RYOBI introduces the 18-Volt ONE+ 5 in. Random Orbit Sander, an excellent choice to deliver optimal results for a wide variety of sanding applications. The Random Orbit Sander delivers 10,000 orbits per minute (OPM) for a smooth, swirl-free finish on your work surface. Best of all, it is part of the RYOBI ONE+ System of over 175 Cordless Tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, the 18-Volt ONE+ 5 in. Random Orbit Sander includes an assortment of sandpaper of varying grits and an operator's manual. Battery and charger sold separately. California residents see Prop 65 WARNINGS 10,000 orbits per minute for a smooth, swirl-free finish On-board dust collection bag ensures a clean workspace Ergonomic palm grip design increases user comfort during extended use Hook and loop accessory fastening system for added convenience Continuous sanding for up to 40 minutes with use of 18-Volt ONE+ 4.0 Ah LITHIUM+ High Capacity Battery (P108 sold separately) Lock-on switch offers comfortable operation during extended use Part of the RYOBI ONE+ System of over 175 Cordless Tools 3-year manufacturer's warranty Includes: (1) P411 18-Volt ONE+ 5 in. Random Orbit Sander, assortment of sandpaper of varying grits, and operator's manual Battery and charger sold separately Features Item Weight 2.87 Battery Size 18-volt Dust Collection Method Bag Battery Amp Hours 0.0 Power Tool Features Lock On Switch Pad description Random Orbit Sandpaper Product Weight (lb.) 2.87 Cordless Tool Type Finishing Sander Returnable 180-Day Speed (rpm) 10000 Cordless/ Corded Cordless Battery Power Type Lithium Ion Batteries Included No Battery/Charger Tool Only Charger Included Charger Not Included Tools Product Type Power Tool Switch Type Slide Color Family Green Condition New Battery Amp Hours2 No Battery Battery/Charger2 Tool Only Number of Batteries Included 0 Number of Batteries Included2 0 Voltage (volts) 18 Motor Type Brushed Product Width (in.) 10.25 Product Height (in.) 6.5 Product Depth (in.) 6 Manufacturer Warranty 3 Year Warranty
Heavy Duty Drywall Pole Vacuum Wall Sander Tool Always end up with a smooth drywall job by powering up our premium drywall sander. With its powerful round head, the pole sander removes extra plaster, paint, or binding material from your walls. Due to its continuous rotation, the wall sander provides you with clean and even walls that meet your aesthetic. This means that applying paint, wallpaper, and tiles on your walls is made easier, thanks to the drywall vacuum sander. To make things better, the ceiling sander can also be used to smoothen down ceilings for a high-quality finish. Plus, the drywall pole sander also comes with a vacuum connection for easy cleaning. Better yet, the drywall sanding tool comes with a retractable pole that provides you with higher reach. Work on walls and ceilings with ease by powering up the painting wall sander. FEATURES: High Speed: Our powerful drywall sander moves at high speed to ensure a smooth finish. This means that you can work much more efficiently when using the pole sander. Auto Vacuum: To make things more convenient, the wall sander automatically vacuums up debris. This drywall vacuum sander makes cleanup even more hassle-free! Long Reach: The heavy-duty ceiling sander comes with a retractable pole that extends for added reach. This feature of the drywall pole sander lets you work on both walls and ceilings with ease. SPECIFICATIONS: Color: Orange + Black Material: Aluminum + Nylon Net Weight: 12 lbs Rated Voltage: 110V Frequency: 60Hz Rated Power: 750W No-load Speed: 800-1750 RPM Sanding Pad Dimension: φ225mm/8.9’’ Overall Dimension: 10’’(L) x 6.5’’(W) x (5-5.7)’(H) PACKAGE CONTENT: 1x Drywall Sanding Tool 12x Sandpapers 2x Carbon Brushes 4x Gaskets 1x Dust Extraction Hose 1x Dust Collection Bag 1x Allen Wrench 1x Carrying Bag 1x Instruction Manual
Our experts share the basics of how to use an orbital sander correctly. Learn orbital sander tips & tricks while learning how to avoid 7 common mistakes!
