Hello and thanks for much for checking out my listing. This is a little miniature home-themed shelf book nook display. The entire thing measures 12" high by 9.75" wide by 4" deep. It is made in a vintage shelf with vintage dollhouse furniture, matchbox car, tiny tea cup and saucer and various found objects including dried flowers, watch parts, tiny dishes, hand made paper mini books and more. I used original vintage post cards and papers for the wallpaper at back of the scenes. The bed includes velvet hand made pillows, and an antique lace blanket. The bottom drawer opens. The drawer and cabinet doors on mini hutch also open. Everything in photos is included and glued down. It is for decor not for playing with. The colors scheme is a wonderful vintage aged lace, golds, creamy whites and dark greens and reds. This is meant to be art, not a dollhouse. Miniatures are of varying scales some bigger than others and do not all fit the same scale. The matchbox car, for example, is small than the bed. It is meant to be an artful collage, not a true miniature dollhouse that adheres to specific scale.
Create a mini classroom with this furniture kit! The pre-cut wooden pieces can be easily assembled with simple instructions and are 1:12 scale. Based on the Mouse Mansion book series by Karina Schaapman, the kit lets you bring the charming world of Sam and Julia to life. This furniture kit includes two miniature school desks with benches, a lectern, a blackboard, an ABC board, and a cabinet. Paint, glue, and accessories are sold separately. Suitable from 6 years | Scale: 1:12 | Material: Wood | FSC | CE, UKCA
Hier kommt Dekoratives und Persönliches wirkungsvoll zur Geltung. Ob gerahmte Bilder, antike Spielzeugautos oder die Porzellansammlung - alles bleibt vor Staub geschützt. Die BRIMNES Serie sorgt in Sachen Aufbewahrung für ein einheitliches Bild.
==DIGITAL STL FILES ONLY== This is a digital file for 3D printing, you will not receive a physical product. A 4 shelf cabinet with 2 working doors in 1/12 scale adds a touch of style to your miniature home. The cabinet is 6.4 inches tall, 3 inches wide and 1.25 inches deep (163mm tall, 75mm wide, 32mm deep). The upper shelf heights are (from the top): 25mm (at the centre), 21mm, 21mm and 24mm. Prints in one piece with no need for supports. No gluing required, the doors flex slightly to allow the hinges to be popped into place. Recommended 3D Printer Settings - 0.2mm layer height or use 0.12mm for more detail. - 20% infill - Position on it's back for printing. Miniature books are not included. These are available under a separate listing in the shop. I've test printed on my FDM 3D printers and will print well on SLA resin printers too. Appreciate any feedback or questions. ==DIGITAL STL FILES ONLY== This is a digital file for 3D printing, you will not receive a physical product. **** These designs are intended for adult collectors. The finished 3D printed product can be small and delicate in nature and could potentially be hazardous to young children. **** Reminders: - This is a digital file not a physical product. - Please do not produce this file for sale or distribute the digital file - Please review Etsy's information on Digital Downloads https://help.etsy.com/hc/en-us/articles/115013328108
Créez une mini chambre d'enfant avec ce kit de meubles ! Les pièces de bois pré-découpées peuvent être facilement assemblées avec des instructions simples et sont à l'échelle 1:12. Basé sur la série de livres La Maison des Souris de Karina Schaapman, le kit vous permet de donner vie au monde charmant de Sam et Julia. Ce kit de meubles comprend un mini lit superposé, un lit simple, une table de chevet, un bureau, un tabouret, des étagères et une armoire. La peinture, la colle et les accessoires sont vendus séparément. Convenient à partir de 6 ans | Échelle : 1:12 | Matériau : Bois FSC / CE< UKCA
Vintage Wooded Handmade Tiny Book Shelve Cabinet w/Doors Wall Unit Doll House Furniture Toy Miniature Furniture alexlittlethings.etsy.com Vintage Handmade Wooden Toy Furniture Living Room Book Cabinet with doors shelves wall unit Wooden Doll House Furniture Miniature Furniture 1.6 Scale. Look at all pictures for details and condition. Ask questions. These are super nice I bought them for my twin daughters Doll house. It is about 4 1/8" W by 3 5/16" T by 1 3/8" D They can be painted stained to match. It would make a great addition to any child’s dream dollhouse. Pre owned in nice played condition. All sales are final and as-is. Thank you for looking. Come back again soon. New items listed daily. Look here for more GREAT items : alexlittlethings.etsy.com
