Learn how to make a simple fun fold tuck in card using the gorgeous Rustic Harvest designer series paper and the Yeti To Party stamp set.
A handmade card created with the Yeti to Party Stamp Set by Stampin' Up! Shop for products in the UK, Ireland & other European Countries.
For the month of November I am going to be going live on Wednesday mornings for a FREE with purchase Christmas Card Class. You can see the replay of this week’s class below. When you place an…
You can make this Hello Yeti To Party Christmas Card for yourself with the measurements and supply list included here.
I am just having too much fun with the Yeti to Party Bundle. The dies for this stamp set, are only available in September while supplies last. I have made several of these clear envelope shaker cards, and they are not so hard! You can check them out here, here, and here. My card base is 4.25" x 11", scored @ 5.5". The fold is at the bottom and your opening is the top. Your clear envelope flap will be folded over the top, AFTER you insert a window sheet (4.25" x 5.5", and your sequins). Use clear tape to...
Today I have a couple of fun cards with the Yeti to Party Bundle but I also want to highlight the Perfect Partners promotion that is happening ONLY in the month of September. Some of our favorite stamp sets have temporarily been paired with coordinating dies. You can save 10% on the bundles or purchase the items separately. The dies will no longer be available after September. Don't miss the Perfect Partners!!! Here are each of the bundles from Perfect Partners: Yeti to Party Bundle https://www.stampinup.com/products/yeti-to-party-bundle-english?hostcode=URFSZNGR Trimming the Tree Bundle https://www.stampinup.com/products/trimming-the-tree-bundle-english?hostcode=URFSZNGR This Birthday Piggy Bundle https://www.stampinup.com/products/this-birthday-piggy-bundle-english?hostcode=URFSZNGR Waterfall Canyon Bundle https://www.stampinup.com/products/waterfall-canyon-bundle-english?hostcode=URFSZNGR Apple Harvest Bundle https://www.stampinup.com/products/apple-harvest-bundle-english?hostcode=URFSZNGR Fresh Cut Flowers Bundle Link https://www.stampinup.com/products/fresh-cut-flowers-bundle-english?hostcode=URFSZNGR IMPORTANT TIPS FOR THIS FLICKING TECHNIQUE I recommend three shades, a light, medium and dark alcohol marker in the same color family (in this case Brown/Black for the Bigfoot/ Grays for the Yeti) Start with the lightest shade, build with medium and finish with darkest shade "Flick" small strokes in the same direction with each color When flicking with the lightest color you can make the longer strokes When flicking with the medium tone build in the color with slightly smaller strokes When flicking in the darkest tone keep this shorter and in the place where we'd have shadow Start with one section at a time, for example, start with Yeti's head, then arms, then body, etc. each time Stroke upward - do not recommend - stroking downward (this gives a consistent, natural look) (Optional) Rotate your image to stay consistent as you build your flicking strokes and colors Hold your marker close to the tip and try to stay vertical for this flicking technique (when you hold marker angled to the side it could create thicker strokes and you could lose that detail stroke appearance of hairs) Practice makes perfect! The great thing about alcohol markers is that ability to blend and if you go too dark in one spot you can go over it with a lighter color and lighten it back down. STAMPIN' BLENDS FOR BIGFOOT Basic Black Light (Darkest Hair) Soft Suede Dark (Medium Hair) Soft Suede Light (Light Hair) Ivory (Face) Polished Pink Light (Tongue) INSTRUCTIONS FOR THE BIGFOOT CARD Die Cut Aspen Die Tree Scene out of Sahara Sand Cardstock. Cut two footprints with the snowcap die in the lower right corner. I cut two footprints. Sponge a little Crumb Cake ink on the trees within the oval shape. Cut the tree pattern out of the Boughs of Holly DSP. Cut Basic White Card Base. Glue DSP to card base. Take a black marker and darken lower right corner where footsteps will be. Glue the tree panel to the DSP. Color Bigfoot using Blends and flicking technique listed above. Pop up on dimensionals and place by footprints. Stamp "I Believe in You" from Beauty of Friendship