Thank you for shopping at Mine Eyes Design POWER TOOLS CLIPART This listing is for 9 power tools clipart images, including sawzall, circular saw, drill, sander, and more! These images are perfect for: carpenters workshop clipart hobbyists scrapbooking homemade invitations decorations greeting cards printing on paper or fabric craft projects personal newsletters sublimation png projects any other creative personal use! Upon ordering you will immediately receive a zip file containing: - 9 PNG files with transparent background (MEDIUM ~1000 pixels wide) - 9 JPEG files with white background (LARGE ~4160 pixels wide) - 9 EPS files If you have any questions about these files or what they can be used for please message me before purchasing! Specs: - Files are high resolution (300 dpi) - Printable at 300dpi up to 11 inches - Transparent background makes it easy to drop clip art on your own project - Watermark will not appear on purchased product - You will not receive any printed product. - Commercial use license is included with this listing, which is good for 500 sales of any item using these images. If you'd like an extended commercial license, you may purchase it here: https://www.etsy.com/listing/604331089/commercial-license-for-mine-eyes-design Returns: We DO NOT offer returns or exchanges on digital items.
Save yourself some time and hassle during your next woodworking project with one of these genius sanding tips.
Hard Drive Sander: Many people have an old hard drive laying around. In this project we will put it to good use by turning it into a powerful disk sander! It's a cheap and easy project, but it has already proven to be very useful when sharpening tools and sanding thou…
Check out this SurfPrep Sander alternative, including using foam sanding pads and getting a sander that hooks to shop vac.
The WORX WX741L.9 MAKERX 20V 2" Angle Grinder is a portable and convenient tool for your crafting needs. This versatile tool fits universally with all 1.5” wheels with 1/4” butterfly-style arbors and 2” wheels with a 3/8” arbor. Its compact brushless motor ensures longer battery life and more power while working. The angle grinder provides precise control for crafting activities with variable speed control up to 20,000 rpm. Its micro-ergonomic design enhances comfort and maneuverability, while the 4-foot power cord allows unrestricted movement. The package includes an angle grinder, 2" cutting wheel, 2" grinding wheel, 2" flap sander, and adapter.
Simple Belt Sander Blocks: Handheld sanding blocks are a must for every woodworker. They allow you to easily hold sandpaper, remove unwanted material, and smooth projects. There are many commercially available sanding blocks, but these sanding blocks can be made quickly from …
This jig holds your belt sander upside down for sanding of handheld project parts. Each sander has a different shape, so custom-cut the plywood sides.
Including Kit: 1 drywall sander with 26ft power cord, 12 sheets of sandpaper(80/100/120/150/180/240 * 2), 1 user manual, 2 dust hoses, 1 carrying bag, 1 hexagonal wrench, 1 dust collection bag, 2 carbon brushes, and 3 vacuum hose connectors. 360° rotating: Detachable 360° rotating sanding disk is easier to sanding dead angle. 7-Level Variable Speed: Simply adjust speed anywhere from 800 to 1800 RPM to optimize the sanding effect according to your needs. 6.5-Amp Brass Motor: Designed with a 6.5-Amp pure-copper motor (780W) to offer easily efficient sanding!
Free Shipping + Free Returns when you purchase from blackanddecker.com The BLACK+DECKER® reviva™ 12V MAX* cordless detail sander's tool housing is made with Tri...
Sanding is the first step to preparing wood for paint or stain. These sanding secrets will help you sand your DIY projects like a pro.
