Learn the 8 different types of serger stitches you can do. Included: close-up stitch photos & beginner-friendly descriptions.

This helpful serger guide was submitted by Sarah from Sewing Parts Online. If you're ever in the market for a special sewing foot, pedal, bobbin, instruction manual, etc. be sure to check out their website. They even have parts for older machines like mine. Sarah hooked me up with some great darning feet! And now she's been kind enough to share this amazing guide with us. Enjoy! ... Learning all the new options a serger brings into your sewing life is a challenging and rewarding experience. I know most of us are intimidated by just the appearance of a serger, let alone figuring out what heck you can do with it! However, with a little time and patience, your serger will add all whole new perspective to your sewing. Successful sewing relies on a great community we all make together, so if you know any special tricks or have a few questions, leave them in the comment section below. Someone may have the same question or your trick might save us all a little more time! Firstly, mentally prepare yourself for a little confusion. When you're learning new serging techniques, you will find yourself adjusting, rethreading, crying, readjusting, switching needles...it's a lot to take in. This is because, just like a conventional machine, your setting have to be altered to fit different stitches, fabric, and thread weight...x4 (or x3 or x2 depeding on your stitch, but we'll get to that later). It takes time, but it does get easier and is well worth it! Secondly, give yourself time to really experiment with your serger before starting any projects. Trying to complete a project and compute all your serger settings will more than likely overwhelm brain circuits and cause spontaneous combustion. For me to understand my serger, I used my manual, library books, and surfed the internet to create a Serger Scrapbook. I tried out each stitch and different techniques one at a time. Once I had a stitch or technique done correctly, I glued the fabric swatch in my scrapbook, recorded all my settings as well as some tips and adjustments for different threads. Because there is so much to learn, having a scrapbook is an easy and fast way to recall information. While learning, I would limit myself to a couple hours of serging at any one time and just walk away when you feel the urge to break something. Give yourself time to learn in a stress-free environment and don't judge yourself if you mess up. It gets better! A few things to remember: Use good quality thread. Back away from the bargain bin; it will only end in tears. Sergers have fast moving parts and inferior threads cannot keep up. Maxilock and Toldilock are great options. Do whatever you can to ensure the thread is feeding evenly and consistently off the spool. Any wiggling will cause hiccups in your stitch. I have had to stuff my thread spools to secure them tightly. The thread nets are also very helpful. Use the Stitch Finger as a guide for sewing. Keeping an eye on the Stitch Finger (or the needle when the Stitch Finger is on R) will prevent the material from getting wrapped around the Upper Looper. Love thy Tweezers! I literally cannot thread my machine without tweezers. Tweezers also help if you are trying to detangle thread that wraps up where it shouldn't. Keep those pins far, far away from the cutting blade and the needles. You know how on your conventional machine you can get away with sewing over a pin or two? Not on your serger. You can always use basting spray to secure your fabric. If you must use pins, place them three inches away and parallel to the blade. Oil every 15 hours of serging and dust frequently. That cutting blade makes one heck of a dust pile. If a thread breaks in the upper or lower loopers, I rethread both of them in order just to be safe. Remember to keep your manual handy. I know we all hate trying to read manuals, but they really are a helpful reference. Here we go! Construction A four Thread Overlock stitch is ideal for constructing your projects. It'll finish the edges and hold your fabric securely. This is your basic starting point. You can serge in twill tape or ribbon into the seam to prevent stretch (like in shoulder seams). However, I recommend reinforcing heavy activity areas of clothing on your sewing machine after you have serged (like the crotch area of your pants). I have felt the wrath of not securing this area on a conventional sewing machine...in public. Settings for four Thread Overlock on Muslin using Regular Serger Thread: Left Needle- 5.5 Right Needle- 5.5 Upper Looper- 4.5 Lower Looper- 4 Length- 2 Differential- 1.0 R or S- S Blade- Engaged (Can you spot the spelling error? Thank goodness for spell check!) Corners Serging an outside corner is basically serging a straight line. You can't pivot the material as you would on a conventional sewing machine. You simply serge a 3 inch chain past the end of the fabric, lift the needle and presser foot, and reposition your fabric to serger another straight line. The ends of the chain get secured in the stitch. Serging an inside corner requires you to bunch the fabric in to a straight line and serge normally. Don't worry, your fabric won't stay bunched. Try to get your line as straight as possible. Curves The trick to serging curves is all about control. Make sure you have a firm hand on the fabric and are controlling the feed with purpose. Try to slowly serge until you get the hang of it. Circles To successfully serge a circle, you need a starting point. Cut out a one inch long notch in the edge of the circle. The notch depth should be equal to your finished edge. So if I am cutting off 1/4 an inch, my notch will be two inches long, 1/4 inch deep. Just like serging a curve, maintain control of the fabric. You may find it helpful to draw your hem line and follow it as your serger. I always find it helpful to watch the needle(s) as I serger. Flatlocking Consult your maunal and adjust as needed. The trick is to have no tension in the needle and high tension in the loopers. Also, you want to examine your stitch finger and make sure the thread is hanging about 1/8 an inch past the edge of the fabric to ensure the fabric will lay flat when pulled. I especially love flatlocking with nylon thread in the upper looper. Here are my settings for three Thread