Maximizing overlooked spaces with corner shelving could be a game-changer, while ladder shelves add versatility to your setup. Modular units offer

TV wall unit with doors to hide TV

A handsome grey scale finish and ample storage options make this Crosswater Arena Single Drawer 600mm Wall Hung Vanity Unit the perfect blend of style and functionality to enhance any bathroom. This single drawer unit features a soft-closing, spacious drawer for storage of toiletries close by but out of sight. The product comes with inclusive wall brackets and a warranty of 10 years on furniture, Lifetime on the ceramic basin. Key Features ✔Available Finishes: Modern Oak, Steel, Pure White Gloss, Portland Grey Matt ✔Soft close pull to open ✔Materials: Carcass and drawer front 18mm melamine faced board drawer set 18mm melamine faced board ✔Ten years of warranty on furniture and Lifetime warranty on ceramic basin against any manufacturing defects Available Width: 600mm, 700mm Single drawer unit Size of unit In [mm]: 375mm x 450mm [Depth x Height] Size of unit In [cm]: 37.5cm x 45cm [Depth x Height] Cut out for services Open back Recommended use: Domestic, residential Installation: wall-hung Specification: full extension soft close drawers - 30kg weight capacity, Anti-tip wall hangers 170Kg capacity Fitting: wall hangers integrated into the carcass Wall brackets supplied Refer to the technical diagram for the complete technical dimension Download Installation Instruction PDF File from the Additional Info Section The tap and handle shown in the image are not included

Key Features:Unique curved design and wood finishWall hung unit with soft close drawersSupplied pre-assembled780 x 500 x 440mm vanity unit800 x 450mm countertop basin15-year guarantee as standardWhat's Included:1x Regis Forma Wood Wall Hung Vanity Unit1x Single Tap Hole Resin BasinAll fixings - 800mmPlease note: a tap and waste are not included but can be purchased separatelyRegis are a luxury brand that pride themselves on being affordable, giving you the very best of both worlds. The new Forma bathroom collection is no different. Boasting a range that is elegant, contemporary, and extremely functional, enjoy style and practicality in your home. The modern vanity unit provides ample storage and comes with soft-close drawers, resulting in the longevity of your furniture and noise being kept to a minimum, perfect for late-night or early-morning bathroom trips.Luxurious curved designOur top-of-the-range Regis furniture stands out from the crowd thanks to its gorgeous curved design. The basin edge flows with the vanity unit for a product that not only looks luxurious but feels it too.Soft close drawersNo high-quality bathroom furniture should be without soft-close drawer rollers. They stop the drawer from banging shut and increase the longevity of your furniture. They're also great for those late-night or early-morning trips to the bathroom, keeping noise to a complete minimum!Single tap hole resin basinA bathroom basin needs to be made of pretty stern stuff to put up with the chemicals, lotions and potions that we wash away down them which is why our Regis vanity units feature a high-quality resin basin that is guaranteed to last. Resin as a material provides a stain and scratch-resistant surface that’s not only easy to clean but looks fantastic too! On top of that, it comes with a pre-drilled single tap hole so you can fit any basin mixer tap you want.Handleless designThese units are seen as handless but that's only because of their ultra-clever design. The handles are actually integrated into the top edges so there's no blingy chrome. Just simple, effective, and minimalistic styling.Ample storage spaceTwo large drawers give you more than enough space to store all your bathroom essentials. You don't even lose out on space to the basin waste thanks to the shroud inside the top drawer.

System Cado (Wood Bracket System) Parts available. Read below for availability! This listing is for original replacement PAIRS of brackets for those who have lost them. Limited quantities left. We have a few odds and ends for System Cado and Royal System. Read below for details. We recently acquired a storage unit of Poul Cadovius wall unit parts owned by a man who worked installing these wall units in NYC in the 60s and 70s. Shelves: We have one 15"D in teak that do not have corresponding brackets available. $200/ea Everything else SOLD OUT. No rails SOLD OUT. Odds and ends: spare sliding doors in both wood and glass in different woods and sizes. Interior shelves, interior dovetailed drawers. Under shelf lighting and more. Please get in touch with exactly what you need and I will promptly respond with prices and availability. Royal System (Metal Brackets) Parts also available in another listing.