A belt sander is a handy tool for woodworking and if it can sit in a stand it is even better. If you don't have the room or budget for many machines this sander may be right for you. It is fun when you can make your own woodworking tools and even better when you can build something that functions well. I got the basic idea from John Heisz and Jay Bates except mine is one unit without the folding part and some other modifications. This will be an easy build and does not require a lot of hardware. The sander can easily be put in or taken out of the stand and will be able to sit flat, upright and on the side. To start I cut a base 7"x19". This would be the best size to fit my Makita beltsander. Other sanders would have to be measured individually. I measured the width of the sander and added 1/4 inch on each side and for the length I made it long enough so the sawdust bag would fit. Two pieces of plywood 4x3/16" x 7" are glued together to make the front of the stand. They are offset by the thickness of the base board. Later one end will be cut to the height of the sander as you can see in the next photo. A mark is made on the front board the same height as the sander's handle. This will be for a wood handle to lock onto the belt sander handle. A couple of holes are drilled to make a slot for the handle. Draw 2 lines from the circles and then a jigsaw can be used to finish cutting the slot. With my new caliper I measured the height of the sander on the base, this measurement will be used to help build the sides. This is the shape I came up with for the sides. They are made this way so you can gain easy access to the switch with your hand. I rough sketched a few curved shapes until I liked what I had and cut them with the band saw. Making the lever Two pieces of hardwood are used to make this simple turn handle. A few holes are drilled, two in the support block and one in the handle. The block is screwed onto the front board and the handle is attached with a pan head screw. It was able to swivel nicely and grip the sander handle firmly. Notice the slot length and position, it is made this way so the lever can swing 90 degrees. A couple of blocks are attached to the base. They sit snug in the sander's handle and will give extra support for the sander. They are just screwed in from the bottom board. The base, front, lever and sides are coming together. The last thing to do is add the top. The top is screwed onto the sides using 4 drywall screws. The sander is not secured so it looks a bit crooked. Still a few adjustments have to be made. The sander table is in the upright position, I was surprised how it sat on the table without any clamping. Next week we will see what happens when the tables are added and I give it a real test. Conclusion This is a conclusion for this part of the build. So far this is a very easy build. This sander table will get a lot of use in the shop. The lever makes it quick to put in and take out the sander. The next part I will make the tables and some other modifications for the sander. What kind of tools or machines have you made? See Also: Self Centering Jig Large Clamp/Swivel Pad Scrap Bin Challenge
Our customers had recently moved into a prestigious Victorian ‘Lion House’ in Fulham. The house already had wide oak engineered planks however over the years with little maintenance it had become damaged. We were able to thoroughly sand and oil the floor to match the customers’ preferred colour.
Today we're continuing our series on power tools! I'm the gal that usually asks for one for Christmas, and I always have a wish list of tools that I want to add to my collection. So, here we go, I'm bringing you my love of tools in a blog post! This post contains affiliate links to help you find the products I'm describing. It costs you nothing extra to use the links, they are there for your convenience. To see my full disclosure policy, click here. Today is all about the hand held belt sander. I got my first one from my grandfather's tool collection after he passed away, and I admit it sat for quite a long time before I tried it. It's a bigger sander than the palm sander, so I was a little afraid of it. But there will come a project that you just need more power than your palm sander can give you - that's when it's good to know about a belt sander!
Sanding irregular surfaces requires a different tool and a different approach. Watch this video for a few tips to sanding in intricate situations.
Check out this SurfPrep Sander alternative, including using foam sanding pads and getting a sander that hooks to shop vac.
Returnable Yes Defective Code C Color Blue Number in Package 1 pk Sub Brand WallSand Packaging Type Carded Product Type Drywall Pole Sander Each Weight 0.300 LB Velocity N Hazardous Material No
Renew an old furniture such as this wood coffee table with white wax. This sanded wood coffee table takes on a new life by exposing the bare wood.
Cheap and Easy DIY Woodworking Tool Spindle Sander
Looking for woodworking plans? I have dozens of inexpensive and free woodworking plans so you can get started building something today!
