This is our version of the classic Egg design. It calls for a smooth & flowy style of surfing, yet it's aggressive enough to get "sunnyside up" if you want it to. The Egg is one of the most versatile surfboard designs and can be enjoyed by anyone, at any level of surfing. From beginner to expert, everyone should have this one in their quiver. It comes standard with a 2+1 fin setup, but can be just as enjoyable, and sometimes even better, ridden as a single fin. 7'0 x 21-1/4" x 2-3/4" Darkwood Stringer Glacier Blue Tint Ghost Brushstroke Gloss & Polish Finish 2+1 Futures Fins Set Up Top Glass: 6oz Deck Inlay + 6oz Deck Patch Bottom Glass: 6oz with 6oz Volan Fin Patch Fiberglass Leash Loop Shaper: Micah Wood Please note, all of our surfboards are built in house at our factory in San Diego, California. Model Design is a collaborative effort between Mike Lynch and Micah Wood. Mike has been developing most of the imperfects models for 10+ years and Micah joined the family in 2021 and has been a major influence on refining our Craft. Micah brings 25+ years of experience to Imperfects Surf Craft and between the two gents, there is over 35 years of surf board experience. Mike and Micah build every single board that comes through our factory from start to finish. All surfboard shipping costs will be calculated after purchase. Please email [email protected] in order to receive shipping quotes on all boards. We also offer free pick-up from our retail store in San Diego.
Designed in house by the Captain Fin team, the CF Raked fin comes in four sizes. The 8" and 8.5" will work amazing in your favorite mid length board while the 9.5" or 10" is ideal for your everyday log. This timeless template lends itself to smooth arcing cutbacks and down the line speed.
Peter 'Mo' Moschogianis has been building surfboards since 1965 on Australia's Gold Coast. He surfed right through the ‘shortboard revolution', constantly experimenting with design. This single fin is the finished design he used for his boards. Today it's best suited to a classic single fin surfboard and can be ridden in waves up to six feet.
The sun is kissing the day good morning, and just over those dunes the waves are peeling perfection. You park your Rover, grab your favorite single fin, and surf the morning away. Welcome back to your classic surf truck sunrise daydream, all from the comfort of your home...wherever home may be with "Shore Rover". --> "Shore Rover" photo print of classic Land Rover series three with a single fin surfboard perfectly parked as the sun starts to rise over the Jersey Shore. Details: - Prints are available in these standard sizes: 8"x10", 11"x14", 16"x20", 20"x30". For larger or custom sizes, please message me or visit my official site, TheSunsetShop.com - Your image is printed with a thin white border around the image and digitally signed for that extra touch on beautiful, high quality lustre photo paper so you can pass it on to your next generation. 🙌🏻💕 - Image is digitally signed by the photographer, Kristen M. Brown, on the front of the print. - Each print comes with a beautiful hand written Certificate of Authenticity. Certificates for edition prints are numbered. - Image is printed on high-quality, archival lustre photo paper (Kodak Endura Professional Paper) and ready for you to frame! Standard Archival Value of 100 years in home display and 200 years in dark storage. - Frame is not included. - The colors in this print may appear slightly different from those on your monitor, phone or tablet due to each device has different screen color calibrations. - Please allow up to 7 business days for your print order to be printed and shipped. Returns and exchange details: Your print is custom ordered just for you. As a result, all orders are final as soon as they are placed. I can only accept exchanges if your print is damaged upon arrival. If your order arrives in such a condition, please contact me and let us know immediately. You have 24 hours from the time of delivery to report any damage. It is essential that you contact me within the 24 hours, so that I can claim compensation from the shipping company on your behalf, and reprint the print for you. Please note that Copyright for all artwork is retained by the Artist, Kristen M. Brown, and is not transferred with sale. Artist retains all rights of reproduction. © Samba to the Sea, LLC. Digital files of images are not for sale.
