 built-in display modes in this machine: monochrome mode, magic color mode; divine light mode; flowing water mode; world line beating mode; Breathing mode; power off mode. Long press the yellow button to increase the brightness, long press the green button to decrease the brightness. 4: In (monochrome mode; divine light mode; world line beating mode; breathing mode), short press the red button to enter the color matching mode. At this time, the clock displays 100000. Short press the yellow or green button to display the color of the light tube of 1 It will change. After adjusting to a satisfactory color, short press the red button to debug the color of the second lamp. At this time, the clock displays 010000. Short press the yellow or green button to adjust the color, and so on to adjust the sixth lamp. After tube color, short press the red button to exit the toning mode.

Découvrez notre article scientifique Horloge Nixie Numérique de chez Déco Science - 128,99 €

An old gas lamp used by plumbers to solder lead pipes. It was transformed in an unique nixie clock. Technical specifications: - ambient RGB lighting around the nixie tube. The lighting is adjusted via button at the top of the lamp. - one IN-18 nixie tube. - display time: H:M with a single digit - the assembly can be sat on a table or your favourite flat object. Using only high quality materials in the production and carefully processed with the help of high precision machines, the finished product has an premium and elegant appearance. We hope that you enjoy this piece of art! .

Saftige Zucchinipuffer: Sie werden ohne Öl im Ofen zubereitet.

New version with sockets is available here: https://www.etsy.com/listing/633627076/in-14-nixie-tubes-clock-arduino-shield _________________________________________________________________________________________ | | | SHIPPING CAN BE UPGRADED TO UPS (DHL) FOR 3-5 DAYS DELIVERY TIME | |_________________________________________________________________________________________| IN-14 Nixie Tubes Clock Shield NCS314 for Arduino UNO/MEGA The Arduino Nixie Tubes Shield NCS314 allow You to make 6 digits Nixie Tubes Clock in “Divergence Meter Mini” style (by GRA & AFCH). Or You can just display any 6 digits numerical strings on this IN-14 Nixie Tubes, made in xUSSR. Hundreds of thousands of Arduino Boards are already inspiring people creativity all over the world, everyday. Only Arduino Mega supports additional accessories such as remote control and external GPS receiver for time synchronization. There are no other differences. PCB design, schematic, cases and software made by GRA & AFCH. Nixie Clock Shield NCS314 compatible with Arduino Uno and Mega, so it allows you to write your own unique programs on the Arduino platform. The latest sources files are always available on github.com/afch/NixeTubesShieldNCS314/. Downloads Firmware for Shield Board NCS314 gra-afch.com/downloads/firmware/firmware-for-board-without-cases/shield-board-ncs314-v1-0-1-2-shield-for-nixie-clocks/ USB Drivers for PC gra-afch.com/category/downloads/drivers/ Schematics for Shield BoardNCS314 gra-afch.com/downloads/schemes/shields/shield-board-ncs314-shield-for-nixie-clocks-2/ User manual gra-afch.com/downloads/manuals/user-manuals-for-nixie-tubes-clocks/ Shield Board's 3D model in STEP format gra-afch.com/downloads/drawings/shield-board-ncs314-shield-for-nixie-clocks/ Delivering list: Assembled NCS314 board – 1pc. IN-14 Nixie Tubes – 6pcs. IN-3 Neon lamps – 2pcs. Set of hex spacers and screws. User manual on vintage-style paper. Printed electronic shematics. This listing does NOT contain the Arduino board, GPS, Remote and power supply. All of accessories are available to buy below. We are selling already programmed Arduino UNO here: www.ebay.com/itm/162377278951 Programmed Arduino Mega: www.ebay.com/itm/162377285626 Power supplies: www.ebay.com/itm/162367596648 Glass Column with dots: www.ebay.com/itm/162276387248 GPS Receiver GA-6: https://www.ebay.com/itm/162682147400 IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139 …And upload software into your arduino Software: github.com/afch/NixeTubesShieldNCS314 Video tutorial: youtu.be/DQZWPn0iAHw Our Benefits: Easy to build beautiful clock – we also offer Clock case in two versions: economic Acrylic case and outstanding Wooden case. Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB. The latest version of the firmware is always available on GitHub. No need for additional drivers– we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu. Very high qualty of PCB. Japan alluminium capacitors. Power-On Self-Test. Competent Technical support. Dear customers! If you have ANY questions, (PLEASE ASK us) gra-afch.com/support/contact-us/. Software Features: 6 digits IN-14 Nixie tubes [hh:mm:ss]. 12/24 hour format. Date format: DD:MM:YY. Full static display mode. The maximum possible brightness of the tubes. Slot Machine (Anti poisoning – tubes saving function. Increases the service life). Temperature display [Celsius or Fahrenheit] (optional, choose in selector) GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector) IR remote controls (Remote control model Sony RM-X151/RM-X153, optional, choose in selector). IR protocol SIRC or any protocol if you able to implement it. Automatic update information on the tubes. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You…). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segement failure. Hardware Features: Integrated adjustable High Voltage Power supply: 150 – 220 V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control. IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA – works fluently. Temperature sensor connector (DS18B20; 1-Wire protocol). 8 pcs of RGB SMD LEDs. SPI up to 4Mhz. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots. Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive “+”). Reverse polarity protection. Nixie Tubes Clock Shield NCS314 IN-14 size: 200(L) x 90(H) x 53.34(W) mm (7.87 x 1.2 in). https://youtu.be/58xMATPCJ-I Manual Related products: Acrylic Case for Nixie Tubes Clock on IN-14: https://www.etsy.com/listing/699742183/acrylic-case-for-clock-on-in-14-nixie?ref=listings_manager_table Wooden Stand for Nixie Clock on IN-14 Tubes: https://www.etsy.com/listing/685900746/wooden-stand-for-nixie-clock-on-in-14 Small Wooden Case for Nixie Tubes Clock on IN-14 Tubes: https://www.etsy.com/listing/613581944/small-wooden-case-for-nixie-tubes-clock SHIPPING AND RETURN INFORMATION All Items are shipped from Ukraine Via International registered Airmail Shipments are made within 1 business day After the payments are received and verified It takes about 4-7 days via UPS Express delivery It takes about 10-18 days via Standard shipping It takes about 35-45 days via Economy shipping We combine multiple Items to save on shipping UPS Express Shipping time (recommended): Europe: 3-5 days Germany: 3-5 days USA, Canada: 4-7 days Asia, South America: 5-7 days Australia, New Zealand: 5-7 days Africa, Central America: 5-7 days Standard Shipping time: Europe: 10-12 days Germany: 25-30 days USA, Canada: 10-15 days Asia, South America: 10-18 days Australia, New Zealand: 12-18 days Africa, Central America: 12-18 days Economy Shipping time: Europe: 25-30 days Germany: 25-30 days USA, Canada: 30-35 days Asia, South America: 35-45 days Australia, New Zealand: 45-55 days Africa, Central America: 45-55 days Return Policy All Returns are accepted For Return you should contact Us within 14 Days after receiving the Item Refunds are made as Money back or Replacements (buyer’s choice) Return shipments are paid by the buyer No restocking fees are charged

