Yowza, it took Kate 70 hours to build this 1955 Betsy McCall DIY dollhouse from scratch. See her step-by-step, blow-by-blow -- and the fabulous results!
Oh I wish I could afford this. This wonderful Lundby house is listed on eBay currently with lots of photos. Link: http://cgi.ebay.com/Mid-Century-Swedish-Dollhouse-Doll-House-Eames-LUNDBY-/290496533259?pt=LH_DefaultDomain_0&hash=item43a2f1530b
Buckle up and get ready to take a ride through this 1960 Ontario time capsule home, built by Toronto architect Gardiner Cowan. The home is brimming with natural materials — like douglas fir, mahogany, stone, grasscloth and tile — and an open and airy floor plan with lofty cathedral ceilings. The use of earthy materials and…
Enhance your dollhouse or diorama with this 1:12 scale Mid-Century Modern Coffee Table SVG/PDF download, designed for miniature enthusiasts and DIY crafters. This coffee table captures the sleek, iconic look of mid-century modern style, perfect for creating an authentic vintage aesthetic in your miniature settings. Whether you're using a laser cutter, Cricut, or hand cutting, this digital file provides all the precision needed to craft a beautiful piece of miniature furniture. Key Features: Scale: 1:12, ideal for dollhouses, dioramas, and other miniature displays. Design: Classic mid-century modern with clean lines and angled legs, perfectly capturing the essence of the era. Materials: Designed for use with 1/8" plywood for laser cutting or 1/16" balsa wood for Cricut cutting. Formats: Includes SVG and PDF files compatible with laser cutters, Cricut, and other cutting machines. Dimensions: 4 inches long (10.1 cm), 2.25 inches deep (5.7 cm), 1.125 inches high (2.9 cm). This digital download includes detailed instructions, making it easy to create your own miniature masterpiece. Perfect for collectors, DIY enthusiasts, and anyone looking to add a touch of mid-century elegance to their miniature scenes. Download instantly and start crafting today! Laser Cutting: Materials Needed: 1/8" (3 mm) thick plywood. Steps: Open the provided SVG files in your laser cutting software. Secure your plywood on the laser bed. Adjust the settings according to your laser cutter's specifications for 1/8" plywood. Perform a test cut on a scrap piece to verify the settings. Proceed with cutting the pieces. Sand any rough edges for a smooth finish. Hand Cutting: Materials Needed: 1/8" (3 mm) thick balsa wood, a sharp hobby knife or a fine-tooth saw, sandpaper. Steps: Print the provided PDF template on paper. Cut out the paper template pieces. Trace the template onto your balsa wood. Carefully cut out the pieces using a sharp hobby knife or fine-tooth saw. Sand the edges until smooth and even. Cricut Maker: Materials Needed: 1/16" (1.5 mm) thick balsa wood. All items have to be cut twice and glued together to reach a final thickness of 1/8" (3 mm). Steps: Upload the SVG files to Cricut Design Space. Place your 1/16" balsa wood on the Cricut StrongGrip mat and secure it with masking tape. Choose the appropriate settings for cutting 1/16" balsa wood. You may need to select "Basswood" and adjust pressure settings accordingly. Conduct a test cut to ensure accuracy. Once settings are verified, proceed with cutting. Sand the edges if needed. Assembly Instructions: Legs: Attach the legs to the crossbar. The front and back legs are designed to be slightly angled for stability. Tabletop: Glue the legs with crossbar in the middle to the table top. Final Assembly: Ensure all parts are aligned properly. Use wood glue for secure bonding. Allow the glue to dry completely before handling. 🚫 Note: This digital file is for personal use only and cannot be shared or resold. All copyrights belong to InDollScale. Please note: I have not personally tested the Cricut cutting of "wood." This is a digital download. No physical product will be shipped. 🚫 Ready to dive in and discover more treasures? Visit our Etsy shop at InDollScale. https://www.etsy.com/shop/InDollScale Thanks for stopping by! We hope you enjoy exploring our store and finding exactly what you're looking for. Happy browsing! 😊
Step into a timeless space, where midcentury charm meets cozy comfort in this thoughtfully renovated apartment.
Yowza, it took Kate 70 hours to build this 1955 Betsy McCall DIY dollhouse from scratch. See her step-by-step, blow-by-blow -- and the fabulous results!
The pods are lined, floor-to-ceiling, with Baltic birch and embellished with sliding...