This is my DIY Built In / Wall Unit made for 60" TV. I used three in stock brown maple Home Depot upper kitchen cabinets (30" wide x 18" high x 12" deep), plywood, bead board, 1x2 & 1x3 boards and some decorative moulding! The cabinets required three coats of primer and five coats of paint. I used Olympic Interior Latex paint in Satin finish. The color is "Crumb Cookie". Starting Out: You have to have an idea of size, style and color. I had a very big wall and needed something big enough to fill the wall space, but not intrude on the living space. The perfect solution was to buy in stock wall mount kitchen cabinets because they are only 12" deep. Now, what to do with them? My original drawing was just scratch paper with two cabinets with a 60" TV. We soon realized we needed one more cabinet. Thankfully, Home Depot was having a 25% off sale on all in stock kitchen cabinets. Tools, Skills & Time: Living in the Northeast with lots of expected snowfall is the perfect time to build things. We stayed pretty close to the sketch and kept the TV on the wall during the entire build in order to get exact dimensions around the TV. This is not our first DIY project, but was the most time consuming, mostly because I'm a little fussy and this was going to be part of our living room. I would say we have an intermediate skill level. We spent two weekends constructing the unit and multiple hours priming and painting. We used a table saw, circular saw, chop saw, jig saw, tape measure, pencil, square, level, screw gun, brad nail gun and shims. I'm sure there are better tools for this job, but this is what we had in the garage. Cost: Approximaty $600-$800, excluding the cost of tools depending on the detail and your skill level. We used three kitchen wall cabinets which retail for $129, but we got them 25% off. The plywood was around $35 / 4x8 sheet. We used four sheets and had some leftover. The 1x2x8 and 1x3x8 pine boards were around $5-$6 each. We used roughly eight 1x2x8 and two 1x3x8 boards. A box of bead board for the back of the shelving and top was $20 and finally added some knobs. The Base: This was fairly simple. We built a small frame out of 2x4's roughly 14 1/2 inches deep by 7 1/2 inches high by 7 ft 11 inches long. Once that was assembled, we covered it with 1/2" birch sanded plywood using a small brad nail gun. Once the birch plywood was added, the unit is 8 ft wide by 15" deep (before finish trim). This was intentionally made 8 ft wide to use full sheets of plywood for the rest of the unit. The overall depth at the base once the finish trim is added is 8 ft 2 inches wide by 16 inches deep. Setting the Cabinets: In order to space out the cabinets evenly, we used a 1x3 as a guide between each cabinet and on each end. The 1x3's were attached permanently later. To give the cabinets a more custom look, we also ran a 1x2 above and below all the cabinets which were later attached permanently on the front of the unit. We did not buy full overlay door cabinets and I didn't want to see the cabinet frame. To allow for the 1x2 spanning the length of the unit above and below the cabinets, we used 3/4" plywood under all of the cabinets and on top of all of the cabinets prior to the next step. The 3/4" plywood gives the cabinets a little height in order to have a 1/4" space above and below the cabinet doors. We placed the 3/4" scrap plywood at 13 1/2" and placed the cabinets on top of that allowing for a 1 1/2" gap between the back of the cabinet and the wall. We did not necessarily need a gap, I just wanted the base to look slightly deeper than the side shelving. The overall distance from the wall to the front of the cabinet door is 14 inches. Media Storage: We cut two pieces of 1/2" sanded birch plywood 15 inches wide by 8 feet long. Using a brad nail gun, we attached a small piece of plywood to each end (15 inches by 8 inches). We then added a smaller piece of plywood to be spaced between the pieces of plywood to provide strength and spacing for the media equipment (DVD Player, Sound Bar, Cable Box). The overall height of the media box is 8 inches, but we added a 1x2 across the top making the actual opening only 7 inches. We also put a 1x3 over the plywood edges on the ends and spacers later. Side Shelving: Two more simple boxes for vertical shelves made out of 1/2" sanded birch plywood. The sides of the box were cut at 42 inches by 11 1/4 inches. They were attached together by cutting another piece of plywood for the back at 42 inches by 16 inches and one piece for the top at 11 1/4 inches by 16 inches. The back piece of plywood was ultimately covered with bead board so we used scraps for that. To add the finished look, 1x2 boards were added to the top and sides of the shelving. Note: we do not have a bottom for the side shelves. They rest directly on top of the media storage box created above. The Top: Sensing a theme here? Yep, another box. This was customized slightly to allow for large crown moulding around the top. We ended up piecing the top because the length was longer than an 8 foot sheet of plywood, but at 8 feet high, we