stamp set in Evening Evergreen ink in upper left corner. STAMPIN' BLENDS FOR YETI Smoky Slate Gray (Darkest) Smoky Slate Light (Medium) Gray Granite Light (Light) Pool Party Light and Dark (Face, Horns) Tahitian Tide Light (Tongue) INSTRUCTIONS FOR THE YETI CARD Cut tree scene on Silver Foil. Take Pearlized Enamel Effects in White and pipe onto tree branches in the "nook" areas where snow would lay. Set aside to dry. Color Yeti in the Stampin' Blends combo listed above using Flicking Technique. Stamp snowflakes in Pacific Point ink. Stamp sentiment in Pacific Point ink. Die Cut Yeti, Scarf in Pacific Point Cardstock, Sentiment piece and snowflakes. Glue scarf to Yeti. Put Yeti on dimensionals and add to card. Put snowflakes on Mini Dimensionals and add to card. A note about your sentiment piece. I chose to create a banner with one card and a stitched rectangle die cut with the other. It depends on the sentiment you choose for the size of your sentiment piece but any small die in a square or rectangle shape would work. Or just create a banner with your Banners Pick-a-Punch tool or Paper Snips scissors. CARD MEASUREMENTS Card Base: 4-1/4 x 11 Score: 5-1/2" (Pool Party for Yeti Card, Basic White for Bigfoot Card) DSP Layer: 4 x 5-1/4" (Only for Bigfoot Card) Aspen Die Cut Layer: 4 x 5-1/4" (Silver Foil for Yeti Card, Sahara Sand Cardstock for Bigfoot Card) Remember the Perfect Partners promotion ends 9/30/22. I have listed all of the bundles in the product list below. Thank you and have a great day! Happy crafting!
You can make this Hello Yeti To Party Christmas Card for yourself with the measurements and supply list included here.
If you think of Abominable Snowmen as scary creatures, I want to introduce you to one that is adorable and
Learn how to make a simple fun fold tuck in card using the gorgeous Rustic Harvest designer series paper and the Yeti To Party stamp set.
A handmade card created with the Yeti to Party Stamp Set by Stampin' Up! Shop for products in the UK, Ireland & other European Countries.
Friends, today's stamp set was one that, when I first saw it in the Holiday Mini Catalogue, I knew I **had** to buy! The Yeti to Party set is so whimsical and cute, I couldn't resist it. The set is great for year-round use, as well as for the holidays, with sentiments for winter and birthdays, and props to add that include ice cream, presents, a mug, and much more! Best of all, the stamp set is on sale right now for just $10! I'll include a clickable photo supply list at the end of this post that will take you right to the individual items in my online store. Featuring a Real Red & Garden Green colour scheme, my card is an easy one to put together. First, I started by cutting the label from Basic White Cardstock, using Waves Dies. Then I stamped the sentiment in Garden Green ink. Next, I stamped the Yeti and mug onto Basic White Cardstock in Tuxedo Black Memento Ink. To colour the mug, yeti's horns and mouth, I used Stampin' Blends: Granny Apple Green (dark), Real Red (dark), and Bronze. Then I cut out the Yeti and mug, adhering the mug with a Mini Glue Dot. By the way, the Yeti Dies are on big discount right now, too, just $15.60! To assemble the card, I adhered a 3 1/2" x 4 3/4" panel of Santa Express DSP to a 3 3/4" x 5" Garden Green panel, then added those to a 4" x 5 1/4" Basic White panel. I fed the ribbon from the Real Red & Garden Green 3/8" Ribbon Combo Pack through my label, then added Stampin' Dimensionals to the back of the label and adhered it to the DSP panel. I secured the ribbon to the back of the white panel with Mini Glue Dots, then tied a bow and attached it to the label with glue dots as well. From there, I adhered the remaining pieces with dimensionals: the yeti to the panels, and the panels to a 5 1/2" x 8 1/2" Real Red card base. I added Red Rhinestone Basic Jewels to embellish. Inside the card, I attached a 4" x 5 1/4" Basic White panel, decorating it with a scrap of DSP. On my Facebook Live today - you can watch it here - my viewers and I decided to change the card up a bit. We went with Garden Green ribbon instead of red, and we used the other side of the DSP. It's amazing to see how different the card looked! Need some supplies? Place an order with me in December and you'll receive a FREE