Looking for woodworking plans? I have dozens of inexpensive and free woodworking plans so you can get started building something today!
PLANS FOR CNC MACHINES ONLY!! Upgrade your workshop organization with our Belt Sander French Cleat, designed to securely hang your Ridgid Belt Sander on the wall. Crafted with precision and functionality in mind, this digital plan empowers you to create a custom hanger tailored to your specific tool. Features: Effortless Installation: Utilizing French cleat hooks, this mount attaches seamlessly to your workshop wall, providing stability and ease of installation. Optimal Size: Designed specifically to hold a Ridgid Belt Sander, this hanger ensures a perfect fit for organizing and storing your tool while keeping it readily accessible. Material Requirements: Constructed from a single sheet of 0.5" plywood, this project is both economical and accessible, requiring minimal materials for completion. Designed for Shaper Origin: Primarily crafted for use with the Shaper Origin Handheld CNC, our Belt Sander French Cleat ensures precision and compatibility. Additionally, we provide both SVG and DXF files for use with other CNC software, offering flexibility in your fabrication process. CNC Compatibility: Optimized for cutting using a 1/4" bit, our digital files ensure precise and efficient fabrication on CNC machines. Transform your workshop into an organized and efficient space with our Belt Sander French Cleat. Whether you're a professional tradesperson or a DIY enthusiast, this essential addition will revolutionize the way you store and access your tools and supplies. Note: This listing is for digital plans only. No physical product will be shipped.
A belt sander is a handy tool for woodworking and if it can sit in a stand it is even better. If you don't have the room or budget for many machines this sander may be right for you. It is fun when you can make your own woodworking tools and even better when you can build something that functions well. I got the basic idea from John Heisz and Jay Bates except mine is one unit without the folding part and some other modifications. This will be an easy build and does not require a lot of hardware. The sander can easily be put in or taken out of the stand and will be able to sit flat, upright and on the side. To start I cut a base 7"x19". This would be the best size to fit my Makita beltsander. Other sanders would have to be measured individually. I measured the width of the sander and added 1/4 inch on each side and for the length I made it long enough so the sawdust bag would fit. Two pieces of plywood 4x3/16" x 7" are glued together to make the front of the stand. They are offset by the thickness of the base board. Later one end will be cut to the height of the sander as you can see in the next photo. A mark is made on the front board the same height as the sander's handle. This will be for a wood handle to lock onto the belt sander handle. A couple of holes are drilled to make a slot for the handle. Draw 2 lines from the circles and then a jigsaw can be used to finish cutting the slot. With my new caliper I measured the height of the sander on the base, this measurement will be used to help build the sides. This is the shape I came up with for the sides. They are made this way so you can gain easy access to the switch with your hand. I rough sketched a few curved shapes until I liked what I had and cut them with the band saw. Making the lever Two pieces of hardwood are used to make this simple turn handle. A few holes are drilled, two in the support block and one in the handle. The block is screwed onto the front board and the handle is attached with a pan head screw. It was able to swivel nicely and grip the sander handle firmly. Notice the slot length and position, it is made this way so the lever can swing 90 degrees. A couple of blocks are attached to the base. They sit snug in the sander's handle and will give extra support for the sander. They are just screwed in from the bottom board. The base, front, lever and sides are coming together. The last thing to do is add the top. The top is screwed onto the sides using 4 drywall screws. The sander is not secured so it looks a bit crooked. Still a few adjustments have to be made. The sander table is in the upright position, I was surprised how it sat on the table without any clamping. Next week we will see what happens when the tables are added and I give it a real test. Conclusion This is a conclusion for this part of the build. So far this is a very easy build. This sander table will get a lot of use in the shop. The lever makes it quick to put in and take out the sander. The next part I will make the tables and some other modifications for the sander. What kind of tools or machines have you made? See Also: Self Centering Jig Large Clamp/Swivel Pad Scrap Bin Challenge