DetailsThe award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated. Quick release riving knife greatly reduces binding/kickback risk Built-in retractable caster system for immediate shop mobility Arbor lock for rapid blade change Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence® System ensures accurate cuts Enclosed cabinet with cast iron base for rigidity Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments. Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge Specifications:Style: CabinetBlade Diameter: 10"Arbor Diameter: 5/8"Arbor Speed: 4,300 RPMMaximum Depth of Cut: 3-1/8"Maximum Depth of Cut at 45 Degrees: 2-1/8"Maximum Rip Left of Blade: 13-1/2"Maximum Rip Right of Blade: 30"Table in Front of Saw Blade at Maximum Depth of Cut: 11-1/4"Maximum Diameter of Dado: 8"Maximum Width of Dado>: 13/16"Table Type: Cast IronTable Height from Floor: 34-1/2"Table Size: 22" x 30-1/2"Table Size with Extensions: 42" x 30-1/2"Dust Collection Minimum CFM Required (CFM): 350Motor Power: 3 HPMotor Phase 1Motor Voltage: 230Motor Amps: 13Powermatic stock number 1792002K
Have a question? Ask owners.Have a question about this? Ask people who own it. Start typing and see existing answers.Learn more Instant Answers Start typing and we'll see if it was already asked and answered. If there aren't already some matches, submit a new question. You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!) Good Topics To Ask About Which items will best meet your needs What customers who own an item think of it How to use, fix, or take care of an item Product information General advice related to the types of products we sell Our store policies Customer Support For questions about an order you have placed, please contact customer support directly.
Larger projects and larger work pieces call for more power, more re-saw capacity and more cast iron like the Powermatic PM1800B-3 Band Saw 5 HP. The heavy-duty band saw also features the legendary quality, precision and attention to detail that has been helping woodworkers expand their ambition for more than ninety years. This band saw is the perfect addition to your tool collection. Computer-balanced cast iron wheels reduce vibration and noise Micro-adjustable and virtually tool-less bearing guide system gives close blade control while reducing friction Exclusive Powermatic T-Square style Accu-Fence maximizes accuracy and safety Band saw with special grooved thrust bearing stabilizes smaller blades Blade tension lever has full tension, partial tension and release settings for easy blade changes and tracking Foot brake with magnetic switch interrupt provides user with hands-free stopping option Sturdy cast iron table and trunnion assembly offers maximum rigidity for large work pieces Oversized side plate can be used in horizontal or vertical position Accu-Fence has complete adjustability for aligning to blade and squaring to table Solid cast iron upper and lower wheels create momentum needed for heavy re-saw
Details Powermatic 1792800B Description At Powermatic, we have a woodworker’s intuition which drives our design process. We look for every opportunity to raise the workshop experience to new levels of performance and functionality. So when we set out to redefine what it means to use a Powermatic Drill Press, we wanted
The Powermatic 2020B wood lathe is a full-featured shortbed version of the popular Model 3520B. Designed specifically for woodturners with limited floor space and/or those primarily interested in bowl turning, the Powermatic 2020B has a 30% smaller footprint than the 3520B yet offers the same great features along with improved accessibility and the added convenience of a short bed.If you’ve always wanted a 3520 but just haven’t had the space, the Powermatic 2020B might just be the perfect fit for you!Lathe Features: 20" Dia. capacity 20" Between centers Electronic variable speed with low and high speed ranges Digital RPM readout Solid cast iron construction Built in spindle indexing on the head stock Tailstock with internal storage Spindle lock Sliding headstock Chrome plated hand wheels Self ejecting laser-etched tailstock quill Sliding hammer knockout rod with brass tip Attached tool caddy and a metal shelf for tool storage Accessories fully interchangeable with 3520B Specifications:Swing Over Bed: 20"Swing Over Tool Rest Base: 17"Distance Between Centers: 20"Spindle Height: 44" from floorSliding Headstock Movement: Full length of bedSpindle Taper: No. 2MTTailstock Quill Travel: 4-1/2"Headstock Spindle Thread: 1-1/4" x 8TPISpindle Speeds: High range 125-3,200 rpm; Low range 50-1,200 rpmNumber of Indexing Positions: 48Bed Construction: Cast IronMotor: 2HP 1 phaseMotor Voltage: 220Motor Current (Amps): 6.2Recommended Circuit Size (Amps): 20Standard Accessories:3" FaceplateRevolving Cone Center4 Prong Drive CenterFaceplate Wrench14" Tool RestSliding Hammer Knockout Rod with Brass TipCall for the lowest prices anywhere on the Powermatic® 2020B Lathe and complete lathe packagesFor additional information or to order please contact: Technical Support 1-800-551-8876
Have a question? Ask owners.Have a question about this? Ask people who own it. Start typing and see existing answers.Learn more Instant Answers Start typing and we'll see if it was already asked and answered. If there aren't already some matches, submit a new question. You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!) Good Topics To Ask About Which items will best meet your needs What customers who own an item think of it How to use, fix, or take care of an item Product information General advice related to the types of products we sell Our store policies Customer Support For questions about an order you have placed, please contact customer support directly.
