CLUSTER CLUSTER 71 Dieter Moebius (16 January 1944 – 20 July 2015) Konrad "Conny" Plank (3 May 1940 – 5 December 1987) MUSICIANS Hans-Joachim Roedelius – organ, electronically treated cello, audio-generator, amplifier Dieter Moebius – organ, Hawaiian guitar, audio-generator, amplifier, helias Conrad Plank – electronics, effects, producer TRACK TITLES "7:42" - 7:42 "15:43" - 15:43 "21:32" - 21:32 BUREAU B RECORDS BB 058 High Quality Vinyl Reissue NEW & SEALED
Produktbild","width":463,"height":1199}},{"node":{"relativeUrl":"/im/productimages/1/8/5/7/1/8/9/0/8/2/4/9/4/6/0/7/6/2/9/184f2dc3-97ce-41e8-be68-d4d4d3650e55_cropped.jpg","description":"Produktbild","width":304,"height":578}},{"node":{"relativeUrl":"/im/productimages/7/5/2/1/2/6/6/0/1/5/8/6/9/0/4/5/5/5/5/e2d8d035-ded8-448e-9cbb-06d65d2e62db_cropped.jpg","description":"Produktbild","width":1276,"height":726}},{"node":{"relativeUrl":"/im/productimages/1/7/4/7/3/4/2/4/3/7/9/4/3/9/6/7/7/5/7/3af62c6a-f0e7-401b-a5cc-778f5fdc20fb_cropped.png","description":"Produktbild","width":243,"height":620}},{"node":{"relativeUrl":"/im/productimages/6/1/6/2/1/1/8/1/2/6/2/2/4/1/5/2/1/4/7/608eaa24-ec2d-4801-b9a5-a3fa294e0d80_cropped.png","description":"Produktbild","width":698,"height":1063}},{"node":{"relativeUrl":"/im/productimages/8/1/3/9/1/1/0/9/7/4/9/8/1/1/4/3/7/2/5/ac642585-f7a3-4498-ba2a-6fc8cc063233_cropped.png","description":"Produktbild","width":459,"height":1197}},{"node":{"relativeUrl":"/im/productimages/4/7/8/6/5/3/7/5/7/5/1/7/8/4/4/9/8/1/5/9f9d5d77-bcf5-4610-abae-d9a5b6145afa_cropped.png","description":"Produktbild","width":698,"height":1187}},{"node":{"relativeUrl":"/im/productimages/2/7/8/8/4/4/6/8/5/3/2/8/0/6/4/4/9/1/8/817b94b5-4aca-440c-a19d-2d1ba6673237_cropped.png","description":"Produktbild","width":1116,"height":1276}}],"totalCount":8},"videos":{"edges":[],"totalCount":0},"databaseId":24157168,"name":"HyVibe CHV30E","brand":{"name":"Lâg Guitars","showNameInProductName":true,"id":"QnJhbmQKaTgwMTI5","relativeUrl":"/de/brand/lag-guitars-80129
Gitarrenverstärker, Yamaha, »THR5H Gitarrenverstärker«Viele Verstärker sind nur kleinere Versionen von Bühnenverstärkern. Dieses Modell von Yamaha ist direkt auf die Bedürfnisse von Gitarristen, die zuhause oder Backstage spielen wollen ausgelegt.Dieser Verstärker ist spezialisiert auf elektroakustische Gitarren und bietet jede Menge zuschaltbare Effekte. Man kann sein Spiel mit raumfüllenden Reverb und Delay Effekten ergänzen. Auch die Lautstärke ist nicht entscheidend. Wenn man einmal leise spielen muss, bietet der Verstärker trotzdem noch einen klaren, unvergleichlichen Ton. Dank des USB-Anschlusses kann man seine gespielten Songs direkt auf den PC übertragen. Durch den eingebauten Chromatik-Tuner ist die Gitarre auch direkt über den Verstärker stimmbar. Der Verstärker kann auch mit an Orte genommen werden, bei denen keine Stromquelle in der Nähe ist. Er bietet die Möglichkeit durch den Einsatz von acht Mignon-Batterien genutzt zu werden. Die Laufzeit beträgt dabei maximal ca. 7 Stunden. Details: E-Gitarren Combo5 Amp Simulationen (Clean, Crunch, Lead, Brit HI, Modern)Effekte: Chorus, Flanger, Phaser, Tremolo, Delay, Delay/Reverb, Spring Reverb, Hall, ReverbTone ReglerMit Chromatik TunerAUX-AnschlussPhones-AnschlussKlinke-EingangUSB-AnschlussMit AC-AdapterInklusive USB KabelInklusive Stereo-Mini KabelInkl. Download-Service für Software
Plug this slide into an amplifier—the moment that it hits your strings, your guitar will come alive. If you have an electro acoustic and you want it to sound more like a resonator guitar through your amp, then this is the slide for you. If you want to isolate the lead work on your slide or add effects, this is the slide for you. Copy and paste these key words into the YouTube search bar to view a demo video for this amplified slide: “JSA Cu62, Cu64 & Cu66 Copper Hybrid Amplified Guitar Slides” The Cu66 Copper Hybrid, Amplified Guitar Slide is meant to be an additional signal to be mixed with the sound of your amplified guitar, which means that one cord comes from the output of your guitar and a second cord comes from the output of the slide. This could be configured in a number of ways: Two amps - one for the guitar, one for the slide. One amp - with the guitar and slide plugged into a Y-splitter and the splitter plugged into the amp. The slide would need a clean boost or distortion/overdrive to adjust/mix the signal. A clean boost, distortion/overdrive, reverb or any other effect could be applied to the slide signal for accent in all cases and a panning pedal could be added to easily control the relative volume of the slide and guitar, if available. Similar to other amplified instruments, this slide will require some equalizer adjustment to obtain the proper tone for your specific musical needs. IMPORTANT: The output of the guitar must be plugged into an amplifier in order to hear the open notes on the guitar. The slide only picks up the sound when it is in contact with the strings; once it is pulled away from the strings the open strings will not play through the slide, therefore the output of the guitar must be used to amplify the open strings. The construction of this slide is similar to the Cu63 and Cu65 slide models, but this model is strictly for use on a lap steel or a standard guitar laying flat in the player’s lap, as it comes with a 1/4” TS jack in one end and is sealed on the other. This 82.5mm (3.25” Length) guitar slide features a copper shell over polymer sleeve. The copper shell offers a look and sound comparable to brass, while the polymer sleeve adds mass and dampens harsh overtones. The Cu66 Amplified Guitar Slide has a generous mix of comfort, sustain, and maneuverability; and the copper finish will form a rich patina as it is polished by steel strings and then tarnished over time. Your slide will ship out shiny and polished, but over time the finish will darken and develop an appearance somewhere between pictures one through four and picture five. The copper shell is meant to tarnish and will remain in a consistent state of change throughout its lifetime. As you play, small markings will develop along the surface of the slide, which will in turn tarnish and add depth to the emerging patina. You will find that the more you play, the more dramatically the slide’s surface will be affected—the appearance of its finish will be directly related to your own playing style and therefore unique to you. Dimensions: Length - 3.25” (82.5mm) Outside Diameter - 1.18” (30mm) Weight - 3.8 oz. Each slide is handcrafted in Fenton, Missouri.