Flatlocking with Nylong thread (on muslin fabric): Left Needle- 4 Right Needle- - Upper Looper- 5 Lower Looper- 9 Length-2 Differential- 1.0 R or S- S Blade- Disengaged We see flatlocking often on active wear, but it also adds a great decorative element. With the wrong sides of the fabric together, you get the serging stitch in the right side of the fabric. But if you serge with right sides together, you will get a cool ladder stitch on the right side of the fabric. This is great for weaving in ribbon or yarn or beads. Spread or Two-Thread Converter Talk about a great way to save thread! A spreader, also known as a two Thread Converter, fits into the upper looper, making it think it's working when it's not. The same technique for sewing a three thread flatlock applies to sewing a two thread flatlock. Remember to let the fabric hang over. I find it most accurate to follow the stitch finger as I serger. I aim to have the edge of the fabric meet with the inside edge of the stitch finger. I keep my eyes glued to that and I get the best results. Inserting Spreader (Pardon my dust) Settings for two Thread Flatlock using a Spreader (serger thread and 100% medium weight cotton fabric): Left needle- - Right needle- 1 Upper Looper- Spreader Lower Looper- 5 Length- 2.5 Differential- 1.0 R or S- S Blade- Disengaged Rolled Edges Rolled edges are so beautiful! Especially with decorative threads and on lovely sheer fabrics! Rolled hems are the stitch of choice for light-weight decorative fabrics, but require a few extras to be successful. Regarless of the stitch width, I recommend using some form of stabilizer on the lighter fabrics. You can use water soluble stabilizer or ribbon. I have actually heard of people using plastic wrap to secure the stitch of super delicate material. If you don't have any stabilizer available, you can simply fold the edge on itself and serger. You just need to go back and trim the extra fabric that's left over. Settings for Rolled Hem on Muslin using regular serger thread: Left Needle- - Right Needle- 3 Upper Looper- 9 Lower Looper- 9 Length- F Differential- 1.0 R or S- R Blade- Engaged Settings for Rolled Hem with Nylon Thread on Muslin: Left Needle- - Right Needle- 2 Upper Looper- 2 Lower Looper- 5 Length- 2 Differential- 1.0 R or S- R Blade- Engaged Remember, you will have to adjust your settings to accommodate for fabric weight and the type of stabilizer you use. Gathering You can buy a Gathering Foot for your serger, but it can be done with the general purpose foot, it just needs a little tweaking. I found I get the best definition using lighter fabrics, but you can increase the volume of your gathers by simply manually pulling on the needle thread after you have serged. Settings for Gathering with Nylon Thread: Left Needle- 5 Right Needle- - Upper Looper- 4 Lower Looper- 3 Length- 4 Differential- 2.0 R or S- S Blade- Engaged You can adjust the width as you please. Lettuce Edges A lettuce edge is an awesome decorative edge! You will get the best results from ribbed knits because they have a great stretch and bounce back quality. I tried a lettuce edge on other knits and wasn't pleased with the results nearly as much. The trick is to stretch the material from front to back as much as you can. Really pull on the fabric to get a great lettuce effect. You aren't going to hurt your machine. Slowly sew until you get the hang of it. Keep a firm grip and control the fabric. Settings for Lettuce Edges on Ribbed Knit using Embroidery Thread: Left Needle- - Right Needle- 2 Upper Looper- 2 Lower Looper- 6.5 Length- 2 Differential- 0.7 R or S- R Blade- Disengaged Making Waves There are a couple of ways to make your stitches look like waves. To create a wave look within your stitches and the create a wave effect with multiple rows of stitches. Wave Illusion within the Stitch: If you own a Babylock machine, you have a wave stitch built in. For the rest of us, you will need to do it manually. First, start with your manual's recommended settings for a three-Thread Overlock and make slight adjustments to fit your thread and fabric weight. User your left hand to guide the fabric. With your right hand, loosely hold lower looper thread between your pointed figner and thumb. Count 1-2-3 out loud and sqeeze your finger at the intervals beween each second. So you are literally pinching the thread for a millisecond as it comes off the spool. This takes a lot of practice. I'm still working on my precision. Settings for Manual Wave Stitch on Muslin using Nylon Thread: Left Needle- 5.5 Right Needle- - Upper Looper- 3.5 Lower Looper- 4 Length- 1 Differential- 1.0 R or S- S Blade- Engaged Wave Illusion on Fabric: To create a wave look on your fabric, you serge multiple parallel lines using a shortened three-Thread Overlock Stitch. It looks best when you use decorative thread in the Upper Looper and thread matching your fabric in the Lower Looper. Then, on your conventional sewing machine, you sew a grid of alternating lines that intersect the serged lines. For example, you serge five parallel lines one inch apart. Then you go to your conventional sewing machine (match your thread to the fabric), sew five more parallel lines that cross over your serged line. You alternate the direction you sew to create the wave look. Basically, you are sewing a grid. Settings used on the Serger on medium weight fabric using decorative thread in Upper looper: Left Needle- - Right Needle- 5.5 Upper Looper- 4 Lower Looper- 4 Length- 1 Differential- 1.0 R or S- S Blade- Disengaged Blind Hem Yes, it can be done! This works great in place of a cover stitch on knits. Start with a Flatlock. Adjust your settings to match your fabric and thread. Fold hem to the wrong side of fabric, then back over to the right side of the fabric. For a truely invisible hem, extend the raw edge past the fold and stitch on the extended hem edge (1/4 inch part), allowing the machine to just barely catch the fold. Sew slowly and keep your eye on the needle to make sure it is catching the fabric. Match your needle thread with the color of your fabric. Setting for Blind Hem on muslin using Nylon thread (increase tension in upper looper for regular thread): Left Needle- - Right Needle- 1 Upper Looper- 4 Lower Looper- 4 Length- 4 Differential- 1.0 R or S- S Blade- Disengaged I hope you found this article helpful and good luck with your serger!