The Powermatic 8 in. Parallelogram Jointer offers performance and value in a machine loaded with features. Each Powermatic jointer has an extra-long 82-in. bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design of this wood jointer keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth-of-cut adjustment. This design also ensures the table remains perfectly parallel, even after years of tough duty. The 1/8-in. depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This woodworking jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. The powerful 2-HP motor is totally enclosed in a heavily constructed steel stand, providing plenty of power for the most demanding jobs. Straight knife cutterhead with 3 high-speed steel knives creates a clean cut Large 8 in. x 82 in. precision-ground cast-iron table surface for heavy-duty woodworking Patented handwheel with worm gear system for precise fence tilting Parallelogram design for close table-to-cutterhead proximity and fast depth-of-cut adjustments High-mount switch is easy to reach on this Powermatic jointer machine Parallelogram design allows for easy and accurate adjustment of tables 5 year
54 four-sided carbide inserts provides smoother, quieter cutting and a superior finish Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth Extra long tables are mounted on dovetailed ways for extended workpiece support Handwheel operated worm gear system for smooth fence tilting High-mount switch and control box for operator convenience Magnetic push blocks can be stored on the machine within constant reach Non-mar fence insert protects the table from scratches during adjustments
These rugged, heavy-duty Stock Feeders feature continuous-duty motors that transfer power from the gear box to the feed roller through the roller chain and sprockets, providing superior positive feeding for all types of materials. The fully adjustable support columns feature moveable universal joints and heavy locking mechanisms that lock the feeder in horizontal, vertical, or angle feed positions. Solid cast iron construction of bodies, bases and universal joints provide stability with vibration-free feeding. Features Cast iron construction Continuous duty motors transfer power from the gear box to the feed roller Moveable universal joints and locking mechanisms lock the feeder in horizontal, vertical, or angle feed positions Roller chain and sprocket design provide positive feeding for all types of materials Rollers can be changed out easily and quickly Smart roller system allows for tire to be replaces with out replacing the assembly Solid cast iron construction of body pieces and base Support column is fully adjustable for horizontal, vertical or angled feeder position Universal joints provide stability for vibration free feeding Specifications Feed Rate (FPM) 13/36/43/108 Swing (Deg.) 360 Motor Power (HP) 1 Maximum Height of Rollers Parallel to Tabletop (In.) 8-1/2 Motor Phase 1 Motor Voltage (V.) 115 Prewired Voltage (V.) 115
Evolution represents a process that is never fully complete. For a woodworker, inspirations evolve as life experiences shape our creativity. Skills evolve as we share tips and techniques with friends and mentors. And our workshops evolve as we refine our skills. At Powermatic, we're proud to introduce the latest example of our own evolution, the PM1000 cabinet table saw. As with every product Powermatic builds, the PM1000 redefines the limits of design, innovation and durability. Cabinet saw that only requires 115V power A blade surround and collection hose provide an unobstructed path, maximizing dust collection Conveniently located hands free power switch Tool-less guard assembly with independent side leaves is easy to use, maximizing safety The sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts Exclusive AccuFence provides rigidity and precision The poly-V belt drive system reduces vibration and maximizes efficiency Ergonomically designed 7" handwheels provide momentum – making blade height and bevel adjustments easy Arbor lock allows for one handed blade changes with minimal tools Cast iron work surface features a beveled edge Bevel scale is conveniently located with large, easy to read numbers Hinged motor cover provides quick access to the interior of the cabinet Specifications:Style: CabinetBlade Diameter: 10"Arbor Diameter: 5/8"Arbor Speed: 4200Maximum Depth of Cut: 3-1/8"Maximum Depth of Cut at 45 Degrees: 2-1/8"Maximum Rip Left of Blade: 12"Maximum Rip Right of Blade: 30"Maximum Diameter of Dado: 8"Maximum Width of Dado: 13/16"Table Type: Cast IronTable Height from Floor: 34-1/4"Table Size: 20" x 27"Dust Collection Minimum CFM Required: 350Dust Port Outside Diameter: 4"Motor Power: 1-3/4 HPMotor Phase: 1Motor Voltage: 115/230Prewired Voltage: 115Motor Amps: 15/7.5Powermatic stock number 1791000K
Have a question? Ask owners.Have a question about this? Ask people who own it. Start typing and see existing answers.Learn more Instant Answers Start typing and we'll see if it was already asked and answered. If there aren't already some matches, submit a new question. You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!) Good Topics To Ask About Which items will best meet your needs What customers who own an item think of it How to use, fix, or take care of an item Product information General advice related to the types of products we sell Our store policies Customer Support For questions about an order you have placed, please contact customer support directly.