Wireless Modelling Verstärker für E-Gitarre/Bass: 10 WattBluetooth-Amp mit Transmitter/Funksender 2x 2 ZollLautsprecher 2 Modi(Gitarre/Bass) 7 Kanäle Regler fürGain, Volume, Tone, DLY/RVB Effekte: Delay,Reverb mit Tap Tempo 9 Drumpatterns,Metronom Tap Tempo fürGeschwindigkeitsanpassung MightyAMPMobile App mit weiteren Features EingebauterEmpfänger und Nux Wireless Sender Auto-matching-System,Mute-Funktion, Auto-Off-Funktion Der Nux Mighty Airist ein kabelloser Stereo-Modeling Verstärker mit 10 Watt und 22-Zoll Lautsprechern. Die Bluetooth -Konnektivität sowie diedazugehörige App bieten zahlreiche Anwendungsmöglichkeiten - sei es zuHause, unterwegs oder zum Aufwärmen vor einer Show. Durch die beiden Lautsprecher mit einem passiven Bassradiator kann der Mighty Airperfekt mit E-Gitarre als auch mit Bass verwendet werden. Der kabelloseNux-Sender ist im Lieferumfang enthalten. So kann über dasintegrierte Sender- und Empfängersystem mit Gitarre, Basssowie aktiven und passiven Tonabnehmern gearbeitet werden - ideal für unterwegs ohne lästige Kabel mitzunehmen. Über die MightyAmp-Mobile-App kann der Verstärker über das Smartphone gesteuert werden. Die Appverfügt über zahlreiche Effekte und Verstärker-Modelle. Dieeingestellten Parameter können einfach gespeichert und wieder aufgerufenwerden. Der Mighty Airwird mit einem integrierten wiederaufladbaren Akku betrieben,der bis zu 18 Stunden Spielzeit ermöglicht. TechnischeDetails: 24-bit /44.1KHz, 20Hz-20kHz, Latenz <5msec AkkulaufzeitAmp bis ca. 18 Stunden, Ladezeit ca. 3 Stunden AkkulaufzeitTransmitter ca. 3,5 Stunden, Ladezeit ca. 2,5 Stunden, Aufladungerfolgt über INPUT am Amp oder Micro-USB-Kabel (nicht enthalten) Anschlüsse Amp:Guitar In (6,35mm), Phones (3,5mm), Aux in (3,5mm) AnstecksenderB-5RC TX mit 6,3mm Klinke, Reichweite bis 15 Meter AnmeldefreieNutzung auf 2,4GHz Maße (BxHxL):ca. 18,6 x 10 x 9 cm Gewicht: ca.780g Lieferumfang; Nux Mighty AirGitarren-Verstärker Funksender USB-C-Kabel.
Nux Trident Multi-Effektgerät für Gitarre Digitales modeling Effektgerät LCD-Bildschirm 96 Presets 27 Verstärker-Simulationen 4 Mikrofon-Simulationen Looper-Funktion Bis zu 10 Effekte gleichzeitig Effekte: Delay; Pitch-Shift; Phaser; Chorus; Compressor; Filter; Reverb; Tremolo 2x 6.3mm Klinke Output 2x XLR Output Aux In 3.5mm Kopfhöreranschluss Groundlift Schalter FX-Loop / 3.5mm TRS-MIDI In/Out USB-C Anschluss zur Nutzung am PC Inklusive Netzteil Maße: 312 x 164 x 65mm Gewicht: 1.65kg Das Nux Trident Multi-Effektgerät ist ein kompakter Modeler mit zahlreichen eingebauten Effekten, einem Looper , 27 Verstärker Modellen und 4 Mikrofon-Simulationen . Das Effektgerät kann als Standalone-Gerät genutzt oder an einen Gitarrenverstärker angeschlossen werden. Über die 10 Fußschalter können Effekt-Patches geschaltet und gewechselt werden, sowie Effekte ein- und ausgeschaltet werden. Die Regler Gain, Level, Bass, Middle, Treble und Presence geben direkten Zugriff auf den Grundsound, wobei Effekte wie Delay, Reverb und Modulationseffekte wie Chorus, Tremolo und Phaser, sowie auch Kompressor oder Pitch-Effekt über die zugehörigen Regler ebenso einfach direkt angepasst werden können. Durch die 27 integrierten Verstärker-Simulationen die mit 4 Mikrofon-Simulationen gepaart werden können, entstehen endlose Soundmöglichkeiten , wobei sich hier für jede Musikrichtung das richtige Werkzeug findet. Über den USB-C Anschluss kann der Trident an einen Computer als Interface angeschlossen werden, womit sich noch detailliertere Einstellungen treffen lassen. Es ist ebenso möglich IR-Responses (Boxen-Simulationen) anderer Hersteller auf as Gerät zu laden. Es stehen 2 Klinken-Ausgänge zur Verfügung, sowie zwei XLR DI-Ausgänge - dadurch kann das Trident auch direkt an eine PA angeschlossen werden. Neben Kopfhörer-Anschluss und AUX-Eingang stehen auch 3.5mm TRS-MIDI IN und OUT bereit. Als Besonderheit verfügt das kompakte und extrem robuste Effektgerät mit Send und Return Anschlüssen über einen FX-Loop zum Anschluss von externen Effektgeräten. Im Lieferumfang ist ein passendes Netzteil enthalten sowie ein USB-Kabel und zwei MIDI-Adapter von 5-pol Midi zu TRS-MIDI. Lieferumfang: Nux Trident Netzteil USB-C zu USB-A Kabel 2x Adapter TRS-MIDI zu 5-Pol MIDI Buchse.