Item specificsCondition
Gothic Style Miniature Cupboard Kit Create a captivating gothic-style cupboard, curio cabinet, or book nook for your bookshelf with this comprehensive kit! Designed to fit perfectly between books, this miniature masterpiece features a false back panel for fairy lights (included) and functional doors that open and close. Features: Complete Kit: Includes all laser-cut pieces needed for assembly. Perfect Fit: Designed to fit seamlessly between books on a shelf. Functional Design: Features a false back panel for fairy lights and doors that open and close. Customizable: Paint and embellish to make it uniquely yours. Measurements: Height: 9 3/4 inches Width: 6 inches Depth: 2 3/4 inches Shelf Width: 1 7/8 inches Distance Between Shelves: 2 1/8 inches Additional Details: Windows: Use a clear plastic file divider for windows; cut to shape and glue to the insides of the doors. Assembly Instructions: A link to step-by-step assembly instructions is included with your purchase. Creative Freedom: Paint and plan lighting for your book nook to enhance the finished piece. Unleash your creativity to make this one-of-a-kind addition to your bookshelf! **recycled shipping materials used when available**
Item specificsCondition
Item specificsCondition
Item specificsCondition
I thought I would show you how to make a simple interior door and jamb from mat board. I took the opening measurement from the Hobby Builder's catalog so this door is standard for today's dollhouses. Once you have learned the method you can make doors of different dimensions. I have bought lots of books from Dover Publishers.com. This book is very good for doors and windows. It doesn't give measurements but the ideas are great. Some examples of the pages. I will begin with the jamb or the frame in which the door sets. The Hobby Builder's catalog listed the opening as 3" wide, 7" high and 3/8" deep. Cut strips of mat board 3/8" wide. Cut at least 40". I am going to be using yellow carpenter's glue through out this tutorial. Cut 4 pieces of the mat board 7" long, that's in the picture above. Glue two pieces together and glue another two pieces together. You now have two pieces 7" long that are double thickness of mat board. Cut from the mat board 3 pieces 2 3/4" long. Glue two of these pieces together. Leave the third piece for later. Cut 1/8" wide strips from mat board, at least 20". Measure and mark on the doubled strips of mat board the center, 3/16" from either side. Glue the 1/8" wide strip along the line. There will be 3/16" left on one side. This is called the "stop". It stops the door so it only swings one way. Here are the three pieces of the jamb with the stop glued on. There are two sides and one top. Pay attention to how I have this laid out. With your craft knife cut off 1/8" of the stop at the top of one side. Do the same thing with the other side. This is what the top of the side should look like after you've made the cut. I am holding the top of the jamb in my hand. The side in on the table. The top fits down onto the side. The stop should line up all around. I have the sides glued to the top. Do you see that the sides are covering the ends of the top? Look at the stop, it is lined up all around. Now, for the third piece of 3/8" wide mat board you set aside earlier, this is the bottom of the jamb or threshold. Measure and mark the center, then mark 1/8" away from that. Use your craft knife to cut on the marks. Cut 1/16" deep. This is the threshold with the cuts made. Use 220 grit sand paper to round off the long edges of the threshold. Glue the threshold to the bottom of the jamb. The stop is in the openings you cut out. Showing another view of the threshold. Please let this dry. I measured the inside of the jamb for the measurement of the door. I left a little play, that's carpenter talk for extra space between the door and jamb. This measurement is 2 11/16" x 6 3/4". Cut this from mat board. This is my cut sheet. I've drawn the door in 1 inch scale and then measured what I need to cut. You will notice I've got my 3/8" measurements together then I've got an oddball 3/4" measurement and then the 9/16" measurements are together. If you are using a table saw or mat cutting system this makes it easy to follow. Set the width once and make those cuts and move onto the next one. You will have all your strips cut to width. All you will have to do is measure for the length and cut. I've got my 3/8" strips cut. I've cut 4 of the 3/8" strips 6 3/4" long and glued them along the sides of