The Maddox is a really generous surfboard on the front foot which is good for paddling and taking a lot of waves. This board is also sharp at the back with a good drive. Perfect for developing your surfing skills and enjoy gliding in small conditions... Type 2+1 or Single Fin Dims - 6'4 x 20 7/8 x 2 5/8 - 6'6 x 21 5/16 x 2 1/2 - 6'8 x 21 5/16 x 2 5/8 - 7'0 x 21 3/8 x 2 11/16 - 7'2 x 21 13/16 x 2 13/16 - Other dims available on custom order Currently in stock (pictures on request) - 6'0 x 20 3/4 x 2 9/16, US BLANKS, 1/4" darkwood stringer. Green painted rails. Used 840€ - 6'4 x 20 7/8 x 2 5/8, US BLANKS, stringer 1/4" darkwood stringer. Clear glass. 820€ - 6'8 x 21 5/16 x 2 5/8, US BLANKS, stringer 1/4" darkwood stringer. Clear glass. USED with fins, leash & boardbag. 550€ - 7'0 x 21 3/8 x 2 11/16, US BLANKS, stringer 1/4" darkwood. Clear glass. Used 835€ - 7'2 x 21 13/16 x 2 13/16, US BLANKS, stringer 1/4" darkwood. Clear glass. 870€ Shipping and Payment Deposit payment for custom orders by Credit Card or Paypal x1 or x4 installments. Current stock can be ordered, please contact us Destination 0 - 30kg 30kg et plus France GEODIS €60.00 GEODIS €80.00 Europe GEODIS €80.00 GEODIS €100.00 Others GEODIS €100.00 GEODIS €130.00 Store pick-up available.
What are the different Surfboard Fins Set Ups? Which ones are right for me and for the conditions I want to Surf in?
The Anti mini-mal that is sort of a mini mal but surfs better than any mini mal. The daisy wagon was born out of the need for a more user friendly looking mid length for those who did not feel comfortable going down the route of the Pancake, Daisy or the wagon. So Jarryd from Ocean Street shapes took the best elements of the wagon and then mashed it together with the original Daisy single fin concept and what came from this experiment was everything But a boring Mini Mal. It went Awesome. The Shovel nose still features a beak allowing the foam to still carry up to the nose, something the daisy single fin originally featured but the wagon being a more performance mid length did not. The Daisy Wagon features a squash Tail still allowing that control and stability, without compromising on down the line speed, tight trim and even tighter pocket surfing. Minimal to low rocker, flat entry in the nose, subtle single through the guts into a spiral Vee in the tail. Mid or semi full rail keeps foam where you need it and shaves it where you don’t. plenty of foam under the chest for paddle power and a flat deck assist with that stability and control. The daisy wagon will have you flying in the smaller stuff or styling top to bottom in the big stuff. It’s a quiver killer Available for order in 6’6 to 8’6 but at its best from 7’2 to 7’11 Best run with the Raido Two plus one set of a 7 or 8 inch flex fin Dimensions 7'6" x 21 3/4" x 2 5/8" **Excludes all shipping costs - please contact us for a shipping quote to your area.
ThickLizzy numero uno, scanned from the magical experiment that Trevor Gordon has ridden into the ground. The experiment that became one of the most notorious quiver-killers on the California coast, shaped in 2015 as a compliment to the v.Bowls, looking for something more suited to flatter faced waves and easy glide - walkable and capable in a super wide variety of conditions, the Thicklizzy very quickly became Lovelace’s most popular shape and has proven itself extremely adaptable for surfers of all types. Set up as either a single fin (Ryan’s pick) or in it’s original three-fin bonzer style that Trevor prefers, these things make trim speed when you thought there couldn’t be any left.*Essential Lizzy notes: Funny story, when Trevor first tried this board in ‘15 it didn’t seem to click - it got shelved for a few weeks until he took it out minus the center fin; it proved SUPER fun with just the side fins as a pseudo-finless sled. Soon after the fin went back in and the design started to unlock and spread like wildfire - try it without that center fin and see what you find! MAKE : LOVE MACHINELENGTH: 7'10"MODEL: THICK LIZZY - 2+1 (FCS sides)FINISH: Sanded Hot Coat
Christenson Surfboards Dimensions: 7’6 x 21 1/4” x 2 3/4” Volan / Polish Finish Single Fin Box Availability: Kalaheo Shop Mon-Sat 10-6 The Christenson C-Bucket is a mid length single fin pintail that morphs into a mini version of Chris Christenson’s glider design as it grows in length. The C-Bucket can be surfed in a huge range of conditions from soft and mushy to hollow and fast. "Great for trim and glide keeping it smooth and casual for the expert and also a great design for the novice to cruise on and gain style points." Chris Christenson
What are the different Surfboard Fins Set Ups? Which ones are right for me and for the conditions I want to Surf in?