Produktbild","width":3496,"height":1198}},{"node":{"relativeUrl":"/im/Files/5/4/4/3/9/6/5/SP_articular_mod2.jpg","description":"Produktbild","width":2260,"height":990}},{"node":{"relativeUrl":"/im/Files/5/4/4/3/9/6/3/fenderstudio-amp-projunior.jpg","description":"Produktbild","width":2461,"height":2113}},{"node":{"relativeUrl":"/im/Files/5/4/4/3/9/6/4/SP_mod2.jpg","description":"Produktbild","width":3768,"height":912}},{"node":{"relativeUrl":"/im/Files/5/4/4/3/9/6/2/iStock_000013836989Medium_opt.jpg","description":"Produktbild","width":2494,"height":1486}},{"node":{"relativeUrl":"/im/productimages/8/9/5/0/1/7/5/5/9/9/0/8/8/8/5/6/2/9/1/f178761d-e172-41d5-a3f9-7593ac45c791_cropped.jpg","description":"Produktbild","width":2917,"height":1620}}],"totalCount":6},"videos":{"edges":[{"node":{"videoId":"-zIPbZM0bmI","name":"StealthPlug CS and StealthPedal CS: Go Out and Play!","provider":"YOUTUBE"}}],"totalCount":1},"databaseId":5676031,"name":"StealthPlug CS","brand":{"name":"IK Multimedia","showNameInProductName":true,"id":"QnJhbmQKaTE1MTcx","relativeUrl":"/de/brand/ik-multimedia-15171
Mit der Katana MkII-Serie hebt BOSS die renommierte Katana-Plattform auf die nächste Stufe und erweitert die Bühnenverstärker um Sounds, Effekte und Funktionen. Durch die Soundvariationen für alle fünf Verstärker-Charaktere verdoppelt sich die Anzahl verfügbarer Klangoptionen. Weiterhin wurden auch die integrierten Effektkategorien von drei auf fünf erweitert und bieten nun noch mehr wählbare Echtzeit-Klangbearbeitung. Mit dem Endstufeneingang für Modelling-Verstärker und Multieffektgeräte, der einfachen Stereo-Erweiterung für Setups aus zwei Verstärkern, der überarbeiteten Editor-Software sowie zahlreichen weiteren Verbesserungen bietet die MkII-Serie zudem eine erhöhte Benutzerfreundlichkeit.
Plug this slide into an amplifier—the moment that it hits your strings, your guitar will come alive. If you have an electro acoustic and you want it to sound more like a resonator guitar through your amp, then this is the slide for you. If you want to isolate the lead work on your slide or add effects, this is the slide for you. Copy and paste these keywords into the YouTube search bar to view a demo video for this amplified slide: “JSA Cu62, Cu64 & Cu66 Copper Hybrid / Cu76, Cu78 & Cu79 Copper Aluminum Amplified Guitar Slides” The “SmoothRaw Resonator” Amplified Guitar Slide is meant to be an additional signal to be mixed with the sound of your amplified guitar, which means that one cord comes from the output of your guitar and a second cord comes from the output of the slide. This could be configured in a number of ways: Two amps - one for the guitar, one for the slide. One amp - with the guitar and slide plugged into a Y-splitter and the splitter plugged into the amp. The slide would need a clean boost or distortion/overdrive to adjust/mix the signal. A clean boost, distortion/overdrive, reverb or any other effect could be applied to the slide signal for accent in all cases and a panning pedal could be added to easily control the relative volume of the slide and guitar, if available. Similar to other amplified instruments, this slide will require some equalizer adjustment to obtain the proper tone for your specific musical needs. IMPORTANT: The output of the guitar must be plugged into an amplifier in order to hear the open notes on the guitar. The slide only picks up the sound when it is in contact with the strings; once it is pulled away from the strings the open strings will not play through the slide, therefore the output of the guitar must be used to amplify the open strings. The construction of this slide is similar to the “SmoothRaw” aluminum, copper and brass slide models, but these models are strictly for use on a lap steel or a standard guitar laying flat in the player’s lap, as it comes with a 1/4” TS jack on one end and is sealed on the other. The “SmoothRaw Resonator” Amplified Guitar Slides have a generous mix of comfort, sustain, and maneuverability; and the copper finish will form a rich patina as it is polished by steel strings and then tarnished over time. Your aluminum slide will be ultra light weight and super fast. Your copper and brass slides will ship out shiny and polished, but over time the finish will darken and develop a deep, rich patina. The surface will likely begin to tarnish faster than normal, because I have removed the original factory finish. The aluminum, copper and brass slides can be purchased individually or in a set of three in the “SmoothRaw” Trifecta box set. The Trifecta trio set comes with an aluminum, copper and brass slide, each in its own cotton bag and packaged in a limited edition black tin box. This box is road worthy, fits these three slides perfectly and is small enough to stowaway inside your guitar case or bag. Dimensions: Aluminum: Length - 2.36” (60mm) Outside Diameter: 0.875” (22.2mm) Weight - 0.9oz. Copper: Length - 2.36” (60mm) Outside Diameter: 0.875” (22.2mm) Weight - 2.3 oz. Brass: Length - 2.36” (60mm) Outside Diameter: 0.875” (22.2mm) Weight - 2.3 oz. Limited Edition Black Tin Box: Length: 3.7" (93mm) Width: 3.3" (83mm) Height: 1" (25mm) Weight: 1.5oz. (box only), 6.5oz. (box and slides) Each slide is handcrafted in Fenton, Missouri.