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

There are many sewists out there who swear by sergers, and it's no wonder why! Similar to a sewing machine, a serger is used to sew pieces of fabric together, but it does so with a twist. Not only does a serger stitch fabric, but it also cuts off extra fabric and seals in hems with an overlocking stitch, all at once! By using this one-stop-shop machine, you can cut your sewing time in half and produce projects that look professionally sewn. See only some of what you can do with this page full of serger basics and 15+ Serger Sewing Projects! Your stitches will be stronger than if you use a sewing machine and your hems will be protected against fraying. In short, a serger is a godsend for the sewing process. Itching to try out a serger yourself? Whether you want to know more about what a serger is, how to operate one, or to find free serging patterns, this collection has something for you! In this list, you'll find everything from a guide on serging 101 to patterns for couture fall accessories. If you'd like to know more about sergers, read our guide, Is a Serger the Same as an Overlocker? You don't have to scour the internet for serger patterns anymore. We've done the heavy lifting for you so that you can get to sewing designer-level pieces right away. Click any link below, and your serger will do the rest! Plus, we're sharing advice from our readers who use sergers to help you before you buy or as a beginner. Sign Up For More Free Patterns >>>

Did you know that you can easily gather fabric with your serger? No rethreading, no complicated change ups. Just two easy steps and your fabric is gathered!

Did you know that you can easily gather fabric with your serger? No rethreading, no complicated change ups. Just two easy steps and your fabric is gathered!

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

"Opening the lid of your overlock machine is a bit scary.There are many specific numbers and places through which each thread has to pass. Places by which, if it does not pass correctly, your Serger/Overlock Machine will simply -refuse- to stitch. But, Did you know that it is not really necessary to even open the lid in order to change your Serger Threads? In this Post, I will tell you the secret shortcut to change the threads of your Serger Machine quickly and without errors. The best thing is without having to see the instructions! You will see that after learning this trick you will never re-thread your serger the same way again."

Wondering what a serger is? How it works? What it does? We cover that AND the cover hem machine in detail!

Watch this short video with a great tip for labeling the serger dials on your older or faded machine. This will save you from having to check your user manual each time you need a reminder.

Learn how to use a serger to finish seams. Sewing with a serger finishes seams. Easy serging tutorial for beginners.

Serger Care & Maintenance: Cleaning, Oiling & More. Does your serger need a fix? Learn the essentials of serger care & maintenance.