international tutorial bundle featuring the Framed Florets Bundle! (Ce produit est également disponible en français.) Plus I'll send you my handmade card of the month. And don't miss the Free Shipping Day coming up this Thursday 15 December! Orders of $100 or more before tax receive FREE shipping! Join my newsletter for the details! And please follow my blog: Thank you for stopping by, friends, and have a wonderfully crafty day! Product List Yeti To Party Photopolymer Stamp Set (English) [159826] Yeti Dies [160253] Waves Dies [158840] Santa Express 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper [159582] Real Red & Garden Green 3/8" (1 Cm) Ribbon Combo Pack [159577] Red Rhinestone Basic Jewels [146924] Garden Green Classic Stampin' Pad [147089] Tuxedo Black Memento Ink Pad [132708] Clear Block E [118484] Bronze & Ivory Stampin' Blends Combo Pack [154922] Granny Apple Green Stampin' Blends Combo Pack [154885] Real Red Stampin' Blends Combo Pack [154899] Real Red 8-1/2" X 11" Cardstock [102482] Garden Green 8-1/2" X 11" Cardstock [102584] Basic White 8 1/2" X 11" Cardstock [159276] Mini Stampin' Cut & Emboss Machine [150673] Add All to Cart
Hi Stampers! Here we are in week 2 of my Stamp Happy Holidays series. Today’s card is a Center Step Card. Just a couple of cuts, and a bit of scoring creates an impressive greeting card perfect for the Holidays, or any occasion! For images on the cards I used the ALL BUNDLED UP and the YETI TO PARTY stamp sets from the STAMPIN’ UP!®️ JULY - DECEMBER 2022 MINI CATALOG. Both stamp sets contain fun whimsical images perfect for creating cards with lots of Holiday cheer! Of course the Center Step Card works well with any stamp set you care to use. Let’s look at the cards! ALL BUNDLED UP YETI TO PARTY YETI DIES YES!!! YETI DIES!!! Stampin’ Up! is releasing six sets of dies that coordinate with stamp sets found in the current Annual Catalog and the current Mini Catalog. The stamp sets and dies can be purchased as a bundle for a savings of 10%. Of course the dies can be purchased separately as well. The PERFECT PARTNERS promotion is a limited release, and die sets will only be available 1-30 September 2022, or while supplies last. Page down to the end of this post for more information on the PERFECT PARTNERS limited time offer. Let’s take a look at the Yeti die cut images! YETI DIE CUT IMAGES CENTER STEP CARD VIDEO CENTER STEP CARD CUTTING & SCORING DIAGRAM * Cut card base 8 1/2” x 5 1/2”. * Along 5 1/2” side place cardstock at 1” mark and cut from 1 1/2” to 5 1/4”. Remove cardstock from trimmer, flip it over and repeat the process. * Along the 8 1/2” side of the cardstock at 1 1/2” score from the outside of the cardstock to the cut line. Repeat at 2 1/2” mark, and repeat at the 5 1/4” mark. Flip the cardstock and repeat on other side. * At the 4 1/4” mark score between the cut lines. * Fold - the score lines at 2 1/2” are valley folds; all other folds are mountain folds. * Now your card base is ready for you to create a terrific card. ALL BUNDLED UP - MOOSE SUPPLIES * Stamp Sets - All Bundled Up, Knit Together, and greeting of choice * Basic White (thick) center step card base * Basic White cardstock 4”x 3 1/4” for stamping background * Basic White cardstock to stamp moose image and greeting * Inks - Sweet Sorbet, Stampin’ Blends - Sweet Sorbet (light & dark), So Saffron (light), Flirty Flamingo (light), Soft Suede (light & dark), Crumb Cake (light & dark), Ivory; Wink of Stella * Stylish Shapes dies - must fit sentiment * Scissors to fussy cut moose * Adhesive and dimensionals ALL BUNDLED UP - RACCOON SUPPLIES * Stamp sets - All Bundled Up, Trees For Sale * Basic White center step card base * Garden Green cardstock to cover card base - 4 pieces: 3 1/2” x 2 3/4”, 5 1/2” x 1 1/2”and two at 2 3/4” x 1” * Gingham Cottage DSP - Garden Green, layer on Garden Green cardstock, 4 pieces: 3 3/8” x 2 5/8”, 5 3/8” x 1 3/8”, and two pieces at 2 5/8” x 7/8” * Scraps of Basic White cardstock for stamping raccoon, trees, small * For greeting - I used a greeting from the Trees for Sale stamp set. The greeting is stamped on a piece of. Basic White cardstock cut at 2 3/8”x 1/2” matted on a 2 1/2” x 5/8” piece of Garden Green cardstock *Inks - Garden Green, Stampin’ Blends - Shaded Spruce (light & dark), Crumb Cake (light & dark), Basic Black (light & dark) * Pearls Basic Jewels - 6 colored with Shaded Spruce (dark) Stampin’ Blend * Adhesive and dimensionals NOTES - * I used Garden Green ink for the trees. Ink the stamp, stamp off then stamp the tree on the cardstock. Ink up the detail stamp and stamp on the tree. This creates a two tone look adding depth and dimension to the trees. * I used the Tree Lot Dies to die cut the trees and the tree trunks. The tree trunks are die cut from Crumb Cake cardstock. These dies are no longer available. The trees are not difficult to fussy cut, and the tree trunks are 1/4” wide x 1/2” long. CHRISTMAS YETI TO PARTY SUPPLIES * Stamp set - Yeti to Party * Basic White center step cardstock * Inks - Memento Basic Black, Pool Party; Stampin’ Blend - Pool Party (light), Flirty Flamingo (light), Natural Tones Light (#900); Stampin’ Write Markers - Real Red and Garden Green; Wink of Stella * Fine Sparkle Adhesive Backed Gems - 3 Pool Party NOTE - The Stampin’ Blends alcohol I k will bleed through the Basic White cardstock. This issue can be avoided by using a separate piece of Basic White cardstock that measures 4 1/8” x 3 3/8” for the focal image. Simply adhere it to the card front- there will be a 1/8 “ border around the focal panel. The placement of the greeting will need to be adjusted. Watch the video for my “after the fact” fix.🙂 Another solution is the following card. CHRISTMAS YETI TO PARTY - DIE CUTS SUPPLIES * Stamp set - Yeti to Party * Yeti Dies (Available 1-30 September or while supplies last) * Basic White center step card base * Basic White cardstock about 1/4 sheet for stamping and die cutting * Small piece of Poppy Parade cardstock for die cutting * Inks - Memento Tuxedo Black, Pool Party; Stampin’ Blends - Poppy Parade (light & dark), Smoky Slate (light & dark), Parakeet Party (light & dark), Pool Party (light), Flirty Flamingo (light), Natural Tones Light (# 900); Stampin’ Write Markers - Real Red and Garden Green * Fine Sparkle Adhesive Backed Gems - 3 Pool Party * Adhesive and dimensionals CENTER STEP CARDS PERFECT PARTNERS LIMITED TIME OFFER WHAT: STAMPIN’ UP! PERFECT PARTNERS LIMITED RELEASE PROMOTION - six new dies sets that coordinate with stamp sets featured in current catalogs. Dies may be purchased separately or bundled with its coordinating stamp set for a savings of 10% STAMP SETS & LIMITED RELEASE DIES FROM ANNUAL CATALOG * Fresh Cut Flowers - Fresh Cut Stems Dies * This Birthday Piggy - Playful Piggy Dies * Waterfall Canyon - Waterfall Canyon Dies * Trimming the Tree - Tree Trimming Dies FROM MINI CATALOG * Apple Harvest - Apple Blossoms Dies * Yeti to Party - Yeti Dies WHEN: 1-30 SEPTEMBER 2022 (Bundles and dies are available while supplies last. Stamp sets will be available for the duration of the catalog in which the stamp set appears.) For more information about this limited time offer, and to view products click the link below. PERFECT PARTNERS LIMITED OFFER That’s all for today. Thank you for checking in. Until next time… Stamp Happy! Kim All stamps and stamped images ©️1990-2022®️
Miss Monday with the Yeti to Party Stamp Set and limited time only Yeti Dies!!! These Yeti Dies are part of the Perfect Partner Promotion for September! These stamp sets are from the Annual Catalog and for one month you can order their perfect partner...matching dies!!! I had already loved this Yeti stamp set and started stamping with him early on. I even used him for a swap and had to fussy cut 22 Yetis! Now with the Yeti Dies I can cut it out PERFECTLY each time plus all the other bonus shapes! *Photo reference for fold. You can Yeti Dies alone or as a Bundle and save 10%! It is hard to see in the photo, but to give your Yeti a real snow look, add a little wink of stella to his fur coat! The Yeti dies cut out the presents too. I used my Stampin' Blends to color them in and LOVE how they turned out! You can make this card too when you shop from my online store and follow the tutorial below. Supplies Yeti to Party Stamp Set Yeti Dies Design A Daydream DSP Paper- Pool Party, Basic White, So Saffron Ink- Memento Black, Pool Party Stampin' Blends- SU800, Light Daffodil Delight, Dark Pool Party, Light Flirty Flamingo, Light Gray Granite In Color Baker's Twine Wink of Stella