Tool: Powermatic PM1000 Manufacturer: Powermatic MSRP: $2400 (50" fence) Powermatic’s PM1000 table saw isn’t over-shadowed by its big brother, the PM2000, and it can fit into your home workshop…
This Powermatic 20 in. Planer with Helical Cutterhead offers performance and value, loaded with standard features not found on other woodworking machines in its class. The powerful wood planer with a 5-HP motor and 20-in. planing capacity will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional systems, and the 100 four-sided carbide knife inserts seat themselves without requiring a set-up gauge. The 5-in. dust port connects easily to any dust collector. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast-iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine-groove outfeed rollers ensure a smooth feed. The precision-ground and polished cast-iron table rides on four steel columns, giving this wood planer plenty of support for the larger work piece. Heavy cast-iron extension wings ensure a flat, smooth cut. Helical cutterhead with 100 four-sided carbide knife inserts provides smoother, quieter cutting and finer finish than conventional systems Chip breaker and pressure bar assist to reduce snipe Fully enclosed base cabinet with integrated casters makes it easy to move this planer machine around the shop Chrome-plated, ergonomic handwheel makes adjustments smooth and easy Cast-iron table with extensions creates a big 55-1/2 in. x 20 in. working area Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8 in. maximum depth of cut and trouble-free operation Feed rollers and cutterhead on this Powermatic planer supported by full cast-iron head assembly for rigidity 460V operation requires an additional 460V magnetic switch: 209-5016G 5 year
These rugged, heavy-duty Stock Feeders feature continuous-duty motors that transfer power from the gear box to the feed roller through the roller chain and sprockets, providing superior positive feeding for all types of materials. The fully adjustable support columns feature moveable universal joints and heavy locking mechanisms that lock the feeder in horizontal, vertical, or angle feed positions. Solid cast iron construction of bodies, bases and universal joints provide stability with vibration-free feeding. Features Cast iron construction Continuous duty motors transfer power from the gear box to the feed roller Moveable universal joints and locking mechanisms lock the feeder in horizontal, vertical, or angle feed positions Roller chain and sprocket design provide positive feeding for all types of materials Rollers can be changed out easily and quickly Smart roller system allows for tire to be replaces with out replacing the assembly Solid cast iron construction of body pieces and base Support column is fully adjustable for horizontal, vertical or angled feeder position Universal joints provide stability for vibration free feeding Specifications Feed Rate (FPM) 13/26/33/66 Swing (Deg.) 360 Motor Power (HP) 1 Maximum Height of Rollers Parallel to Tabletop (In.) 8-1/2 Motor Phase 3 Motor Voltage (V.) 460 Prewired Voltage (V.) 460
The Powermatic 3520C wood lathe builds upon the venerable 3520B with modern styling and exciting new features. The 3520C features a moveable control box, redesigned spindle lock, digital spindle indexing readout, adjustable riser blocks for 6" of height adjustment, and more. Cast iron construction, attention to detail, and user friendly design make Powermatic lathes an excellent value for turners of all skill levels. Backed by Powermatic's 5 year warranty and service centers throughout the USA. Features Moveable control box Redesigned spindle lock Includes 4" riser blocks for height adjustment Digital spindle indexing readout ACME thread tailstock quill Increased weight for stability Capacities Swing over bed: 20" Swing over tool rest: 15-3/4" Distance between centers: 35-1/2" (working distance with centers installed) Maximum outboard capacity: 38" (with optional bed extension in low position) Headstock and Tailstock Spindle thread: 1-1/4" x 8 TPI Spindle taper: No. 2MT Spindle through bore diameter: 5/8" Spindle speeds: low range 15-1200 RPM; high range 40-3200 RPM Tailstock quill taper: No. 2MT Tailstock through bore diameter: 3/8" Tailstock quill travel: 4-1/2" Tool Rest Tool rest width: 14" Tool rest post diameter: 1" Tool rest locking mechanism: Bushing Motor and Electrics Motor power: 2HP Power requirements: 220V, 1 phase Recommended circuit size: 20 Amps Drive system: Poly V belt, 2-step pulley Measurements Assembled size (LxWxH): 64" x 24" x 46" (without 4" riser blocks) Bed length: 51" Spindle height from floor: 40-5/8" (without 4" riser blocks) Bed gap: 2-1/2" Net weight: 726 lb. Shipping weight: 770 lb. Powermatic part # 1353001