I’m super excited to start 2015 with a new “mini-series” — literally. Over the course of the next few months, I’ll be documenting the process of building, decorating and furnishing a 1:12 scale, split level, wooden dollhouse — made from an original 1955 Betsy McCall Do-It-Yourself Dollhouse pattern. Is anyone else as pumped as I am…
Does your midcentury bathroom need a new vanity — but one that looks like it’s always been there? Christine’s all-new “1962” bathroom got me to thinking about all the bathroom vanity designs that readers have created and installed over the years, so I gathered a variety in one place. Above: Kate makes a design design. Above:…
Ten years on from last week, we find ourselves in 1967. A year after I was born...And the Lundby house has changed to the roofline we all recognise today. According to The Lundby Letter dated March 2005 (PDF link), in an article written by Olle Wilson (page 3) "In 1967, 35,000 houses were manufactured. The factory had 40 employees and some of the production was done by people at home.Approximately 100 people were busy making furniture and other decorative accessories in their homes. "And Elisabeth Lantz adds that the legs were sold from the late-1950s until 1973. I bought this house unfurnished (apart from the kitchen wall cupboard) in August 2004. Off Swedish eBay equivalent Tradera. I'm guessing it wasn't aimed at the export market...So let's have a look around!Interestingly enough, the kitchen hasn't changed much in the last ten years, apart from the change in colour of the table and chairs (who left the fridge open, huh?!) And, if you're a Lundby purist you'll note that the swing bin is actually Caroline's Home. I think it works. So there! A lovely dining room shot...And one of the things I love most about this house:the planter against the stair rail, one of the most delicate parts of the Lundby house. I'm so pleased mine has lasted as well as it has... Still downstairs, here's the bathroom:And upstairs, the study area:fillled with roccoco furniture, and lit at night (my first lighting project!) Here's the fireplace in the lounge at night:(note that the chairs are the same as 10 years ago, but covered in flowery fabric, not striped) .___________________________________________________________________________________ Visit my other dolls houses
I was asked by Roberta how I make the "buttons" that I put into the back cushions on my furniture. I thought that was a good topic for a tutorial for this month. This is not an upholstery tutorial. I have that listed on the left side of the blog, Make and upholster a 1 inch scale chair. I have a back cushion cut out and I have the button placement marked on the pattern. Place your pattern on the cushion back and punch through the foam core with a pencil to mark placement. There are the holes made by the pencil. I am using my Dremel to drill holes through the foam core. That's probably a 1/16" bit. Use tacky glue and apply it on the back cushion. Can you see that I have left the area around the holes without glue? This is my first layer of Thermolam Plus. I buy this at JoAnn's or Walmart, do not buy the fusible. With your sewing scissors cut out around the holes. I say sewing scissors because we don't use those to cut paper with, do we? We only use our sewing scissors for fabric so they stay sharp. This is the second piece of Thermolam Plus. The second piece is glued on and the holes are cut out. This the last piece of Thermolam Plus. I have this piece glued on, I will not cut the holes out on the last piece. I've cut a large enough piece of fabric out for my back cushion. Turn the fabric to the wrong side and place your pattern on the fabric and mark the holes. My holes have been marked. I have a tip for you, on a flat back cushion like this you can enlarge your pattern on the computer by a very small amount, maybe 5%. This spreads the holes out and gives more fabric to be tucked into the dimples you are going to be making for the buttons to set into. If you use more padding on the back cushion you would want more fabric to go into the dimples. It's a little trial and error on just how much to enlarge. On a curved back cushion, like in the first picture at the top you do not have to do this. Mark the pattern on the fabric as is, the curve takes care of giving you extra fabric. I use button hole or carpet thread to pull the dimples with. You could probably use sewing thread just as well. I double my thread and make a knot at the end. Start the needle from the back of the back cushion. Use the marks on the fabric to line up your needle. Yes, the knot will go through the hole, it will catch on the Thermolam Plus. Take a small stitch on the front and come back out at the back. Go to the next hole in the back, insert on the mark on the fabric, take a small stitch and come back out and on to the next hole. Don't pull too hard, the dimple doesn't have to be deep. I've sewn all of the dimples and I've gone back into the first hole and took another stitch. Knot off and cut your thread. Here is the front of the cushion with all of the dimples sewn in. If I were making a chair I would be ready to glue the cushion into it now. To make the buttons I use a leather punch. I bought