For some this is brand new information, for others it is a refresher. This is an Introduction to Sergers Overall at first glance Sergers look confusing.. sitting down and trying to use one is stres…

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

There are many sewists out there who swear by sergers, and it's no wonder why! Similar to a sewing machine, a serger is used to sew pieces of fabric together, but it does so with a twist. Not only does a serger stitch fabric, but it also cuts off extra fabric and seals in hems with an overlocking stitch, all at once! By using this one-stop-shop machine, you can cut your sewing time in half and produce projects that look professionally sewn. See only some of what you can do with this page full of serger basics and 15+ Serger Sewing Projects! Your stitches will be stronger than if you use a sewing machine and your hems will be protected against fraying. In short, a serger is a godsend for the sewing process. Itching to try out a serger yourself? Whether you want to know more about what a serger is, how to operate one, or to find free serging patterns, this collection has something for you! In this list, you'll find everything from a guide on serging 101 to patterns for couture fall accessories. If you'd like to know more about sergers, read our guide, Is a Serger the Same as an Overlocker? You don't have to scour the internet for serger patterns anymore. We've done the heavy lifting for you so that you can get to sewing designer-level pieces right away. Click any link below, and your serger will do the rest! Plus, we're sharing advice from our readers who use sergers to help you before you buy or as a beginner. Sign Up For More Free Patterns >>>

Wondering what a serger is? How it works? What it does? We cover that AND the cover hem machine in detail!

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

A blog about serging, overlocking, sewing, and other handmade crafts for house and home.

Including discount coupon for Serger Tutorial silk chiffon purchased at Fabcycle ……… keep scrolling…….. Polyester fabric – feels similar to silk but is not a nat…

When a friend of mine called me last week to ask how in the world she was supposed to get minky to behave in the serger, she reminded the Cuddle Minky has a different set

Learn how to use a serger to finish seams. Sewing with a serger finishes seams. Easy serging tutorial for beginners.

. Many of you have noticed. And many of you have asked. And yes, I finally am using a serger. (Or overlocker…….same thing.) Here was the issue. A serger is an investment. And I already have a fantastic sewing machine (Bernina Aurora 440) that does all sorts of great stuff. (Thank you Bernina……we are getting …

A demonstration of what a cover hem machine does.

. Many of you have noticed. And many of you have asked. And yes, I finally am using a serger. (Or overlocker…….same thing.) Here was the issue. A serger

Looking for an easy way to finish raw fabric edges without a serger? In this presser foot guide you will find answers to these questions

. Many of you have noticed. And many of you have asked. And yes, I finally am using a serger. (Or overlocker…….same thing.) Here was the issue. A serger

Looking for an easy way to finish raw fabric edges without a serger? In this presser foot guide you will find answers to these questions

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

In this sewing tutorial you will learn all about sergers sewing machines. Find out what a serger is, how to sew with a serger and what types of stitches sergers have. What does it do? What sewing techniques to look for in a serger/ overlock machine? Learn to use a serger for your sewing projects.

Serger vs Sewing Machine - Do you know difference between sewing machine and serger? Are you trying to decide which you need? Read this post!

. Many of you have noticed. And many of you have asked. And yes, I finally am using a serger. (Or overlocker…….same thing.) Here was the issue. A serger

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

Looking for an easy way to finish raw fabric edges without a serger? In this presser foot guide you will find answers to these questions

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

A comprehensive guide to using and purchasing a coverstitch machine. By Melissa Fehr.

. Many of you have noticed. And many of you have asked. And yes, I finally am using a serger. (Or overlocker…….same thing.) Here was the issue. A serger

There I was, happily serging along, trying to get one more outfit done before leaving for vacation, when all of a sudden I heard that dreaded sound, "crunch!" Ugh, I ran over a pin, AGAIN. It doesn't happen often, but when it does, it isn't pretty...you probably know exactly what I mean. T

In this sewing tutorial you will learn all about sergers sewing machines. Find out what a serger is, how to sew with a serger and what types of stitches sergers have. What does it do? What sewing techniques to look for in a serger/ overlock machine? Learn to use a serger for your sewing projects.

I love my serger. I use it all the time. It does get a little overwhelming trying to remember all of the settings for different stitches and different fabrics. To make things a little easier, I have r

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!

Today, we’re going to take a deep dive into the topic of serger vs. sewing machine. We’ll talk about what a serger is (and what it does) versus a sewing machine. Spoiler alert: by the end of this I’m certain you will be convinced that you absolutely need a serger!