The Powermatic PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors. Features Integrated caster system built into the cast iron base for instant shop mobility Spindle height digital readout for making fine incremental adjustments on multiple passes Heavy duty 30" x 40" precision ground tabletop for smooth stock feeding Convenient quick lock belt tensioning for easy speed adjustment Industrial fence system with fine adjust dials for more precise positioning 5HP totally enclosed motor offers plenty of power Two spindle speeds (reversible) for a variety of work Superior clear cutter guard promotes safety, allows observation of the entire cut Table predrilled and tapped for feeder mounting in two locations Fence has dual featherboards for work holding Specifications 4" port for attachment to dust collection system 3/4" and 1-1/4" interchangeable spindle collets Featherboard hold downs Deluxe miter gauge Integrated caster system Dust Collection Minimum CFM Required : 600 Dust Port Diameter (OD/in) : 4 (dual ports) Electrical Controls - Magnetic Starter : magnetic Fence Size (L x H/in) : 18-3/4 & 4-7/8 Height (in) : 45 Length (in) : 40 Model Number : PM2700 Motor HP : 5HP Motor Phase : 3Ph Motor Voltage : 230V/460V* Net Weight : 664 pound Overall Dimensions : 40x37x45 Part Number : 1280102C Prewired : Prewired 230V, *requires 460V magnetic switch Reversible : Yes Router Bit Collet Diameter (in) : 1/4 and 1/2 (optional) Spindle Diameter (in) : 3/4, 1-1/4 Spindle Size Under Nut (in) : 3/4 spnd = 3-3/4, 1-1/4 spnd = 6 Spindle Speed (RPM) : 7,500 & 10,000 Spindle Travel (in) : 4 Table Height From Floor (in) : 35-1/2 Table Insert Opening Diameter (in) : 2.55, 4.16, 5.75 Table Inserts : (3) 2.55", 4.16", 5.75" I.D. Table Opening Diameter (in) : 7-3/8 Table Size (in) : 40 x 30 Table T-Slot (in) : standard Width (in): 37 Shipping weight 690 lb. Shipping / Billing Information All shipments must be inspected and any damage reported within 3 days of receipt. Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges. This product ships direct from the manufacturer: Your order will ship in 4 -7 approximately business days. This product is considered special order. Your account will be charged when you place your order. Express or overnight shipping is not available for this product. Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries. Return Information All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions. Warranty Information Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft.
Have a question? Ask owners.Have a question about this? Ask people who own it. Start typing and see existing answers.Learn more Instant Answers Start typing and we'll see if it was already asked and answered. If there aren't already some matches, submit a new question. You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!) Good Topics To Ask About Which items will best meet your needs What customers who own an item think of it How to use, fix, or take care of an item Product information General advice related to the types of products we sell Our store policies Customer Support For questions about an order you have placed, please contact customer support directly.
Details Powermatic 1791259B Description At Powermatic, we believe that ambition is the fuel that drives progress. Every product we engineer is born out of the same idea: How can we empower woodworkers to do more? In shops across the world, craftsmen are continually pushing the limits of their creativity, and in turn, c
Have a question? Ask owners.Have a question about this? Ask people who own it. Start typing and see existing answers.Learn more Instant Answers Start typing and we'll see if it was already asked and answered. If there aren't already some matches, submit a new question. You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!) Good Topics To Ask About Which items will best meet your needs What customers who own an item think of it How to use, fix, or take care of an item Product information General advice related to the types of products we sell Our store policies Customer Support For questions about an order you have placed, please contact customer support directly.