When your not surfing, show off those fins you purchased in your home, shop, or office with this solid wood Purple Heart surfboard fin display stand. The dimensions are 10”Lx2.25”Wx1.75”H and is handmade to fit all standard single fin style surfboard fins. This stand features sliding grooved slots similar to a fin box to hold in the fin and a wide base to add extra stability. Can be modified to create a custom trophy stand for surf contest. Feel free to message me for custom inquiries. This is for the display stand only and not the fin. Fin sold separately. Follow me on Instagram @fin.by.atk
6’6 x 20.5” x 2 5/8" Handshaped in France Art by Julian Klincewicz Following the release of Julian Klincewicz's newest photo book 'Solo Tumult' capturing the surfers riding the massive and beautiful waves at Waimea Bay, TOKEN and our friend Julian collaborated on a special + limited capsule collection that is the essence of a dreamy day at the beach including a double-sided car windshield sun visor, t-shirt, cassette tape, and single fin surfboard. Please contact us for inquiries or to purchase.
Ein Surfboard kaufen nach deinen Wünschen gefertigt und direkt vom Hersteller: Mit unserem Surfboard Shaper Guide für Europa kein Problem!
Thunderbolt Skindog 9'6 Cherry Picker LongboardThis board will be shipped straight from supplier. It is not currently in our shop. 2-3 days shipping to most places in NZSkindog Surfboards9'6 x 23 1/2 x 2 13/16 - 75 LA Traditional single fin longboard with a very different tail design to create lift on the nose with response and drive off the tail.The outline lends itself to traditional longboard designs, wider in the tail, wide in the middle with a slightly more pulled in nose.,With a combination of traditional aspects and new school design we have created a “modern Noserider’ that will Hold and Lift whilst tight in the pocket Nose riding, creating a feeling like no other.Construction: Thunderbolt Silver
When your not surfing, show off those fins you purchased in your home, shop, or office with this solid wood Purple Heart surfboard fin display stand. The dimensions are 10”Lx2.25”Wx1.75”H and is handmade to fit all standard single fin style surfboard fins. This stand features sliding grooved slots similar to a fin box to hold in the fin and a wide base to add extra stability. Can be modified to create a custom trophy stand for surf contest. Feel free to message me for custom inquiries. This is for the display stand only and not the fin. Fin sold separately. Follow me on Instagram @fin.by.atk
A new model from Alex! The experimental dental program. Front foot rail channels with a belly bottom in between for front foot maneuverability. Side bite single plugs, and a center single fin box. Please select Surfboard Shipping at checkout. Domestic shipping rates for surfboards start at $200, with international starting at $450. We will call you to give you a quote upon receiving your order.
This is our version of the classic Egg design. It calls for a smooth & flowy style of surfing, yet it's aggressive enough to get "sunnyside up" if you want it to. The Egg is one of the most versatile surfboard designs and can be enjoyed by anyone, at any level of surfing. From beginner to expert, everyone should have this one in their quiver. It comes standard with a 2+1 fin setup, but can be just as enjoyable, and sometimes even better, ridden as a single fin. 7'0 x 21-1/4" x 2-3/4" Darkwood Stringer Glacier Blue Tint Ghost Brushstroke Gloss & Polish Finish 2+1 Futures Fins Set Up Top Glass: 6oz Deck Inlay + 6oz Deck Patch Bottom Glass: 6oz with 6oz Volan Fin Patch Fiberglass Leash Loop Shaper: Micah Wood Please note, all of our surfboards are built in house at our factory in San Diego, California. Model Design is a collaborative effort between Mike Lynch and Micah Wood. Mike has been developing most of the imperfects models for 10+ years and Micah joined the family in 2021 and has been a major influence on refining our Craft. Micah brings 25+ years of experience to Imperfects Surf Craft and between the two gents, there is over 35 years of surf board experience. Mike and Micah build every single board that comes through our factory from start to finish. All surfboard shipping costs will be calculated after purchase. Please email [email protected] in order to receive shipping quotes on all boards. We also offer free pick-up from our retail store in San Diego.
Ask away at [email protected]
A bag that easily stores all of your surfboard fins in one place. The Surfboard Fin Wallet is made to help organize and store your surfboard fins. Big enough for large single fins, twin keels & bonzer fins. Thin enough to stow away in your board bag or other backpack on your travels. Great for everyday surf, travel and, adventure.