this at a hardware store, I know that Michaels also carries these. I use white glue, too. I want the card stock to stay wet for awhile and the white glue does not dry too fast. I also use a double ball stylus. I bought this one at Michaels. I use craft foam to shape the buttons. This is also available from Michaels. Apply white glue to a piece of card stock and press your fabric onto it. I am using a contrasting fabric so you can see the buttons when I'm finished. The leather punch is not designed to cut through fabric, it's not sharp enough and it's cutter presses against a flat metal surface. The fabric isn't thick like a piece of leather. A paper punch doesn't work. The card stock and fabric are wet and hard to cut out. So what do you do . . . . I place another piece of card stock on top of the fabric. This gives a tiny bit of depth for the cutter to cut through and it works. I have put the extra card stock under the card stock that is glued to the fabric but that is hard to separate after the circle is punched out. If you don't separate the two pieces of card stock you run the risk of the button falling off because you didn't glue the button on, you glued the extra card stock on. This does work, it just takes some practice. Here are my circles setting on two pieces of craft foam. I am using the small end of the double ball stylus to shape the circles into buttons. The size of circle you cut is up to you. For this tutorial I used the 1/8" cutter. My buttons are shaped. Leave them in the craft foam to dry. It's important to let them dry. You will be pressing them into glue and if they are not hard and dry they will loose their shape and you will have to start over. There is one button. Apply a dab of tacky glue into the dimple. I have all of my buttons glued into the dimples of the back cushion. O.K. so they aren't real buttons but I think they look great on a piece of miniature furniture. I hope you are all getting outside, I really think winter might be over!! If you have any questions please e-mail me at [email protected]. If you have pictures for the Follower's Gallery send them to [email protected]. Have fun, Expand on it, Make it better . . . . . Just Keep Making Minis!! Kris P.S. I'm sorry I forgot to put the reminder about sending in your photos of finished tutorials, please send me photos, the address is [email protected]. If you have any questions please e-mail me at the same address and I will do my best to answer them.
"I'm a Barbie™ girl, in the Barbie™ world Life in plastic, it's fantastic Imagination, life is your creation" Aqua The world of the 60-70's saw the advent of plastic-made furnitures . This 5th set of the " The happy days " series proposes to you two plastic beds on the model of the glassfiber and polyester beds sold at the end of the 60's and at the beginning of the 70's . The glassfiber technology allowed to design " shell " beds on the design of ... Ship hulls ( See last pic of a 1:1 scalebed sold at the end of the 60's and the beginning of the 70's ) The dimensions of the beds are given in mm on the blueprints . They suit for a matress of dimensions 80mm X165mm X20mm ( reduction at the 1:12th scale of a matress of dimensions 90cm X 190 cm ) For the second bed , the file 2DemiLit70s2monoplace112.zip is a half-bed : You have to print it in two copies to have a complete bed . YOU CAN REDUCE THE BED AT THE 1/24th scale when printing by choosing " reduce 50 % " on the printing settings As it is a numerical product , the stage and the wallpaper are not furnished . You will better print it with eco-frienly plastic like PLA . You can print as many files as you want . Only for strict personnal including as a gift , not for commercial use , neither digital nor printed . Copyrighted material © . WARNING : Not suitable for children under 12 years old . Contains small parts .
Wallpaper by Bradbury and Bradbury. Designed for the 1:12 scale miniature setting. Made of matt finish printed unpasted heavyweight paper. This is a new introduction from Bradbury and Bradbury; the makers of fine historically accurate house wallpapers. The colors are rich and vivid!! Price is per sheet and each sheet measures: Printed Area : 10 1/2 in tall x 16 1/4 in wide. Use with the premixed wallpaper paste available in our store. Most rooms will need 3 sheets of wallpaper to finish.
Step into a timeless space, where midcentury charm meets cozy comfort in this thoughtfully renovated apartment.
From the cheerful hues of the 1950s to the softer, earthier shades that were popular in the 1960s, these paint colors will give your home the perfect splash of midcentury magic.
Miniature planter with faux greenery or flowers in basket. You can select from just faux greenery option or pink flower option. Planter/basket is made of woven fabric. Measures 4.25 inch high with the plant. Diameter is 1.5 inches Listing is for one plant. All other accessories can be purchased separately. This is perfect for Maileg mice and Chelsea barbie.
The Renova Chandelier offers a contemporary design with a nod to midcentury elements. Its unique composition of materials, such as luxurious top-grain leather and walnut finial, combine with aged-brass accents to create a captivating aesthetic.