NUX Mighty 8BT MKII Gitarren-Verstärker: Tragbarer Bluetooth-Verstärker 8 Watt Leistung 6,5 Zoll Lautsprecher TSAC-HD (White-Box) Amp Modeling Algorithmus 512 Samples IR-Auflösung 7 anpassbare Presets Effekte: Modulation, Delay, Reverb, Drum Machine Tap Tempo für Geschwindigkeitsanpassung Regler für Gain, Tone, Level 2 Eingänge für Mikrofon und Instrument Vielseitig einsetzbar Betrieb mit einem 12V-Netzteil oder acht AA-Batterien MightyAmp-App und Mighty Editor-Bearbeitungssoftware Inkl. Tragegurt und Netzteil Der NUX Mighty 8BT MKII ist ein vielseitiger und tragbarer Modeling-Verstärker , der speziell für Gitarristen entwickelt wurde, die eine Vielzahl von Klangmöglichkeiten und Effekten in einem kompakten Format suchen. Dank der flexiblen Amp-Modeling- und IR-Funktionen eigent sich der Verstärker für E-Gitarre, Bassgitarre sowie akustische Gitarre und ist dadruch vielseitig einsetzbar, ob für Bühnenauftritte, Proben oder Straßenmusik. Der Verstärker hat eine Leistung von 8 Wat t und ist mit einem 6,5-Zoll-Lautsprecher ausgestattet, der eine unverfälschte Wiedergabe der Verstärker- und Effektmodelle ermöglicht. Der Mighty 8BT MKII nutzt den TSAC-HD (White-Box) Amp Modeling Algorithmus, um ein realistisches Spielgefühl zu bieten. Er verfügt über eine 512 Samples IR-Auflösung mit 36 eingebauten hochwertigen IRs (Impulsantworten) und 18 User-Slots für Drittanbieter-IRs. Eine Vielzahl von Effekten sind enthalten, darunter Modulation, Delay und Reverb. Es gibt sieben anpassbare Presets , die über die MightyAmp App oder die Mighty Editor Software bearbeitet und gespeichert werden können. Die MightyAmp App und die Mighty Editor Software ermöglichen eine einfache Bearbeitung und Verwaltung der Presets sowohl auf mobilen Geräten als auch auf dem PC. Zusätzlich zu dem Gitarreneingang verfügt der Verstärker über einen Mikrofoneingang für dynamische Mikrofone mit separatem Vocal-Reverb-Send, was ihn ideal für Live-Auftritte und Gesangsverstärkung macht. Der eingebaute Drumcomputer bietet eine Vielzahl von Rhythmen und verfügt über eigene Tap-Tempo-Kontrollen. Der Mighty 8BT MKII unterstützt USB-C-Audiostreaming und kann als USB-Aufnahmeschnittstelle genutzt werden (NUX ASIO-Treiber notwendig). Er unterstützt verschiedene Routing-Optionen wie Normal, Dry Out, Re-amp und Loopback. Zum lautlosen Üben steht ein Kopfhöreranschluss zur Verfügung, der Lautsprecher wird dann automatisch stummgeschaltet. Der Verstärker hat einen 6,35 mm TRS-Klinkenausgang , um das Verstärkersignal und Mikrofonsignal an eine PA-Anlage oder einen Mischpult zu senden. Durch den Betrieb mit einem 12V-Netzteil oder acht AA-Batterien (für bis zu 8 Stunden Spielzeit) ist der Verstärker ideal für unterwegs . Der NUX Mighty 8BT MKII ist somit ein idealer Verstärker für Gitarristen, die Flexibilität, Mobilität und eine Vielzahl von Klangoptionen in einem kompakten Gerät suchen Anschlüsse + Technische Details: Instrumenteneingang 6,35 mm Mikrofoneingang 6,35 mm USB-C Anschluss Aux In 3,5 mm Kopfhöreranschluss 6,35 mm Line Out 6,35 mm Bluetooth Batteriebetrieb über 8x AA (nicht enthalten) Stromversorgung über DC 12V Netzteil Maße (BxHxL): 24 x 16,6 x 22 cm Gewicht: 2,96 kg + keepdrum Klinkenkabel Lieferumfang: Nux Mighty 8BT MK2 Verstärker Tragegurt 12 V Netzteil keepdrum Klinkenkabel.
Wireless Modelling Verstärker für E-Gitarre/Bass: 10 WattBluetooth-Amp mit Transmitter/Funksender 2x 2 ZollLautsprecher 2 Modi(Gitarre/Bass) 7 Kanäle Regler fürGain, Volume, Tone, DLY/RVB Effekte: Delay,Reverb mit Tap Tempo 9 Drumpatterns,Metronom Tap Tempo fürGeschwindigkeitsanpassung MightyAMPMobile App mit weiteren Features EingebauterEmpfänger und Nux Wireless Sender Auto-matching-System,Mute-Funktion, Auto-Off-Funktion Der Nux Mighty Airist ein kabelloser Stereo-Modeling Verstärker mit 10 Watt und 22-Zoll Lautsprechern. Die Bluetooth -Konnektivität sowie diedazugehörige App bieten zahlreiche Anwendungsmöglichkeiten - sei es zuHause, unterwegs oder zum Aufwärmen vor einer Show. Durch die beiden Lautsprecher mit einem passiven Bassradiator kann der Mighty Airperfekt mit E-Gitarre als auch mit Bass verwendet werden. Der kabelloseNux-Sender ist im Lieferumfang enthalten. So kann über dasintegrierte Sender- und Empfängersystem mit Gitarre, Basssowie aktiven und passiven Tonabnehmern gearbeitet werden - ideal für unterwegs ohne lästige Kabel mitzunehmen. Über die MightyAmp-Mobile-App kann der Verstärker über das Smartphone gesteuert werden. Die Appverfügt über zahlreiche Effekte und Verstärker-Modelle. Dieeingestellten Parameter können einfach gespeichert und wieder aufgerufenwerden. Der Mighty Airwird mit einem integrierten wiederaufladbaren Akku betrieben,der bis zu 18 Stunden Spielzeit ermöglicht. TechnischeDetails: 24-bit /44.1KHz, 20Hz-20kHz, Latenz <5msec AkkulaufzeitAmp bis ca. 18 Stunden, Ladezeit ca. 3 Stunden AkkulaufzeitTransmitter ca. 3,5 Stunden, Ladezeit ca. 2,5 Stunden, Aufladungerfolgt über INPUT am Amp oder Micro-USB-Kabel (nicht enthalten) Anschlüsse Amp:Guitar In (6,35mm), Phones (3,5mm), Aux in (3,5mm) AnstecksenderB-5RC TX mit 6,3mm Klinke, Reichweite bis 15 Meter AnmeldefreieNutzung auf 2,4GHz Maße (BxHxL):ca. 18,6 x 10 x 9 cm Gewicht: ca.780g Lieferumfang; Nux Mighty AirGitarren-Verstärker Funksender USB-C-Kabel.
Der ENGL A101 ist ein recht kräftiger Verstärker für Akustikgitarren und mehr - vier Kanäle und diverse Effekte treffen auf 150 Watt.