didn't care. The bottom sheet of plywood was cut at 94 1/2 inches by 11 1/4 inches in order to fit directly on top of the side shelving. The top section/sheet was made to be 103 inches long by 15 inches deep. The front and sides of the very top board had to overhang all three sides for the crown moulding. The two ends were cut at 19 inches by 11 1/4 inches. The middle spacers were cut at 17 1/2" inches by 11 1/4 inches (two in total). The overall top box is 19" high. However, I wanted to display items flush with the top of the 1x2, so we added 1/2" spacers, then added another full sheet of 1/2" sanded plywood. So, the inside depth of the box is only 17 1/2" due to the additional spacers and 1/2" plywood in order to create a flush affect where the top 1x2 sits. The spacing of the dividers in the top box follow the spacing with the media storage spacing. The overall height of this top box was 19 inches to allow for a light in each section to be hidden behind the crown moulding. We bought "Hampton Bay 6-Light Black Under Cabinet Xenon Puck Light Kit with a Dimmer" at Home Depot. The Model# is EC1333BK, SKU# 818313, $39.97. You can connect up to 6 lights into the outlet box they provide and then plug the outlet box into the wall, which we fished behind the trim and the TV. Adding the Trim and Shelves: Shelving using 1/2" sanded plywood was spaced equally between each shelf. We cut some shelf supports out of extra 1x2's to hold the shelves, but you could also buy removable shelf brackets. We attached 1x2 boards to the sides, front and each shelf and top to give everything a finished look using a brad nail gun. Hiding the Wires: We were fortunate enough to have had wiring planned for a wall mount TV, but by adding a media area, we ended up with visible wires hanging down behind the TV. What to do? Attach two 2x4's horizontally between both side shelves with a hole cut close to the wall in the top of the media area. And, then cover it all with a piece of 1/2" sanded birch plywood. We did caulk the back piece of plywood all around the media storage and side shelving after it was attached to the 2x4's. Base/Cabinet Trim: We added a 1/2" sanded birch plywood board to each side (13 1/2 inches deep by 19 inches high) prior to adding the 96" 1x2 horizontal boards that spanned the entire length above and below the cabinets. We also flipped a piece of baseboard trim upside down around the top of the base that sits underneath the cabinets and gave it a little softness by running a router across that top edge. There happened to be an outlet in the wall behind the middle cabinet, so we just cut the back out using a jig saw. We also cut holes in the back of the media storage to fish media wires into the cabinets. We finished it off by adding the vertical 1x3 pine boards between the cabinets, media storage and each side/end. We actually doubled them up by putting one 1x3 on top of another 1x3 for a little depth. Another piece of baseboard trim was run along the floor and tied into the wall baseboard trim to give it that custom built in look. Planning Ahead: Although we're calling it a Built In, we realize technology will out live this unit. The solution? We only attached everything below the TV to the wall. Everything else fits like a puzzle and can be removed when the next big thing is invented. Decorative Moulding: Adding a few extra touches can really make a DIY project stand out. It may even look professionally built. We added chunky crown moulding around the top as well as some small decorative trim where the top sits on the side shelf boxes as well as the media storage/cabinets. Priming/Painting: While I would have loved to have sprayed this unit, we built it in place and it was not possible. The cabinets required a lot of sanding and priming to cover the original brown finish. But, it turned out beautiful and looks like it was built with the house. When we were building our house, we did a walk through of another house our builder was building and fell in love with the wall colors used. Unfortunately, it's a custom color from Sherwin-Williams and there is no official name for the wall color. We used this same color for our house and painted all interior walls with this color. This is the picture of the tag on the top of the paint can if you would like to replicate. They can scan the bar code and color match from that. The window and floor trim is just basic Bright White in Semi-Gloss. Materials List: 4 sheets of 1/2" Birch Sanded Plywood 8 - 1x2x8 Select Pine Boards 2 - 1x3x8 Select Pine Boards 3 - 30" W x 18" H x 12" D kitchen wall cabinets (Home Depot - Cambria Wall Cabinet - KW3018-CHR, SKU# 248306) 1 pack of Cape Cod 14 sq. ft. Beadboard Wide Plank Paneling (3 pack at Home Depot) 1 pack of Under Cabinet Light packs (Home Depot - EC1333BK, SKU# 818313) 4-5 2x4x8 boards 10-12 feet of chunky Primed Pine Crown Moulding (under top shelf) 5-6 pieces of Decorative Trim (Home Depot - 5/16" x 11/16" x 8 feet - Model 244, SKU# 353-436) 6 Knobs or Pulls Scrap Plywood for behind bead board (less than 1 sheet) Paintable Caulk Primer Paint