Evolution represents a process that is never fully complete with our heavy-duty table saws. At Powermatic, we're proud to introduce the latest example of our own evolution, the Powermatic PM1000 Table Saw 1.75 HP. As with every product Powermatic builds, this table saw redefines the limits of design, innovation and durability. Table saw with conveniently located hands-free power switch Precision ground cast iron work surface features beveled edge for smoother operation Tool-less guard assembly with independent side leaves is easy to use, maximizing safety Exclusive AccuFence provides rigidity and precision Sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts Requires only 115V connection for easy installation Poly-V belt drive system reduces vibration and maximizes efficiency Blade surround and collection hose provide unobstructed path, maximizing dust collection Arbor lock allows for one-handed blade changes with minimal tools Ergonomically designed 7 in. handwheels provide momentum, making blade height and bevel adjustments easy
Details Powermatic 1794224K Description The Powermatic 4224B is the newest member of the industry-leading family of lathes. Over 900 pounds, the 4224B is the biggest, heaviest, and most capable lathe we’ve ever built. It expands the limits of creative possibility, and takes your passion to a whole new level. With newly
This 8-inch jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73" long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base - store them on any metallic surface for instant access. Helical cutterhead with four-sided inserts provides smoother, quieter cutting and a superior finish Extra long tables are mounted on dovetailed ways, for extended workpiece support Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth High mount switch for operator convenience Handwheel operated worm gear system for smooth fence tilting Magnetic push blocks can be stored on the machine within constant reach Non-mar fence insert protects table surface Specifications:Number of Carbide Cutters: 54"Cutterhead Speed: 7,000 RPMCutting Capacity: 8"Table Size: 73" x 8-1/2"Table Height from Floor: 32"Infeed Table Length: 35-1/4"Outfeed Table Length: 35-1/2"Fence Size: 38" x 4-3/4"Fence Tilt Degrees: 45 Forward, 45 BackwardFence Positive Stops: 45, 90, -45Dust Port Outside Diameter: 4"Motor Power: 2 HPMotor Voltage: 230Motor Amps: 8Powermatic stock number 1610086K
Behold: a curated list of gifts for woodworkers that'll leave them ready to drill, saw and sand to their hearts content.
Have a question? Ask owners.Have a question about this? Ask people who own it. Start typing and see existing answers.Learn more Instant Answers Start typing and we'll see if it was already asked and answered. If there aren't already some matches, submit a new question. You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!) Good Topics To Ask About Which items will best meet your needs What customers who own an item think of it How to use, fix, or take care of an item Product information General advice related to the types of products we sell Our store policies Customer Support For questions about an order you have placed, please contact customer support directly.
This new JET GHB-1236 Geared Head Bench Lathe is engineered to cut and taper with exacting accuracy. Positioned on a heavy-duty stand with a newly added built-in footbrake, the GHB-1236 features precision induction hardened ground bed-ways, spindle roller bearings, and high-quality steel hardened gears in the headstock for ultimate working durability. JET Geared head bench lathes are designed with an enclosed gearbox for smooth, quiet operation. Precision roller bearings support the hardened and ground spindle resulting in tight tolerances. Each JET Lathe comes loaded with features you've come to expect, all backed by the industry leading JET 2-year Warranty."}},"base-catalog-308563448":{"__typename":"BaseProduct Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments Spindle lock and built-in spindle indexing on the headstock for drilling hole patterns, routing flutes and other equally spaced features Vacuum system provides quick method of chucking bowl blanks 15 Amp quad receptacle for easy reach of powered accessories Two 100-Watt task lamps provide ideal lighting Air nozzle with quick connect for clearing dust/chips Set of dead centers which hold a spindle for visual comparison Laser etched quill is self ejecting 2 position mount for the optional bed extension Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
The Tissot Chemin Des Tourelles Powermatic 80 is precision, luxury, traditional and contemporary all displayed in a superb timepiece offering up to 80 hours power reserve. This watch is not only a practical timekeeping tool but will also stand out for the right reason on the wrist of any man. 42mm stainless steel case. Water-resistant up to 50 m. Domed scratch-resistant sapphire crystal with antireflective coating. Swiss automatic movement with see-through case back and power reserve up to 80 hours. Specifications Case Material: Stainless Steel Case Size: 42mm Band Material: Stainless Steel Dial Color: Blue Water Resistant: 50 Meters Movement: Automatic Power reserve: Power Reserve Up To 80 Hours Clasp Type: Butterfly Clasp With Push Buttons Crystal: Domed Scratch Resistant Sapphire With Antireflective Coating Warranty: 2 Years Manufacturer Warranty Buy with confidence from an Authorized Tissot Watch Dealer.