Dimensionals Paper Trimmer Paper Snips Stampin' Cut & Emboss Machine Measurements Pool Party Cardbase: 5 1/2 x 8 1/2 scored @ 4 1/4 & 2 1/8 Basic White: 3 3/8 x 4 3/8 3 x 4 (die cut yeti and presents) 3/4 x 1 1/2 4 x 5 1/4 (inside) So Saffron: 3 1/2 x 4 1/2 DSP: 4 x 5 1/4 cut in half @ 2 inches Steps Measure, score, and cut your paper. Stamp in Memento Ink onto the 3 x 4 Basic White the Yeti and 5 presents. Die cut them out and color them with your Stampin' Blends. Stamp in Memento Ink onto the 3 3/8 x 4 3/8 Basic White the banner of flags. Color those in with the Stampin' Blends. Stamp in Pool Party just the top phrase of the saying "Get Yeti to Party!" Color the Baker's Twine with the Pool Party Blend and make to bows. Attach bows to the end of the stamped banners with a glue dot. Glue on of the DSP to the Basic White for the inside and glue to the inside of the card. Glue the other DSP to the front of the Cardbase (see photo above as a reference on the fold). Glue the So Saffron to the Basic White and glue the back left to the front of the cardbase over the DSP. Attach the Yeti, sign, and presents with dimensionals. Be sure to use your Wink of Stella to make your Yeti sparkle like clean snow! Happy Stampin' Everyone!!!
I am a Card Maker and love to share my card Designs with others
Stamps are gently used with some staining but so defects that affect the stamped image. Stamp block not included. Dies are used but in "like new" condition. Stamps and dies will only be sold as a bundled set. You'll receive: Yeti To Party Stamps (2022) Yeti Dies (2022)
You can make this #GDP360 Winter Wishes Snow Crystal Card for yourself with the measurements & supply list included here.
Stamp & Ink Designs Group Fun! It’s Lori Perez’s turn today for my designer feature. Lori’s Trade Card Swap even included the card base. All I did this time was […]
Miss Monday with the Yeti to Party Stamp Set and limited time only Yeti Dies!!! These Yeti Dies are part of the Perfect Partner Promotion for September! These stamp sets are from the Annual Catalog and for one month you can order their perfect partner...matching dies!!! I had already loved this Yeti stamp set and started stamping with him early on. I even used him for a swap and had to fussy cut 22 Yetis! Now with the Yeti Dies I can cut it out PERFECTLY each time plus all the other bonus shapes! *Photo reference for fold. You can Yeti Dies alone or as a Bundle and save 10%! It is hard to see in the photo, but to give your Yeti a real snow look, add a little wink of stella to his fur coat! The Yeti dies cut out the presents too. I used my Stampin' Blends to color them in and LOVE how they turned out! You can make this card too when you shop from my online store and follow the tutorial below. Supplies Yeti to Party Stamp Set Yeti Dies Design A Daydream DSP Paper- Pool Party, Basic White, So Saffron Ink- Memento Black, Pool Party Stampin' Blends- SU800, Light Daffodil Delight, Dark Pool Party, Light Flirty Flamingo, Light Gray Granite In Color Baker's Twine Wink of Stella Dimensionals Paper Trimmer Paper Snips Stampin' Cut & Emboss Machine Measurements Pool Party Cardbase: 5 1/2 x 8 1/2 scored @ 4 1/4 & 2 1/8 Basic White: 3 3/8 x 4 3/8 3 x 4 (die cut yeti and presents) 3/4 x 1 1/2 4 x 5 1/4 (inside) So Saffron: 3 1/2 x 4 1/2 DSP: 4 x 5 1/4 cut in half @ 2 inches Steps Measure, score, and cut your paper. Stamp in Memento Ink onto the 3 x 4 Basic White the Yeti and 5 presents. Die cut them out and color them with your Stampin' Blends. Stamp in Memento Ink onto the 3 3/8 x 4 3/8 Basic White the banner of flags. Color those in with the Stampin' Blends. Stamp in Pool Party just the top phrase of the saying "Get Yeti to Party!" Color the Baker's Twine with the Pool Party Blend and make to bows. Attach bows to the end of the stamped banners with a glue dot. Glue on of the DSP to the Basic White for the inside and glue to the inside of the card. Glue the other DSP to the front of the Cardbase (see photo above as a reference on the fold). Glue the So Saffron to the Basic White and glue the back left to the front of the cardbase over the DSP. Attach the Yeti, sign, and presents with dimensionals. Be sure to use your Wink of Stella to make your Yeti sparkle like clean snow! Happy Stampin' Everyone!!!