Discover the charm of Scandinavian design with our Modern Oak Bathroom Vanity Unit. Custom-built from fine oak wood, this unit not only offers elegance but also practicality for your bathroom needs. Key Features: Scandinavian Aesthetics: Embrace a minimalist and contemporary design that complements any modern bathroom. Adaptable Sizes: Select from widths ranging from 400mm to 800mm or request a bespoke size to fit your specific requirements. Space-Saving Design: Our wall-hung unit maximizes bathroom space, creating an open, airy feel. Personalized Finishes: Available in classic oak or a custom color of your choice to match your bathroom décor. Robust Worktop: Features a 22mm thick worktop, ensuring durability and longevity. Customizable Dimensions: Height is adjustable to your preference, with depths of 350mm, 400mm, or custom options. Self-Installation Flexibility: Tap holes are to be drilled by the customer, with support available if needed. Maintenance Guidelines: Water-resistant construction requires immediate drying of spills to maintain its condition. Note: Does not include sink,basin tap and waste. Elevate your bathroom with our Scandinavian Style Vanity Unit, offering a blend of functionality and minimalistic beauty.

Create the look you've always dreamed of in your bathroom with the slimline toilet furniture unit from Crosswater. Paired with a back to wall or wall hung toilet, this unit cleverly hides a support frame and concealed cistern so you don't have to dig into your walls for the look you want. With an uncut fascia, you can choose your favourite toilet and place the flush plate to where suits you. And available in a wide range of finishes, you can pair with your favourite Crosswater vanity unit to create a cohesive look you'll love. Features:Supplied fully assembled with an uncut fascia so you can install your choice of back to wall or wall-hung WCAdjustable feet are included which is perfect if you have uneven floors and also helps to stop condensation by allowing air to flow underneath the unitEasily removable top for easy access to the concealed cisternDimensions: W545 x D225 x H920mmAvailable in 15 finishes: Pure White Gloss, White Gloss, Matt White, Cashmere Matt, Storm Grey, Castilla Oak, Windsor Oak, American Walnut, Steelwood, Grey Ash Veneer, Onyx Black, Matt Black, Deep Indigo Blue, Sage Green and Soft Clay10 year manufacturer's guarantee