Loaded with features, the 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45° and 90° and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle. Multi-position belt head locks at any angle from 0° to 90°; includes indexing pin for 0, 45°, and 90° stops Belt and disc tables are precision ground cast iron with miter slots Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support 12" disc is balanced for flat, even coverage Specifications:Style: Combination Belt/DiscDisc Diameter: 12"Disc Speed: 2,375 RPMDisc Table Tilt Degrees: 15 Up, 45 DownDisc Table Size: 17-1/4" x 9"Sanding Belt Size: 48" x 6"Belt Speed: 2,410 RPMBelt Table Tilt Degrees: 45 DownBelt Table Size: 13-1/4" x 7-1/2"Sanding Arm Locking Positions: 0, 45, 90Dust Collection Minimum CFM Required: 400Dust Port Outside Diameter: 4"Motor Power: 1-1/2 HPMotor Phase: 115/230Motor Voltage: 115/230Prewired Voltage: 115Motor Amps: 14/7Powermatic stock number 1791291K
Have a question? Ask owners.Have a question about this? Ask people who own it. Start typing and see existing answers.Learn more Instant Answers Start typing and we'll see if it was already asked and answered. If there aren't already some matches, submit a new question. You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!) Good Topics To Ask About Which items will best meet your needs What customers who own an item think of it How to use, fix, or take care of an item Product information General advice related to the types of products we sell Our store policies Customer Support For questions about an order you have placed, please contact customer support directly.
Information and resources about the Powermatic Model 66 Table Saw
You're a bit like a mortiser: there aren't many that can do what you do as well as you do. Get the Powermatic Benchtop Deluxe Mortiser for a tool that is as great at getting the job done as you are. This mortiser takes the guesswork out of drilling thanks to its preset, in-line depths that let you drop to the depth you need without racking the bit. It's versatile handle switches easily from the left and right sides without the need for tools so it can be where you need it. With its powerful 3/4-horsepower engine, it can generate up to 1,725 rpm of spindle speed. To keep this heavy piece of equipment in place, it features a stock hold-down with a double lock system. There ain't no one better than you, and nothing better than this Powermatic Mortiser to get the job done.
Need a solid cast-iron lathe with big capacity. Well, look no further, because this 18 in. x 47 in. Wood Lathe has it all. You'll appreciate the cast-in shelf brackets for adding additional mass, variable-speed control in 2 torque ranges, digital speed indicator, forward and reverse switch and convenient utility basket. Single-phase frequency drive technology provides the electronic variable-speed control without the 3-phase power requirement. All you need is standard 220-Volt, single-phase power to be up and running in no time. You'll be amazed by all the quality and innovative features this lathe has to offer."}},"base-catalog-306132591":{"__typename":"BaseProduct Motor only requires a 115-Volt single phase input while providing a consistent torque with 1 HP, 230-Volt, and 3 phase output using an inverter Most range of height in the Powermatic family, adjust centerline to floor from 34 in. to 46 in. for maximum control and comfort Magnetic control box displays both digital speed and indexing and can be relocated for convenience and safety 24 positive locking indexing position, displayed on the repositionable magnetic control box, simplifies the indexing process Sliding headstock and removable tailstock make outboard turning easy Cast iron bed reduces motor vibration for decreased noise and added precision Variable speeds from as low 15RPMs to as high as 3600RPMs With constant monitoring of the motor the inverter keeps torque consistent Lathe easily disassembles for better portability Acme threads on tail stock for smoother operation and longevity Includes 8 in. tool rest with 1 in. post Attached tool caddy allows convenient access to centers, wrenches, and accessories Banjo features a non-marring, pinch style clamp for solid tool rest placement Chrome trimmed hand wheels are ergonomic for a comfortable feel Main power disconnect on rear of headstock lock out for safety Bed Extension not included
