How to remove the yellow orange color from pine wood with tinted wood wax for a weathered oak natural finish ideal for farmhouse, coastal or modern decor.
Ted’s Woodworking Plans
The miter saw is one of the easiest tools for beginners to learn! Get all my tips on how to use a miter saw, and how to get accurate cuts!
How to build a DIY outdoor couch for only $30 in lumber! This outdoor couch works great in small spaces, is budget friendly, and super cute too!
Check out these simple scrap wood projects and ideas to try! These easy small wood projects are perfect beginner woodworking projects too!
A Kreg Jig makes building furniture extremely easy for newbie woodworkers! Here are 40 beginner-friendly Kreg Jig project ideas to inspire you!
A fluted Rast, a retro Malm, and more IKEA nightstand hacks you shouldn’t sleep on.
Sanderson Acrylic Eggshell is a hard-wearing, water-based paint suitable for interior walls, ceilings, woodwork, radiators and metalwork. It has a washable, low sheen finish, making it perfect for kitchens, bathrooms and conservatories. Also suitable for use on interior and exterior woodwork and metals which have been primed.
A simple guide for beginners to learn how to use a Speed Square or carpenter's square in woodworking. Learn about all the features and uses!
Use these clever tricks to work faster and better
How to Build a Built-In Bench with Storage My dining room was super small and a table was awkward in the space. So, we decided we needed a built-in bench with storage so the table could fit more on the side of the room. Here is how I built it. Materials for a Built-In Bench
Au mur, à même le sol, décoré de poignées ou peint, les déclinaisons sont multiples ! Cet Ikea hack IVAR n'a pas fini de vous surprendre.
My problem was a lack of understanding about how a screw joint actually??works.??
These simple last-minute DIY gifts for him are perfect for any occasion! He will love these ideas and they will not be shoved in a drawer!
Here are 10 amazing DIY floor ideas which can be done as a holiday or weekend project and it doesn't cost a fortune to buy the materials.
Writing about life, motherhood, disability advocacy and more.
If you love unique art and have absolutely nothing to do with your time, come and be inspired by this enormous pixel art using thousands of chunks of wooden dowels! It's basically a large-scale diamond painting project, and is actually pretty fun if you love tedious/repetitive tasks. Our living room…
It's not the size that counts.
In no more than 15 minutes this woman made a bench for her dining room from scratch!
About six months ago, Paul and I made a trip to Ikea where I picked up two rast chests. I had all of the intentions in the world to begin working on them ASAP, but of course they stayed unopened until about 3 weeks ago. The reason for the delay was because I was unsure exactly what I wanted to do with them. If you have seen RAST hacks before, then you surely know that the options are endless when taking on these hacks. Months ago I blogged about different RAST ideas, but I ended up not using any one else’s tutorial, and instead created the look myself. Truthfully, they didn’t end up perfect (then again what DIY project doesn't) but ultimately I love them and I think they look great in our room. In case you are unfamiliar with the IKEA RAST chest, it is an unfinished pine chest that well, in my opinion, looks a little blah as is. They retail for $35 each, making them very appealable if you want to make changes in your bedroom but on an affordable budget and are willing to give them a little TLC. Below I have listed out the steps on how I transformed ours after assembling the chests per the instructions that come with it. 1. In order to be able to add legs, I needed to add a base to the bottom of the chest since it doesn’t come with one. In order to do this we cut (2) 1 x 6 boards the width of the nightstands and attached them with brad nails. 2. We attached metal top plates to each of the corners using the nails that come with them. This is where the legs screw into, and I found them at Lowes. 3. We used a 2’ x 4’ board that was 1” thick to cut new tops for each of the nightstands so that we could use molding and give it a more finished look. To calculate the width of the size of the board you would need to cut it you would want to use this equation: Width of the nightstand + [2 x (width of trim)]. We then attached the top with wood glue and brad nails. After the top was attached we filled in the holes that we created as well as the ones that come with the chest using wood filler. I also screwed in the legs into the metal top plates, which were bought from Lowes. 