Key Features:Stylish countertop basin and vanity unit1100 x 500 x 400mm vanity unit600 x 380mm countertop basinSleek wall hung designCrisp white countertop basin & wood vanity unit25 year warrantyWhat's Included:1x Vitusso Garda Wood Wall Hung Vanity Unit - 1100mm1x Lorient White Countertop BasinPlease note: a tap and waste are not included but can be purchased separately  Exquisitely designed ceramic basin Your bathroom needs to be functional but that doesn’t mean it can’t be beautifully functional. With our Vitusso vanity units, you won’t need to worry about form or function because these gorgeous vitreous china basins are the perfect blend of both. With its large round shape, it’s purpose-made for the vanity unit and a match made in heaven.Real wood look and feelThese bathroom vanity units feature a wood finish that’s at the very forefront of material technology, offering a truly luxurious embossed texture and a real sense of quality. Underneath the waterproof melamine veneer is hugely durable particleboard which makes it ideal for wall hanging thanks to its low weight. Silent soft close drawersWhat’s that you hear? Nothing you say? That is absolutely right! The soft close drawers on the Vitusso units are so smooth and quiet you’d hardly know you’d opened or closed them. High-quality metal runners ensure a seamless movement meaning that the days of clunky, jamming drawers have gone!Conveniently store your everyday essentialsAlongside the large drawer, these gorgeous Vitusso vanity units feature a set of shelves for storing anything from spare towels to spare toothpaste tubes. They’re made from the same high-quality materials as the rest of the unit so the overall look of both drawer and shelves is utterly impeccable.Manufactured in Italy, the home of styleVersace, Prada, Armani. All great designers from different parts of Italy. It's truly the home of all things stylish and where some of the most beautiful things have been created, including our Vitusso bathroom furniture.100% Pre-assembled and ready to fitNo more nightmare flat-pack furniture because this Vitusso unit comes fully assembled and ready to go. So don't worry about needing the right tools or whether those screws are spares or integral to the build.A warranty to inspire confidenceWith Vitusso furniture you're buying the best bathroom furniture available so it's only right that we guarantee it for a more than suitable amount of time. From the day of purchase, you're covered for 25 years on the unit, with moving parts being covered for 2 years.Choose your perfect Vitusso handleWhen you add one of our Vitusso Garda vanity units into your basket, you'll have the option of two beautiful Vitusso handles to purchase. Long, sleek, and elegant; that's what makes these Vitusso handles stand out. These handles are the perfect replacement to the standard handles provided with your vanity unit and come in a stylish Black, Space Grey, and Brushed Brass finish.Choose your perfect Vitusso bath panelIt's important to match your Vitusso furniture with the right bathroom necessities, and that's where these stunning Vitusso bath panels come in. Offering side and end panels in beautiful oak and concrete finishes, these sleek bath panels are the perfect match for the stunning Vitusso Garda collection.Discover the range of Vitusso bath panels. Material: structure in chipboard, with the surface in melamine for wood or concrete finishes with embossed grain or texture. Internal parts of the structure are in melamine chipboard in anthracite fabric finish. ABS edges make the furniture free of corners, and gluing is made with anti-humidity polyurethane glue. Wall plugs, screws and basin waste are not included

Vintage teak wall unit from the sixties in the style of Poul Cadovius. This is considered the most famous mid century style wall unit with a great combination of brass holders and teak shelves. This wall system offers great storage space with one large cabinet, one medium cabinet, two 10” shelves, and four 8” shelves. Condition: Wear Consistent with age and use (see photos) Dimensions: Layout as pictured 78” high x 63” wide *** We are located in Edmonton Alberta and offer a 20% discount for curbside pickup in Edmonton. *** Please check out our other “finomenal” items as we love to combine shipping. *** Don’t forget to favorite our shop https://www.etsy.com/ca/shop/FinomFinds *** We are obsessed with researching and identify items correctly. Keep in mind that our pieces are vintage and will sometimes have minor wear and character. Examine the photographs closely for all details; feel free to email us with questions or comments.