I’m getting oh-so-close to completing my 1955 Betsy McCall DIY Dollhouse — the last challenge is to find those all-important final touches. Reader Janet offered to share some of her vintage dollhouse accessories, and I took her up on her gracious invitation. Wow, are these tiny drinking glasses just the cutest thing you’ve ever seen? They remind me of my…
NYC-based brinca dada is Doug Rollins and Tim Boyle, who both spent time living in Brazil and fell in love with the beautiful, friendly and fun atmosphere
See how to build a fantastic dollhouse bookcase. Easy to follow and unique features. Inspiration is a Pottery Barn Dollhouse Bookcase that you will surely love!
A powder room near the entrance has Singita wallpaper by Cole & Son. Tagged: Bath Room, Wood Counter, and Undermount Sink. Photo 10 of 16 in Midcentury Meets Aloha at This Revamped Ranch-Style Home in Pasadena. Browse inspirational photos of modern bathrooms.
This printable miniature Christmas gift box set consists of 16 gift boxes and matching wrapping paper. Adorn the boxes with ribbons, etc. and roll up the gift wrap to decorate your modern midcentury dollhouse or roombox for Christmas. ★★★ GIFT BOXES ★★★ Each of the 4 gift box designs comes in 4 different sizes. They are small enough to be used for 1:12 scale and large enough for 1:6 scale. ⭒ SMALL SQUARE: 19mm L x 19mm W x 19mm H ⭒ LARGE SQUARE: 29mm L x 29mm W x 29mm H ⭒ SMALL RECTANGLE: 31mm L x 21mm W x 13mm H ⭒ LARGE RECTANGLE: 43mm L x 31mm W x 7mm H ★★★ INSTRUCTIONS ★★★ 1. Print the gift boxes onto A4 or US Letter lightweight cardstock. 2. Cut along the solid lines and fold along the dotted lines. 3. Glue the boxes together using the white tabs. I recommend using a double-sided adhesive tape roller. If you prefer glue, opt for a high-quality craft glue and be careful not to use too much or else the ink may run and/or the paper might wrinkle. 4. Decorate with ribbons, etc. ★★★ WRAPPING PAPER ★★★ The wrapping paper comes in two different sizes (1:12 scale and 1:6) to be used as rolls of gift wrap. You can also use it to wrap your own miniature boxes. ★★★ FILE FORMAT ★★★ You will not receive any physical items in the mail. This is a digital download available as a PDF file in both A4 and US letter size. Colors may vary slightly depending on your screen/monitor, printer and paper used. ★★★ PLEASE NOTE ★★★ This printable is for personal use only and not for resale or distribution in any digital or physical form. All purchases for digital items in my shop are non-refundable. ★★★ SEE MORE ★★★ Click here to see all of my miniature dollhouse printables: https://www.etsy.com/shop/TheShelfieLife
1:6 Miniature Tulip Chair W/Arms -White&Red, 1/6 Dollhouse Midcentury Modern Accent Arm Chair 📦 This listing includes 1 items: 1 Chair with Cloth Seat (The seat cannot be removed) 🏠 Suitable for 1:6 scale dollhouse display or using with dolls (around 12 inches tall, i.e. barbie, blythe etc.) Approximate Dimension (cm): 📐📏 10 cm(L) x 7.5 cm (W) x 13 cm (H) SHIPPING ✈️ — Free Shipping in Ontario ($59.99+, promotion code: ONSHIPPING), Canada ($69.99+, No code needed), US (US$35+) -All the packages are dispatched from Toronto, Canada (No sub-dispatch delivery from overseas to ensure the quality of products). The shipping postage is estimated based on a trackable delivery with arrival confirmation. The lower rate of shipping without tracking is available on request. Please feel free to contact me for your shipping inquiry. -Combined postage is calculated at the checkout, but overages of shipping fees will be refunded after dispatch. -Please check the shop page for more collections of 1/6 or 1/12 Dollhouse furniture & Accessories ➡️https://www.etsy.com/ca/shop/MiumiuLand
In the fall of 2016, after a two year search, graphic and interior designer Robert Maurer acquired his stunning 1974 Streng Bros. “Transitional Plan” home designed by Architect Carter Sparks.
These midcentury modern dollhouse nightstands or side table can be perfectly paired with dollhouse sofa, chair or miniature bed. They have tapered and angles legs and are drilled in to make the furniture more durable. They are handmade with wood and finished with craft paint. They come in 4 paint choices: white, grey, pink, seagreen 2 inch width, 1.5 inch depth, 2,5 inch height The longer media console is listed separately in my shop. 1:12 scale. Cabinets do not open
Explore diepuppenstubensammlerin's 3062 photos on Flickr!