the door. I've done this to both sides of the door. Although I have the length written down I usually just dry fit and mark with a pencil where I need to cut for length. I will do this for the rest of the door, both sides. I use my square and craft knife to cut the strips to length. I've got a 3/8" strip at the top, 3/4" strip in the lower middle and a 9/16" strip at the bottom. I do this for both sides. Just a word here, this would make a fine door right now if you want. I am dry fitting and marking for the center pieces, they are from 3/8" strips. I've got the center strips glued in, both sides. I want to show you something. Do you see the two pencil marks on the top strip? I am measuring for the center. This is an old carpenter's trick, the old carpenter being my husband, HA! You don't have to divide fractions. I'm using a scrap of mat board. Lay your ruler down, it's length is between the 1/16 and 1/8 inch marks. Make a pencil mark at what looks to be over half to you. Remember the measurement, mine is 1 11/16". I am measuring from the left side. Now, I've rotated the mat board and I am measuring from the other side, 1 11/16". I've made a pencil mark. You should be able the "eye" the center without measuring. Use 220 grit sand paper to round off the square edges of the mat board. Don't do the outside edges of the door just the inside of the rectangles you made with the strips. Just a note here, this makes a fine door right now. To imitate the raised panels we will cut from the 9/16" wide strips of mat board 4 pieces 3 1/4" long and 4 pieces 1 1/4" long. Use 220 grit sand paper to round off all 4 sides of these pieces. After you have rounded off the edges glue these pieces into the center of the rectangles of the door, both sides. I've got the door just setting in the jamb. I am using scrap mat board from a framer. Got a good buy on some large pieces for $3.00 and $5.00 a piece. They were discontinued colors. Last time I bought a piece from Michael's it was $15.00! Going to make the trim for the jamb. Cut from mat board a few pieces, enough for both sides of the door, a fat 1/8" wide and 5/16" wide. Glue the fat 1/8" strip to one side of the 5/16" strip. Use 220 grit sand paper to round off the the edges of the strips. I use The Chopper for my mitres. I've made the first cut. I have no trick for you in cutting mitres, I am sorry. It's all in the measuring, measure twice, cut once. Glue the trim onto the jamb, on the outside piece of mat board. Leave the inside piece showing, that's called the reveal. That's why I doubled the mat board on the jamb so we would have something to glue to, even if it is a single piece of 1/16" thick piece of mat board. The jamb is going to be glued into a door opening. I have the trim glued on. Cut two of everything so you have trim for the other side of the door jamb. You will put that on after you have the door and jamb in the opening. I used 180 grit sand paper to sand round one side of the door. This makes it easier for the door to swing with a pin hinge. The rounded side is the side that will have the pin hinge. That's all I use. I haven't gotten to putting real hinges on, yet. I have a small stash of these short thick brass pins, I don't know where I got them from. You can use a straight pin or dollhouse nails for the hinge. Putting the pins in is a little tricky. Place the door into the jamb and mark on the door and jamb, have the marks line up. You want to be 3 /32" from the edge of the door. Your door is 3/16" thick, you want to have the pin in the middle of that. Transfer the 3/32" mark to the top and bottom of the jamb and drill using a tiny drill bit. You don't have to drill into the door, only through the top and bottom of the jamb. The pin will go into the door pretty easily. Insert your pins. Don't worry if you don't succeed on the first try. If you make too many attempts just put glue in the holes, let dry and try again tomorrow. Tigger's on my table. I hope you try this out. I had this made in a couple of hours, that beats waiting for it being shipped. Have fun, Expand on it, Make it better . . . . . Just Keep Making Minis! TTUL Kris P.S. I added a picture showing one of the pins in the bottom of the jamb or threshold. A pin goes in the top of the jamb, too. The pins are inserted into the side of the door that you rounded off with sand paper. I hope this helps a little more.
Get your yard shed organized with our vintage ideas for potting soil storage containers, seeds, garden tools and more. Recycle your way to tidiness!
Item specificsCondition
Item specificsCondition