Plug this slide into an amplifier—the moment that it hits your strings, your guitar will come alive. If you have an electro acoustic and you want it to sound more like a resonator guitar through your amp, then this is the slide for you. If you want to isolate the lead work on your slide or add effects, this is the slide for you. Copy and paste these key words into the YouTube search bar to view a demo video for this amplified slide: “JSA Cu62, Cu64 & Cu66 Copper Hybrid Amplified Guitar Slides” The Cu64 Copper Hybrid, Amplified Guitar Slide is meant to be an additional signal to be mixed with the sound of your amplified guitar, which means that one cord comes from the output of your guitar and a second cord comes from the output of the slide. This could be configured in a number of ways: Two amps - one for the guitar, one for the slide. One amp - with the guitar and slide plugged into a Y-splitter and the splitter plugged into the amp. The slide would need a clean boost or distortion/overdrive to adjust/mix the signal. A clean boost, distortion/overdrive, reverb or any other effect could be applied to the slide signal for accent in all cases and a panning pedal could be added to easily control the relative volume of the slide and guitar, if available. Similar to other amplified instruments, this slide will require some equalizer adjustment to obtain the proper tone for your specific musical needs. IMPORTANT: The output of the guitar must be plugged into an amplifier in order to hear the open notes on the guitar. The slide only picks up the sound when it is in contact with the strings; once it is pulled away from the strings the open strings will not play through the slide, therefore the output of the guitar must be used to amplify the open strings. The construction of this slide is similar to the Cu63 and Cu65 slide models, but this model is strictly for use on a lap steel or a standard guitar laying flat in the player's lap, as it comes with a 1/4" TS jack in one end and is sealed on the other. This 73mm (2.875" Length) guitar slide features a copper shell over polymer sleeve. The copper shell offers a look and sound comparable to brass, while the polymer sleeve adds mass and dampens harsh overtones. The Cu64 Amplified Guitar Slide has a generous mix of comfort, sustain, and maneuverability; and the copper finish will form a rich patina as it is polished by steel strings and then tarnished over time. Your slide will ship out shiny and polished, but over time the finish will darken and develop an appearance somewhere between pictures one through four and picture five. The copper shell is meant to tarnish and will remain in a consistent state of change throughout its lifetime. As you play, small markings will develop along the surface of the slide, which will in turn tarnish and add depth to the emerging patina. You will find that the more you play, the more dramatically the slide's surface will be affected—the appearance of its finish will be directly related to your own playing style and therefore unique to you. Dimensions: Length - 2.875” (73mm) Outside Diameter - 1.18” (30mm) Weight - 3.3 oz. Each slide is handcrafted in Fenton, Missouri.
Produktbild","width":3702,"height":2670}},{"node":{"relativeUrl":"/im/productimages/7/5/4/7/6/5/8/5/4/9/3/2/0/8/7/4/7/2/6/392896cb-4a1a-4fe3-85f4-5b0f7f821c26_cropped.jpg","description":"Produktbild","width":3837,"height":3866}},{"node":{"relativeUrl":"/im/productimages/1/6/8/0/3/6/4/1/6/8/4/5/8/3/5/5/9/5/539b15a8-190e-4694-b33b-eec72902fe3f_cropped.jpg","description":"Produktbild","width":3735,"height":1931}},{"node":{"relativeUrl":"/im/productimages/5/1/0/1/6/4/0/9/0/9/8/0/4/2/5/7/9/4/40fcbec8-955c-4b9e-bebb-6c456ab22b8b.jpg","description":"Produktbild","width":4000,"height":3000}},{"node":{"relativeUrl":"/im/productimages/6/6/8/1/9/8/8/8/3/7/2/7/6/2/2/9/8/3/4/3a79e068-56f9-46c4-8eeb-22c2b0f23167.jpg","description":"Produktbild","width":4000,"height":3000}},{"node":{"relativeUrl":"/im/productimages/3/3/3/2/3/5/0/8/6/2/0/0/6/5/6/8/2/5/4/15891c76-f675-4051-ba3d-bc328fc92f16.jpg","description":"Produktbild","width":1200,"height":1200}},{"node":{"relativeUrl":"/im/productimages/7/4/1/1/1/4/0/0/1/5/5/1/6/9/1/4/0/4/1/fff7bed7-f495-470b-bc03-02e7abd7c41e_cropped.jpg","description":"Produktbild","width":498,"height":2349}},{"node":{"relativeUrl":"/im/productimages/2/1/7/7/8/7/0/8/4/7/1/6/0/0/7/4/4/1/9/25ad987b-f6cf-424d-8394-645e7afc091a_cropped.jpg","description":"Produktbild","width":1890,"height":1884}},{"node":{"relativeUrl":"/im/productimages/2/1/0/2/7/3/0/9/4/9/3/3/8/9/8/6/2/0/0/9cb5e501-6807-4998-9d83-36e6e54f7686_cropped.jpg","description":"Produktbild","width":1890,"height":1884}},{"node":{"relativeUrl":"/im/productimages/3/5/1/7/5/3/7/1/5/2/1/0/3/2/9/5/6/7/2/eac82a5e-0526-4e64-a53f-29c0af254b8f_cropped.jpg","description":"Produktbild","width":1888,"height":1884}},{"node":{"relativeUrl":"/im/productimages/9/0/7/7/3/0/8/6/0/9/9/5/2/2/9/2/5/0/9/7ef3083f-2cef-4efb-8e9e-fe4a60c74d30_cropped.jpg","description":"Produktbild","width":1888,"height":1884}},{"node":{"relativeUrl":"/im/productimages/2/0/7/1/5/3/6/7/1/8/1/8/2/7/5/9/6/0/5265609e-e49c-4522-8e88-15c7c9f9c576_cropped.jpg","description":"Produktbild","width":1888,"height":1884}}],"totalCount":12},"videos":{"edges":[],"totalCount":0},"databaseId":6347225,"name":"PMX-150","brand":{"name":"Lenco","showNameInProductName":true,"id":"QnJhbmQKaTExMTQ=","relativeUrl":"/de/brand/lenco-1114
Smart-Nylonsaiten-Hybrid-Gitarre mit Tonabnehmer, smart nylon string acoustic-electric guitar, HyVibe LÂG TNHV15ACE - HyVibe Smart Guitar incl. Deluxe Bag - Hybrid Nylon String Series: Tramontane HyVibe 15 (mit Bag) mit Hylon Saiten, Hals-Korpus-Übergang am 14.Bund. Obersattel-Halsbreite 46 mm (Klassikgitarre 52 mm, Westerngitarre 43 mm, E-Gitarre 42 mm) Die weltweit erste Smart Guitar, die sich selbst verstärkt, mit integrierten Effekte ausgestattet ist, via Bluetooth vom Smartphone Musik/Backing-Tracks als Lautsprecher abspielt und einen integrierten Looper der simultan neben den Effekten einsetzbar ist, besitzt. Die Elektronik ist via Smartphone-App steuerbar. Der Looper kann via Bluetooth-Pedal (nicht im Lieferumfang) gesteuert werden. Alles ohne Kabel, Effektpedale oder Verstärker. Body - Body Style: Auditorium Cutaway - Top: Solid Red Cedar (Zeder massiv) - Back & Side Wood: Khaya Mahogany Neck - Neck: Khaya Mahogany - Fingerboard: Blackwood - Frets: 20 / Silver Nickel - Scale: 65 cm - Machine Heads: Satin Black - Nut: Black Graphite / 46 mm - Neck-Body-Transition: 14. Fret Electronic - Electronic: HyVibe System - Multi-effects: Reverb, Chorus, Delay, Octaver, Tremolo, Phaser, Distortion... - Looper - Bluetooth Speaker - stream directly from your smartphone through your guitar and play along - Metronome - Download the HyVibe Smartphone App to go with the guitar - Incl. LAG Deluxe Gigbag - Dimension: 1120 x 485 x 190 mm.