Danish mid century modern teak 3-bay wall unit made in the 1960s made by PS system, Randers, designed by Preben Sorensen. It is a fully modular shelving system with interchangeable parts that can be arranged upon one’s need. Two cabinets and nine shelves provide just enough space for storage and exposing a lot of books and decorations. The whole set is veneerd in beautiful rich grain teak and hangs on solid wood rails using brass hangers. Especially noteworthy are the brass details of the cabinet. One of the lower shelves on either side can be easily removed (temporarily or for good, depending on the needs) creating a desk space thus making it home officer space either in bedroom or a living room. This set includes: - one cabinet with sliding doors: H: 35 / W 80 / D: 45 cm - one glass cabinet H: 35 / W 80 / D: 35 cm - one display shelf 31 cm deep - 5 shelves 20 cm deep - 4 shelves 45 cm deep - 4 upright supports; 200 cm long - brass hardware The wall unit has been checked by our team. We have made sure that doors work properly, and all parts fit together. The wall unit has been entirely renovated the wood has been stripped and refinished with several layers of Danish oil, and the brass parts have been cleaned, old bent brass screws were replaced with new ones. We leave minor signs of use that do not spoil the aesthetic and only confirm it is originality. We try to bring furniture back to its best look, still considering it is 60 years old. Clients from all around the world already have trusted our work and its fruits. If you are new to vintage furniture, you can contact us for any possible explanations and close-ups of the piece. Great vintage condition with minimal wear and polished brass hardware. Renewed with additional coats of Danish Oil.

The Primrose Vanity Unit is a sleek and contemporary design that brings a strong look to a bathroom. It is both a style statement and practical. It's 4 drawers and long shelf provides ample storage. Made from solid Tulip Wood and Oak (where oak top is specified) - sustainably sourced, FSC certified. As standard, all pieces come with a 20mm countertop overhang on all sides with the exception of the rear, which means the unit will be flush to the wall. This unit can be configured with a range of sizes, colours, tops and accessories by selecting options below.

Surprise! I really wanted to paint a room with chalkboard paint in our home. I mean, it’s practically a tradition because I’ve painted at least one chalkboard wall in every home I’ve ever been allowed to paint in (exhibit a, exhibit b). In our current home my husband was like, “eh- let’s stick with the…

Wall wardrorob09: The Ultimate Space-Saving Storage Solution Wall wardrobes are a popular choice for

Today we are discussing some ideas to create a mid-century modern or just modern powder room, right for homes with these styles popped up.

Learn how to design, build, and install functional bookshelves, built-ins, and floating shelves to maximize storage and display space on large blank walls. Get tips on materials, lighting, and decorative finishes for custom shelving units.

This clever EKET cabinet is always ready to lend a hand, whether it’s for storing, organizing or emptying your pockets. Go for a color that pops out or keep it discreet.

Wainscoting Paneling Kit -Easy-to-Install- 3 Upper Rectangles and 3 Bottom Frames in our Pre-Cut, Factory-Primed Wall Molding Package we still haven't made our best designs. Because for this I need your inspirations and ideas. You dream it, I'll design it. What you need to do is very simple, just a few steps. 1) Take a picture of the area you will apply from the opposite side. 2) Report the width and height information. 3) Send your special requests and we will send our work, if you like it, create an order. I'm sure you will like it :) Wall lath packages are ready to install and very easy to apply. Mounting the wall laths to the wall is not a difficult task at all, you will follow the assembly instructions in the package. We post the assembly instruction to help you understand how to follow the steps to get the final look. How to attach the wall lath to the wall, 1- Arrange the pieces on the floor and create the shape on the worksheet. 2- Mark the wall where the laths will be attached according to the plan showing the layout. 3- Proceed by gluing the parts one by one. 4- Attach the slats to the wall and use a spirit level or square to align the slats. 5 - You can use nails or glue to stick it on the wall. Contact for more information.