For an easy weeknight dinner, look no further than this garlic sesame tofu! It's so easy to make, requires only 10 minutes of prep time and is completely vegan and gluten free.

Découvrez notre article scientifique Horloge Nixie Tubes en Quartz de chez Déco Science - 209,99 €

IN-18 NIXIE TUBES CLOCK [4 6 8 TUBES] [TUBES, COLUMNS, TEMP. SENSOR, POWER SUPPLY] NOTE: UPS EXPRESS DELIVERY IS HIGHLY RECOMMENDED ECONOMY SHIPPING CAN BE VERY SLOW AND UNRELIABLE Project “Divergence Meter” Nixie Tubes Clock with Columns Designed for 6/8 IN-18 xUSSR Nixie Tubes with Sockets IN-18 Tubes are one of the biggest mass-produced Nixie Tubes Nixie Clocks are one of the most beautiful and popular Vintage Clocks Clock features Startup Tune, RGB backlight, USB port for updates Nixie features Sockets and options include Tubes, Columns, Power Supply Pluggable Accessories include compact external Temperature sensor Nixie Clock is fully compatible with Arduino platform program codes It allows you to write your own unique programs for the Arduino platform All the latest Source codes are always available on our GitHub channel PCB, Design, Schematics, Case and Software made by GRA & AFCH LISTING INCLUDES: - Nixie Tubes Clock with Sockets (NCT318+NCM109 Boards) - Tubes Boards for 4, 6, 8 Tubes (optional, choose in selector) - IN-18 Nixie Tubes – 6 pcs Set (optional, choose in selector) - Columns with Dots – 2 pcs (optional, choose in selector) - Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector) - User Manual on Vintage style paper TUBES ARE OPTIONAL FOR THE CLOCK!!!!! Nixie Board features Socket pins for Nixie Tubes Columns with separating Dots are optional for the Clock Power Supply is optional for the Clock OUR BENEFITS: - All our Nixie Tubes Clocks are using HV513WG chips, - it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1 - We offer flexible Tubes Boards platform, that support many Nixie Tubes - (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes) - It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks - Fast uploading pf the Firmware via USB to the Control Board - All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel - No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI), - drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux - It is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platform - We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic) - Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock - Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use, - Firmware version can be seen at the end of the POST test - Our Tubes Boards use Unique detailed Tube test, soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures - We provide competent technical support for all our products SOFTWARE FEATURES: Clock support many kinds of Nixie tubes (4 tubes [hh:mm], 6 tubes [hh:mm:ss] and 8 tubes [hh:mm:ss:uu/Temp]). 12/24 hour format. Date format: DD:MM:YY Slote Machine (Ani poisoning) Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Software based on Arduino sketch, so MCU has Arduino bootloader within. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. HARDWARE FEATURES: Shematic that prevent “blue spot” effect inside IN-18 tubes. Full static displaying mode. No flickering. High brightness. High contrast. Integrated High Voltage Power supply 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjust and control low and high voltage circuits. Pads for internal buttons and terminals for external buttons. Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector. 2 dots column with separate controls upper and lower dots. Power consumption: 12V, 1000mA (Recommended power source: voltage 12V, current 1-2A). MCU board NCM107 has world smallest size: 100 x 50mm. Tubes board NCT318 size: 264 x 50mm. Tubes board NCT818 size: 94 x 50mm. Content description (depending of selector) 6xTubes PCBA for IN-18 listing includes: RELATED PRODUCTS: Acrylic Case for 6 Nixie IN-18 Tubes Clocks based on NCM109 boards https://www.etsy.com/listing/702924301/acrylic-case-for-6-nixie-in-18-tubes?ref=listings_manager_table Wooden Case for 6 IN-18/Z5660M/ZM1042 Nixie Tubes Clock: https://www.etsy.com/listing/690569992/wooden-case-for-6-in-18z5660mzm1042 Wooden Case for 8 IN-18/Z5660M/ZM1042 Nixie Tubes Clock: https://www.etsy.com/listing/690574734/large-wooden-case-for-8-in SHIPPING AND RETURN INFORMATION All Items are shipped from Ukraine Via International registered Airmail Shipments are made within 1 business day After the payments are received and verified It takes about 4-7 days via UPS Express delivery It takes about 10-18 days via Standard shipping It takes about 35-45 days via Economy shipping We combine multiple Items to save on shipping UPS Express Shipping time (recommended): Europe: 3-5 days Germany: 3-5 days USA, Canada: 4-7 days Asia, South America: 5-7 days Australia, New Zealand: 5-7 days Africa, Central America: 5-7 days Standard Shipping time: Europe: 10-12 days Germany: 25-30 days USA, Canada: 10-15 days Asia, South America: 10-18 days Australia, New Zealand: 12-18 days Africa, Central America: 12-18 days Economy Shipping time: Europe: 25-30 days Germany: 25-30 days USA, Canada: 30-35 days Asia, South America: 35-45 days Australia, New Zealand: 45-55 days Africa, Central America: 45-55 days Return Policy All Returns are accepted For Return you should contact Us within 14 Days after receiving the Item Refunds are made as Money back or Replacements (buyer’s choice) Return shipments are paid by the buyer No restocking fees are charged

Easy Mexican Street Corn- this street corn is super easy to make on the grill and is the perfect side dish that everyone will enjoy! #summer #grilling

Zucchini Pesto selber machen ist mit meinem Rezept ganz einfach! Probier's aus und überzeug dich von einer weiteren Variante vom grünen Pesto.

Mexican Street Corn Salad Recipe – This salad bursts with traditional Mexican flavors, like cotija cheese and chili, combined with the sweetness of the grilled corn. It’s a unique twist…