Gitarreneffektprozessor mit neuen Farben für Ihren Sound
Wireless Modelling Verstärker für E-Gitarre/Bass: 10 WattBluetooth-Amp mit Transmitter/Funksender 2x 2 ZollLautsprecher 2 Modi(Gitarre/Bass) 7 Kanäle Regler fürGain, Volume, Tone, DLY/RVB Effekte: Delay,Reverb mit Tap Tempo 9 Drumpatterns,Metronom Tap Tempo fürGeschwindigkeitsanpassung MightyAMPMobile App mit weiteren Features EingebauterEmpfänger und Nux Wireless Sender Auto-matching-System,Mute-Funktion, Auto-Off-Funktion Der Nux Mighty Airist ein kabelloser Stereo-Modeling Verstärker mit 10 Watt und 22-Zoll Lautsprechern. Die Bluetooth -Konnektivität sowie diedazugehörige App bieten zahlreiche Anwendungsmöglichkeiten - sei es zuHause, unterwegs oder zum Aufwärmen vor einer Show. Durch die beiden Lautsprecher mit einem passiven Bassradiator kann der Mighty Airperfekt mit E-Gitarre als auch mit Bass verwendet werden. Der kabelloseNux-Sender ist im Lieferumfang enthalten. So kann über dasintegrierte Sender- und Empfängersystem mit Gitarre, Basssowie aktiven und passiven Tonabnehmern gearbeitet werden - ideal für unterwegs ohne lästige Kabel mitzunehmen. Über die MightyAmp-Mobile-App kann der Verstärker über das Smartphone gesteuert werden. Die Appverfügt über zahlreiche Effekte und Verstärker-Modelle. Dieeingestellten Parameter können einfach gespeichert und wieder aufgerufenwerden. Der Mighty Airwird mit einem integrierten wiederaufladbaren Akku betrieben,der bis zu 18 Stunden Spielzeit ermöglicht. TechnischeDetails: 24-bit /44.1KHz, 20Hz-20kHz, Latenz <5msec AkkulaufzeitAmp bis ca. 18 Stunden, Ladezeit ca. 3 Stunden AkkulaufzeitTransmitter ca. 3,5 Stunden, Ladezeit ca. 2,5 Stunden, Aufladungerfolgt über INPUT am Amp oder Micro-USB-Kabel (nicht enthalten) Anschlüsse Amp:Guitar In (6,35mm), Phones (3,5mm), Aux in (3,5mm) AnstecksenderB-5RC TX mit 6,3mm Klinke, Reichweite bis 15 Meter AnmeldefreieNutzung auf 2,4GHz Maße (BxHxL):ca. 18,6 x 10 x 9 cm Gewicht: ca.780g Lieferumfang; Nux Mighty AirGitarren-Verstärker Funksender USB-C-Kabel.
NUX MG-400 Multi-Effektgerät mit Klinkenkabel Speakersimulation mit 25 Verstärker-Modellen 25 Cabinet Simulationen / 4 Mikrofon-Simulationen Zahlreiche Effekte Expressionpedal IR-Loader LCD-Display Bis zu 10 Effekt simultan nutzbar Integrierter Looper USB Audio-Interface Funktion Inklusive Netzteil Maße: 289 x 160 x 71mm Gewicht: 920g Das Nux MG-400 ist ein Modeling-Multi-Effektgerät für Gitarre und Bass das durch seine 2 leistungsstarken DSP-Chips hervorragende Sound liefert. Hierbei können bis zu 10 Effekte simultan genutzt werden. An Bord sind 25 Cabinet Simulationen mit 4 Mikrofon-Simulationen. Dabei sind alle klassischen Amp-Models vertreten womit Soundmäßig vom Clean-Sound bis zum High Gain Sound alles bedient wird. Das MG-400 ist an das beliebte MG-300 angelehnt, das bereits aufgrund seiner Soundvielfalt und seines Spielgefühls viele Anhänger fand. Das LCD Display gibt Auskunft über alle nötigen Informationen und Parameter - trotz den vielen Einstellungsmöglichkeiten bleibt die Bedienung intuitiv und übersichtlich. Die 25 mitgelieferten Impulse Responses (Boxen-Simulationen) können durch den IR-Loader mit eigenen IRs ergänzt werden. Die mitgelieferten IRs für Gitarrenboxen kombinieren 4 klassische Mikrofone mit 3 Mikrofonpositionen, um Anfängern einen schnellen und einfachen Einstieg in die Welt der Multieffekte zu ermöglichen. Außerdem sind 8 Bassboxen-IRs und 3 Akustikgitarren-IRs enthalten. Neben dem Klinkeneingang für Gitarre steht ein 3.5mm AUX -In zur Verfügung sowie zwei Line Outputs zum Anschluss an eine PA und ein Kopfhörer-Anschluss. Über den USB-Anschluss kann das MG-400 als Audio-Interface an einem Computer genutzt werden. + keepdrum Mono Klinkenkabel 6.3mm Instrumentenkabel Lieferumfang: Nux MG-400 Netzteil keepdrum Klinkenkabel.