Miss Monday with the Yeti to Party Stamp Set and limited time only Yeti Dies!!! These Yeti Dies are part of the Perfect Partner Promotion for September! These stamp sets are from the Annual Catalog and for one month you can order their perfect partner...matching dies!!! I had already loved this Yeti stamp set and started stamping with him early on. I even used him for a swap and had to fussy cut 22 Yetis! Now with the Yeti Dies I can cut it out PERFECTLY each time plus all the other bonus shapes! *Photo reference for fold. You can Yeti Dies alone or as a Bundle and save 10%! It is hard to see in the photo, but to give your Yeti a real snow look, add a little wink of stella to his fur coat! The Yeti dies cut out the presents too. I used my Stampin' Blends to color them in and LOVE how they turned out! You can make this card too when you shop from my online store and follow the tutorial below. Supplies Yeti to Party Stamp Set Yeti Dies Design A Daydream DSP Paper- Pool Party, Basic White, So Saffron Ink- Memento Black, Pool Party Stampin' Blends- SU800, Light Daffodil Delight, Dark Pool Party, Light Flirty Flamingo, Light Gray Granite In Color Baker's Twine Wink of Stella Dimensionals Paper Trimmer Paper Snips Stampin' Cut & Emboss Machine Measurements Pool Party Cardbase: 5 1/2 x 8 1/2 scored @ 4 1/4 & 2 1/8 Basic White: 3 3/8 x 4 3/8 3 x 4 (die cut yeti and presents) 3/4 x 1 1/2 4 x 5 1/4 (inside) So Saffron: 3 1/2 x 4 1/2 DSP: 4 x 5 1/4 cut in half @ 2 inches Steps Measure, score, and cut your paper. Stamp in Memento Ink onto the 3 x 4 Basic White the Yeti and 5 presents. Die cut them out and color them with your Stampin' Blends. Stamp in Memento Ink onto the 3 3/8 x 4 3/8 Basic White the banner of flags. Color those in with the Stampin' Blends. Stamp in Pool Party just the top phrase of the saying "Get Yeti to Party!" Color the Baker's Twine with the Pool Party Blend and make to bows. Attach bows to the end of the stamped banners with a glue dot. Glue on of the DSP to the Basic White for the inside and glue to the inside of the card. Glue the other DSP to the front of the Cardbase (see photo above as a reference on the fold). Glue the So Saffron to the Basic White and glue the back left to the front of the cardbase over the DSP. Attach the Yeti, sign, and presents with dimensionals. Be sure to use your Wink of Stella to make your Yeti sparkle like clean snow! Happy Stampin' Everyone!!!
Hello everyone! I hope you’ve had a great weekend. I’m back with one more Yeti To Party project for you today. In case you missed last week’s Facebook Live, you can find the Yeti to Party Facebook Friday projects here. For this card, I embossed a piece of Basic White with the Brick and Mortar ... Read more
Yeti to Party meets Gingerbread House for three fun creative cards. A Snow Globe completed my trio of cards that all looked so different.
You can make this #GDP360 Winter Wishes Snow Crystal Card for yourself with the measurements & supply list included here.