The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs. Features: • Sliding table with 4-foot stroke works with miter head, hold-down and fence to accommodate everything from multiple end cuts to tenons • Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability • Large table with built-in slider with room for stock feeder • 7" vertical spindle travel allows stacked tooling • Spindle tilts negative 5° to positive 45° for increased versatility • Large diameter multiple table inserts accommodate virtually any size cutter • Five spindle speeds in forward and reverse with lighted indicator Specifications: Dust Collection Minimum CFM Required : 800 Dust Port Diameter (OD/in.) : 5 (dual ports) Electrical Controls - Magnetic Starter : 24V Magnetic Fence Size (L x H/in.) : 46 x 5 Fence Travel (Major and Minor/in.) : 5-3/8 and 3-5/8 Height (in): 53 Length (in): 51 Maximum Diameter Cutter Above Table (in) : 12 Maximum Diameter Cutter Below Table (in) : 9 Motor HP : 7-1/2HP Motor Phase : 3PH Motor Voltage : 230/460V Net Weight (lb): 1,100 Overall Dimensions : 51 x 44 x 53 Part Number : 1791284 Prewired : Prewired 230V Reversible : Yes Router Bit Collet Diameter (in) : 1/4 and 1/2 Slide Table Size (in) : 11-1/4 x 51-1/4 Spindle Diameter (in) : 3/4, 1, and 1-1/4 Spindle Size Under Nut (in) : 3/4 Spindle - 3-1/2, 1 Spindle - 6-1/4, 1-1/4 Spindle - 6-1/4 Spindle Speed (RPM) : 3000, 4000, 6000, 8000, and 10,000 Spindle Travel (in) : 7 Table Inserts : one tilting, two straight Table Size (in) : 51-1/2 x 33-1/2 Table Travel (in) : 49-1/4 Tilting Spindle (deg.) : 5° back, 45° forward Width (in): 44 Shipping weight 1,280 lb. Shipping / Billing Information All shipments must be inspected and any damage reported within 3 days of receipt. Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges. This product ships direct from the manufacturer: Your order will ship in 4 -7 approximately business days. This product is considered special order. Your account will be charged when you place your order. Express or overnight shipping is not available for this product. Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries. Return Information All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions. Warranty Information Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft.
The helical cutterhead on this planer provides smoother cutting and a finer finish than conventional knives, and the 74 four-sided indexable carbide knife inserts do not require adjustment after installing. Three V-belts transfer maximum power from the 3HP motor to the cutterhead. Your workpiece will get substantial support from the precision ground cast iron table and two large extension wings. The 4" dust port angles the collection hose away from the work area. Stock return rollers atop the machine speed repetitive cuts. The serrated steel infeed and smooth steel outfeed roller allow for 1/8" maximum depth of cut and trouble-free operation. A 2-speed gearbox features an automatic chain tensioner. The one-piece welded steel stand has built-in lockable casters for easy movement around the shop. The Byrd® helical cutterhead with 74 four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems Powerful 3HP TEFC motor controlled with a magnetic switch for safety Three V-belts transfer maximum power to the cutterhead Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8" maximum depth of cut and trouble free operation Large cast iron handwheel positions table quickly and easily Large, precision ground cast iron table and extensions provide maximum workpiece support Two speed gearbox features automatic chain tensioner One-piece welded steel stand has built-in lockable casters Steel top-mounted return rollers speed repetitive cuts Angled dust chute with 4" port positions collection hose away from the work area while providing efficient chip and dust collection Specifications:Cutterhead Speed: 4,500 RPMCutterhead Diameter: 2-7/8"Number of Carbide Cutters: 74Maximum Depth of Cut: 1/4"Maximum Full Width Depth of Cut: 1/8"Maximum Planing Width: 14-7/8"Maximum Planing Thickness: 6"Minimum Planing Length: 8"Infeed Roller Diameter: 2.07"Segmented Infeed Roller Diameter: 2.07"Outfeed Roller Diameter: 2.07"Bed Rollers Adjustable from Front: N.A.Table Size with Extensions: 15" x 48"Table Support: 4 ColumnColumn Diameter: 2-3/16"Digital Readout: Inch / MetricDust Collection Minimum CFM Required: 800Dust Port Outside Diameter: 4"Motor Power: 3 HPMotor Phase: 1Motor Voltage: 230Powermatic stock number 1791213
The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP or 3HP motors are totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs. Features: Extra long 82" table for expanded work support Parallelogram design helps maintain table parallelism and eases table raising and lowering Handwheel with worm gear system for precise fence tilting (Patented) 1/8" depth of cut limiter for fast table positioning High-mount switch for operator convenience No-mar fence insert protects table