Produktbild","width":465,"height":822}},{"node":{"relativeUrl":"/im/productimages/3/1/3/9/4/9/2/8/2/0/8/9/1/1/7/6/9/3/8ab2b427-fef6-45e5-946e-8e0f889238c3.jpg","description":"Produktbild","width":990,"height":1041}}],"totalCount":2},"videos":{"edges":[],"totalCount":0},"databaseId":41224765,"name":"LS-2 Line Selector","brand":{"name":"BOSS","showNameInProductName":true,"id":"QnJhbmQKaTExODg1MA==","relativeUrl":"/de/brand/boss-118850
Perfekter Einstieg für alle Gitarristen und Bassisten die mit ihrem Computer Musik machen möchten. Einfach anschliessen und losrocken, egal ob Bühne oder Studio. Die mitgelieferte AmpliTube Software sorgt für den amtlichen Sound und lässt sich im IK Custom Shop um zusätzliche Verstärker und Effekte zum „Traum-Rig“ erweitern. Zusammenfassung: USB-Audio Interface Kabel für Gitarre und Bass | 16bit A/D D/A Wandler | 44/48 kHz | MAC OS X und Windows | Gitarren/Bass-Eingang | Hochwertiger Hi-ZGitarren/Bass-Eingang | Kabellänge inkl. Interface 2,5 m | Stromversorgung über USB | Kopfhörerausgang: 3,5 mm Klinke | Lautstärkeregler | Inklusive IK Custom Shop Software (Standalone und Plugin Betrieb) | Enthält 50 Gear Credits für den Kauf neuer Modelle im Online Custom Shop | Low Latency ASIO und Core Audio Treiber
Wireless Modelling Verstärker für E-Gitarre/Bass: 10 WattBluetooth-Amp mit Transmitter/Funksender 2x 2 ZollLautsprecher 2 Modi(Gitarre/Bass) 7 Kanäle Regler fürGain, Volume, Tone, DLY/RVB Effekte: Delay,Reverb mit Tap Tempo 9 Drumpatterns,Metronom Tap Tempo fürGeschwindigkeitsanpassung MightyAMPMobile App mit weiteren Features EingebauterEmpfänger und Nux Wireless Sender Auto-matching-System,Mute-Funktion, Auto-Off-Funktion Der Nux Mighty Airist ein kabelloser Stereo-Modeling Verstärker mit 10 Watt und 22-Zoll Lautsprechern. Die Bluetooth -Konnektivität sowie diedazugehörige App bieten zahlreiche Anwendungsmöglichkeiten - sei es zuHause, unterwegs oder zum Aufwärmen vor einer Show. Durch die beiden Lautsprecher mit einem passiven Bassradiator kann der Mighty Airperfekt mit E-Gitarre als auch mit Bass verwendet werden. Der kabelloseNux-Sender ist im Lieferumfang enthalten. So kann über dasintegrierte Sender- und Empfängersystem mit Gitarre, Basssowie aktiven und passiven Tonabnehmern gearbeitet werden - ideal für unterwegs ohne lästige Kabel mitzunehmen. Über die MightyAmp-Mobile-App kann der Verstärker über das Smartphone gesteuert werden. Die Appverfügt über zahlreiche Effekte und Verstärker-Modelle. Dieeingestellten Parameter können einfach gespeichert und wieder aufgerufenwerden. Der Mighty Airwird mit einem integrierten wiederaufladbaren Akku betrieben,der bis zu 18 Stunden Spielzeit ermöglicht. TechnischeDetails: 24-bit /44.1KHz, 20Hz-20kHz, Latenz <5msec AkkulaufzeitAmp bis ca. 18 Stunden, Ladezeit ca. 3 Stunden AkkulaufzeitTransmitter ca. 3,5 Stunden, Ladezeit ca. 2,5 Stunden, Aufladungerfolgt über INPUT am Amp oder Micro-USB-Kabel (nicht enthalten) Anschlüsse Amp:Guitar In (6,35mm), Phones (3,5mm), Aux in (3,5mm) AnstecksenderB-5RC TX mit 6,3mm Klinke, Reichweite bis 15 Meter AnmeldefreieNutzung auf 2,4GHz Maße (BxHxL):ca. 18,6 x 10 x 9 cm Gewicht: ca.780g Lieferumfang; Nux Mighty AirGitarren-Verstärker Funksender USB-C-Kabel.
MOEN NLP1 - 1Loop - Guitar Single Loop Pedal - Routing Effects Description MOEN NLP1 1Loop - Passive Single Send and Return Signal Loop Guitar Pedal This compact, good looking and simple to use passive "send and return loop pedal" is a multi functional pedal for single signal chain routing in your guitar set up. With Input, Output, Send and Return options, the MOEN NLP-1 can be used to send the same signal to different amps, multiple pedals and to receive signal back from another instrument and pedals. Send and Return Loop Creating the effects or signal loop is done by using the send and return. The guitar is plugged into the input and the signal can be sent to the pedal chain by using the send output. Connect up the pedals in the order you desire, and the return from the output of the last pedal in the chain into the return on the 1Loop pedal. When engaged, the entire loop gets sent to your amplifier from the output on the pedal. True Bypass The Moen 1Loop features a True Bypass, which means that your guitar signal proceeds unimpeded and uncolored when the loop is not activated. To engage the loop, simply click on the silver switch, and to disengage it, press it again. Main Features: True Bypass Ultra small footprint - will fit on any pedal board Connectors: 1/4" jack input, outputs, send, return Power Supply: DC 9V / 2mA (not included) Weight: 140g Dimensions: 9 x 4.5 x 5.2 cm (incl switch) Note: Power supply not included. Please use a 9V DC power adapter whose polarity is negative center otherwise, the product may not work properly. Package List: 1 * Effect Pedal 1 * User Manual(English) 1 * Year warranty through our store No Duty to Canada and USA FAST 'N FREE FAST 'N FREE USA Shipping (typically about 4 days via USPS ) Ships from Canada *Just to be clear on DUTY, (regardless of what Etsy warns buyers of ) Canada and the USA have a trade agreement in place that allows US citizens to purchase/import up to $800 dollars per purchase in to the United States from Canada with NO Duty at all, State taxes are another story, some states charge a TAX some do not, BUT NO duty.
