A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
A Silhouette PVPP Method tutorial used to create a large chalkboard sign.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
A Silhouette PVPP Method tutorial used to create a large chalkboard sign.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
Source J'ai trouvé cette idée plutôt intéressante et je la partage avec vous bien volontiers. Je ferai cependant quelques distinctions entre ces images trouvées sur internet qui m'ont inspirée et ce que vous pourriez en tirer comme activités avec les...
A Silhouette PVPP Method tutorial used to create a large chalkboard sign.
Отечественный рэпер Гио Джиоев, более известный как Гио Пика, сделал себе имя на «дворовой» и «тюремной» музыке. Предвосхищая немые вопросы, сразу отметим: творчество исполнителя совсем не похоже ни на «Сектор Газа», ни на российских блатных шансонье. Песни Гио Пика можно охарактеризовать скорее как урбан-рэп с элементами джангла и дарк джаза. Добавьте к этому удивительный контраст между хлесткими текстами и размеренным, расслабленным флоу, и получите воистину уникального артиста. Начав музыкальную карьеру в 2014 году, рэпер успел записать множество альбомов, синглов и ремиксов. Но все же вершина творчества артиста — тетралогия «Сборник север», затронувшая быт русской глубинки. О ней-то мы и поговорим.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
Subway Art. It's just not getting old with me. Yet. Ask me next year and we'll see if I edit this post. ;) I wanted a piece of that subway art in our home. But I wanted it to have meaning. So I choose to create memory subway art: people, places, and times that hold a special place in my heart, as well as my family's. But I didn't want the lettering to be vinyl. I'm a paint girl and it had to be all about paint. How in the world was I going to get those crisp, clean fonts to pop on my board? I wasn't going to get the same look with hand painted lettering. I knew I could use vinyl and then pull it off, revealing the paint underneath. But that's kind of an expensive way to waste the vinyl and I'm all about saving where I can. So, when I heard that people can use contact paper instead of vinyl, well giddy up sista, cause I'm on that train! (I've never used that phrase before and promise not to use it again). Okay, so after deciding on my "memories" and my fonts, I printed each one out on contact paper. Here are the settings: Media - vinyl; Speed - 8; Thickness - 3; Blade - 2. Just an FYI: I am no expert at Silhouette. I've hardly used the machine and I'm hoping to carve out some time to learn through tutorials. But what I did learn is that the rollers and me, well, we're not friends. If I don't make the rollers happy by making sure the paper is perfectly wide enough to grip it correctly, it never comes out right. Ugh. In the end, I felt like I had a lot of waste. But, I did get a killer deal on discounted contact paper at Home Depot. It turned out to be .17/linear foot. Giddy up! (sorry, again) After printing the lines, I cut them individually and peeled back the film to reveal the wording. (Note: use colored contact paper otherwise you won't see what the heck you are working with). Use your hook tool to get rid of the bits of contact paper that didn't come off. When all the strips were ready, I lined them up in the correct order and got an idea for how big I needed my board. I cut my board and decided I wanted the lettering to be white, so I painted the board white. Rolling paint kicks butt. Now, I needed to transfer the lettering to the board. Silhouette sells transfer paper. But, remember, I'm cheap. So, instead, I used clear contact paper. I cut them to about the size of my strips and pushed down really good. This shows putting a clear strip of contact paper over the contact paper lettering. Next, I made sure to dry fit all the strips on the board. After deciding where to place the first strip, I pulled the clear contact paper up transferring the lettering. Go slow with this process so you don't miss any dots on the i's or punctuation. Next, I pressed the first strip into place. Use your handy-dandy YMCA membership card to press it on good. Fine, use your credit card instead. I did find the best method to pulling the lettering off the transfer paper (clear contact paper), was to pull hard, but slowly, while I pressing into the seam of the contact paper. Actually worked like a charm. Putting a lot of pressure on the YMCA card I made sure to use a ruler to check all my measurements after and before each new strip. I wanted even space on the left and right, as well as pretty evenly spaced between lines. When finished putting the words on, I was kind of in love. At this point, I was so psyched with the way it was coming out. But not psyched enough to leave the contact paper on. Looking good! For the love of Pete, if you learn nothing else from this tutorial, learn this: PAINT OVER THE LETTERS WITH YOUR BASE PAINT!! This will seal the edges so the next color paint you put on will not seep under your lettering. You want nice, crisp letters?!? DO IT! Okay, I think I made my point. A few very light coats will work. After this layer of paint has dried, add your top color. Since I just did a whole living room re-do with grays, I decided on a slate gray color. After the few coats of that bad boy had dried, it was time to take the letters off. See, this is where the vinyl would be wasted. I'm just using the contact paper letters as a template, if you will. At .17/linear foot, I can sleep at night. If you heeded my warning suggestion, your letters should be crisp and clean. Don't they just look baaaa-u-ti-ful? You can leave your sign here, but of course, I had to do a little distressing. I used a very find sandpaper on my electric sander and went to town. You can see the distressing on the edge of the sign. That's it. I didn't even seal it as it's just going on my wall and I'm not expecting little hands to touch it. Now it's a big part of my family wall vignette. I love signs and I love fonts and I'm fond of memories. The perfect combination. Debbie Sharing with: Sugar Bee Crafts Today's Creative Blog Not Just A Housewife Reasons to Skip the Housework Me and My Boys The Blackberry Vine Home Stories A 2 Z Hope Studios Crafty Confessions Uncommon Designs Elizabeth & Co. New Nostalgia Homework Ladybug Blessings Clean & Scentsible Gingersnap Crafts Someday Crafts My Girlish Whims The Stuff of Success Sugar and Dots The Thrify Home House of Hepworths Made in a Day Happy Hour Projects At the Picket Fence Six Sister's Stuff The Shabby Nest Tatertots & Jello DIY Showoff Stone Gable
…oder auf Deutsch: Malen, Vinyl kleben, Malen, Vinyl abziehen 🙂 – Conny zeigt uns heute an einem tollen Wandbild wie diese Technik funktioniert! Material: Leinwand oder Holzstück Farbe (z.B. Kreidefarbe) in 2 – 3 Farben Pinsel Schablonenfolie oder Vinylresten Glitzervinyl (optional) Transferfolie Maler-Klebeband Rakel Haken Alle verwendeten Folien findest du bei www.littlefeet.ch. Alle weiteren Materialien z.B. […]
A Silhouette PVPP Method tutorial used to create a large chalkboard sign.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
Happy almost weekend! I'm sorry for the absence for the past few days. We've been SO beyond busy lately between getting ready to move, a f...
FeaturesCuttlebone is essential for all birds and promotes good beak health by keeping it trimmedIncludes a metal hangerSince cuttlebone is a natural product, they vary in color and sizeUses far less actual cuttle than traditional bonesHelps keep beaks trimPack of 25SpecificationsColor: NaturalMaterial: CuttleboneSize: 5 in.Weight: 3 lbs- SKU: PVPP1191
Další z karet pro čtení s porozuměním. Tentokrát kolíčkové.
A Silhouette PVPP Method tutorial used to create a large chalkboard sign.
Das perfekte animierte Shigure ui-GIF für deine Unterhaltung. Entdecke und teile die besten GIFs auf Tenor.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
A complete step-by-step tutorial on how to use your Silhouette and vinyl to create a hand painted sign using the PVPP method.