4. I used a 1 x 4 at the bottom of the chest so that it would be flush with the rest of the night stand. (If you look at the unfinished RAST chest image above, you will see that the bottom section is indented). To secure the 1 x 4 in place, we used brad nails and nailed it into place from the side. 5. Once the wood filler had dried, I sanded the top and side of the chest using a random orbital sander. Using a random orbital sander isn’t mandatory, I just did because the wood that comes from IKEA isn’t really smooth and I wanted it really smooth for when I painted it. To make sure that I sand everything evenly, I like to scribble light pencil marks on the wood. I then continue to sand the piece of wood until all pencil marks have disappeared. If you use light pencil marks, it shouldn’t take long at all. 6. Next, I added lattice pieces to the nightstand drawers. I used 1.5” lattice that I got from Lowes. I cut the pieces using a miter box and used wood glue to adhere them to the drawers. To hold everything in place while the wood glue dried, I used clamps. 7. I used the same lattice as I did in step 6 and outlined the bottom rim of the nigh stand with it. The lattice strips were also attached using wood glue and brad nails. 8. I used extra molding trim that we had lying around from our DIY board and batten fireplace, and secured it under the top piece using wood glue and several brad nails. To cut the molding trim, we used a miter box. We originally got the 5/8” molding trim from Menards for reference. 9. Next we filled in all of the remaining seams and holes using spackle filler. I was able to use this product since I was painting them, but if you are staining them then use wood filler since the spackle filler won’t stain. 10. Once the spackle filler has dried, lightly sand the areas using a high grit sand paper (about 180 or 220 grit) 11. Next comes the priming. I applied one layer of primer on everything (including the feet) and used primer paint that I already owned. To apply it, I used a foam roller brush and in the tighter areas and corners I used a small foam brush. Primer dries rather quickly and gets sticky, so it's important that you don’t keep going over the same areas so that you prevent bumps from forming. 12. After the priming is completely dry (I like to let it dry overnight), smooth any bumps out that might have formed using a high grit sanding block (I used a 220 grit). 13. Next it’s time to paint! I used behr’s paint in Swiss Coffee. I applied two coats with the same foam rolling brush and foam brush that I used to apply the primer. Between the two coats you can lightly sand out any bumps or lines. Also, between both coats we drilled the holes for the hardware. 14. Once the paint had dried, I put the hardware on! The hardware that I used is from Menards. Then put the drawers back into the chest, and voila the nightstands are finished!! What do you think of them? I think I love them. Also, please ignore the crooked handle on one of the drawers. I was unable to fix it before I left, but I will once I get home! I was originally going to stain the nightstands, but I'm so glad that I ultimately painted them because I love the crispness of the white in this space. The nightstands that previously were in this room, were very short in comparison to the bed, so I also love that the night stands are more proportionate now. Later this week, I will be sharing other things that have recently been added to our master bedroom so stay tuned! Want to stay up to date with more of my home decor, DIY, lifestyle and other posts? Then follow me along on any of the following so you won't miss out:) Pinterest / Instagram / Facebook / Bloglovin'
See how Slaughterbeck Floors repairs a hole in hardwood floors caused by termite damage. Visit our flooring showroom in Campbell, CA for more information.
Learn how to build basic base cabinets with face frames. Ideal DIY cabinet design for kitchen, laundry, built ins, and more!
Learn how to give that golden oak table new life with this simple DIY farmhouse kitchen table project.
Bought this old belling piano for $120.00 for the sole purpose of making a Bar/drinks cabinet. But most say from the start, this project is not for the person looking for a quick project. You might want to search for a broken piano after you see this.
I fell in love with a patio set not too long ago by Restoration Hardware and then my dream fell apart when I saw the price tag! 1300$ for one chair? Well that wasn’t going to work for our bud…
These DIY storage shelves are simple to build with 2x4 lumber and plywood! Download the free woodworking plans and make your own today.
This beautiful DIY daybed is budget-friendly and simple enough that even a beginner can build it. Full step-by-step tutorial plus video.
How to Build a Built-In Bench with Storage My dining room was super small and a table was awkward in the space. So, we decided we needed a built-in bench with storage so the table could fit more on the side of the room. Here is how I built it. Materials for a Built-In Bench
It is actually possible. It’s called Swedish paint or Flour paint.
It is truly amazing how many Easy and Beautiful Budget Friendly Farmhouse Projects You Can Build With 2X4s! Great Weekend Projects
You might want to grab some PVC pipe when you see these borderline brilliant ways to use it in your home!We never imagined doing all this with plain old PVC pipes! #pvcdiy #pvcpipeideas #pvcprojects