Multieffektpedal für E-Gitarre55 Effekte (12 Verstärker, 9 Lautsprecherboxen, 34 Effektpedale)200 Speicherplätze (100 Werkssounds, 100 modifizierbare User-Speicherplätze)Klangbibliothek mit 40 VoreinstellungenEffektbibliothek mit 40 VoreinstellungenChromatisches Stimmgerät45 Schlagzeug-BegleitsoundsMetallfußschalterBis zu 5 Sekunden Delay-TimeStereo-KlinkenbuchsenausgangStereo-Miniklinkeneingang für KopfhörerStereo-Aux-EingangVerstärker/Mischpult-OptimierungswahlschalterSoundqualität: 24 Bit, 44,1 kHzMaße: 15,9 cm x 20,2 cm x 5,8 cm (L x B x H)Gewicht: 645 ginklusive Netzteil Features: Hersteller: DigiTechBauform: BodeneffektAmp Modeling: JaDrum-Computer: JaStimmgerät: JaKopfhöreranschluss: 3,5mmRecording-Ausgang: NeinAux-Eingang: JaUSB Anschluss: NeinMidi Schnittstelle: NeinExpressionpedal: NeinBatteriebetrieb: Neininkl. Netzteil: Ja
Produktbild","width":468,"height":1200}},{"node":{"relativeUrl":"/im/productimages/2/3/2/7/0/1/0/5/3/7/0/4/5/4/7/2/2/7/3/b80a0510-def3-4e15-843d-3a37bb98ef30_cropped.png","description":"Produktbild","width":452,"height":1175}},{"node":{"relativeUrl":"/im/productimages/4/1/9/4/6/6/4/8/5/1/6/0/7/3/7/5/8/1/441c0f0e-d76c-4478-9dc3-236ea7c3cec0_cropped.png","description":"Produktbild","width":688,"height":1186}}],"totalCount":3},"videos":{"edges":[],"totalCount":0},"databaseId":24157133,"name":"HyVibe","brand":{"name":"Lâg Guitars","showNameInProductName":true,"id":"QnJhbmQKaTgwMTI5","relativeUrl":"/de/brand/lag-guitars-80129
Battery-Powered Monitor/Amplifier for Electric Guitar Mounts to guitar with suction cup Approx. 3.5 hours playing time with charged battery Optimised EQ and effects for a harder metal sound 1 Channel Power: 6 W Equipment: 40 mm neodymium magnet speaker Construction: ABS plastic housing Effects: Distortion, Phaser and Reverb Dimensions (W x H): 70 x 40 mm Incl. USB-A to USB micro charging cable and 6.3 to 3.5 mm mono jack cable Note: not suitable for guitars with nitro varnish 30 30 dagen Money-back garantie 3 Drie jaar Thomann garantie Leverbaar sinds Februari 2023 artikelnummer 559782 verkoopseenheid 1 stuk Power 6 W Speaker size 1x 1,5" Channels 1 Reverb Yes Effects Processor Yes External FX Loop No Line input No Headphone connection No Battery Operation in hours 4 h
Plug this slide into an amplifier—the moment that it hits your strings, your guitar will come alive. If you have an electro acoustic and you want it to sound more like a resonator guitar through your amp, then this is the slide for you. If you want to isolate the lead work on your slide or add effects, this is the slide for you. Copy and paste these key words into the YouTube search bar to view a demo video for an amplified slide similar to this one: JSA Cu62, Cu64 & Cu66 Copper Hybrid / Cu76, Cu78 & Cu79 Copper Aluminum Amplified Guitar Slides The Zn79, “Super Heavyweight” Amplified Guitar Slide is meant to be an additional signal to be mixed with the sound of your amplified guitar, which means that one cord comes from the output of your guitar and a second cord comes from the output of the slide. This could be configured in a number of ways: Two amps - one for the guitar, one for the slide. One amp - with the guitar and slide plugged into a Y-splitter and the splitter plugged into the amp. The slide would need a clean boost or distortion/overdrive to adjust/mix the signal. A clean boost, distortion/overdrive, reverb or any other effect could be applied to the slide signal for accent in all cases and a panning pedal could be added to easily control the relative volume of the slide and guitar, if available. Similar to other amplified instruments, this slide will require some equalizer adjustment to obtain the proper tone for your specific musical needs. IMPORTANT: The output of the guitar must be plugged into an amplifier in order to hear the open notes on the guitar. The slide only picks up the sound when it is in contact with the strings; once it is pulled away from the strings the open strings will not play through the slide, therefore the output of the guitar must be used to amplify the open strings. The construction of this slide is similar to the “Super Heavyweight” Zn71 and Zn72 heavy wall, brass slide models, but this model is strictly for use on a lap steel or a standard guitar laying flat in the player’s lap, as it comes with a 1/4” TS jack in one end and is sealed on the other. Your slide will ship out shiny and polished, but over time the finish will darken and develop a deep, rich patina. As you play, small markings will develop along the surface of the slide, which will in turn tarnish and add depth to the emerging patina. You will find that the more you play, the more dramatically the slide’s surface will be affected—the appearance of its finish will be directly related to your own playing style and therefore unique to you. Dimensions: Length: 2.36” (60mm) Outside Diameter: 1.18” (30mm) Weight: 6.3oz. Each slide is handcrafted in Fenton, Missouri.
BOSS präsentiert den Katana-Air EX Gitarrenverstärker, einen leistungsstarken, kabellosen Desktop-Verstärker für Gitarre und Bass. Der kompakte Katana-Air EX kombiniert einen professionellen Stereoklang und erstklassige Katana-Sounds. Dank moderner BOSS Funk-Technologie und integriertem Bluetooth, lässt sich der Verstärker kabellos spielen. Zudem ermöglicht die begleitende BOSS Tone Studio App (iOS/Android) den Zugriff auf umfangreiche Klangbearbeitungsfunktionen und diverse Tools zur Entwicklung der eigenen Spielfähigkeiten mittels YouTube-Inhalten. HIGHLIGHTS: - Leistungsstarker Desktop-Gitarrenverstärker mit moderner BOSS Funk-Technologie - Kraftvoller, lebendiger Stereo-Sound mit zwei 5''-Lautsprechern, Holzgehäuse mit Bassreflex-Port und 35 Watt max. Leistung - Fünf vielseitige Verstärkercharakter aus der renommierten Katana Bühnenverstärker-Serie, inklusive neutralem Verstärkercharakter für elektroakustische Gitarren und Bässe - Über 60 hochwertige BOSS Effekte - Erstklassige BOSS Funk-Technologie für eine zuverlässige Audioübertragung mit extrem niedriger Latenz - Kompakter Funksender mit bis zu 12 Stunden Laufzeit und integriertem Lade-Port am Verstärker - Sechs interne Speicherplätze für individuelle Verstärker- und Effektsetups - BOSS Tone Studio App (iOS/Android) mit detaillierter Klangbearbeitung und leistungsfähigen Übungsfunktionen - Lade und teile Livesets via BOSS Tone Exchange - Integriertes USB Audio Interface für die Musikproduktion am Computer
Legendärer Stereo Sound, Moderne Innovation
The Paradise is a crystal clear boost, giving sparkling highs, clear and focused lows, and enough gain to get your amp cranked up to the high heavens. It’s fantastic for layering with other drive pedals for an added bit of gain and clarity, or for being your new “always on” baseline tone to make your amp and guitar sing. You can check out a demo of the Paradise Boost here: https://youtu.be/0Jnq0n4_YKQ Like all of our pedals, the Paradise is handmade in the USA, features a lifetime warranty, true bypass switching, and is built with high quality components.